XFCE/LXDE/MATE Desktops for ArchPup 13.2/13.2.1
Almost missed that problem with firefox.desktop. So please, If there are problems
with files from archapps.sfs report them on Standard ArchPup 13.2.1 topic not xfce related one.
Currently firefox has Categories=Application;Network;
it's listed under Internet in the Openbox menu.
Change it to Categories=Application;WebBrowser, and it moves to Other
Try with Categories=Application;Internet again it moves to category Other
WTF
Later:
Ok, think I've found it
Test this in XFCE:
Categories=Network;WebBrowser;
with files from archapps.sfs report them on Standard ArchPup 13.2.1 topic not xfce related one.
Currently firefox has Categories=Application;Network;
it's listed under Internet in the Openbox menu.
Change it to Categories=Application;WebBrowser, and it moves to Other
Try with Categories=Application;Internet again it moves to category Other
WTF
Later:
Ok, think I've found it
Test this in XFCE:
Categories=Network;WebBrowser;
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Edit SFS
Here's EDIT SFS gz or xz compression for Archpup XFCE, Thunar right click menu. Since I apparently suck at making Arch packages, just extract the files and put editsfs in /usr/bin, uca.xml in /root/.config/Thunar and squasefs-image in /usr/share/pixmaps then restart Thunar.
Normally it would use a pinstall for everything but since there isn't a uca.xml by default it won't work untill you make a custom action and a uca.xml is created.
Edit: It's not rebuilding the sfs so I've taken it down until I can sort it out
Normally it would use a pinstall for everything but since there isn't a uca.xml by default it won't work untill you make a custom action and a uca.xml is created.
Edit: It's not rebuilding the sfs so I've taken it down until I can sort it out
Last edited by rg66 on Sun 10 Feb 2013, 09:48, edited 3 times in total.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
I'm now running XFCe
Setting firefox.desktop to
Categories=Network;WebBrowser;
makes it show under both> Internet and Network
I'm not going to change anything, if you have some ideas let me know.
stif, will you add some different text editor, or should I move geany to arch apps
... or maybe It's good as is currently
Setting firefox.desktop to
Categories=Network;WebBrowser;
makes it show under both> Internet and Network
I'm not going to change anything, if you have some ideas let me know.
stif, will you add some different text editor, or should I move geany to arch apps
... or maybe It's good as is currently
to tell u the truth sim, i'd like to see geany in archapps, and we keep the desktop.sfs files free of any text editor. because the users can be so particular about them.
i'd say the same for the network manager. i'd like to remove wicd/pwireless2 from the desktop environments...and have a universal one included in archapps.
and even though the Internet submenu looks kinda good in the list, it's not flowing well with the complete layout. So i'm going to edit it out of the applications.menu. the app names should then continue to fall under only 'Network'.
i'd say the same for the network manager. i'd like to remove wicd/pwireless2 from the desktop environments...and have a universal one included in archapps.
and even though the Internet submenu looks kinda good in the list, it's not flowing well with the complete layout. So i'm going to edit it out of the applications.menu. the app names should then continue to fall under only 'Network'.
Just remembered that openbox version needs geany for displaying help file, plus there's geany launcher
in tint2 panel. I must have it in adrv_openbox or bellow sfs, so decision is that geany moves to archpup sfs.
For users with openbox WM, it doesn't make difference but this way geany will be available for all the others...
in tint2 panel. I must have it in adrv_openbox or bellow sfs, so decision is that geany moves to archpup sfs.
For users with openbox WM, it doesn't make difference but this way geany will be available for all the others...
ouch!...moving it into the archpup.sfs makes it undeletable...only hideable. if geany is in the main.sfs.....that kills the 'BareBones' solution. Now if mousepad, or leafpad is really my favorite, and i happen to hate geany...i have to 'pretend' like geany isn't still there. There's got to be another way.simargl8 wrote:Just remembered that openbox version needs geany for displaying help file, plus there's geany launcher
in tint2 panel. I must have it in adrv_openbox or bellow sfs, so decision is that geany moves to archpup sfs.
