Raring Puppy - report on new BK alpha 5.6.92
Raring Puppy - report on new BK alpha 5.6.92
Raring Puppy version 5.6.92, released Jun 2013
# uname -a
Linux puppypc30952 3.9.5 #1 SMP Thu Jun 13 19:58:11 GMT-8 2013 i686 i686 i686 GNU/Linux
# free
total used free shared buffers
Mem: 1804736 619404 1185332 0 71420
-/+ buffers: 547984 1256752
Swap: 0 0 0
# ^C
Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard. E732 laptop using an old external LCD monitor.
Only issue, it went to prompt at startup, so typed “xwin
# uname -a
Linux puppypc30952 3.9.5 #1 SMP Thu Jun 13 19:58:11 GMT-8 2013 i686 i686 i686 GNU/Linux
# free
total used free shared buffers
Mem: 1804736 619404 1185332 0 71420
-/+ buffers: 547984 1256752
Swap: 0 0 0
# ^C
Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard. E732 laptop using an old external LCD monitor.
Only issue, it went to prompt at startup, so typed “xwin
- Attachments
-
- Hinfo.tar.gz
- (8.37 KiB) Downloaded 490 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
I have copied this over into this new thread which is more suitable.
For those testing Raring Puppy 5.6.92 (5.7-alpha1)
Confirmed that PPM from the menu causes drop out to prompt. This also happens with QuickSetup first-run settings from the menu. I think this is what is causing the momentary desktop dropping to prompt at first boot because the first-run dialog thingy is trying to run.
I think this is happening because the newer JWM needs some newer config files. I installed 01micko's jwmconfig from here:-
http://www.murga-linux.com/puppy/viewto ... &start=131
and PPM and QuickSetup first-run settings start OK from the menu now.
ffmpeg / avconv has 3 missing dependency libs, libtbb2, libopencv-core and libopencv-imgproc
These can easily be installed via PPM.
NOTE:- BarryK has now posted a fix for the JWM / jwmconfig issue in his blog:-
http://bkhome.org/blog2/?viewDetailed=00294
For those testing Raring Puppy 5.6.92 (5.7-alpha1)
Confirmed that PPM from the menu causes drop out to prompt. This also happens with QuickSetup first-run settings from the menu. I think this is what is causing the momentary desktop dropping to prompt at first boot because the first-run dialog thingy is trying to run.
I think this is happening because the newer JWM needs some newer config files. I installed 01micko's jwmconfig from here:-
http://www.murga-linux.com/puppy/viewto ... &start=131
and PPM and QuickSetup first-run settings start OK from the menu now.
ffmpeg / avconv has 3 missing dependency libs, libtbb2, libopencv-core and libopencv-imgproc
These can easily be installed via PPM.
NOTE:- BarryK has now posted a fix for the JWM / jwmconfig issue in his blog:-
http://bkhome.org/blog2/?viewDetailed=00294
Oscar in England
Frustrated Again
THe Alpha gave me hope that it would work with my system....at first boot it recognized my network and sound chip.
After the first reboot, with the detected settings in the save file(USB Bootable), the network and sound were still detected.
Flushed with success. I installed a terminal program and pidgin from the PPM and rebooted.
Amazing...the network settings were lost...I had to set it up again....and now no sound, no sound device detected.
I'm not posting any of the particulars, since reports of simiilar problems with the latest version(s) of Precise have gone unanswered in any thread in the forum. Asking for help in diagnosing the problem with the sound card have also gone unanswered.
Thom
After the first reboot, with the detected settings in the save file(USB Bootable), the network and sound were still detected.
Flushed with success. I installed a terminal program and pidgin from the PPM and rebooted.
Amazing...the network settings were lost...I had to set it up again....and now no sound, no sound device detected.
I'm not posting any of the particulars, since reports of simiilar problems with the latest version(s) of Precise have gone unanswered in any thread in the forum. Asking for help in diagnosing the problem with the sound card have also gone unanswered.
Thom
Raring Puppy - report on new BK alpha 5.6.92
Manual frugal install to a 16gb SDHC card, running on an Acer desktop
pc.
Computer
Processor 2x Athlon(tm) Dual Core Processor 4850e
Memory 2853MB (138MB used)
Machine Type Physical machine
Operating System Raring Puppy - 5.6.92
User Name root (root)
Date/Time Mon 17 Jun 2013 02:35:49 PM EDT
Display
Resolution 1280x1024 pixels
OpenGL Renderer GeForce 9200/integrated/SSE2/3DNOW!
X11 Vendor The X.Org Foundation
Audio Devices
Audio Adapter HDA-Intel - HDA NVidia
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce 9200/integrated/SSE2/3DNOW!
Version 3.3.0 NVIDIA 319.17
Direct Rendering Yes
Network controller Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
I installed an openbox+ pet from the forum to avoid the jwm problems.
