X-precise-2.4 Final
I couldn't tell you, unfortunately. I was having the same error today, and discovered my system date was a day behind.
See if there's anything in your Puppy menu that'll automatically sync and correct your time and date, just to be sure.
Is Firefox up-to-date? You might try experimenting with the solutions on this page, see if anything there helps.
See if there's anything in your Puppy menu that'll automatically sync and correct your time and date, just to be sure.
Is Firefox up-to-date? You might try experimenting with the solutions on this page, see if anything there helps.
[ Puppy 4.3.1 JP, Frugal install ] * [ XenialPup 7.5, Frugal install ] * [XenialPup 64 7.5, Frugal install] * [ 4GB RAM | 512MB swap ]
In memory of our beloved American Eskimo puppy (1995-2010) and black Lab puppy (1997-2011).
In memory of our beloved American Eskimo puppy (1995-2010) and black Lab puppy (1997-2011).
I will tryMakoto wrote:I couldn't tell you, unfortunately. I was having the same error today, and discovered my system date was a day behind.
See if there's anything in your Puppy menu that'll automatically sync and correct your time and date, just to be sure.
Is Firefox up-to-date? You might try experimenting with the solutions on this page, see if anything there helps.
I am totally beginner.Can I ask, do you suggest this main system?
x-precise seems very good
As long as it works for you, it does everything you need, and you have no problems using it, it should be fine. Just be sure to ask on the forums if you have any questions.
[ Puppy 4.3.1 JP, Frugal install ] * [ XenialPup 7.5, Frugal install ] * [XenialPup 64 7.5, Frugal install] * [ 4GB RAM | 512MB swap ]
In memory of our beloved American Eskimo puppy (1995-2010) and black Lab puppy (1997-2011).
In memory of our beloved American Eskimo puppy (1995-2010) and black Lab puppy (1997-2011).
Congratulations on X-Precise (and xslacko). I'm sticking with X-Precise because of the specialist software I use to create virtual pipe organs. It is by far the best I've puppy I've ever played with.
I've done a tiny bit of cross breeding by adding whisker menu to X-Precise.
Thanks for all the hard work.
Regards
Graham
I've done a tiny bit of cross breeding by adding whisker menu to X-Precise.
Thanks for all the hard work.
Regards
Graham
- Attachments
-
- Screenshot-2.jpg
- (115.37 KiB) Downloaded 1494 times
I'm pretty sure that whisker is already in the panel add on menu, which had the source code edited so as to replace the user name" root " with " X-Precise " instead.moonskin wrote:I've done a tiny bit of cross breeding by adding whisker menu to X-Precise.
Thanks for all the hard work.
Regards
Graham
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
Doh!
I certainly missed that one. Thanks Geoffrey.
Still, I learned some new tricks.
I certainly missed that one. Thanks Geoffrey.
Still, I learned some new tricks.
- Attachments
-
- Screenshot.jpg
- (71.99 KiB) Downloaded 1675 times
I love X Precise!
Hi, I have been reading this site for a few hours, and have become extremely dis-appointed that the support for X - precise will end.
X Precise 2.0 is by far the best OS I have ever used.
It has it's quirks, but I still love it.
It's very stable and I really don;t want to lose it.
the only fault I have with it is that Firefox will jam my whole system if I try to load a large webpage, and my sound just refuses to work with Skype.
Other than that. I love it.
However since this is the X Precise thread, I wondered if you would re-consider supporting it?
I have some many requests, that I feel bad for asking them when you are considering abandoning X precise.
yet, I will still post them on the off-chance that someone may decide to either help me, or re-support the OS.
Basically I have been looking for ways to install torchat.
I find it's the easiest and best massaging service, yet, I can never get it to install on X precise.
my second idea revolved around full USB encryption. I was going to ask for this feature to be included in future releases or maybe a pet download if possible.
and my other idea was a security based x - precise.
one which runs TOR and maybe had a few other NSA proof tools.
(I also had serious problems trying to install the latest version of TOR>
I know I'm probably asking a dead thread now the X Precise will be disbanded. but I had to ask..