For users with openbox WM, it doesn't make difference but this way geany will be available for all the others...
i could just put mousepad, which is xfce's default text editor, in the xfce.sfs. and geany in the openbox, and kwrite in kde... that may be the best that it can get. still the ultimate best would be if they are able to choose which editor, for any of the desktops.
there's also a few themes in the main.sfs, as well as the wallpaper, and the login sound.
i think you should keep the base, just as clean as a whistle.
You are right with goal of keeping base as clean as possible
I have reverted geany changes, it stays in adrv_openbox
And yes there are some themes in main sfs file
Archpup is default theme for gtk3, gtk2 and openbox
It is there as fallback because standard Clearlooks doesn't support gtk3
Archpup actually contains different themes (see readme file), but with my little modifications
I have reverted geany changes, it stays in adrv_openbox
And yes there are some themes in main sfs file
Archpup is default theme for gtk3, gtk2 and openbox
It is there as fallback because standard Clearlooks doesn't support gtk3
Archpup actually contains different themes (see readme file), but with my little modifications
does lsmod show nvidiafb on carolina? i'm thinking that has something to do with it. on my computer i'm also seeing an nvidiafb, as well as rivafb. on archpup12.12...rivafb is in /etc/modprobe.d/blacklist.conf.....in 13.2, the blacklist.conf file is empty. and manually editing it, saving the changes, and rebooting.....the changes vanishes. the file is completely again.rg66 wrote:lsmod shows nvidiafb. With the other sfs this issue could be fixed with xfwm4 --replace. What did you change exactly? I've never seen this choose panel thing before, I'm trying to see what file it changes and if I can get it to load a predefined panel like Saluki/Carolina etc....
And i really...i didn't change anything. i was getting the crash with the first sfs, but not the second...so thought maybe the resquashing fixed it. that question about the panels on startup is not a script or anything that i wrote separately. it's coded somewhere in xfce. it pops up automatically when the folder /root/.config/xfce4...doesn't exist. i'm thinking if you were to do a pfix=ram, on carolina...and delete that folder, restart X....you'll see the popup. i tried downgrading the panel to 4.8...same issue....downgrade to 4.6...issue disappears. 4.8 would've been acceptable had it worked. 4.6 though is so dated and old school looking that it's totally out the question.
Archpupy 13.2
I tried to install Bluetooth. However, lot of dependency problem. Please provide Bluetooth.SFS file. I don't have required knowledge in this regard. Hence my request. We can make use of Bluetooth when need arise.
I have not find any email client in Arch puppy ?
I have not find any email client in Arch puppy ?
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
In Carolina it loads vesa and I change it to nouveau. But in my save file I installed the nvidia driver.
After some more testing and a hundred reboots, if you open xfce terminal auto hide works until the terminal is closed! Strange.
As for the question of having a text editor, YES PLEASE. It's a real pain testing and having to install one every time.
Edit: I took out the nvidia card and am using the onboard intel graphics and problem solved, but I don't have this issue on Carolina with xfce 4.10 and nvidia card.
After some more testing and a hundred reboots, if you open xfce terminal auto hide works until the terminal is closed! Strange.
As for the question of having a text editor, YES PLEASE. It's a real pain testing and having to install one every time.
Edit: I took out the nvidia card and am using the onboard intel graphics and problem solved, but I don't have this issue on Carolina with xfce 4.10 and nvidia card.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
i had a feeling the problem was with nvidia card. more so....the nvidiafb/rivafb. when, exactly like you said...it should be nv or nouveau.rg66 wrote:In Carolina it loads vesa and I change it to nouveau. But in my save file I installed the nvidia driver.
After some more testing and a hundred reboots, if you open xfce terminal auto hide works until the terminal is closed! Strange.
As for the question of having a text editor, YES PLEASE. It's a real pain testing and having to install one every time.
Edit: I took out the nvidia card and am using the onboard intel graphics and problem solved, but I don't have this issue on Carolina with xfce 4.10 and nvidia card.
Last edited by stifiling on Sun 10 Feb 2013, 16:50, edited 1 time in total.