Installed propietary Nvidia driver too.
I backed up my savefile and then installed vlc with ppm, next reboot
the network connection and sound were broken so I restored my backup
savefile.
Removing an application and all the dependencies that go with it is impossible
so when you add an application from ppm it could break things and you
don't find out until the damage is done.
Looking forward to the next release.
pc.
Computer
Processor 2x Athlon(tm) Dual Core Processor 4850e
Memory 2853MB (138MB used)
Machine Type Physical machine
Operating System Raring Puppy - 5.6.92
User Name root (root)
Date/Time Mon 17 Jun 2013 02:35:49 PM EDT
Display
Resolution 1280x1024 pixels
OpenGL Renderer GeForce 9200/integrated/SSE2/3DNOW!
X11 Vendor The X.Org Foundation
Audio Devices
Audio Adapter HDA-Intel - HDA NVidia
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce 9200/integrated/SSE2/3DNOW!
Version 3.3.0 NVIDIA 319.17
Direct Rendering Yes
Network controller Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
I installed an openbox+ pet from the forum to avoid the jwm problems.
Installed propietary Nvidia driver too.
I backed up my savefile and then installed vlc with ppm, next reboot
the network connection and sound were broken so I restored my backup
savefile.
Removing an application and all the dependencies that go with it is impossible
so when you add an application from ppm it could break things and you
don't find out until the damage is done.
Looking forward to the next release.
- Attachments
-
- screenshot.jpg
- (64.35 KiB) Downloaded 1351 times
Faster download of Raring 5.6.92
Faster download of Raring 5.6.92
http://ftp.nluug.nl/os/Linux/distr/quir ... 5.7alpha2/
_____________________________________________
http://ftp.nluug.nl/os/Linux/distr/quir ... 5.7alpha2/
_____________________________________________
Last edited by don570 on Sat 29 Jun 2013, 16:29, edited 1 time in total.
The boot issue has been solved.
I followed Barry's tip in the link above, provided by OscarTalk and used sfsedit to modify jwmrc. The result is perfect boot. Haven't done much testing yet, however at first glance this build is very responsive and fast. Very fast. My little eeepc loves this new kernel. Although, it hasn't met a new kernel it didn't like, but this one looks really good.
I followed Barry's tip in the link above, provided by OscarTalk and used sfsedit to modify jwmrc. The result is perfect boot. Haven't done much testing yet, however at first glance this build is very responsive and fast. Very fast. My little eeepc loves this new kernel. Although, it hasn't met a new kernel it didn't like, but this one looks really good.
Puppy 5.6.92
I am unable to create save file in my frugal installation. The machine is not creating any save file and also showing that "session not saved" after opting save option while rebooting or shutdown of my PC . How to solve this problem? May be corrected next beta version.
Puppy 5.6.92
I am unable to create save file in my frugal installation. The machine is not creating any save file and also showing that "session not saved" after opting save option while rebooting or shutdown of my PC . How to solve this problem? May be corrected next beta version.
backi wrote:Hi !
Could boot to desktop (after typing xwin to prompt )
but when trying to connect to internet...... desktop crashed ---went to prompt.
Could not recover desktop again ........ my experience
Here's how to solve the boot issue and I'm attaching the editsfs pet (have a look at my post above): http://bkhome.org/blog2/?viewDetailed=00294
Barry wrote:Posted on 17 Jun 2013, 18:26 by BarryK
Cause of JWM crash
I think that I know the cause. I think it is those layers, which have caused me problems before.
In /root/.jwmrc, comment out the "layer" line:... there's another line with "layer", comment that out for good measure. gtkdialog-splash is for putting up messages, like "Please wait...". Anything that calls this, is causing JWM to crash. To fix it properly, you also have to edit /etc/xdg/tamplates/_root_.jwmrcCode: Select all
<Group> <Class>gtkdialog-splash</Class> <Option>nolist</Option> <!-- <Option>layer:above</Option> --> <Option>nofocus</Option> </Group>
- Attachments
-
- EditSFS-2.1.5.pet
- (3.56 KiB) Downloaded 495 times
You did better than me, Bill. Can't get any picture by any method, any driver [XP@3000/1Mb/Radeon7000-64]. This is particularly annoying because the 'Test now' always gives 'OK' whether I use 'unaccelerated', 'Radeon' or 'let it choose'. Sometimes can get back to a prompt but it doesn't help; sometimes just a flashing cursor.
Seem to remember issues with Rarin' previously. One step forward, two steps back is the strategy at Canonical?!
Later: stuck an nV MX440/128n card in. Interesting; picture came up at correct resolution then straightaway returned me to a prompt. Selected nouveau driver and came up with the wrong resolution! Unable to select another. Got the same PPM=prompt feature as Bill, supra.
This one has a very long way to go. Get the feeling that BK's skills would be best deployed on honing Precise, Wary and Racy - possibly ARMs ?
