gtkpod 2.0.2 (outdated 2011 version)
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Unfortunately, no.smokey01 wrote:has there been any advancement for the iPod nano gen6.
But as I mentioned on the previous page, there's a workaround by "jailbreaking" your device.
If you're happy to hack your Nano's firmware, I can provide some advice via PM.
All I can say on a public forum is that the hacked firmware for a Nano is called "Nan0hail".
I can't post hacking instructions, or links to hacked firmware, because this (arguably) contravenes Apple's intellectual property, and they have been known to issue takedown notices to webpages which publish such information.
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Re: gtkpod 2.0.2 for iPod-Touch & iPhone
Good morning.
Please excuse, tempestuous and others;
My friend was just given a first-generation iPod.
I thought to put some more music files on it.
Am concerned not to screw up her iPod.
I have never used an iPod or other Apple product before.
Somehow online searching led to this thread.
Before asking any more, may I just ask about this: libanjuta "failed to install"
2078403 2013-11-13 10:22 /mnt/sda4/sources/LinuxSourc/libanjuta-1.0-Puppy5.pet
Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
Any help will be much appreciated.
Sheldon
Please excuse, tempestuous and others;
My friend was just given a first-generation iPod.
I thought to put some more music files on it.
Am concerned not to screw up her iPod.
I have never used an iPod or other Apple product before.
Somehow online searching led to this thread.
Before asking any more, may I just ask about this: libanjuta "failed to install"
2078403 2013-11-13 10:22 /mnt/sda4/sources/LinuxSourc/libanjuta-1.0-Puppy5.pet
Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
Any help will be much appreciated.
Sheldon
tempestuous wrote:gtkpod is an iPod manager for Linux.
You must install these two dotpets:
http://minipc.org/ipup/download/gtkpod-2.0.2.pet 2.6 MB
http://minipc.org/ipup/download/libanju ... Puppy5.pet 2.1 MB
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
The installation error may relate to your particular version of Puppy.
from
http://distro.ibiblio.org/puppylinux/puppy-5.2.8/
Can you give more details about your Puppy version, and a download link?
"5.2.8.6" ? The most recent version of Lucid Puppy I can find is lupu-528.005.isosheldonisaac wrote:Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
from
http://distro.ibiblio.org/puppylinux/puppy-5.2.8/
Can you give more details about your Puppy version, and a download link?
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Good day, tempestuous.
.
Richard Erwin (with help from playdayz,...) has been working on an update to lupu-528.005. I suppose the kernel is the same, but some newer utilities and applications?
http://www.mediafire.com/folder/dc28t2r ... es-5.2.8.6
I downloaded the lupumini-5.2.8.6-20131028.iso
Here's a post from him on November 6, on the page
http://www.murga-linux.com/puppy/viewto ... start=2490
Sheldon
.
Sorry, i wasn't clear enough.tempestuous wrote:The installation error may relate to your particular version of Puppy.
"5.2.8.6" ? The most recent version of Lucid Puppy I can find is lupu-528.005.iso from http://distro.ibiblio.org/puppylinux/puppy-5.2.8/sheldonisaac wrote:Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
Can you give more details about your Puppy version, and a download link?
Richard Erwin (with help from playdayz,...) has been working on an update to lupu-528.005. I suppose the kernel is the same, but some newer utilities and applications?
http://www.mediafire.com/folder/dc28t2r ... es-5.2.8.6
I downloaded the lupumini-5.2.8.6-20131028.iso
Here's a post from him on November 6, on the page
http://www.murga-linux.com/puppy/viewto ... start=2490
Thanks for your help,rerwin wrote:That is the plan. Playdayz has offered a link to a new thread, which I plan to start after my next uploaded version.bigpup wrote:Any chance of Playdayz putting some info about the Lupu 5.2.8.6 update in the first post of this topic?
Maybe time to start new topic for Lupu 5.2.8.6?
