Upup Raring 3.9.9.2 with non-PAE 3.9.9 kernel. 13 July 2013
Used delta to make new iso..... upgraded from 3.9.9 to 3.9.9.1. All good so far.
# report-video
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri exa extmod fb fbdevhw glx kbd mouse shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
134 frames in 5.0 seconds = 26.733 FPS
145 frames in 5.0 seconds = 28.975 FPS
150 frames in 5.0 seconds = 29.903 FPS
149 frames in 5.0 seconds = 29.788 FPS
# report-video
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri exa extmod fb fbdevhw glx kbd mouse shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
134 frames in 5.0 seconds = 26.733 FPS
145 frames in 5.0 seconds = 28.975 FPS
150 frames in 5.0 seconds = 29.903 FPS
149 frames in 5.0 seconds = 29.788 FPS
- Attachments
-
- Raring 3.9.9.1.jpg
- (46.77 KiB) Downloaded 1397 times
Manual frugal install on an old P4 test box.Looking good.
# report-video
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri2 extmod fb fbdevhw glx kbd mouse
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
377 frames in 5.0 seconds = 75.267 FPS
375 frames in 5.0 seconds = 74.941 FPS
375 frames in 5.0 seconds = 74.943 FPS
371 frames in 5.0 seconds = 74.143 FPS
371 frames in 5.0 seconds = 74.131 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (222MB used)
Machine Type : Physical machine
Operating System : Upup Raring - 3.9.9.1
User Name : root (root)
Date/Time : Sun 21 Jul 2013 01:31:30 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
# report-video
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri2 extmod fb fbdevhw glx kbd mouse
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
377 frames in 5.0 seconds = 75.267 FPS
375 frames in 5.0 seconds = 74.941 FPS
375 frames in 5.0 seconds = 74.943 FPS
371 frames in 5.0 seconds = 74.143 FPS
371 frames in 5.0 seconds = 74.131 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (222MB used)
Machine Type : Physical machine
Operating System : Upup Raring - 3.9.9.1
User Name : root (root)
Date/Time : Sun 21 Jul 2013 01:31:30 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
Code: Select all
# free
total used free shared buffers
Mem: 2592384 701252 1891132 0 84916
-/+ buffers: 616336 1976048
Swap: 4198396 0 4198396
#
Upup Raring 3.9.9.1
Hi pemasu,
It's working great although I still have the mounting problem for an ntfs partition. Your new sfs for VirtualBox appears to work fine. Although, there is a newer version available from Oracle. I did add their Extension Pack which is required to activate some USB features and it installed fine.
Thank you for another super distribution.
Jim
It's working great although I still have the mounting problem for an ntfs partition. Your new sfs for VirtualBox appears to work fine. Although, there is a newer version available from Oracle. I did add their Extension Pack which is required to activate some USB features and it installed fine.
Thank you for another super distribution.
Jim
- Attachments
-
- image-4.jpg
- (28.71 KiB) Downloaded 1275 times
-
- image-3.jpg
- (42.12 KiB) Downloaded 1277 times
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
thanks having "fished" this |>--3.9.9.1- (°> new «fish» from island...
with:
- loading intel 2.21.6 debian package (i personaly picked up it from the former 3.9.9 and made a pet)
or
- upon boot-up,
1. right click somewhere in the black screen area to let the main popup menu be displayed (only icons, no text);
2. then point on the bottommost icon (i.e = Shutdown) to let the side menu and have the side popup menu displayed having red X icon standing for "X restart" in it;
3. click on this red X ...and it is done. The X desktop comes fully dipslayed.
4.Then select Menu/Setup/QuickSetup first-run settings to achieve locale settings as usual.
Cheers, Charlie
thanks having "fished" this |>--3.9.9.1- (°> new «fish» from island...
in this 3.9.9.1 rox "Rename" function still writes qwerty while keyboard settings are be-latin1 (i.e. belgian azerty)pemasu wrote:Charlie6. If I understand correctly you should have azerty in Rox. Instead you have qwerty...
this can be solved eitherpemasu wrote:About xorg intel_drv.so driver problem with brookdale graphics...
with:
- loading intel 2.21.6 debian package (i personaly picked up it from the former 3.9.9 and made a pet)
or
- upon boot-up,
1. right click somewhere in the black screen area to let the main popup menu be displayed (only icons, no text);
2. then point on the bottommost icon (i.e = Shutdown) to let the side menu and have the side popup menu displayed having red X icon standing for "X restart" in it;
3. click on this red X ...and it is done. The X desktop comes fully dipslayed.