Update: Hi, Bill, thanks for your PM.
Seem to remember issues with Rarin' previously. One step forward, two steps back is the strategy at Canonical?!
Later: stuck an nV MX440/128n card in. Interesting; picture came up at correct resolution then straightaway returned me to a prompt. Selected nouveau driver and came up with the wrong resolution! Unable to select another. Got the same PPM=prompt feature as Bill, supra.
This one has a very long way to go. Get the feeling that BK's skills would be best deployed on honing Precise, Wary and Racy - possibly ARMs ?
Update: Hi, Bill, thanks for your PM.
- dennis-slacko531
- Posts: 100
- Joined: Wed 18 Jan 2012, 21:53
- Location: Oregon
- Contact:
pMusic 3.3.0 --- can't make it play
Not getting any sound from pMusic. However, GNOME MPlayer sounds very rich. Other minor issues occurred with this manual frugal install pertaining to the Intel graphics driver (like it rebooted twice when the screen "blanker" occurred). Don't know why, but it resolved itself later.
Raring Puppy - report on new BK alpha 5.6.92
Here's a text file of radio stations that I'm using in PupRadio,
mostly oldies but other stuff too.
If you want it just delete the .gz and load into geany or any text
editor then copy/paste into PupRadio.
mostly oldies but other stuff too.
If you want it just delete the .gz and load into geany or any text
editor then copy/paste into PupRadio.
- Attachments
-
- radio.txt.gz
- (692 Bytes) Downloaded 444 times
-
- PupRadioscrn.jpg
- (67.52 KiB) Downloaded 913 times
Python Installation Issue
Tried to get Calibre ebook manager working but a problem with Python installation. Will wait until more mature. This is the only problemen countered although mouse clicks have to be very precise to open program.
- dennis-slacko531
- Posts: 100
- Joined: Wed 18 Jan 2012, 21:53
- Location: Oregon
- Contact:
It's on my Godaddy server (raring iso & md5)
I like this Raring Puppy alpha --and put it on my server...
http://www.beOk.com/lnux
http://www.beOk.com/lnux
first draft of quickpet_raring http://www.murga-linux.com/puppy/viewto ... 634#709634
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Essentials all ok as usual. 5692 boots (frugal installs) a bit faster
than most other pups but not as fast as Wary 5.5 on my test PC
(having a 2 ghz Pentium 4 cpu and 768 meg RAM). It doesn't
"feel" any faster than other pups though.
I also experienced having to type xwin on the initial boot ... and I
also installed Micko's jwm pet mentioned on page 1.
Kernel 3.9.5 still has the wireless power management bug.
For those interested in updating (upgrading) mplayer from 1.0.3
to 1.0.8 you can d/l the following from the ppm (thanks to pemasu
for the info):
gnome-mplayer_1.0.8-1
libgmlib1_1.0.8-1
libgmtk1_1.0.8-1
libgmtk1-data_1.0.8-1
libimobiledevice3_1.1.4
libgpod4_0.8.2
libmusicbrainz3-6_3.0.2-2.1
libgda-5.0-4_5.0.3
libpulse-mainloop-glib0_3.0
libplist1_1.8-2
libneon27-gnutls_0.29.6-3
libdiscid0_0.2.2
libusbmuxd2_1.0.8
Art
than most other pups but not as fast as Wary 5.5 on my test PC
(having a 2 ghz Pentium 4 cpu and 768 meg RAM). It doesn't
"feel" any faster than other pups though.
I also experienced having to type xwin on the initial boot ... and I
also installed Micko's jwm pet mentioned on page 1.
Kernel 3.9.5 still has the wireless power management bug.
For those interested in updating (upgrading) mplayer from 1.0.3
to 1.0.8 you can d/l the following from the ppm (thanks to pemasu
for the info):
gnome-mplayer_1.0.8-1
libgmlib1_1.0.8-1
libgmtk1_1.0.8-1
libgmtk1-data_1.0.8-1
libimobiledevice3_1.1.4
libgpod4_0.8.2
libmusicbrainz3-6_3.0.2-2.1
libgda-5.0-4_5.0.3
libpulse-mainloop-glib0_3.0
libplist1_1.8-2
libneon27-gnutls_0.29.6-3
libdiscid0_0.2.2
libusbmuxd2_1.0.8
Art
The only problem I've had not already mentioned here is that it drops out of x when I click on the free space button, and same if I run "Partview" from the desktop.
Funnily, the first time I booted into it I could create a save-file, but on un-saved boots after that it wouldn't save. I did a full hd install instead and it's working fine. It even runs dropbox without giving me the setup wizard every time (grrr).
Funnily, the first time I booted into it I could create a save-file, but on un-saved boots after that it wouldn't save. I did a full hd install instead and it's working fine. It even runs dropbox without giving me the setup wizard every time (grrr).
Puppy user since 0.x.x