The delay, now, is to complete an upgraded pfbpanel. Radky and I are working it over, to kill bugs, shrink the window and add some of the Stu90 plugins that also need some work.
Richard
Sheldon
- Attachments
-
- image-2.png
- (75.2 KiB) Downloaded 406 times
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Hello Sheldon
I used gtkpod 2.0.2 with the origional 528 with playdayz updates but before 528.005. It worked well for transfering music although it did not transfer the images associated with it. I also tried to both delete and add some images. This caused some problems as every thing looked OK with the thumnails but the phone no longer saw the high res images even although they were still there when the phone was mounted as a drive. I think I have some posts about this on this thread. Have just installed the libanjuta-1.0-Puppy5.pet to my test savefile on 5286 with no problems. This was stored on a flash drive (see attached). Perhaps your download was corrupted. I think you will also need the hot fix pet. Don't have much time just now but I will install the whole thing tonight and see if it all works on 5286. Hope this helps.
Regards,
Ken.
I used gtkpod 2.0.2 with the origional 528 with playdayz updates but before 528.005. It worked well for transfering music although it did not transfer the images associated with it. I also tried to both delete and add some images. This caused some problems as every thing looked OK with the thumnails but the phone no longer saw the high res images even although they were still there when the phone was mounted as a drive. I think I have some posts about this on this thread. Have just installed the libanjuta-1.0-Puppy5.pet to my test savefile on 5286 with no problems. This was stored on a flash drive (see attached). Perhaps your download was corrupted. I think you will also need the hot fix pet. Don't have much time just now but I will install the whole thing tonight and see if it all works on 5286. Hope this helps.
Regards,
Ken.
- Attachments
-
- gtkpodpets.png
- (18.36 KiB) Downloaded 485 times
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Good morning, tempestuous.tempestuous wrote:Well I just downloaded lupumini-5.2.8.6-20131028.iso
burned it to CD, booted to the CD (I hate the orange desktop theme)
then installed libanjuta dotpet ...
works fine for me.
Your dotpet download(s) might be corrupt.
Or you might need a fresh installation?
Thanks a lot for this.
I changed the orange desktop of the new LuPu right away!
I'll try another download of libanjuta now.
(Thanks also, keniv, for your response)
Is there a md5sum , to check it?
Thanks again,
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
md5sums
Hi, tempestuous. Thanks for your reply.
0a4fb65fbbac28d96e70aa89e140ad1a libanjuta-1.0-Puppy5.pet
on two separate downloads
For gtkpod, I got the same as you said.
Any thoughts as to how to get a good copy of libanjuta?
Thanks again,
Sheldon
EDIT:
I was able to get a good download from
http://minipc.org/ipup/download/
thanks to the advice there to use wget
For libanjuta, I gottempestuous wrote:The md5sum for libanjuta-1.0-Puppy5.pet is
96aef29182e4898d3dd01167efd983de
The md5sum for gtkpod-2.0.2.pet is
ce148f72353bfd3496f4da49ff32da2a
0a4fb65fbbac28d96e70aa89e140ad1a libanjuta-1.0-Puppy5.pet
on two separate downloads
For gtkpod, I got the same as you said.
Any thoughts as to how to get a good copy of libanjuta?
Thanks again,
Sheldon
EDIT:
I was able to get a good download from
http://minipc.org/ipup/download/
thanks to the advice there to use wget
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
How to load iPod shuffle
OK, gtkpod 2.0.2 runs, thank you.
Is it correct that, after I mount the 1st-generation iPod shuffle to a
directory, such as /mnt/sdb1, the first thing to do is
"Load selected iPod" ?
The shuffle does not show up to be loaded.
What can be done?
Thanks,
Sheldon
Is it correct that, after I mount the 1st-generation iPod shuffle to a
directory, such as /mnt/sdb1, the first thing to do is
"Load selected iPod" ?
The shuffle does not show up to be loaded.
What can be done?
Thanks,
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia