Upup Precise 3.8.3.1 created by using up-to-date Woof
Upup Precise 3.8.3.1 created by using up-to-date Woof
Upup Precise 3.8.3.1 has been uploaded. I did use latest woof at the time.
Kernel is 3.8.3 non-PAE and it has large driver support.
The latest announcement in this link: http://www.murga-linux.com/puppy/viewto ... 156#693156
The DISTRO_SPECS ie package selection follows the ones Barry Kauler used and some enhancements for laptop usage and for pet installation.
3.8 kernel has now been used in several Puppies. 3.8.2 kernel is also in PHATslacko so...feedback in these puplets and possible fix needs should be common.
I have announced most of my builds in Derivative section. Dpup Wheezy was the exception. I am not sure if Puppy Projects is any better place...but basically this is not pure derivative. It has been created with latest woof at the time and 3.8.2 kernel has been compiled by pemasu.
Credit for this build goes to Barry Kauler and large community support through Precise Puppy development threads and other threads.
aufs3.8 has been used, and aufs3-util has been compiled in this build. Wpa_supplicant has been updated to version 1.0 and couple of other pets has been added.
Sns and Frisbee are both included, Rerwin`s latest work has been used.
Otherwise there is not large modification...like I did with Dpup Exprimo. I provide this build as non-PAE alternative for Precise Puppy.
Enjoy, test it, give feedback, find bugs and even better... suggest fixes...
Download link: http://www.smokey01.com/pemasu/UpupPrec ... ecise3831/
Kernel sources: http://www.smokey01.com/pemasu/Kernel_s ... .8.3-upup/
Kernel is 3.8.3 non-PAE and it has large driver support.
The latest announcement in this link: http://www.murga-linux.com/puppy/viewto ... 156#693156
The DISTRO_SPECS ie package selection follows the ones Barry Kauler used and some enhancements for laptop usage and for pet installation.
3.8 kernel has now been used in several Puppies. 3.8.2 kernel is also in PHATslacko so...feedback in these puplets and possible fix needs should be common.
I have announced most of my builds in Derivative section. Dpup Wheezy was the exception. I am not sure if Puppy Projects is any better place...but basically this is not pure derivative. It has been created with latest woof at the time and 3.8.2 kernel has been compiled by pemasu.
Credit for this build goes to Barry Kauler and large community support through Precise Puppy development threads and other threads.
aufs3.8 has been used, and aufs3-util has been compiled in this build. Wpa_supplicant has been updated to version 1.0 and couple of other pets has been added.
Sns and Frisbee are both included, Rerwin`s latest work has been used.
Otherwise there is not large modification...like I did with Dpup Exprimo. I provide this build as non-PAE alternative for Precise Puppy.
Enjoy, test it, give feedback, find bugs and even better... suggest fixes...
Download link: http://www.smokey01.com/pemasu/UpupPrec ... ecise3831/
Kernel sources: http://www.smokey01.com/pemasu/Kernel_s ... .8.3-upup/
Last edited by pemasu on Tue 19 Mar 2013, 21:16, edited 2 times in total.
Hi, pemasu.
The puppy sfs inside your iso is called "puppy_precise_3,8.2" (3 comma 8 dot 2). Is that a typo ? Can it be called correctly by the kernel? Is it compatible with the "3.8.2" (3 dot 8 dot 2) ending in the name of the devx ?
Not burning anything for now.
Thanks in advance.
musher0
The puppy sfs inside your iso is called "puppy_precise_3,8.2" (3 comma 8 dot 2). Is that a typo ? Can it be called correctly by the kernel? Is it compatible with the "3.8.2" (3 dot 8 dot 2) ending in the name of the devx ?
Not burning anything for now.
Thanks in advance.
musher0
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
Upup Precise 3.8.2 created by using up to date woof
I did a frugal install to the hard drive with the universal installer.
video-info-glx 1.5.1Wed13 Mar 2013 on Upup Precise 3.8.2 Linux 3.8.2-upup i686
0.0 VGA compatible controller:NVIDIACorporationG84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA
product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 310.40
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Core 0: @1603 1: @1603 2: @1603 3: @1603 MHz
I installed vlc 2.0.5 in ppm and then installed the firmware for my
pvr card in /lib/firmware but the pvr won't work, drat.
