LxPup-by-SFS (LXDE)
Better menu management for LxPup by SFS
28-jul-2013
All pets have been updated (see the individual posts) to have better menu management in that all menu items in the base pup are now found and included in the LxPup by SFS menus.
New lxpupsetup pet versions are:
1.4-s for Slacko and Upup-Precise
1.4-u for Precise Puppy **
1.5-r for Upup-Raring
** Precise Puppy 5.7 is supported by the B.5.5.3 version sfs plus the 1.4-u version pet
Cheers
peebee
All pets have been updated (see the individual posts) to have better menu management in that all menu items in the base pup are now found and included in the LxPup by SFS menus.
New lxpupsetup pet versions are:
1.4-s for Slacko and Upup-Precise
1.4-u for Precise Puppy **
1.5-r for Upup-Raring
** Precise Puppy 5.7 is supported by the B.5.5.3 version sfs plus the 1.4-u version pet
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Precise 5.7.1
Hi Peter, I installed Precise Puppy 5.7.1 this afternoon and before creating a save file for the first time, loaded your SFS and installed the PET. All works fine, first time, so thank you again. One question, however; in the menu structure accessed from the 'start' button, most entries have submenus with the same name; e.g. the Desktop menu has a 'Desktop' submenu, and the entries are split between the higher level Desktop menu and the Desktop submenu. Same for System, Utility, Personal, Network, and Internet, but not others. I would willingly edit the menu structure myself if I could see how. Can you give me any hints, please?
Re: Precise 5.7.1
Hi Simessimes wrote:Hi Peter, Can you give me any hints, please?
I'll admit the menu structure is a bit odd but in my defence I thought it would be better to have all the underlying Pup menu items in the LxPup menu rather than have some missing which was the case previously.
You can find the menu definitions at /etc/xdg/menus/lxde-applications.menu
I created this automagically from the Pup menus with this script:
Code: Select all
#!/bin/sh
#lxpup by sfs menu creator 27-07-13
cd /etc/xdg/menus
rm lxpup.menu
cat puppy-desktop.menu puppy-system.menu puppy-setup.menu puppy-utility.menu puppy-filesystem.menu puppy-graphic.menu puppy-document.menu puppy-business.menu puppy-personal.menu puppy-network.menu puppy-internet.menu puppy-multimedia.menu puppy-fun.menu > tmp1
sed -e '/?xml/ d' -e '/!DOCTYPE/ d' -e '/DefaultAppDirs/ d' -e '/DefaultDirectoryDirs/ d' -e 's/>Business</>Calculate</' -e 's/>Puppy-Desktop.directory</>Mate-Puppy-Desktop.directory</' -e 's/>Puppy-System.directory</>Mate-Puppy-System.directory</' -e 's/>Puppy-Setup.directory</>Mate-Puppy-Setup.directory</' -e 's/>Puppy-Utility.directory</>Mate-Puppy-Utility.directory</' -e 's/>Puppy-Filesystem.directory</>Mate-Puppy-Filesystem.directory</' -e 's/>Puppy-Graphic.directory</>Mate-Puppy-Graphic.directory</' -e 's/>Puppy-Document.directory</>Mate-Puppy-Document.directory</' -e 's/>Puppy-Business.directory</>Mate-Puppy-Business.directory</' -e 's/>Puppy-Personal.directory</>Mate-Puppy-Personal.directory</' -e 's/>Puppy-Network.directory</>Mate-Puppy-Network.directory</' -e 's/>Puppy-Internet.directory</>Mate-Puppy-Internet.directory</' -e 's/>Puppy-Multimedia.directory</>Mate-Puppy-Multimedia.directory</' -e 's/>Puppy-Fun.directory</>Mate-Puppy-Fun.directory</' tmp1 > tmp2
rm tmp1
head -n 32 lxde-applications.menu > tmp1
tail -n 8 lxde-applications.menu > tmp3
cat tmp1 tmp2 tmp3 > lxpup-applications.menu
rm tmp1 tmp2 tmp3
exit
Let me know if you discover a better menu definition.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Compiz add-on
LxPup-by-SFS does not add any extra bling to what is available in the underlying Puppy other than the Elementary icon set.
01micko asked me to have a go at putting Compiz on top of LxPup-by-SFS for Slacko - the result can be found at:
http://murga-linux.com/puppy/viewtopic. ... 580#721580
Cheers
peebee
NOTE: only for Slacko
01micko asked me to have a go at putting Compiz on top of LxPup-by-SFS for Slacko - the result can be found at:
http://murga-linux.com/puppy/viewtopic. ... 580#721580
Cheers
peebee
NOTE: only for Slacko
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
New versions 28 Aug 2013
New versions of LxPup by SFS are now available in the next 3 posts.