4.Then select Menu/Setup/QuickSetup first-run settings to achieve locale settings as usual.
Cheers, Charlie
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu !
abiword and gnumeric display azerty when i type azerty;
as also rox rename .... ..!!??
but geany display qwerty instead .
I then run keymap-set in console + select be_latin1; then closed and reopened geany: OK ! it displays azerty now
This post typed from that very session ...
Thanks!
Charlie
I went to fresh-1st-boot raring-3.9.9.1, and run quicksetup first settings:pemasu wrote:Charlie6. If you run in console: keymap-set
....and choose your keyboard setting with it. Does it fix the Rox-filer right click problem ?
abiword and gnumeric display azerty when i type azerty;
as also rox rename .... ..!!??
but geany display qwerty instead .
I then run keymap-set in console + select be_latin1; then closed and reopened geany: OK ! it displays azerty now
This post typed from that very session ...
Thanks!
Charlie
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi Pemasu,
I use to adjust quicksetup
- fr_BE for locale
- GMT Europe Brusels
- be_latin1 keyboard map
whenever booting-up pfix=ram
Yesterday when running keymap-set in console, be_latin1 was in first topmost position in the keymap-sets keyboard maps list.
This morning, i booted-up using a live-cd having the former 3.9.9 version, and again i got rox displaying qwerty when typing azerty.
I also booted-up on 3.9.9.1 with:
- 1st: adjusting the quicksetup kbd map to azeryy (Tandon); again rox display qwerty ....
- 2nd: run keymap-set and adjust to be_latin1; again got rox diplaying qwerty.
Typing in abiword, gnumeric, geany works OK as expected. Rox only has that behaviour.
Yes i have !pemasu wrote:... I suppose you have used quicksetup for your keyboard
map selection.
I use to adjust quicksetup
- fr_BE for locale
- GMT Europe Brusels
- be_latin1 keyboard map
whenever booting-up pfix=ram
Yesterday when running keymap-set in console, be_latin1 was in first topmost position in the keymap-sets keyboard maps list.
This morning, i booted-up using a live-cd having the former 3.9.9 version, and again i got rox displaying qwerty when typing azerty.
I also booted-up on 3.9.9.1 with:
- 1st: adjusting the quicksetup kbd map to azeryy (Tandon); again rox display qwerty ....
- 2nd: run keymap-set and adjust to be_latin1; again got rox diplaying qwerty.
Typing in abiword, gnumeric, geany works OK as expected. Rox only has that behaviour.
Hi pemasu,pemasu wrote:I knew that there are some which would like to use default sna accelerated intel_drv.so. For them fix is easy and quite small. Just download from PPM: xserver-xorg-video-intel_2.21.6 .deb. Install it and restart X. Done.
In its default UXA mode, this build doesn't have any of the above desktop distortions. I want to set it straight. Those happened only when I attempted to have SNA as accel method. And it runs pretty fast. Fast to the extent, that I'm re-thinking my position on SNA vs UXA for my eeepc. I want to compile video-intel driver myself and do 2 versions of it - SNA only + UXA only. That would be the best way to chose the right one for this machine, I think. And looking at charlie6's effort on compiling mesa - I want to do that too. Any advice, hints, cflags from both of you, or anyone who cares to share, will be greatly appreciated.
Thank you in advance.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
gnumeric-1.12 displays cells «shadow» when using freeze panes (see shot attached).
This does not happen if not using freeze panes.
gnumeric-1.12 displays cells «shadow» when using freeze panes (see shot attached).
This does not happen if not using freeze panes.
- Attachments
-
- cells shadows gnum 1.12.1.png
- (76.67 KiB) Downloaded 777 times
Request for update to Bibletime 2.9.2
Hi pemasu,
I reported previously that no text is visible in Bibletime on Raring compatible pups due to recent Ubuntu Raring updates. It has been confirmed as a Raring bug, however the recent update of Bibletime 2.9.2 has fixed this bug. We just need to package Bibletime 2.9.2 for puppy if possible.
