Fatdog64-600 Final and 601 (July 2012)
I know many of you will smile on this one , but I have a version quite FAT , with VirtualBox , JDK, Catalyst , manpages and other pets on it .
I was wondering if there would be possible booting from a blueray disc , using Pburn to write it .
My DVD disc ( 8x )takes more than 1 minute to boot , so since I got the drive I thought I could use this way to make it boot quicker.
I'm using Fatdog64 LiveDisc with no savefile and often no hard disk attached . It's fast , reliable and sometimes has tools which are hardly free in other platforms.
Thank you guys for continuing to develop this very useful project
I was wondering if there would be possible booting from a blueray disc , using Pburn to write it .
My DVD disc ( 8x )takes more than 1 minute to boot , so since I got the drive I thought I could use this way to make it boot quicker.
I'm using Fatdog64 LiveDisc with no savefile and often no hard disk attached . It's fast , reliable and sometimes has tools which are hardly free in other platforms.
Thank you guys for continuing to develop this very useful project
Thanks Kirk, it seemed to have done the trick! Since Xampp localhost comes up fine with wpa_gui enabled, it's a non-issue at this point. Cheers!That's a bug, when you quit or don't use the wpa_gui, the local loop-back is not setup. That will be fixed in the next release. I've attached a pet to fix that. I don't have any helpful ideas about the other problem.
Yet Another Dialog (YAD) for Fatdog64.
http://www.smokey01.com/software/Fatdog ... x86_64.pet
For those of you who have never tried it, it great.
http://code.google.com/p/yad/
http://www.smokey01.com/software/Fatdog ... x86_64.pet
For those of you who have never tried it, it great.
http://code.google.com/p/yad/
Great Smokey01. Everyone of us can benefit.smokey01 wrote:I've been looking for a really good search application for some time and last night I discovered recoll ....
There's another solution that you may also find, not only for search, but also for many-many other things which you and most of us do, commonly. This can all be done in one desktop screen.
Pemasu created the one I use and JamesBond also found another similar tool.
IT is a dual screen FM that very few (excepting Windows admins) are aware of muCommander and emelFM2. They can be found here
Since muCommander is a Java app, its a no-brainer to run, but, the PET will install a Menu path for you. Easy to use, Fast, Stable, Fully Featured, for most admins and users!
The apparent beauty is that its all built into the single package and not just a bunch of single snippets. The integration is all present, on screen, in front of you.
I hope you can review. You might be surprised and I'm sure you'll understand.
here to help.
1st of all, to me Fatdog64 is the best Linux distro.
I set it up on Foxconn NT-A3500 Nettop (AMD E350 Dual-Core 1.6GHz).
It boots and runs fast (from SSD drive).
Problems/bugs:
- After installation of ATI catalist screen resolution went out of range.
- After installation of the LXpanel "Add to Desktop" does not work.
- It's not possible to get only IP from DHCP server and specify DNS IP manually.
- Max screen DPI is limited to 108.
- No GUI to set WatCom tablet, though it somehow works anyway.
Requests for improvements:
- Better description of pets - currently we can see short info and only as a tooltip.
- Click on desktop background should unshade currently shaded icon(s).
- Click on desktop background should close "start"-menu.
- Help on boot options should be visible at startup (I don't have it after HDD installation).
- HDD installation - copy existing savefile and prompt for boot options.
- I had to install Grub4Dos to specify boot options.
(particularly savefile=direct:device:sda1)
- Choice of single/double click mode should be available at R-click menu on the desktop.
- In the new releases, please verify that it is possible to disable IPV6, especially for the wireless.
- Sound card selection - add "test" option.
- "Windows"-btn should open "start"-menu.
- Click on CPU usage in the toolbar should open Task Manager
- Installation should ask if Wifi autoconnect is OK.
- More cursor themes - currently I don't see that app is starting.
Requests for new Pets:
- VMware integration drivers - just to make it easy to try/test.
- TuxCommander - in my opinion it's the best dual-panel file manager for Linux. BTW, it has advanced search.
http://tuxcmd.sourceforge.net/description.php
Executable for Debian works right out of the box, no libraries needed.
http://packages.debian.org/search?keywords=tuxcmd
Questions:
- How to add items (applications, control panel items) to Desktop, how to remove?
