Precise Puppy 5.6.1-final, May 29, 2013
- broomdodger
- Posts: 279
- Joined: Sat 10 May 2008, 02:38
- Location: Santa Cruz, CA
update precisesave problems
update precisesave 5593 to 5594
I mentioned earlier that the first reboot after the initial start into 5594, both the keyboard and mouse froze.
Most everything else seemed to work.
But, then EACH subsequent [re]boot the desktop icons that I had previously removed came back. I would re-remove them and [re]boot, they came back again.
So... I abandoned the precisesave, started fresh.
All is well, actually this puppy is now my favorite.
Precise is awesome. Great to have access to Ubuntu repos.
Bill
I mentioned earlier that the first reboot after the initial start into 5594, both the keyboard and mouse froze.
Most everything else seemed to work.
But, then EACH subsequent [re]boot the desktop icons that I had previously removed came back. I would re-remove them and [re]boot, they came back again.
So... I abandoned the precisesave, started fresh.
All is well, actually this puppy is now my favorite.
Precise is awesome. Great to have access to Ubuntu repos.
Bill
I'm intrigued - how did you find out this information? My card is fairly modern (I only bought the desktop last year anyway) so why would the 319 driver not support it??scabz wrote:Peebee you need the 304.xx driver , the driver you used does not work for your vid card.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
in full install not see sda2.sda4,sda5
For sda6,sda7 .. at end all is ok
thanks
thanks
Precise Puppy version 5.5.94
Been using this for a few days and all seems fine with only one small niggle.
Browser occasionally requires 3 attempts to start, ie when selecting Forum icon or Blog icon on home page, often 3 attempts are required to reach url.
Noticed this on a few other recent puppies too (not just precise).
Show-stopper = No, minor irritation = yes.
Also occurs when using other browsers, ie Opera, Chrome, etc.
Does not seem to happen when using Precise-NOP for example, or Magoo and other similar era puppies.
Anyway - other than that ultra minor occasional inconvenience - outstanding Puppy - many thanks.
Now to try on older Acer laptop - all above relates to use on E732 laptop.
Been using this for a few days and all seems fine with only one small niggle.
Browser occasionally requires 3 attempts to start, ie when selecting Forum icon or Blog icon on home page, often 3 attempts are required to reach url.
Noticed this on a few other recent puppies too (not just precise).
Show-stopper = No, minor irritation = yes.
Also occurs when using other browsers, ie Opera, Chrome, etc.
Does not seem to happen when using Precise-NOP for example, or Magoo and other similar era puppies.
Anyway - other than that ultra minor occasional inconvenience - outstanding Puppy - many thanks.
Now to try on older Acer laptop - all above relates to use on E732 laptop.
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
-
- Posts: 10
- Joined: Mon 20 May 2013, 20:47
Quote from http://bkhome.org/blog2/?viewDetailed=00249
Do you think that maybe siliconmotion driver has same problem? Maybe that would explain black screen problem with HP Omnibook XE2 reported before (http://murga-linux.com/puppy/viewtopic. ... 655#704655). How can I test if this is the case? Executing "Xorg -configure"? Thanks in advance.Posted on 21 May 2013, 10:28 by BarryK
modesetting driver fixed
Well, well, that took me by surprise!
Earlier on, when testing the new xorgwizard-cli, it offered the 'modesetting' driver as one of the choices.
However, recently, it hasn't. Odd, the Wizard gets it's info about suitable drivers from the output of "Xorg -configure".
This morning, I found that "Xorg -configure" is totally ignoring the modesetting_drv.so driver.
A bit of testing revealed that the driver is compiled for an earlier Xorg server.
Hmmm, they are all Ubuntu DEBs. However, I am building with the "precise-updates" packages, and it seems they upgraded the server but seem to have forgotten to recompile the modesetting driver.
So I compiled it, now the Wizard offers it.
I do hope there are no other Xorg drivers in this situation.
Woof will be updated, and the driver PET uploaded soon.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Precise Puppy 5.6 has been released!
See this blog post for announcement and download links:
http://www.bkhome.org/blog2/?viewDetailed=00253
See this blog post for announcement and download links:
http://www.bkhome.org/blog2/?viewDetailed=00253
[url]https://bkhome.org/news/[/url]
Precise Puppy 5.6-final, May 21, 2013
Manual frugal install to an 8gb SDHC card, running on a Gateway
desktop pc.
video-info-glx 1.5.3 Tue 21 May 2013 on Precise Puppy 5.6 Linux 3.2.44 i686
5.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780
[Radeon HD 3200]
oem: ATI ATOMBIOS
product: RS780 01.00
X Server: Xorg Driver: fglrx
X.Org version: 1.11.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Radeon HD 3200 Graphics
OpenGL version string: 3.3.11672 Compatibility Profile Context
AMD Phenom(tm) II X4 810 Processor
Core 0: @800 1: @800 2: @800 3: @800 MHz
# glxgears
19653 frames in 5.0 seconds = 3930.484 FPS
19684 frames in 5.0 seconds = 3936.699 FPS
19707 frames in 5.0 seconds = 3941.380 FPS
#
I installed lots of applications with ppm.
