Update on SFS file: chromium-30.0.1599.101-i486.sfs
Used same setup ( 1 link: /usr/lib/chromium ) that worked with: chromium-30.0.1568.0.sfs
### Please see post above and let me know if it`s your file peebee ( I think it is...).
But chromium-30.0.1599.101-i486.sfs errors on my Puppy Precise-5.5.X.5: Too damn many Puppies.! It must drive you app builders nutty.!
[8239:8313:1203/235450:FATAL:nss_util.cc(396)] NSS_VersionCheck("3.14.3") failed. NSS >= 3.14.3 is required. Please upgrade to the latest NSS, and if you still get this error, contact your distribution maintainer.
Aborted
[8239:8313:1203/235450:FATAL:nss_util.cc(396)] NSS_VersionCheck("3.14.3") failed. NSS >= 3.14.3 is required. Please upgrade to the latest NSS, and if you still get this error, contact your distribution maintainer.Aborted
Hi sunburnt
I think your error message says it all - the 30.0.1599 Chromium demands a later version of NSS than you have in the Puppy version you are using.
You have 3 options:
- stay with the older version of Chromium that works
- move to a more up-to-date Puppy
- try to update NSS to the required version
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
On Slacko 5.6.5.2 (5.7 in testing) it "mainly" works but has an oddity in that the window Maximise/Restore button doesn't work - no idea why as there are no error messages when run in a terminal.
Does not include FlashPlayer - download using the GetFlash Install Flashplayer in the menu under Internet.
I did try it with the Pepper FlashPlayer plugin but this didn't work with BBC iPlayer.....
As I posted in Canon 2012 printer update section, have been trying to find way to print with new Canon MX922. No CUPS driver, and Debian Linux CUPS driver just dumped print into bit bucket and reported print complete. Installed Chrome 21 pet posted by Playdaz a while back and MX922 Cloud printer found, worked fine. Installed peebee most recent Chrome 33 update for Slacko 5.7 which worked fine as browser but unable to find my MX922 Cloud enabled printer, booted USB flash with older Chrome 21 and cloud printer found and worked fine. So I don't know what needs to be done to make Chrome 33 work with cloud printing.
Still would prefer CUPS driver for Canon MX922, but so far not successful.
Dpup wrote:As I posted in Canon 2012 printer update section, have been trying to find way to print with new Canon MX922. No CUPS driver, and Debian Linux CUPS driver just dumped print into bit bucket and reported print complete. Installed Chrome 21 pet posted by Playdaz a while back and MX922 Cloud printer found, worked fine. Installed peebee most recent Chrome 33 update for Slacko 5.7 which worked fine as browser but unable to find my MX922 Cloud enabled printer, booted USB flash with older Chrome 21 and cloud printer found and worked fine. So I don't know what needs to be done to make Chrome 33 work with cloud printing.
Still would prefer CUPS driver for Canon MX922, but so far not successful.
Thanks for any suggestions or fix.
Have you tried to run chromium from a terminal to see if there are any error messages when you print?
I would strongly suspect missing library dependendencies....but you need some diagnostics to determine which.
Another tack would be to google the problem to see if others have had it.
This is chromium - not chrome - they are different....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks for the quick response. This is my first time use of Chrome or Chromium, or Cloud printing. The Playdaz pet is earlier version Chrome not Chromium.
Ran Chromium from console, did get one error message about PostClientToServer Message() Failed during GetUpdates. However found that my response to encryption of data caused failure to log on to my Google account, and that was reason the MX922 Cloud printer not showing. So now can Cloud print fine.
What I see now concerns me about security. Can see all my CUPS devices, The MX922 cloud printer, my smart phone and tablet... and each can see time date stamp and file name of everything that I printed with it or on any other device I have. My home WiFi router, printer, are running WPA2 TKIP. if that helps.
Thanks again for Chromium 33. Would also like to see what others have experienced and their comments too.
Dpup wrote:Thanks for the quick response. This is my first time use of Chrome or Chromium, or Cloud printing. The Playdaz pet is earlier version Chrome not Chromium.
Ran Chromium from console, did get one error message about PostClientToServer Message() Failed during GetUpdates. However found that my response to encryption of data caused failure to log on to my Google account, and that was reason the MX922 Cloud printer not showing. So now can Cloud print fine.
What I see now concerns me about security. Can see all my CUPS devices, The MX922 cloud printer, my smart phone and tablet... and each can see time date stamp and file name of everything that I printed with it or on any other device I have. My home WiFi router, printer, are running WPA2 TKIP. if that helps.
Thanks again for Chromium 33. Would also like to see what others have experienced and their comments too.
May be better to post over in the Security threads.....
When trying to videoconference - the videoconference app complained that Flash was old (it was a 2013 versio).
I downloaded the newest version from Adobe & installed it.
When I tried to connect it worked but my camera would not show - then I noticed a yellow bar which said Flash had crashed.
I downloaded and replaced Flash & changed the properties & permissions to wide open & executable - now no crash error but still no image (I can see the person at the other end).
This is running on a MSI Netbook, Chromium 32, Puppy Precise 5.7.1.