- I see appname.desktop files under /usr and /.usr, can I use them to create Desktop items?
- How to create a pet out of existing (debian) package?
- Which directories would survive FatDog update, and which go to a savefile?
I set it up on Foxconn NT-A3500 Nettop (AMD E350 Dual-Core 1.6GHz).
It boots and runs fast (from SSD drive).
Problems/bugs:
- After installation of ATI catalist screen resolution went out of range.
- After installation of the LXpanel "Add to Desktop" does not work.
- It's not possible to get only IP from DHCP server and specify DNS IP manually.
- Max screen DPI is limited to 108.
- No GUI to set WatCom tablet, though it somehow works anyway.
Requests for improvements:
- Better description of pets - currently we can see short info and only as a tooltip.
- Click on desktop background should unshade currently shaded icon(s).
- Click on desktop background should close "start"-menu.
- Help on boot options should be visible at startup (I don't have it after HDD installation).
- HDD installation - copy existing savefile and prompt for boot options.
- I had to install Grub4Dos to specify boot options.
(particularly savefile=direct:device:sda1)
- Choice of single/double click mode should be available at R-click menu on the desktop.
- In the new releases, please verify that it is possible to disable IPV6, especially for the wireless.
- Sound card selection - add "test" option.
- "Windows"-btn should open "start"-menu.
- Click on CPU usage in the toolbar should open Task Manager
- Installation should ask if Wifi autoconnect is OK.
- More cursor themes - currently I don't see that app is starting.
Requests for new Pets:
- VMware integration drivers - just to make it easy to try/test.
- TuxCommander - in my opinion it's the best dual-panel file manager for Linux. BTW, it has advanced search.
http://tuxcmd.sourceforge.net/description.php
Executable for Debian works right out of the box, no libraries needed.
http://packages.debian.org/search?keywords=tuxcmd
Questions:
- How to add items (applications, control panel items) to Desktop, how to remove?
- I see appname.desktop files under /usr and /.usr, can I use them to create Desktop items?
- How to create a pet out of existing (debian) package?
- Which directories would survive FatDog update, and which go to a savefile?
Later: Tried on P4/3.4G/1Mb/ liveCD - managed to connect during liveCD session. Will clear the bench tomorrow and go back & look at some of the older machines again. This result is pointing to a HW issue although Mint is usually reliable, but not this time. Suggesting that Web claims that the ISL3887 chip isn't 64bit compatible are incorrect and smokey/kirk have got it right. Well done guys!1. What are the [vendor:product] ID codes? I need more than "Cohiba/aka you-name-it/ ...and Netgear wg111"
The item I possess is badged Inventel. It has the Intersil ISL3887 aka Netgear wg111 aka Prism054g chip. Also badged Cohiba 3887 rev0 and (OEM) Wiston NeWeb UR054g. It has a terrible track record on the InterWeb, but it does work entirely satisfactorily in some distros, notably PCLOS 2012-02 Phoenix Xfce and sometimes, some Puppies (can't remember which at this stage - too much water under the bridge.)
2. Is the p54usb module getting loaded?
Invariably: Yes, but might be a few exception as with all systems/SW
3. What does the command "dmesg | grep firmware" report?
Will report later.
4. In what Puppy version is the device confirmed to work?
see above. Sometimes it will light up, connect but not function - there are other reports, other systems, other distros reporting this on the InterWeb.
5. What exactly is its problem in Fatdog? It never connects? It drops out?
Will confirm next week when fully back to testing.
6. Please explain this comment from your first post.
One of the distros I run permanently is Linux Mint Xfce 64 bit - dongle doesn't fire up on this system.
If your laptop is too new then you just have to wait until AMD releases better Catalyst driver. Does the standard radeon driver work for you?alexei wrote:- After installation of ATI catalist screen resolution went out of range.
I don't understand what you mean.- After installation of the LXpanel "Add to Desktop" does not work.
It is possible but there is no GUI for that. You have to edit some stuff from /libexec/dhcp-run-hooks.- It's not possible to get only IP from DHCP server and specify DNS IP manually.