Re: Archpupy 13.2
rameshiyer,rameshiyer wrote:I tried to install Bluetooth. However, lot of dependency problem. Please provide Bluetooth.SFS file. I don't have required knowledge in this regard. Hence my request. We can make use of Bluetooth when need arise.
I have not find any email client in Arch puppy ?
all you have to install to use bluetooth on archpup is blueman. if you have a stereo bluetooth headset, also install pavucontrol and pulseaudio:
Code: Select all
pacman -S blueman pavucontrol pulseaudio
It looks like you've gotten your Mobile Partner situation all sorted out. Did you have to pull the libs out of Precise? or did you use the 'downgrade' script?
Archpupy 13.2
I regret to inform you that my problem of 3G mobile partner still not solved. There is no sign of connection in mobile partner. I will PM the link of mobile partner software for checking at your end after download. I got only one file from Precise Puppy. Other file Symlink file. I don't find any other details about this file. I don't know whether downgrade worked or not. What is exact command for downgrade. $ downgrade icu is correct?
Please pardon me for troubling you.
Please pardon me for troubling you.
from a test save file, try this package. and then Mobile Partner run from command line again. and see if u're still getting the exact same error as before.
install the package with:
install the package with:
Code: Select all
pacman -U /path/to/icu-4.8.1.1-1-i686.pkg.tar.xz
xfwm4-tiling
If you use xfce and like the capability of being able to tile in 4's, by dragging the windows to the corners...default xfwm4 doesn't have this. If you want it, you can install this package. install the package using pacman by:
and run the command:
this will replace xfce's default window manager, with the tiling by 4's one.
Download:
xfwm4-tiling-4.10.0-2-i686.pkg.tar.xz
Code: Select all
pacman -U /path/to/xfwm4-tiling-4.10.0-2-i686.pkg.tar.xz
Code: Select all
xfwm4 --replace
Download:
xfwm4-tiling-4.10.0-2-i686.pkg.tar.xz
Tried lxde a bit and looks nice.
But is huge. I noticed you have samba and python in there which probably count for 30MB+. Is it intentional or they are pulled by lxde?
I also noticed that some of the directories in your SFSs have 777 permissions!
AAMOF, the entire lxde sfs has 777 permition and I _think_ your XFCE too!
Is it intentional is the arch2sfs script (or whatever you are using to build the SFSs)?
In any case is not good.
Even if you remove the SFSs some of the directories left behind are 777.(which explains why some users had messed up directories)
To see which is which try this
You definitely want to fix this ASAP.
But is huge. I noticed you have samba and python in there which probably count for 30MB+. Is it intentional or they are pulled by lxde?
I also noticed that some of the directories in your SFSs have 777 permissions!
AAMOF, the entire lxde sfs has 777 permition and I _think_ your XFCE too!
Is it intentional is the arch2sfs script (or whatever you are using to build the SFSs)?
In any case is not good.
Even if you remove the SFSs some of the directories left behind are 777.(which explains why some users had messed up directories)
To see which is which try this
Code: Select all
ls -lR /usr/ | grep drwxrwxrwx
Last edited by mavrothal on Mon 11 Feb 2013, 19:30, edited 1 time in total.
it's definitely larger than i'd like for it to be. python i believe is only there for the menu editor, in which both really can be removed. and i wanted the users to be able to browse their smb shares on their network using the built in 'Network' browser in pcmanfm. gvfs for the trash, and udisks2 for the volume monitor is also taking a 'meat plug' of space. i'm going to mess around with it some more and see if i can get it down to a more familiar size. same goes for all 3 of them. they all are a lil bigger than they could be.mavrothal wrote:Tried lxde a bit and looks nice.
But is huge. I noticed you have samba and python in there which probably count for 30MB+. Is it intentional or they are pulled by lxde?
I also noticed that some of the directories in your SFSs have 777 permissions!
yes, i've been seeing the 777 permissions thing since the beginning. i didn't know it was only me. now that u've pointed it out to me, i'm guessing my unsquashing and resquashing on an ntfs partition, is changing my directory permissions.
stifiling wrote: i'm guessing my unsquashing and resquashing on an ntfs partition,.
NTFS?...
(I told you that ntfs access is a drawback )
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==