X-precise-2.4 Final
fd0
Hmmm... my mistake, the file requires another click on your desktop fd0 .pet icon to unmount after closing the file dialog box. (not used to watching for that flash-notice up in the r/h corner yet )
FYI... the fd0 .pet above works for x-Slacko also!
>>>---Indian------>
FYI... the fd0 .pet above works for x-Slacko also!
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Re: fd0
I thought I mentioned you have to use the same icon to unmount, sorry.sszindian wrote:Hmmm... my mistake, the file requires another click on your desktop fd0 .pet icon to unmount after closing the file dialog box. (not used to watching for that flash-notice up in the r/h corner yet )
FYI... the fd0 .pet above works for x-Slacko also!
>>>---Indian------>
Ya, I actually made it in X-slacko and tried it in both.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
hello
first of all I must say that xprecise is something different and I like it very much, but (there is always a but)
everytime i try to install a pet from web or from package manager my xpup crashes
it goes in text mode and it stops working, only thing to do is to turn it off.
i realy nead Inkscape on my puppy and vlc player, i tried booting precise 7.5.1 cd with xprecise save file and install packages and it works but when i boot in xprecise desktop is gone, no icons no nothing just a gray background
first of all I must say that xprecise is something different and I like it very much, but (there is always a but)
everytime i try to install a pet from web or from package manager my xpup crashes
it goes in text mode and it stops working, only thing to do is to turn it off.
i realy nead Inkscape on my puppy and vlc player, i tried booting precise 7.5.1 cd with xprecise save file and install packages and it works but when i boot in xprecise desktop is gone, no icons no nothing just a gray background
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
I added some stuff to petget, a file overwrite warning and a dep check. One of them is causing petget to hang randomly and lock up the desktop. Ironically, I'm working on that right this moment and will hopefully solve the issue (so far so good).drgonz047 wrote:hello
first of all I must say that xprecise is something different and I like it very much, but (there is always a but)
everytime i try to install a pet from web or from package manager my xpup crashes
it goes in text mode and it stops working, only thing to do is to turn it off.
i realy nead Inkscape on my puppy and vlc player, i tried booting precise 7.5.1 cd with xprecise save file and install packages and it works but when i boot in xprecise desktop is gone, no icons no nothing just a gray background
In the mean time, download the installpkg.sh.gz below and extract it to /usr/local/petget and see if that fixes the problem. Make sure it's executable after extracting. Right click on it and select "make executable".
I wouldn't recommend using precise with X-precise savefile, one uses jwm/rox and the other Xfce/thunar as well as lots of other changes. When you used it in precise it must have added some stuff to make X-precise break. X-precise-2.2 should be out in the next few days with some bug fixes.
- Attachments
-
- installpkg.sh.gz
- (9.31 KiB) Downloaded 352 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
it works nice thank you
finaly puppy to recommend
on other laptop i have trouble with a Ralink RT2500 Wireless LAN Card => RT2560f chipit acts like it-s turned off and there is no off/on switch like on some laptops
finaly puppy to recommend
on other laptop i have trouble with a Ralink RT2500 Wireless LAN Card => RT2560f chipit acts like it-s turned off and there is no off/on switch like on some laptops
Last edited by drgonz047 on Sat 12 Oct 2013, 02:52, edited 1 time in total.
Tried the above in x-slacko 1.0 non-PAE. Seems to fix the blowups on pet installs there too. I flogged it quite mercilessly chasing and adding libraries to an emendo pet and it both installed the pets and found dependencies ok.rg66 wrote:
I added some stuff to petget, a file overwrite warning and a dep check. One of them is causing petget to hang randomly and lock up the desktop. Ironically, I'm working on that right this moment and will hopefully solve the issue (so far so good).
In the mean time, download the installpkg.sh.gz below and extract it to /usr/local/petget and see if that fixes the problem. Make sure it's executable after extracting. Right click on it and select "make executable".