Edit .Xresources in your home directory. You can put any dpi value you wish.- Max screen DPI is limited to 108.
Yup. In my experience you only need GUI for tablets (ie, for calibration). For anything else, you can use "xsetwacom" or "xinput".- No GUI to set WatCom tablet, though it somehow works anyway.
What do you have in mind?- Better description of pets - currently we can see short info and only as a tooltip.
This is controlled by openbox. If you can find how to make openbox behaves that way, let me know. (Not that I'm going to do it by default, but we can probably make it as a pet).- Click on desktop background should unshade currently shaded icon(s).
It does.- Click on desktop background should close "start"-menu.
It is always there. Point your browser to /usr/share/doc/home.html.- Help on boot options should be visible at startup (I don't have it after HDD installation).
???- HDD installation - copy existing savefile and prompt for boot options.
That's why they are called "boot options". You need to specify them from your boot-loader, whatever your choice of boot loader is.- I had to install Grub4Dos to specify boot options.
(particularly savefile=direct:device:sda1)
Unfortunately that's not how Rox works.- Choice of single/double click mode should be available at R-click menu on the desktop.
IPv6 is disabled by default. You need to explicitly load "ipv6" module to enable it.- In the new releases, please verify that it is possible to disable IPV6, especially for the wireless.
Yes, nice to have.- Sound card selection - add "test" option.
Alt-F1 opens "Start" menu. You can change the key to anything else by editing /root/.config/openbox/rc.xml (if you are running as root).- "Windows"-btn should open "start"-menu.
Yes, nice to have, but probably won't happen unless someone re-writes the CPU usage applet.- Click on CPU usage in the toolbar should open Task Manager
You won't be connected to wifi anyway if you don't have the password.- Installation should ask if Wifi autoconnect is OK.
Nothing to do with the cursor themes, more to do with the application itself.- More cursor themes - currently I don't see that app is starting.
We cannot redistribute commercial software.- VMware integration drivers - just to make it easy to try/test.
Yes, nice to have. Perhaps we should just repackage it as a pet.- TuxCommander - in my opinion it's the best dual-panel file manager for Linux. BTW, it has advanced search. http://tuxcmd.sourceforge.net/description.php
Executable for Debian works right out of the box, no libraries needed.
http://packages.debian.org/search?keywords=tuxcmd
All you see in Desktop is "shortcut". You can see all the applications in /usr/share/applications. Drag and drop from there to desktop. You can also drag-and-drop any files / document / folders to the desktop, they will be created as shortcuts to the corresponding files/document/folders.- How to add items (applications, control panel items) to Desktop, how to remove?
To remove, right-click and then choose "remove item".
No.- I see appname.desktop files under /usr and /.usr, can I use them to create Desktop items?
Plenty of information in this forum and the wiki, I will not repeat it here again. Please search for it.- How to create a pet out of existing (debian) package?
Depends on how you run Fatdog and how you perform the update. Generally speaking, Fatdog does not delete anything.- Which directories would survive FatDog update, and which go to a savefile?
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]
What can this error message be about?
I tried to activate the FatDog PPM and
it shows this message
I wanted to install the Pup-Advert-Blocker
that Stu91 recommended it is usually
available on Puppy? I have never used it before
but wanted to try it on his recommendation.
any suggestion what to do. I never reached PPM
I have a rather late FD 64 600
on a Acer Netbook D255 Frugal install on NTFS.
I tried to activate the FatDog PPM and
it shows this message
I wanted to install the Pup-Advert-Blocker
that Stu91 recommended it is usually
available on Puppy? I have never used it before
but wanted to try it on his recommendation.
any suggestion what to do. I never reached PPM
I have a rather late FD 64 600
on a Acer Netbook D255 Frugal install on NTFS.
- Attachments
-
- gtk error.jpg
- (89.83 KiB) Downloaded 1091 times
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
very urgent warning against Fatdog 600
very urgent warning against Fatdog 600
I did loose 10 minutes before 32 GByte important personal data because of the totaly silly dilly names of the drives and partitions in Fatdog 64.
fatdog does NOT FOLLOW the Puppy linux usages in this matter or creating the save file!
you can't save you dates as usual! it is very very very dangerous for your work:
Fatdog renames export and destinations partitions or USB so, that you can't not recognize them any more!!!!
it is non sens pure!
