Thanks, looks good, here is a better image of the stamp it's transparent and blends in better without the sharp edges.rg66 wrote:Here's a wallpaper for Carolina. The original image is from http://www.publicdomainpictures.net so there should be no problem.
Carolina - 1.3
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
transmission
Sorry for my bad English. I use a translator.
I can not use transmission. It just closes. Someone has got it?
Thank you.
I can not use transmission. It just closes. Someone has got it?
Thank you.
Very nice!rg66 wrote:Here's a wallpaper for Carolina. The original image is from http://www.publicdomainpictures.net so there should be no problem.
Edit: Updated with the better logo and added another wallpaper with the "howling carolina".
EDIT: I want to use these with Carolina-002, perhaps one of them as the default. The only thing I'd suggest is moving the logo up 5 to 10 pixels so that it doesn't interfere with the task-bar. Other than that, I find it very tasteful. Well done!
Last edited by elroy on Sun 14 Oct 2012, 17:02, edited 1 time in total.
Thanks very much for your help with this. I will try these settings hopefully tomorrow. Sorry for the newbie style questions, I am Windows savvy but just getting to get grips with the puppy Linux. Carolina is very impressive and fast becoming my operating system of choice.elroy wrote:You can adjust touch-pad settings from the Control Panel in the Hardware section. There two tiers of tabs. On the second tier you'll see Touchpad. Try this first before trying the next suggestion.linux wrote:We did have a problem with the touch-pad playing around I assume it needs a specific driver.
If you can't get it to work from there, try going to Control Panel-->System-->Configure Kernel Modules and choose "click here to add new module". Be patient as it takes quite a while to gather all of the module information. Once it finishes initializing, you'll see two columns. The left will be populated, the right empty. Scroll down the left until you see rt8187, click on it to highlight it, and then click the "Add" button. Click "OK". "EXIT" the Configuration dialog, and then reboot. You'll have to be sure to be using a savefile, as a RAM boot won't save the settings.
Keep up the great work
No problem, linux. And there's no need to apologize. You're precisely the type of user we're developing Carolina for. If you need further assistance, don't hesitate to post or pm Geoffrey or myself.linux wrote:Thanks very much for your help with this. I will try these settings hopefully tomorrow. Sorry for the newbie style questions, I am Windows savvy but just getting to get grips with the puppy Linux. Carolina is very impressive and fast becoming my operating system of choice.
Just as a heads up for everyone that is following this thread. Within the next couple days we will be changing the main post of this thread (the 1st post) into a table of contents. We feel that this will make it easier for users to find what they're looking for. Also, I'm about 2/3'rds of the way finished with creating a newb friendly tutorial on how to install the AMD/ATI graphic driver on Carolina. We're also getting closer to the release of Carolina-002. Included in 002 will be all of the firmware that was missing in 001, all of the patches that were offered for 001, with the latest versions of Firefox/Thunderbird, the latest version of flash offered for linux, and the latest release of the pup-volume-monitor, along with a few other minor enhancements.
Unfortunately, peebee's additions will have to wait until 003. I wanted to add them to 002, but I ran out of time to test them thoroughly.
If you've created wallpaper for Carolina, or are creating wallpaper, please submit your final versions by the 17th of October.
Unfortunately, peebee's additions will have to wait until 003. I wanted to add them to 002, but I ran out of time to test them thoroughly.
If you've created wallpaper for Carolina, or are creating wallpaper, please submit your final versions by the 17th of October.
[SOLVED] Suspend and Hibernate
I have just now checked Carolina's suspend and hibernate options on my Aspire One netbook.
Both options don't work.
I have not tested on other machines as Saluki 023 can bring the netbook on suspend/ hibernate
Both options don't work.
I have not tested on other machines as Saluki 023 can bring the netbook on suspend/ hibernate
Last edited by yerc1 on Mon 15 Oct 2012, 18:56, edited 1 time in total.
Wallpaper
In tribute to jemimah for all the effort she put into Saluki.
- Attachments
-
- SalukiCarolina.JPG
- From the old to the new
- (128.48 KiB) Downloaded 707 times
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Thanks Elroy, it would be an honour to see these in the next release.elroy wrote:Very nice!rg66 wrote:Here's a wallpaper for Carolina. The original image is from http://www.publicdomainpictures.net so there should be no problem.
Edit: Updated with the better logo and added another wallpaper with the "howling carolina".
EDIT: I want to use these with Carolina-002, perhaps one of them as the default. The only thing I'd suggest is moving the logo up 5 to 10 pixels so that it doesn't interfere with the task-bar. Other than that, I find it very tasteful. Well done!
I noticed on both my comps, one being a wide screen, that I had to set the style to "stretch" for it to display properly on Saluki or Windows. The logo was either partially under the taskbar or off the side of the screen.