Otherwise no problems so far.
video-info-glx 1.5.1Wed13 Mar 2013 on Upup Precise 3.8.2 Linux 3.8.2-upup i686
0.0 VGA compatible controller:NVIDIACorporationG84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA
product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 310.40
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Core 0: @1603 1: @1603 2: @1603 3: @1603 MHz
I installed vlc 2.0.5 in ppm and then installed the firmware for my
pvr card in /lib/firmware but the pvr won't work, drat.
Otherwise no problems so far.
- Attachments
-
- screenshot.jpg
- (53.47 KiB) Downloaded 11741 times
Fresh frugal install on the old Athlon XP box........ everything looking good except ......basically impossible to mount a usb flash drive.No icon on the desktop, not detected by Pmount or Gparted. No problem in countless other Puppy installs.....problem present in all 3.8.X Puppy kernels.
# report-video
VIDEO REPORT: Upup Precise, version 3.8.2
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
1602 frames in 5.0 seconds = 320.361 FPS
2134 frames in 5.0 seconds = 426.726 FPS
2105 frames in 5.0 seconds = 420.902 FPS
2140 frames in 5.0 seconds = 427.746 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (196MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 12 Mar 2013 04:33:26 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
Other than the little flash drive problem it looks really solid.
Code: Select all
Mar 13 20:22:44 puppypc9250 user.info kernel: [ 159.146692] usb 1-4: new high-speed USB device number 3 using ehci-pci
Mar 13 20:22:59 puppypc9250 user.err kernel: [ 174.283395] usb 1-4: device descriptor read/64, error -110
Mar 13 20:23:15 puppypc9250 user.err kernel: [ 189.523362] usb 1-4: device descriptor read/64, error -110
Mar 13 20:23:15 puppypc9250 user.err kernel: [ 189.680335] hub 1-0:1.0: unable to enumerate USB device on port 4
Mar 13 20:23:15 puppypc9250 user.info kernel: [ 189.936701] usb 1-4: new high-speed USB device number 5 using ehci-pci
Mar 13 20:23:30 puppypc9250 user.err kernel: [ 205.020266] hub 1-0:1.0: unable to enumerate USB device on port 4
Mar 13 20:23:30 puppypc9250 user.info kernel: [ 205.276718] usb 1-4: new high-speed USB device number 6 using ehci-pci
Mar 13 20:23:46 puppypc9250 user.err kernel: [ 220.413357] usb 1-4: device descriptor read/64, error -110
Mar 13 20:24:01 puppypc9250 user.err kernel: [ 235.600257] hub 1-0:1.0: unable to enumerate USB device on port 4
Mar 13 20:24:15 puppypc9250 user.info kernel: [ 249.870017] usb 1-5: new high-speed USB device number 7 using ehci-pci
Mar 13 20:24:30 puppypc9250 user.err kernel: [ 264.953754] hub 1-0:1.0: unable to enumerate USB device on port 5
Mar 13 20:24:30 puppypc9250 user.info kernel: [ 265.210022] usb 1-5: new high-speed USB device number 8 using ehci-pci
Mar 12 16:24:36 puppypc9250 user.notice root: PROBEDISK ERROR: MOUNTED UNPLUGGED sdb1
Mar 12 16:24:40 puppypc9250 user.notice root: PROBEDISK ERROR: MOUNTED UNPLUGGED sdb1
Mar 13 20:24:46 puppypc9250 user.err kernel: [ 280.346700] usb 1-5: device descriptor read/64, error -110
Mar 13 20:25:01 puppypc9250 user.err kernel: [ 295.533624] hub 1-0:1.0: unable to enumerate USB device on port 5
Mar 13 20:25:01 puppypc9250 user.info kernel: [ 295.760020] usb 1-4: new high-speed USB device number 9 using ehci-pci
Mar 13 20:25:16 puppypc9250 user.err kernel: [ 310.896693] usb 1-4: device descriptor read/64, error -110
Mar 13 20:25:31 puppypc9250 user.err kernel: [ 326.083578] hub 1-0:1.0: unable to enumerate USB device on port 4
VIDEO REPORT: Upup Precise, version 3.8.2
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
1602 frames in 5.0 seconds = 320.361 FPS
2134 frames in 5.0 seconds = 426.726 FPS
2105 frames in 5.0 seconds = 420.902 FPS
2140 frames in 5.0 seconds = 427.746 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (196MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 12 Mar 2013 04:33:26 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
Other than the little flash drive problem it looks really solid.
NM10
Booted Asus x101ch (this has the difficult NM10 chipset), and display is working well. No problem with Flash drives. Thanks, pemasu!