I did loose 10 minutes before 32 GByte important personal data because of the totaly silly dilly names of the drives and partitions in Fatdog 64.
fatdog does NOT FOLLOW the Puppy linux usages in this matter or creating the save file!
you can't save you dates as usual! it is very very very dangerous for your work:
Fatdog renames export and destinations partitions or USB so, that you can't not recognize them any more!!!!
it is non sens pure!
explanation
Naming of the traditional "home" partition of frugal installations:
if your frugal installation is on /dev/sda3
and you work with an external usb memory on /dev/sb1
number of drive can be an other in your case
and hit on the sb1 icon available on the screen, the window being opened by this hitting is named correctly /mnt/sb1
and following subdirectories open affiliated path names (for ex. /mnt/sb1/my_subdir)
if you hit on the sda1 partition's icon available on the screen, the window being opened by this hitting is named correctly /mnt/sda1
and following subdirectories open affiliated path names (for ex. /mnt/sda1/my_subdir)
but not on your traditional puppy /mnt/home (in my case /dev/sda3)
the windows will not be named /mnt/sda3
it will not be named /mnt/home
it will not be named home
it will not be named /initrd/mnt/pup_ro2 as appearing in some puppy's
but
fatdog601 did introduce a new confusing name /aufs/devsave and then /aufs/devsave/my_subdir !
Creation of savefiles:
I have now 2 fd64save.ext?
why?
and they are not in the subdir attributed to fatdog but in the root of the partition! hm
I did create the first one in ext3 because I will access to all parts of the system not only with new puppy's but with each other old puppy or other linux versions
after newstart, fatdog did not recognize the fd64save.ext3 and did require the creation of a new one
why?
I don't know?
- the save file is too big? (3 Gb as 64 bit things are more heavy as 32 bits one are)
- I did attribute my usual laptop network name (I don't understand this unusual complication making the result uncertain as I am constating now!)
- and password of course, as the puppy world is not using only one password (of course, I know today woofwoof! but what is the matter after 1/2 year?)
certain is: the creation of the first file containing data did happen, but it was not recognized by fatdog.
for the second one, I did let all the proposed values as they were but it is nonsens to ask for other values and make only irritation of the user, if you are not free to give other or uncertain after that, that the file is valid!
and I can't really see which one of both save file fatdog601 is really using though I can see to icons in rox with the special symbolic "savefile"!
(suppl. info: I did start using Grub2 without event. parameter for savefile.
suppl. remark: it is bad to name initrd differently as in other puppy's: to have a transparent menu for Grub2, I never introduce new puplets into the menu. I only change the name of the directory into «puppy», what else, and have so only 2 entries for puppy in that menu: the actual puplet in use, always named «puppy», and the last version published by Barry Kauler itself working without problem on the one PC I am actually using, desktop or laptop, as «puppy recovery» on a very little separate partition (so that it is possible to use gparted without restrictions on the big partition where the other puppy's are, and rename the actual puplet directory having to be named «puppy]. If the name of initrd is exceptionally not the same as usual, this very organisation practicable organisation not possible any more and if each puplet creator does that, i will need again a Grub2 menu with extension!)
Naming of the traditional "home" partition of frugal installations:
if your frugal installation is on /dev/sda3
and you work with an external usb memory on /dev/sb1
number of drive can be an other in your case
and hit on the sb1 icon available on the screen, the window being opened by this hitting is named correctly /mnt/sb1
and following subdirectories open affiliated path names (for ex. /mnt/sb1/my_subdir)
if you hit on the sda1 partition's icon available on the screen, the window being opened by this hitting is named correctly /mnt/sda1
and following subdirectories open affiliated path names (for ex. /mnt/sda1/my_subdir)
but not on your traditional puppy /mnt/home (in my case /dev/sda3)
the windows will not be named /mnt/sda3
it will not be named /mnt/home
it will not be named home
it will not be named /initrd/mnt/pup_ro2 as appearing in some puppy's
but
fatdog601 did introduce a new confusing name /aufs/devsave and then /aufs/devsave/my_subdir !