Main changes are:
pcmanfm is now version 1.1.2
pup-volume-monitor is now version 0.1.15
Openbox Configuration Manager is now included
Lxlauncher is now included - this is intended for netbooks with small screens - to try it type lx into the run menu and then select and run lxlauncher - if you want it to be permanent then you will need to add a script to Startup. See screenie.
The Desktop menu has been "tidied" to remove any non-LXDE items
Various small other tidies including a new numbering scheme for the sfs/pets
Main changes are:
pcmanfm is now version 1.1.2
pup-volume-monitor is now version 0.1.15
Openbox Configuration Manager is now included
Lxlauncher is now included - this is intended for netbooks with small screens - to try it type lx into the run menu and then select and run lxlauncher - if you want it to be permanent then you will need to add a script to Startup. See screenie.
The Desktop menu has been "tidied" to remove any non-LXDE items
Various small other tidies including a new numbering scheme for the sfs/pets
- Attachments
-
- Screenshot_2.png
- LxLauncher screen shot
- (61.08 KiB) Downloaded 2056 times
Last edited by peebee on Tue 03 Sep 2013, 20:12, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Slacko + Upup-Precise version
NEW VERSION 8-sep-13
Install as described in post #1
For Slacko 5.6 and Upup-Precise 3.8.3.1:
d4d03ab3df7dbbce6280b89844bf698d lxpup-by-sfs_S.5.6.02.sfs c. 12MB
PLUS the attached pet
Install as described in post #1
For Slacko 5.6 and Upup-Precise 3.8.3.1:
d4d03ab3df7dbbce6280b89844bf698d lxpup-by-sfs_S.5.6.02.sfs c. 12MB
PLUS the attached pet
- Attachments
-
- lxpupsetup-s.5.6.021.pet
- New version 24-sep-13
- (39.57 KiB) Downloaded 896 times
-
- Screenshot.png
- (158.64 KiB) Downloaded 2237 times
Last edited by peebee on Tue 24 Sep 2013, 21:08, edited 12 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Precise version
NEW VERSION 8-sep-13
Install as described in post #1
For Precise Puppy 5.7:
7e93df2f9006d50a7d7aa5d09bd4827e lxpup-by-sfs_P.5.7.02.sfs c. 12MB
PLUS this pet: lxpupsetup-p.5.7.021.pet c. 600KB
Install as described in post #1
For Precise Puppy 5.7:
7e93df2f9006d50a7d7aa5d09bd4827e lxpup-by-sfs_P.5.7.02.sfs c. 12MB
PLUS this pet: lxpupsetup-p.5.7.021.pet c. 600KB
Last edited by peebee on Sun 22 Sep 2013, 14:34, edited 7 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Upup Raring version
NEW VERSION 8-sep-13
Install as described in post #1
For Upup Raring 3.9.9:
ab76117daaf011da31eb42444894c6c8 lxpup-by-sfs_R.3.9.9.02.sfs c. 12MB
PLUS the attached pet
Install as described in post #1
For Upup Raring 3.9.9:
ab76117daaf011da31eb42444894c6c8 lxpup-by-sfs_R.3.9.9.02.sfs c. 12MB
PLUS the attached pet
- Attachments
-
- lxpupsetup-r.3.9.9.021.pet
- New version 24-sep-13
- (112.79 KiB) Downloaded 849 times
Last edited by peebee on Tue 24 Sep 2013, 21:09, edited 8 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup by SFS for Slacko, Precise and Upup-Raring
I didn't want to start with a fresh frugal install so I backed up my
current slacko save file and loaded the lxde.sfs, I got some strange
results
At first I thought it was jwm running because I saw no sign of lxde,
then I discovered lxde was hidden behind the jwm panel so I moved that
panel to the top of the screen.
I'm running both window managers at once, the lxde menu works but the
jwm menu works too, right clicks bring up the jwm menu.
Very interesting
current slacko save file and loaded the lxde.sfs, I got some strange
results
At first I thought it was jwm running because I saw no sign of lxde,
then I discovered lxde was hidden behind the jwm panel so I moved that
panel to the top of the screen.
I'm running both window managers at once, the lxde menu works but the
jwm menu works too, right clicks bring up the jwm menu.
Very interesting
- Attachments
-
- lxdescreen.jpg
- (47.72 KiB) Downloaded 2190 times
Re: LxPup by SFS for Slacko, Precise and Upup-Raring
Hi BilltooBilltoo wrote:I didn't want to start with a fresh frugal install so I backed up my
current slacko save file and loaded the lxde.sfs, I got some strange
results
At first I thought it was jwm running because I saw no sign of lxde,
then I discovered lxde was hidden behind the jwm panel so I moved that
panel to the top of the screen.
I'm running both window managers at once, the lxde menu works but the
jwm menu works too, right clicks bring up the jwm menu.
Very interesting
Sounds like you've probably not followed the installation instructions in post #1??