I installed the proprietary ati driver.
It's looking good, no problems at all so far.
Thanks.
desktop pc.
video-info-glx 1.5.3 Tue 21 May 2013 on Precise Puppy 5.6 Linux 3.2.44 i686
5.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780
[Radeon HD 3200]
oem: ATI ATOMBIOS
product: RS780 01.00
X Server: Xorg Driver: fglrx
X.Org version: 1.11.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Radeon HD 3200 Graphics
OpenGL version string: 3.3.11672 Compatibility Profile Context
AMD Phenom(tm) II X4 810 Processor
Core 0: @800 1: @800 2: @800 3: @800 MHz
# glxgears
19653 frames in 5.0 seconds = 3930.484 FPS
19684 frames in 5.0 seconds = 3936.699 FPS
19707 frames in 5.0 seconds = 3941.380 FPS
#
I installed lots of applications with ppm.
I installed the proprietary ati driver.
It's looking good, no problems at all so far.
Thanks.
- Attachments
-
- screenshot.jpg
- (39.68 KiB) Downloaded 2493 times
wifi
is wl module for wifi included in this distro? or should there be some dancing with tambourine (pebee's pets)? otherwise one more distro for flugal or full install only (for me and some others) frisbee after networkwizard reconnected time after time with WEP in previous distros. (give way to live wifi !!!)
Re: wifi
Yes - it's therefor_wov wrote:is wl module for wifi included in this distro?
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Peebee is it Nvidia GeForce7025 if so then i have that exact same vid card and have tried 2 install new drivers. for that card 304.xx is what you need.
if you dont belive me then go to http://www.nvidia.com/Download/index.aspx?lang=en-us and check.
if you dont belive me then go to http://www.nvidia.com/Download/index.aspx?lang=en-us and check.
Installed using multi-session cd.
Installed ok to desktop and start menu.
Editing the start menu caused a crash.
Hard shut down and reboot brought me to the old version start menus.
Eventually got things going using "modsetting unaccelerated driver"
Installed wl driver but had to use frisbee to get an internet connection.
Obviously 5.6 has a problem with my system.
Processor : 4x Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz
Memory : 3993MB
Operating System : Unknown distribution
User Name : root (root)
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA Intel PCH
Had no problem installing on my (very) old PC.
irishrm.
Installed ok to desktop and start menu.
Editing the start menu caused a crash.
Hard shut down and reboot brought me to the old version start menus.
Eventually got things going using "modsetting unaccelerated driver"
Installed wl driver but had to use frisbee to get an internet connection.
Obviously 5.6 has a problem with my system.
Processor : 4x Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz
Memory : 3993MB
Operating System : Unknown distribution
User Name : root (root)
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA Intel PCH
Had no problem installing on my (very) old PC.
irishrm.
Precise Puppy 5.6-FINAL
Fresh manual frugal install to fat32 USB2 stick, Syslinux 4.04 boot and ext4 save.
All fine OOTB and I keep finding numerous upgrade treats.
The only issue so far was when I decided to switch from the Nouveau driver to the nvidia-glx-319.17-k3.2.44.sfs.
In order to persuade it to load I first had to blacklist the Nouveau module.Upon re-booting it then picked it up straight away rather than the NV driver.
I note that 319.17 gives detailed VDPAU info, which bodes well for VLC, SmPlayer and XBMC. Thanks Barryk for a great release.
All fine OOTB and I keep finding numerous upgrade treats.
The only issue so far was when I decided to switch from the Nouveau driver to the nvidia-glx-319.17-k3.2.44.sfs.
In order to persuade it to load I first had to blacklist the Nouveau module.Upon re-booting it then picked it up straight away rather than the NV driver.
I note that 319.17 gives detailed VDPAU info, which bodes well for VLC, SmPlayer and XBMC. Thanks Barryk for a great release.
- Attachments
-
- image-2.png
- (86.11 KiB) Downloaded 2458 times
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Hi BarryK,
5.6 - seems fine - thank you.