Creation of savefiles:
I have now 2 fd64save.ext?
why?
and they are not in the subdir attributed to fatdog but in the root of the partition! hm
I did create the first one in ext3 because I will access to all parts of the system not only with new puppy's but with each other old puppy or other linux versions
after newstart, fatdog did not recognize the fd64save.ext3 and did require the creation of a new one
why?
I don't know?
- the save file is too big? (3 Gb as 64 bit things are more heavy as 32 bits one are)
- I did attribute my usual laptop network name (I don't understand this unusual complication making the result uncertain as I am constating now!)
- and password of course, as the puppy world is not using only one password (of course, I know today woofwoof! but what is the matter after 1/2 year?)
certain is: the creation of the first file containing data did happen, but it was not recognized by fatdog.
for the second one, I did let all the proposed values as they were but it is nonsens to ask for other values and make only irritation of the user, if you are not free to give other or uncertain after that, that the file is valid!
and I can't really see which one of both save file fatdog601 is really using though I can see to icons in rox with the special symbolic "savefile"!
(suppl. info: I did start using Grub2 without event. parameter for savefile.
suppl. remark: it is bad to name initrd differently as in other puppy's: to have a transparent menu for Grub2, I never introduce new puplets into the menu. I only change the name of the directory into «puppy», what else, and have so only 2 entries for puppy in that menu: the actual puplet in use, always named «puppy», and the last version published by Barry Kauler itself working without problem on the one PC I am actually using, desktop or laptop, as «puppy recovery» on a very little separate partition (so that it is possible to use gparted without restrictions on the big partition where the other puppy's are, and rename the actual puplet directory having to be named «puppy]. If the name of initrd is exceptionally not the same as usual, this very organisation practicable organisation not possible any more and if each puplet creator does that, i will need again a Grub2 menu with extension!)
Now I am as my name say a noob and not on your level.
But wanted to comment on this one
"I did start using Grub2 without event. parameter for savefile. "
I've asked the Devs of different Puppy variations about Puppy
and Grub2 and as far as I know all of them say that of one want
to use Grup 2 one are on ones own. Officially it is not supported?
But I can be wrong about that one. It is what I remember
and FatDog is it's own policy I guess so maybe them
are into supporting grub2.
But wanted to comment on this one
"I did start using Grub2 without event. parameter for savefile. "
I've asked the Devs of different Puppy variations about Puppy
and Grub2 and as far as I know all of them say that of one want
to use Grup 2 one are on ones own. Officially it is not supported?
But I can be wrong about that one. It is what I remember
and FatDog is it's own policy I guess so maybe them
are into supporting grub2.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Yup, the fatdog package manager is a little brittle. If you use foreign packages, things like this can happen. I've attached an updated package manager pet, please install this and see if it fixes your problem.nooby wrote:What can this error message be about?
I tried to activate the FatDog PPM and
it shows this message
I wanted to install the Pup-Advert-Blocker
that Stu91 recommended it is usually
available on Puppy? I have never used it before
but wanted to try it on his recommendation.
any suggestion what to do. I never reached PPM
I have a rather late FD 64 600
on a Acer Netbook D255 Frugal install on NTFS.
It it doesn't, then I'm interested in your copy of /root/.packages/user-installed-packages.
- Attachments
-
- fdpm-update.pet
- (6.64 KiB) Downloaded 769 times
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]
slackfan, I'm sorry to hear your data loss. Did you read the first page of this thread, though? Fatdog is a little different from other puppies.
Nooby, Fatdog is boot-loader-agnostic. As long as the bootloader is capable of booting linux, it should be able to load Fatdog. I don't use Grub2 myself so I can't help here.
Nooby, Fatdog is boot-loader-agnostic. As long as the bootloader is capable of booting linux, it should be able to load Fatdog. I don't use Grub2 myself so I can't help here.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]
Yes I trust that I do get it on that level but that is not what I talk aboutjamesbond wrote:...
Nooby, Fatdog is boot-loader-agnostic.
As long as the bootloader is capable of booting linux,
it should be able to load Fatdog. I don't use Grub2 myself
so I can't help here.
but I agree that my text could be very misleading so maybe
we can just drop it as highly derailing this thread.