Backing up your savefile should be safe of course....
But you do need to load both the sfs and the pet and then change wm's with xwin startlxde at the console to get the full experience.
Which file manager were you seeing? If you hadn't installed the pet it would be rox I think...
But then how did you start lxde????
You have me confused!!
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: LxPup by SFS for Slacko, Precise and Upup-Raring
I just loaded the sfs, I missed pet.peebee wrote:
Hi Billtoo
Sounds like you've probably not followed the installation instructions in post #1??
Backing up your savefile should be safe of course....
But you do need to load both the sfs and the pet and then change wm's with xwin startlxde at the console to get the full experience.
Which file manager were you seeing? If you hadn't installed the pet it would be rox I think...
But then how did you start lxde????
You have me confused!!
Cheers
peebee
I loaded the sfs and exited to the prompt, and then entered startx lxde.
I like this setup, I think I'll keep using it the way it is even though I screwed up and didn't follow the instructions, it's kind of cool
LxPup by SFS for Slacko, Precise and Upup-Raring
I downloaded and installed the pet, exited to the prompt and did xwin startlxde.
It's working properly now, looks nice.
Thanks
It's working properly now, looks nice.
Thanks
- Attachments
-
- lxdescreen2.jpg
- (43.63 KiB) Downloaded 2125 times
Re: LxPup by SFS for Slacko, Precise and Upup-Raring
Thanks for trying the "official way"Billtoo wrote:I downloaded and installed the pet, exited to the prompt and did xwin startlxde.
It's working properly now, looks nice.
Thanks
The pet does a bit of useful configuration and setup to complement the basic components in the sfs so the combination of the both is recommended.
BTW - do not try to upgrade the base Puppy to a later version without reverting to JWM and uninstalling both pet and sfs first!!
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Your packages work well. Videos with the localization of the Russian language rodin.s
http://www.youtube.com/watch?v=JpI5eTDy ... J2PF4BXrEA
http://www.youtube.com/watch?v=JpI5eTDy ... J2PF4BXrEA
Black screen
Hi PeeBee,
Not sure if this is a Slacko issue, or compiz/lxde. When I installed as described Slacko frugal went well. But after sfs es and pet and reboot my desktop was black. I tried installin video driver (nVidia 7200) and the control panel suggested a driver, but that driver was not present in any of the mirrors.
Then I looked at the puppy slacko14 repo, and there it was. But
It would not install. So i am still looking at a black desktop.
Any help ?
Not sure if this is a Slacko issue, or compiz/lxde. When I installed as described Slacko frugal went well. But after sfs es and pet and reboot my desktop was black. I tried installin video driver (nVidia 7200) and the control panel suggested a driver, but that driver was not present in any of the mirrors.
Then I looked at the puppy slacko14 repo, and there it was. But
It would not install. So i am still looking at a black desktop.
Any help ?
Re: Black screen
Hi VolhoutVolhout wrote:Hi PeeBee,
Not sure if this is a Slacko issue, or compiz/lxde. When I installed as described Slacko frugal went well. But after sfs es and pet and reboot my desktop was black. I tried installin video driver (nVidia 7200) and the control panel suggested a driver, but that driver was not present in any of the mirrors.
Then I looked at the puppy slacko14 repo, and there it was. But
It would not install. So i am still looking at a black desktop.
Any help ?
Sounds like an nvidia driver problem with Compiz.....
Have you tried LxPup-by-SFS on it's own without Compiz? Does that work?
Have you checked which version of the nvidia driver your card needs? I suspect the 7200 maybe needs the 304.88 driver.
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then you need to get the correct version of the driver for your kernel - which kernel is your Slacko?
http://slacko.01micko.com/notes.html
- [ ] nvidia_latest-304.64-3.2.33-4g.pet 12-Nov-2012 07:50 38M
[ ] nvidia_latest-304.64-3.4.17-PAE.pet 12-Nov-2012 08:36 38M
[ ] nvidia_latest-325.15-3.4.52-4g.pet 09-Aug-2013 07:31 38M
[ ] nvidia_latest-325.15-3.10.5-PAE.pet 09-Aug-2013 07:32 38M
[ ] nvidia_legacy-173.14.36-3.2.33-4g.pet 12-Nov-2012 08:49 13M
[ ] nvidia_legacy-173.14.36-3.4.17-PAE.pet 12-Nov-2012 08:50 13M
[ ] nvidia_legacy-304.88-3.4.52-4g.pet 09-Aug-2013 04:16 38M
[ ] nvidia_legacy-304.88-3.10.5-PAE.pet 09-Aug-2013 04:16 38M
[ ] nvidia_old-173.14.37-3.4.52-4g.pet 09-Aug-2013 04:16 13M
[ ] nvidia_old-173.14.37-3.10.5-PAE.pet 09-Aug-2013 04:16 13M
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
nVidia
Hi Peebee,
I installed Slacko 5.6 4G on my laptop with Intel Pentium M.