(I wonder why Racy 5.5 and Precise 5.5 can't handle this graphics-display combo.)
# report-video
VIDEO REPORT: Upup Precise, version 3.8.2
Chip description:
VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 16
Modules requested to be loaded: synaptics dbe
Drivers requested to be loaded: modesetting fbdev vesa
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): modesetting
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record synaptics
Actual rendering on monitor:
Resolution: 1024x600 pixels (270x158 millimeters)
Depth: 16 planes
(I wonder why Racy 5.5 and Precise 5.5 can't handle this graphics-display combo.)
# report-video
VIDEO REPORT: Upup Precise, version 3.8.2
Chip description:
VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 16
Modules requested to be loaded: synaptics dbe
Drivers requested to be loaded: modesetting fbdev vesa
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): modesetting
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record synaptics
Actual rendering on monitor:
Resolution: 1024x600 pixels (270x158 millimeters)
Depth: 16 planes
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
Hey pemasu
I took the liberty to compile GParted with f2fs patches.
http://smokey01.com/01micko/precise/
doc and nls there too.
I didn't test yet but f2fs shows up, I can't see that there will be problems. That said, anyone can test
I took the liberty to compile GParted with f2fs patches.
http://smokey01.com/01micko/precise/
doc and nls there too.
I didn't test yet but f2fs shows up, I can't see that there will be problems. That said, anyone can test
Puppy Linux Blog - contact me for access
Raffy. I have spesifically included support for your graphics. it needs some special arrangement. Thanks goes to 01micko. He has created the patched files and script to handle intel gma graphics. I merely included his work.
Long live 01micko. Rodon also compiled modesetting_drv.so and his compile has been included. Thanks Rodon.
Edit. I was writing my post when 01mickos post arrived.
Thanks 01micko....again.
Long live 01micko. Rodon also compiled modesetting_drv.so and his compile has been included. Thanks Rodon.
Edit. I was writing my post when 01mickos post arrived.
Thanks 01micko....again.
Last edited by pemasu on Tue 12 Mar 2013, 22:18, edited 3 times in total.
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
Hello Pemasu,
Upup Precise 3.8.2 booted to desktop on my nvidia FX5200 card machine with no missing menus and graphics! Nouveau driver is loaded, glx gears giving 600 FPS
The quickpet.desktop file has a typo - menu entry has no icon.
Icon=/usr/share/icons/pupster.png should be
Icon=/usr/share/icons/qpupster.png
Edit:- Or maybe not? Too big! Perhaps should be pointing to some other icon?
Upup Precise 3.8.2 booted to desktop on my nvidia FX5200 card machine with no missing menus and graphics! Nouveau driver is loaded, glx gears giving 600 FPS
The quickpet.desktop file has a typo - menu entry has no icon.
Icon=/usr/share/icons/pupster.png should be
Icon=/usr/share/icons/qpupster.png
Edit:- Or maybe not? Too big! Perhaps should be pointing to some other icon?
Oscar in England
I am reuploading atm Upup Precise 3.8.2.
Those missing dvb and pvr drivers have been added.
Gparted has been updated to 01mickos provided one with f2fs support. Happy flash drive testing. I suppose there is already thread in murga-forum howto use f2fs formatted flash media with Puppy.
Quickpet_precise has been updated with amd catalyst modern and legacy drivers. The missing menu entry icon has been fixed.
I decided to quickly update the initial build so that so far found bugs and updates are included in the build.
I take a rest now...I will be back next evening....
Check the first post for downloads. The upload should be finished in 45 minutes or quicker.
Those missing dvb and pvr drivers have been added.
Gparted has been updated to 01mickos provided one with f2fs support. Happy flash drive testing. I suppose there is already thread in murga-forum howto use f2fs formatted flash media with Puppy.
Quickpet_precise has been updated with amd catalyst modern and legacy drivers. The missing menu entry icon has been fixed.
I decided to quickly update the initial build so that so far found bugs and updates are included in the build.
I take a rest now...I will be back next evening....
Check the first post for downloads. The upload should be finished in 45 minutes or quicker.
Upup Precise 3.8.2 created by using up to date woof
I did a frugal install to the hard drive with the universal installer.
video-info-glx1.5.2Wed 13 Mar 2013 on Upup Precise 3.8.2 Linux 3.8.2-upup i686
0.0 VGA compatible controller:NVIDIACorporationG84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA
product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 310.40
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Core 0: @1603 1: @1603 2: @1603 3: @1603 MHz
I installed vlc-2.0.5 with ppm and then put the firmware for my pvr
card in /lib/firmware and rebooted.