Anyway, I did redo them in the original size and the logo higher up. See my original post for the edited wallpapers.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Re: Suspend and Hibernate
Hi yerc1,yerc1 wrote:I have just now checked Carolina's suspend and hibernate options on my Aspire One netbook.
Both options don't work.
I have not tested on other machines as Saluki 023 can bring the netbook on suspend/ hibernate
Fortunately I have one of those. Suspend worked for me on both my Aspire and my Toshiba Satellite laptop. Both of my machines have frugal installs on the hard-drive.
On the Toshiba, hibernate caused the system to shut-down without saving to the savefile. On my Aspire, I get a message that states - "You must create a swap space large enough to hold the contents of your RAM before you can hibernate". It appears that a very large swap space would be required for this to work correctly. That would be something that is created when the medium is formatted. If you're using a pen-drive, this could also cause the pen-drive to have a much shorter life-span. If you're using a hard-drive, reformatting may not be an option if you have Windows or other things installed you don't wish to lose or have to re-install.
EDIT: I booted up Saluki-023 without a savefile on my Aspire one. Suspend did nothing, and hibernate gave me the same warning about needing a larger swap space.
- shelezyaka
- Posts: 52
- Joined: Tue 14 Feb 2012, 13:57
- Location: Ukrainian
LSHW - utility shows the characteristics of the equipment is installed on your computer,and also connected to it.
Large database.
Link to download the package - http://yadi.sk/d/O4iQSOM40D2Qj
Large database.
Link to download the package - http://yadi.sk/d/O4iQSOM40D2Qj
Re: Suspend and Hibernate
It could be something I was doing prior to testing as just now, giving both options another go prove they ARE working on Carolina. I don't usually use these options but it's nice to know they work for when the need arises.elroy wrote:Hi yerc1,yerc1 wrote:I have just now checked Carolina's suspend and hibernate options on my Aspire One netbook.
Both options don't work.
I have not tested on other machines as Saluki 023 can bring the netbook on suspend/ hibernate
Fortunately I have one of those. Suspend worked for me on both my Aspire and my Toshiba Satellite laptop. Both of my machines have frugal installs on the hard-drive.
I multiboot Carolina and Saluki off the same pendrive and using Swap on the hard drive.
By the way, I like seeing Table of Contents in the main post. It makes finding information so much easier.
Keep up the good work.
Once again thanks for Carolina!
updating service fixes to Caroline
I have noticed on the download site that some of the files are presented as .001, .002, etc.
Question
Question
- Are these files "iterative" or are they "cumulative"?
- Is there any thought to including a tool such as the "Update" desktop tool that TaZoC has been including in Lighthouse for some time which makes addressing system issues ?
Re: updating service fixes to Caroline
I can only assume that you're referring to the patch files. Yes, they're cumulative. There's already a tool that you can download (it will be included in carolina-002) that will automatically download and install the necessary patch file. Look at the first post on this thread, under the "Patches" link.gcmartin wrote:I have noticed on the download site that some of the files are presented as .001, .002, etc.
QuestionThanks in advance
- Are these files "iterative" or are they "cumulative"?
- Is there any thought to including a tool such as the "Update" desktop tool that TaZoC has been including in Lighthouse for some time which makes addressing system issues ?
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Wanted to uninstall some stuff but almost all of the apps in the applications menu are not listed in the remove builtin packages list, same with gnewpet. The builtin_files folder is missing them.
Also, Bulk Rename is not in the app menu. I changed Categories=Filesystem to FileSystem (capitol S) in the desktop file and it appeared.
Also, Bulk Rename is not in the app menu. I changed Categories=Filesystem to FileSystem (capitol S) in the desktop file and it appeared.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Those are issues that have been fixed for 002. Both Geoffrey and I were aware of the builtin packages list errors, and those have been corrected for the new release. I noticed the Bulk Rename missing icon earlier today and fixed it for 002. The new release will be available within the next couple days. I apologize for the inconvenience, but the adrive for 001 was highly customized, and it introduced the package list errors. For 002, we went back to using the custom builder to create the adrive, and this provides the necessary files for gnewpet to work correctly.rg66 wrote:Wanted to uninstall some stuff but almost all of the apps in the applications menu are not listed in the remove builtin packages list, same with gnewpet. The builtin_files folder is missing them.
Also, Bulk Rename is not in the app menu. I changed Categories=Filesystem to FileSystem (capitol S) in the desktop file and it appeared.
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
No prob, can manually uninstall if need be, but will probably wait for 002.
If I could make a suggestion to make Carolina look a bit nicer (in my opinion anyway), the soothe theme from the repo gives a transparent look to the windows buttons which looks much better than the usual grey.
If I could make a suggestion to make Carolina look a bit nicer (in my opinion anyway), the soothe theme from the repo gives a transparent look to the windows buttons which looks much better than the usual grey.
- Attachments
-
- soothe-1.jpg
- (7.77 KiB) Downloaded 745 times
-
- soothe.jpg
- (11.14 KiB) Downloaded 777 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]