Thanks for the pet. But maybe I need to ask if FatDog does have
the Pup-Advert-Blocker and Grandr at all?
No need to go to PPM if these two are not there?
I've solved it using Lupu instead so overkill to
also solve it with Fatdog. I am more used to Lupu.
see this solved problem
http://www.murga-linux.com/puppy/viewtopic.php?t=81501
Hacking audio using Lupu. I wanted to test FatDog to see
if that solved the hacking audio.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Catalist works fine. The problem was that it set max resolution video card is capable of and it was too high for the monitor. So, I rebooted with vesa kernel option, and changed display resolution. To eliminate this hassle Catalist-pet should update catalist settings to the screen resolution that is current when it installs.If your laptop is too new then you just have to wait until AMD releases better Catalyst driver. Does the standard radeon driver work for you?After installation of ATI catalist screen resolution went out of range.
I don't have browser at bootup (in the situation above I had to go to another computer to find how to specify vesa option).It is always there. Point your browser to /usr/share/doc/home.html.Help on boot options should be visible at startup (I don't have it after HDD installation).
Without LXpanel-pet right click does not give an option "Add to desktop". When LXpanel-pet is installed, I get this option, but it does not add to desktop.I don't understand what you mean.After installation of the LXpanel "Add to Desktop" does not work.
Thanks for the suggestion. Others have it, please add GUI for this / modify existing.It is possible but there is no GUI for that. You have to edit some stuff from /libexec/dhcp-run-hooks.It's not possible to get only IP from DHCP server and specify DNS IP manually.
Thanks for the suggestion. Others have it, please fix the GUI.Edit .Xresources in your home directory. You can put any dpi value you wish.Max screen DPI is limited to 108.
Thanks for the suggestion. As it's rather rare hardware, making GUI for it can wait, but not foreverYup. In my experience you only need GUI for tablets (ie, for calibration). For anything else, you can use "xsetwacom" or "xinput".No GUI to set WatCom tablet, though it somehow works anyway.
Additional Description0-column in the Pets-table, preferably searchable.What do you have in mind?Better description of pets - currently we can see short info and only as a tooltip.
I'll let you know.This is controlled by openbox. If you can find how to make openbox behaves that way, let me know. (Not that I'm going to do it by default, but we can probably make it as a pet).Click on desktop background should unshade currently shaded icon(s).
It does, unless you switch to double-click desktop.It does.Click on desktop background should close "start"-menu.
What I meant is that installation better ask if user wants to keep SaveFile contents, change its size and options. It's not unusual that user desides to do HDD installation when he "played" with FatDog for a while and and already has a lot of changes applied.???HDD installation - copy existing savefile and prompt for boot options.
As FatDog provides a feature to do Installation (including setting up some boot loader) it would be natural if it would ask about boot options and put them in the right place.That's why they are called "boot options". You need to specify them from your boot-loader, whatever your choice of boot loader is.I had to install Grub4Dos to specify boot options.
(particularly savefile=direct:device:sda1)
I switched my desktop to double-click.Unfortunately that's not how Rox works.Choice of single/double click mode should be available at R-click menu on the desktop.
I'm glad Please keep it this way.IPv6 is disabled by default. You need to explicitly load "ipv6" module to enable it.In the new releases, please verify that it is possible to disable IPV6, especially for the wireless.
Thanks for the info. It would be nice to have as default (in addition to Alt+F1?).You can change the key to anything else by editing /root/.config/openbox/rc.xml (if you are running as root)."Windows"-btn should open "start"-menu.
Alt-F1 opens "Start" menu.
I thought it could be handled by OpenBox or something like that.Yes, nice to have, but probably won't happen unless someone re-writes the CPU usage applet.Click on CPU usage in the toolbar should open Task Manager
Not really. I got connected to my neibhor's "Guest" wi-fi. Potentially it's security risk, and sometime it's rather inconvenient.You won't be connected to wifi anyway if you don't have the password.Installation should ask if Wifi autoconnect is OK.
If you have FatDog running in VmWare player (freeware) you can click Install VMware Tools and get VMware CD mounted in your VM as /mnt/sr0 . CD contains VMwareTools.someid.tar.gz and What I would love to have is to start something, which would take care of the restWe cannot redistribute commercial software.VMware integration drivers - just to make it easy to try/test.