It works, nice job pemasu
video-info-glx1.5.2Wed 13 Mar 2013 on Upup Precise 3.8.2 Linux 3.8.2-upup i686
0.0 VGA compatible controller:NVIDIACorporationG84 [GeForce 8600 GT] (rev a1)
oem: NVIDIA
product: G84 Board - p402h00 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8600 GT/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 310.40
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Core 0: @1603 1: @1603 2: @1603 3: @1603 MHz
I installed vlc-2.0.5 with ppm and then put the firmware for my pvr
card in /lib/firmware and rebooted.
It works, nice job pemasu
- Attachments
-
- screenshot.jpg
- (42.72 KiB) Downloaded 11505 times
Hello, pemasu.
Iron refuses to load : system says it's a library because it's in /usr/lib/iron-linux, even if big executable there is given permission to execute.
Opera in /mnt/home/opera flashes on screen, but doesn't stay. Unusable.
Seamonkey ok.
Sound ok.
Symlink from /usr/share/X11/rgb.txt to /root/.rgb.txt, required by gcolor2, is missing, as in most Puppys. (I'm not counting the years I've been saying this anymore...)
BFN.
Iron refuses to load : system says it's a library because it's in /usr/lib/iron-linux, even if big executable there is given permission to execute.
Opera in /mnt/home/opera flashes on screen, but doesn't stay. Unusable.
Seamonkey ok.
Sound ok.
Symlink from /usr/share/X11/rgb.txt to /root/.rgb.txt, required by gcolor2, is missing, as in most Puppys. (I'm not counting the years I've been saying this anymore...)
BFN.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
Google-Chrome works if you install pemasu's fix after installing Chrome.musher0 wrote: Opera in /mnt/home/opera flashes on screen, but doesn't stay. Unusable.
Seamonkey ok.
- Attachments
-
- browser.jpg
- (45.47 KiB) Downloaded 1816 times
-
- google-chrome-fix-for-deb-install-0.0.1.pet
- (1.82 KiB) Downloaded 693 times
Quick post before going to work.
Billtoo. That fix has been adopted to the woof and it is already in the Upup Precise.
I tested it with http://www.chromium.org/ without installing that fix pet.
Chromium nowadays uses same filenames and location as google-chrome.
The .deb after installation met the fix automatically and it launched without any need to do root fixes.
So it works oob. Google-chrome fix is in place already.
There is cache limit 10 Mb for those browsers also.
/usr/local/petget/hacks-postinstall.sh
Billtoo. That fix has been adopted to the woof and it is already in the Upup Precise.
I tested it with http://www.chromium.org/ without installing that fix pet.
Chromium nowadays uses same filenames and location as google-chrome.
The .deb after installation met the fix automatically and it launched without any need to do root fixes.
So it works oob. Google-chrome fix is in place already.
There is cache limit 10 Mb for those browsers also.
/usr/local/petget/hacks-postinstall.sh
Code: Select all
google-chrome-*) #130221 pemasu. 130224 pemasu: limit cache size...
bla... bla...
Hi,
Long time no see.
I ported over Qupzilla 1.4.0
I've been unable to upload the .pet to the forums so I just shoved it over on a storage site.
https://mega.co.nz/#!q5hQBQZK!FleMGygwm ... v17-LPHBfk
I installed it on Upup and it works awesome.
Long time no see.
I ported over Qupzilla 1.4.0
I've been unable to upload the .pet to the forums so I just shoved it over on a storage site.
https://mega.co.nz/#!q5hQBQZK!FleMGygwm ... v17-LPHBfk
I installed it on Upup and it works awesome.
Upup Precise 3.8.2 created by using up-to-date Woof
I installed 01micko's gparted-0.14.1-i686_F2FS-precise.pet and used it
to prepare a 16gb SDHC card then installed a remaster of upup3.8.2 to
the card.
It worked fine.
@pemasu
I didn't know about the Google-Chrome fix already being in 382, sorry.
to prepare a 16gb SDHC card then installed a remaster of upup3.8.2 to
the card.
It worked fine.
@pemasu
I didn't know about the Google-Chrome fix already being in 382, sorry.
- Attachments
-
- screenshot2.jpg
- (19.13 KiB) Downloaded 1705 times
-
- screenshot1.jpg
- (28.46 KiB) Downloaded 1683 times