Thanks,
Jim
I reported previously that no text is visible in Bibletime on Raring compatible pups due to recent Ubuntu Raring updates. It has been confirmed as a Raring bug, however the recent update of Bibletime 2.9.2 has fixed this bug. We just need to package Bibletime 2.9.2 for puppy if possible.
Thanks,
Jim
Speaking of Bible-study apps ...
Has anyone visited bible.org lately?
They updated and it's lot easier to use.
Type a search word or phrase into the first window and it brings up all of their related resources for study.
Nothing required but a browser and Internet access.
I posted a daily OT chronological study, broken into 7-day groups, as well as chronological Gospels and the rest of the NT in canonical order and now all I have to do is enter my name to find it.
From inside the study each heading has the texts to be covered - a mouse-over pops up the Bible text.
In the Bible text pop-up is "Read More" - clicking that brings up a split screen - full Bible text on the left - with links to translator's notes on the right, as well as a Greek/Hebrew dictionary, commentary, etc.
A pretty amazing resource! For those who are interested.
Has anyone visited bible.org lately?
They updated and it's lot easier to use.
Type a search word or phrase into the first window and it brings up all of their related resources for study.
Nothing required but a browser and Internet access.
I posted a daily OT chronological study, broken into 7-day groups, as well as chronological Gospels and the rest of the NT in canonical order and now all I have to do is enter my name to find it.
From inside the study each heading has the texts to be covered - a mouse-over pops up the Bible text.
In the Bible text pop-up is "Read More" - clicking that brings up a split screen - full Bible text on the left - with links to translator's notes on the right, as well as a Greek/Hebrew dictionary, commentary, etc.
A pretty amazing resource! For those who are interested.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Upup Raring 3.9.9.1 with non-PAE 3.9.9 kernel.
I used the universal installer to do a frugal install to the hard
drive of a Gateway desktop pc.
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430]
(rev a1)
Requested by /etc/X11/xorg.conf:
Modules requested to be loaded: dbe
Drivers requested to be loaded: vesa nvidia nvidia
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nvidia
Loaded modules: dbe dri2 extmod fb glx kbd mouse ramdac shadow wfb
Actual rendering on monitor:
Resolution: 3360x1080 pixels (959x315 millimeters)
Depth: 24 planes
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
306 frames in 5.0 seconds = 61.173 FPS
304 frames in 5.0 seconds = 60.734 FPS
304 frames in 5.0 seconds = 60.734 FPS
There is a bug in the universal installer in that while it installs to
the raring3.9.9.1frugal directory when you reboot for the first time
to create your savefile it will save to / unless you notice and change
to the proper directory.
I added applications with ppm,openbox_plus-1.5.3.pet and a few others
that's it so far.
drive of a Gateway desktop pc.
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430]
(rev a1)
Requested by /etc/X11/xorg.conf:
Modules requested to be loaded: dbe
Drivers requested to be loaded: vesa nvidia nvidia
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nvidia
Loaded modules: dbe dri2 extmod fb glx kbd mouse ramdac shadow wfb
Actual rendering on monitor:
Resolution: 3360x1080 pixels (959x315 millimeters)
Depth: 24 planes
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
306 frames in 5.0 seconds = 61.173 FPS
304 frames in 5.0 seconds = 60.734 FPS
304 frames in 5.0 seconds = 60.734 FPS
There is a bug in the universal installer in that while it installs to
the raring3.9.9.1frugal directory when you reboot for the first time
to create your savefile it will save to / unless you notice and change
to the proper directory.
I added applications with ppm,openbox_plus-1.5.3.pet and a few others
that's it so far.
- Attachments
-
- screenshot.jpg
- (37.2 KiB) Downloaded 1002 times
Re: Upup Raring 3.9.9.1 with non-PAE 3.9.9 kernel.
openbox_plus-1.5.3.petBilltoo wrote:I used the universal installer to do a frugal install to the hard
drive of a Gateway desktop pc.