Thanks,
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Hmmm, I didn't get that in X-slacko. If it's doing it there I need to change the installpkg.sh as well. Looks like it was the file clobber overwrite check that I borrowed from lina.Marv wrote:Tried the above in x-slacko 1.0 non-PAE. Seems to fix the blowups on pet installs there too. I flogged it quite mercilessly chasing and adding libraries to an emendo pet and it both installed the pets and found dependencies ok.
Thanks,
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
re: xprecise 2.1.1...................
I can print with my wireless printer (hp deskjet 3510) on my toshiba laptop (a135-s4527) but cannot scan a document with simple scan, peasyscan, or xsane scanner. I have loaded the current driver (hplip_scan_3.13.7.pet). Any suggestions would be appreciated. Thank you.
I can print with my wireless printer (hp deskjet 3510) on my toshiba laptop (a135-s4527) but cannot scan a document with simple scan, peasyscan, or xsane scanner. I have loaded the current driver (hplip_scan_3.13.7.pet). Any suggestions would be appreciated. Thank you.
In the past, what procedures have you used to set up network scanning in other Puppies?yr1945 wrote:but cannot scan a document with simple scan, peasyscan, or xsane scanner. I have loaded the current driver (hplip_scan_3.13.7.pet).
I just installed X-Precise-2.1.1 with hplip_scan_3.13.9.pet. Using Peasyscan, I set up network scanning to an HP unit. It worked correctly.
Connect your DJ 3510 directly by USB and test.
Read the Peasyscan Help. It discusses configuration files and how to use them for network scanning to HP units. In your case, you would need a configuration file with a single line like
Modify it to use your printer's name and IP address.
I expect that the correct printer name is Deskjet_3510_series
Code: Select all
<uri>hpaio:/net/Officejet_4500_G510n-z?ip=192.168.2.215</uri>
I expect that the correct printer name is Deskjet_3510_series
@rcrsn51... Thank you for trying to help... I read everything you suggested and tried to make the terminal entries, but just get "no such file" or something similar... anyway, if I have to scan another document I will just connect via USB... Thank you again... PS: I will keep reading and experimenting... perhaps at some point in the future I will learn to scan using my wireless router...
Okay... let's solve it now...
Yes, I have created a configuration file, but it's incorrect. I am not sure which IP address to use... it looks like I have 3 different types (external & Bcast & inet address). I used the inet address...
Also, relative to the script you gave me, immediately following my printer description should I have included "G510n-z?ip"?? I didn't (see below).
Anyway, when I press start, I get an error message (see below).
I was going to try and work this out myself, but I'm sure it will be much better with your help.
Thank you.
Yes, I have created a configuration file, but it's incorrect. I am not sure which IP address to use... it looks like I have 3 different types (external & Bcast & inet address). I used the inet address...
Also, relative to the script you gave me, immediately following my printer description should I have included "G510n-z?ip"?? I didn't (see below).
Anyway, when I press start, I get an error message (see below).
I was going to try and work this out myself, but I'm sure it will be much better with your help.
Thank you.
- Attachments
-
- Screenshot.png
- (19.85 KiB) Downloaded 311 times
-
- Screenshot-1.png
- (9.95 KiB) Downloaded 294 times
Please post the contents of the configuration file that you created.
You may just have missed the "?ip"
You may just have missed the "?ip"
Code: Select all
hpaio:/net/Deskjet_3510_series?ip=192.168.1.100
Last edited by rcrsn51 on Mon 14 Oct 2013, 00:57, edited 1 time in total.
oops... the following are the contents of my configuration file named wireless...
- Attachments
-
- Screenshot-2.png
- (50.98 KiB) Downloaded 311 times
below is the results of my scanner name...
the IP must be mine... how do I get the IP address of the printer/scanner?
the IP must be mine... how do I get the IP address of the printer/scanner?
- Attachments
-
- Screenshot-4.png
- (20.87 KiB) Downloaded 308 times