Did not try LXDE alone, simply went for the whole thing.
Will do some experimenting tonight. It was very late last night, so I typed the post this morning between coffee and bread, and went off to work.
The control panel, under "VGA driver" suggested the "legacy 173.xx....." nVidia driver. And that is the one I took from the repo. I can try to experiment with the other drivers. Maybe it is simply that the driver that was suggested by the control panel was the wrong one. In that case it is a Slacko issue, that the Pupcontrol was not updated with the kernel change.
There is a legacy_304..........3.4.52-4g, and a old_173.......3.4.52_4g, but not a legacy_173.........3.4.52-4g.....
I'll keep you informed how it goes...
I installed Slacko 5.6 4G on my laptop with Intel Pentium M.
Did not try LXDE alone, simply went for the whole thing.
Will do some experimenting tonight. It was very late last night, so I typed the post this morning between coffee and bread, and went off to work.
The control panel, under "VGA driver" suggested the "legacy 173.xx....." nVidia driver. And that is the one I took from the repo. I can try to experiment with the other drivers. Maybe it is simply that the driver that was suggested by the control panel was the wrong one. In that case it is a Slacko issue, that the Pupcontrol was not updated with the kernel change.
There is a legacy_304..........3.4.52-4g, and a old_173.......3.4.52_4g, but not a legacy_173.........3.4.52-4g.....
I'll keep you informed how it goes...
New versions 02
8-sep-13
New versions have been uploaded.
These have come about after discsussions with radky - many thanks to him.
They tidy up compatibility between lxpanelx and lxpanel so that PupClockSet will work.
The LXDE LxAppearance module has been removed (as it didn't work properly) and replaced by a substitute - there is now just one menu item under Desktop - "Change appearance" which then leads to desktop, windows, theme, panel, icons and cursor changers.
N.B. because of the changes to lxpanelx, if you have customised your panel in any way it may not survive an update - suggest you uninstall all existing LxPup-by-SFS components and delete any lxpanel or lxpanelx folders to be found in root/.config or in /usr/share before reinstalling the new version. You will need to reinstate your customisations afterwards.
Cheers
peebee
New versions have been uploaded.
These have come about after discsussions with radky - many thanks to him.
They tidy up compatibility between lxpanelx and lxpanel so that PupClockSet will work.
The LXDE LxAppearance module has been removed (as it didn't work properly) and replaced by a substitute - there is now just one menu item under Desktop - "Change appearance" which then leads to desktop, windows, theme, panel, icons and cursor changers.
N.B. because of the changes to lxpanelx, if you have customised your panel in any way it may not survive an update - suggest you uninstall all existing LxPup-by-SFS components and delete any lxpanel or lxpanelx folders to be found in root/.config or in /usr/share before reinstalling the new version. You will need to reinstate your customisations afterwards.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Eye-candy
I've been playing around with using the new "Change appearance" tools to change the appearance of LxPup-by-SFS.
I've created a repository to hold various themes and icons -
LxPup-by-SFS Eye-Candy Repository
Read the README file for a description of whats in the repository and how to install and activate the items.
Some themes on some Puppies may not show as available when loaded - a pet of the gtk-engine-murrine is available in the repository to try to fix this. (not needed for Upup-Raring).
Any suggestions for things to add to the repository are welcomed.
As examples see the attached reskin screenies (comments indicate the components used).
The setup pets now include an amended appearance tool with a button to access the repository and have been reuploaded.
Cheers
peebee
I've created a repository to hold various themes and icons -
LxPup-by-SFS Eye-Candy Repository
Read the README file for a description of whats in the repository and how to install and activate the items.
Some themes on some Puppies may not show as available when loaded - a pet of the gtk-engine-murrine is available in the repository to try to fix this. (not needed for Upup-Raring).
Any suggestions for things to add to the repository are welcomed.
As examples see the attached reskin screenies (comments indicate the components used).
The setup pets now include an amended appearance tool with a button to access the repository and have been reuploaded.
Cheers
peebee
- Attachments
-
- image-3.png
- Box icons, crunchy window decoration, wdz8 theme (upup-raring built in)
- (96.93 KiB) Downloaded 1609 times
-
- image-1.png
- Faenza icons, goldob window decoration, clearlooks-coffeebag widget theme
- (182.75 KiB) Downloaded 1689 times
-
- image-2.png
- Azenis-red icons, mars window decoration, easylistening-pale widget theme
- (131.87 KiB) Downloaded 1564 times
-
- Screenshot_2013-09-10.png
- (43.04 KiB) Downloaded 1677 times
Last edited by peebee on Wed 11 Sep 2013, 20:36, edited 4 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64