Nothing wrong with the above but /live/image should be the mountpoint of the home drive I think, not /dev/shm.root@debian:~# ls /live
01-filesystem.squashfs cow image
root@debian:~#
Fred
Code: Select all
LABEL DebianDog beta
MENU DebianDog LB-3x in RAM
LINUX /live/vmlinuz1
append initrd=/live/initrd.img boot=live toram=01-filesystem.squashfs config nouser nopersistent noswap nosmp noprompt nocd noeject quickreboot autologin elevator=noop video=i915:modeset=1 i915.i915_enable_rc6=1 i915.lvds_downclock=1 i915.i915_enable_fbc=1 ipv6.disable=1
ENDTEXT
Code: Select all
root@debian:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 1010M 4.3M 1005M 1% /
udev 10M 0 10M 0% /dev
tmpfs 202M 280K 202M 1% /run
/dev/shm 158M 153M 4.9M 97% /lib/live/mount/medium
/dev/loop0 153M 153M 0 100% /lib/live/mount/rootfs/01-filesystem.squashfs
tmpfs 1010M 0 1010M 0% /lib/live/mount/overlay
tmpfs 1010M 0 1010M 0% /lib/live/mount/overlay
aufs 1010M 4.3M 1005M 1% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 1.2G 0 1.2G 0% /run/shm
tmpfs 1.2G 16K 1.2G 1% /tmp
root@debian:~#
Code: Select all
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nodev,nosuid,size=60%,mode=1777 0 0
/live/image is for boot partition in squeeze (initrd1.img) and /lib/live/mount/medium is for boot partition in wheezy. in short:anikin wrote:Code: Select all
/dev/shm 158M 153M 4.9M 97% /lib/live/mount/medium
Nothing wrong here also. In Wheezy Live /etc/fstab.d/live content goes in /etc/fstab Normal Wheezy Live bahaviour. It was different in Squeeze. This is actually difference in live-boot version 2 and 3 and it is included and executed from initrd1.img and initrd.imgI also have this in fstab:which is wrong, I think, because this should be in fstab.d/live (if I understand it correctly). I mean I only added the tmpfs line - I don't know how the aufs line gets written there.Code: Select all
aufs / aufs rw 0 0 tmpfs /tmp tmpfs nodev,nosuid,size=60%,mode=1777 0 0
That's not a very good scoreToni wrote:Tested portable DebianDog-Installer in Lupu-528 and Fluppy.
Lupu-528 - Frugal and Full install failed.
Fluppy - Full failed Frugal success.
Code: Select all
# /mnt/home/downloadspuppy/debdoginstall/AppRun
SCRIPTDIR=/mnt/home/downloadspuppy/debdoginstall
library_path=/mnt/home/downloadspuppy/debdoginstall/usr/lib:/mnt/home/downloadspuppy/debdoginstall/usr/lib/i386-linux-gnu:/lib:/usr/lib:/usr/X11R7/lib:/root/my-applications/lib:/opt/qt4/lib:/usr/lib/seamonkey:/opt/samba/lib
/mnt/home/downloadspuppy/debdoginstall/AppRun: line 18: 5448 Segmentation fault Xdialog --title "DebianDog Installer" --clear --radiolist "Please select what type install you would like to do: " 13 110 3 "frugal-install" "bootloaders grub4dos, syslinux and extlinux are supported." off "full-install" "bootloader grub4dos is supported (works with ext2,3,4, NTFS and FAT)." off 2>$tempfile
Code: Select all
87f21ad743afc7618aff7cbf5d245189 debdoginstall.tar.gz
Yes, sorry, added one library to much that's apparently conflicting. I just noticed the same while testing on Puppy ExprimoUnfortunately I get segmentation fault:
Code:
# /mnt/home/downloadspuppy/debdoginstall/AppRun
SCRIPTDIR=/mnt/home/downloadspuppy/debdoginstall
library_path=/mnt/home/downloadspuppy/debdoginstall/usr/lib:/mnt/home/downloadspuppy/debdoginstall/usr/lib/i386-linux-gnu:/lib:/usr/lib:/usr/X11R7/lib:/root/my-applications/lib:/opt/qt4/lib:/usr/lib/seamonkey:/opt/samba/lib
/mnt/home/downloadspuppy/debdoginstall/AppRun: line 18: 5448 Segmentation fault
There's improvement! Yes!Toni wrote:Full failed, Frugal Success on both Lupu-528 and Fluppy:
http://smokey01.com/saintless/Fredx181/ ... /test2.txt
I don't think you can make it work on all puppy versions and no need to try. Even pet packages and puppy-sfs files can't work on all.
Toni
Not even close but impossible I think on distro's with older kernel version than 2.6.38 (not supporting xz compression).Fred wrote:Yes, I agree it can't work on all puppy versions but looking at your output I think it's just one thing that fails: mounting 01-filesystem.squashfs on /media/target. So it's close to working.
Good idea!portable installer executable with chmod +x permissions and include it in the iso outside /live directory. It will be easy to extract it from puppy or other linux and make frugal install for testing. Full install can be made from DebianDog later if needed.
Thanks, Fred.fredx181 wrote:Tip for Jwm version for more advanced terminal: roxterm from squeeze (the one from wheezy needs gtk3).
Tested on Jwm by only installing the .deb from here:
https://packages.debian.org/en/squeeze/roxterm
Even better, didn't know about existing roxterm-gtk2 package.I will add it as optional terminal. But after some playing with Wheezy alternative roxterm-gtk2 package I got this wheezy version with edited Control and added what is needed to work from dependencies.
I will add it.And Make-Swap-File GUI if you like to add it in OpenBox version:
Thank you, Fred!fredx181 wrote:New DebianDog-Installer appimage without needing parted (frugal install only).
Tested and working for me on: dpup Exprimo, Lupu-528, Saluki, Puppy Precise.
https://drive.google.com/file/d/0ByBgCD ... sp=sharing