VIDEO REPORT: Upup Raring, version 3.9.9.1
Chip description:
VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430]
(rev a1)
Requested by /etc/X11/xorg.conf:
Modules requested to be loaded: dbe
Drivers requested to be loaded: vesa nvidia nvidia
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nvidia
Loaded modules: dbe dri2 extmod fb glx kbd mouse ramdac shadow wfb
Actual rendering on monitor:
Resolution: 3360x1080 pixels (959x315 millimeters)
Depth: 24 planes
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
306 frames in 5.0 seconds = 61.173 FPS
304 frames in 5.0 seconds = 60.734 FPS
304 frames in 5.0 seconds = 60.734 FPS
There is a bug in the universal installer in that while it installs to
the raring3.9.9.1frugal directory when you reboot for the first time
to create your savefile it will save to / unless you notice and change
to the proper directory.
I added applications with ppm,openbox_plus-1.5.3.pet and a few others
that's it so far.
In that download? You figure game in the download?
Re: Upup Raring 3.9.9.1 with non-PAE 3.9.9 kernel.
There's no game in the openbox plus pet.linux28 wrote: openbox_plus-1.5.3.pet
In that download? You figure game in the download?
Upup Raring version 3.9.9.1, released Jul 2013
Truly outstanding - a really luvly puppy in every respect - and fast, even on my 10yr old Acer laptop.
# uname -a
Linux puppypc26562 3.9.9-upup #1 SMP Fri Jul 12 21:50:30 EEST 2013 i686 i686 i686 GNU/Linux
# uptime
14:34:52 up 3:19, load average: 0.61, 0.59, 0.35
# free
total used free shared buffers
Mem: 366352 336676 29676 0 14020
-/+ buffers: 322656 43696
Swap: 658660 98592 560068
# top
Mem: 336360K used, 29992K free, 0K shrd, 14020K buff, 186448K cached
CPU: 18% usr 6% sys 0% nic 75% idle 0% io 0% irq 0% sirq
Load average: 0.47 0.56 0.35 1/103 22102
Using SeaMonkey to post this and all seems fine.
Running a manual frugal to an ext3 partition and booting with grub4dos.
Considering the age of the laptop and relatively meager resources, this is running extremely well. Thank you pemasu - much appreciated.
Truly outstanding - a really luvly puppy in every respect - and fast, even on my 10yr old Acer laptop.
# uname -a
Linux puppypc26562 3.9.9-upup #1 SMP Fri Jul 12 21:50:30 EEST 2013 i686 i686 i686 GNU/Linux
# uptime
14:34:52 up 3:19, load average: 0.61, 0.59, 0.35
# free
total used free shared buffers
Mem: 366352 336676 29676 0 14020
-/+ buffers: 322656 43696
Swap: 658660 98592 560068
# top
Mem: 336360K used, 29992K free, 0K shrd, 14020K buff, 186448K cached
CPU: 18% usr 6% sys 0% nic 75% idle 0% io 0% irq 0% sirq
Load average: 0.47 0.56 0.35 1/103 22102
Using SeaMonkey to post this and all seems fine.
Running a manual frugal to an ext3 partition and booting with grub4dos.
Considering the age of the laptop and relatively meager resources, this is running extremely well. Thank you pemasu - much appreciated.
- Attachments
-
- Hinfo.tar.gz
- (8.6 KiB) Downloaded 373 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
Just tried this on a Dell with a Broadcom BCM4312 & it refuses to recognize the wifi.
Anyone found a fix for this, please?
It's real late here so if it's available via a search I'll find it tomorrow ...
Anyone found a fix for this, please?
It's real late here so if it's available via a search I'll find it tomorrow ...
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
It didn't create a tarball but rather a folder with a bunch of files ...pemasu wrote:Edoc. You have to offer diagnostic data for trouble shooting. My crystal ball is dim today.
In console: pdiag
Attach the created tarball here to the thread.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Edoc. Not true.
in console: pdiag......and result was:
/root/pdiag-20130726.tar.gz
http://i.imgur.com/vLiV0rp.jpg
in console: pdiag......and result was:
/root/pdiag-20130726.tar.gz
http://i.imgur.com/vLiV0rp.jpg