It works, though each time after dragging from /usr/share/applications I have to right-click and "Edit Item" to remove ".application" from the name - not good.All you see in Desktop is "shortcut". You can see all the applications in /usr/share/applications. Drag and drop from there to desktop. You can also drag-and-drop any files / document / folders to the desktop, they will be created as shortcuts to the corresponding files/document/folders. To remove, right-click and then choose "remove item".How to add items (applications, control panel items) to Desktop, how to remove?
Before asking I read http://distro.ibiblio.org/fatdog/web/fa ... ckage.html and did not find the answer to my question. Let me re-phrase: what are exact steps to make a pet out of debian package file (deb)? Can such conversion be automated/scripted?Plenty of information in this forum and the wiki, I will not repeat it here again. Please search for it.How to create a pet out of existing (debian) package?
FatDog64 comes very close to being perfect. My concern (and I hope yours) is to make it free of concerns/problems/difficulties. I tried several Linux distributions and found FatDog the best (both conceptually and in its implementation).
GParted missing a key feature.
@Fatdog Developers
Should the next FATDOG be contributed, would you please add the GPArted feature for Partition Recovery, please. It has no negatives or downsides. But, I sure you agree, this has potentilal "But-saving" benefit. This feature should be OOTB, for no user should be confused why it doesn't work or is missing.
Thanks in advance.
Should the next FATDOG be contributed, would you please add the GPArted feature for Partition Recovery, please. It has no negatives or downsides. But, I sure you agree, this has potentilal "But-saving" benefit. This feature should be OOTB, for no user should be confused why it doesn't work or is missing.
Thanks in advance.
Re: GParted missing a key feature.
gpart is now in the pet repo and will be built into next release of Fatdog if / when it is released. Please note that I have not tested whether this tool works - for all you know it may cause worse corruption! Unless you have personally tested this tool and confirmed that it works, please do not advertise it as a working recovery tool. I got the source from Debian as the original author stopped maintaining it long time ago.gcmartin wrote:@Fatdog Developers
Should the next FATDOG be contributed, would you please add the GPArted feature for Partition Recovery, please. It has no negatives or downsides. But, I sure you agree, this has potentilal "But-saving" benefit. This feature should be OOTB, for no user should be confused why it doesn't work or is missing.
Thanks in advance.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]
-
- Posts: 361
- Joined: Fri 27 May 2011, 17:21
- Location: Reading UK
Hello Kirk & jamesbond
If you do an updated Fatdog, could I request an update to VLC, please?
VLC 2.01 has a bug which is a bit of a nuisance. From time to time something in it grabs the keyboard input. Then spacebar opens the media menu rather than pausing the video, and the keyboard navigation stops working.
Oddly, it also caused a problem typing URLs in Opera. It turned out that Opera was loading the VLC plugin. Disabling the plugin fixed the probem in Opera.
I think the bug was fixed in VLC 2.02 because it has this in the changelog: * Fix for key events and focus loss
This week they have released VLC 2.04
Fatdog + VLC is my favourite way of playing back my recordings from satellite.
With XRANDR panning and gamma and the updated lxpanel to autohide the taskbar, I can almost get VLC to do sizing/cropping/centreing the way I want it, for both HD and SD recordings.
Thank you for that.
If you do an updated Fatdog, could I request an update to VLC, please?
VLC 2.01 has a bug which is a bit of a nuisance. From time to time something in it grabs the keyboard input. Then spacebar opens the media menu rather than pausing the video, and the keyboard navigation stops working.
Oddly, it also caused a problem typing URLs in Opera. It turned out that Opera was loading the VLC plugin. Disabling the plugin fixed the probem in Opera.
I think the bug was fixed in VLC 2.02 because it has this in the changelog: * Fix for key events and focus loss
This week they have released VLC 2.04
Fatdog + VLC is my favourite way of playing back my recordings from satellite.
With XRANDR panning and gamma and the updated lxpanel to autohide the taskbar, I can almost get VLC to do sizing/cropping/centreing the way I want it, for both HD and SD recordings.
Thank you for that.