My regards
PS to all - technosaurus has produced a superfast version of "fixmenus" which also makes "refresh-menus" superfast if you have it installed,
To try it, you could download the file below and then rename it deleting the last three (.gz) characters.
Then rename your existing fixmenus file in /usr/sbin to say fixmenusold.
Then copy or move your renamed download (fixmenus) to /usr/sbin
5.6 - seems fine - thank you.
My regards
PS to all - technosaurus has produced a superfast version of "fixmenus" which also makes "refresh-menus" superfast if you have it installed,
To try it, you could download the file below and then rename it deleting the last three (.gz) characters.
Then rename your existing fixmenus file in /usr/sbin to say fixmenusold.
Then copy or move your renamed download (fixmenus) to /usr/sbin
- Attachments
-
- fixmenus.gz
- (3.37 KiB) Downloaded 566 times
Precise Puppy version 5.6
Manual frugal to ext3 partition on my 10yr old Acer laptop, booting with grub4dos from the same partition.
# uname -a
Linux puppypc22310 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 366984 309192 57792 0 21572
-/+ buffers: 287620 79364
Swap: 658660 34224 624436
#
Looking really good here - everything seems to work as expected OOTB.
Manual frugal to ext3 partition on my 10yr old Acer laptop, booting with grub4dos from the same partition.
# uname -a
Linux puppypc22310 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 366984 309192 57792 0 21572
-/+ buffers: 287620 79364
Swap: 658660 34224 624436
#
Looking really good here - everything seems to work as expected OOTB.
- Attachments
-
- Hinfo.tar.gz
- (8.63 KiB) Downloaded 383 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
Precise-5.6
Precise-5.6
Loaded in ram and used a fresh puppysavefile.
Installed several programs, tested several of the ones that come with 5.6
WiFi setup with Frisbee, no problems, now to see if it can hold? Did survive a reboot without issue.
So far, no problems, no quirks or glitches and it runs beautiful!
Must say... very nice job. First-time users and old-pros alike should appreciate this build.
5.5.94 I did have some problems with Pwidgets and a few modules dropped (weather and analog clock) and I never could make them work again even with a re-install of Pwidgets... hope it holds up better in 5.6, don't want to go to Conky unless necessary.
>>>---Indian------>
EDIT: Bummer.... after about 7-hrs of running... In fact in my desktop pic you can see the green-bar at the bottom of the desktop where wlan0 is re-connecting, that happened during taking the screenshot but I didn't notice as Frisbee reset itself (at least once), then I posted here and noticed the green-bar. Well, that was OK that it reset however about an hour later while in Gmail, wlan0 dropped again and another cold-hard-shutdown. I was able to print-out the DHCP Frisbee log, might be something there to see what's going on and get it somehow to rewerin, probably a scan-as-graphic... was not able to save anything as when WiFi drops, it totally locks up my computer for saving anything.
Loaded in ram and used a fresh puppysavefile.
Installed several programs, tested several of the ones that come with 5.6
WiFi setup with Frisbee, no problems, now to see if it can hold? Did survive a reboot without issue.
So far, no problems, no quirks or glitches and it runs beautiful!
Must say... very nice job. First-time users and old-pros alike should appreciate this build.
5.5.94 I did have some problems with Pwidgets and a few modules dropped (weather and analog clock) and I never could make them work again even with a re-install of Pwidgets... hope it holds up better in 5.6, don't want to go to Conky unless necessary.
>>>---Indian------>
EDIT: Bummer.... after about 7-hrs of running... In fact in my desktop pic you can see the green-bar at the bottom of the desktop where wlan0 is re-connecting, that happened during taking the screenshot but I didn't notice as Frisbee reset itself (at least once), then I posted here and noticed the green-bar. Well, that was OK that it reset however about an hour later while in Gmail, wlan0 dropped again and another cold-hard-shutdown. I was able to print-out the DHCP Frisbee log, might be something there to see what's going on and get it somehow to rewerin, probably a scan-as-graphic... was not able to save anything as when WiFi drops, it totally locks up my computer for saving anything.
- Attachments
-
- desktop-5.6.png
- (157.4 KiB) Downloaded 2534 times
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
wifi
managed wifi through networkwizard+frisbee (one after another on WEP wifi network) by assigning STATIC IPs. seems working fine so far. will continue testing. at last it works without rebooting or even xwin. PS: in kernel modules lib80211_crypt_tkip loaded (system=>hardinfo=>kernel modules) maybe that is the point we should look for WEP-encripted wifi.
Frugal install on the trusty Athlon XP box....... all good so far.
- Attachments
-
- Precise-5.6.jpg
- (38.98 KiB) Downloaded 1785 times