X Precise 2.0 is by far the best OS I have ever used.
It has it's quirks, but I still love it.
It's very stable and I really don;t want to lose it.
the only fault I have with it is that Firefox will jam my whole system if I try to load a large webpage, and my sound just refuses to work with Skype.
Other than that. I love it.
However since this is the X Precise thread, I wondered if you would re-consider supporting it?
I have some many requests, that I feel bad for asking them when you are considering abandoning X precise.
yet, I will still post them on the off-chance that someone may decide to either help me, or re-support the OS.
Basically I have been looking for ways to install torchat.
I find it's the easiest and best massaging service, yet, I can never get it to install on X precise.
my second idea revolved around full USB encryption. I was going to ask for this feature to be included in future releases or maybe a pet download if possible.
and my other idea was a security based x - precise.
one which runs TOR and maybe had a few other NSA proof tools.
(I also had serious problems trying to install the latest version of TOR>
I know I'm probably asking a dead thread now the X Precise will be disbanded. but I had to ask..
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
@ Newbie33
I'm glad you like X-precise, thanks for kind words.
I've been contemplating doing an update BUT, it would probably only be security updates like bash, wget, openssl, firefox and a few small changes. No promises though.
What it really needs is Xfce to be re-compiled and built from scratch but that's most likely not going to happen. I would recommend using X-slacko as it is much newer and still being developed.
As far as skype goes, OscarTalks has skype pets and sfs's for precise. I would use this one: skype-4.3.0.37-apulse-precise @ http://smokey01.com/OscarTalks/
I'm glad you like X-precise, thanks for kind words.
I've been contemplating doing an update BUT, it would probably only be security updates like bash, wget, openssl, firefox and a few small changes. No promises though.
What it really needs is Xfce to be re-compiled and built from scratch but that's most likely not going to happen. I would recommend using X-slacko as it is much newer and still being developed.
As far as skype goes, OscarTalks has skype pets and sfs's for precise. I would use this one: skype-4.3.0.37-apulse-precise @ http://smokey01.com/OscarTalks/
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
anks I wasn;t expecting such a friendly reply.
I found the newest skype recently, so that solved that problem.
My only concern with the slako version is it hs issues with AMD and some intel processor.
I am not sure if X precise has these issues but I personally have never run into this problem (so far).
However, since I often use puppy for connecting to machines whilst I;m travelling. the compatability is a little important to me.
(and would be really important if I come across a non compatable machine.
Anways, thats something for me to complain about some other time.
I would like to ask however, Do you know of a program (with a GUI) that can fully encrypt USB sticks? this is particualrly useful so some of the office ocuments I carry around. and the office files are far to large to keep in my save sfs file. Yet, I still have never really found a solution to this problem
I found the newest skype recently, so that solved that problem.
My only concern with the slako version is it hs issues with AMD and some intel processor.
I am not sure if X precise has these issues but I personally have never run into this problem (so far).
However, since I often use puppy for connecting to machines whilst I;m travelling. the compatability is a little important to me.
(and would be really important if I come across a non compatable machine.
Anways, thats something for me to complain about some other time.
I would like to ask however, Do you know of a program (with a GUI) that can fully encrypt USB sticks? this is particualrly useful so some of the office ocuments I carry around. and the office files are far to large to keep in my save sfs file. Yet, I still have never really found a solution to this problem
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
X-slacko doesn't have Intel/AMD issues since I re-compiled Xfce. It's actually X-precise that still has them, but it's only old P3 and Athlon processors such as XP-1500+ etc....
Don't know of any USB encryption gui, X-precise has bcrypt gui included but is hidden from menu. Go to /usr/share/applications > Bcrypt-file-encryption. It only does individual files though.
Don't know of any USB encryption gui, X-precise has bcrypt gui included but is hidden from menu. Go to /usr/share/applications > Bcrypt-file-encryption. It only does individual files though.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Xfmedia
X-precise musc more complete than X-tahr quite empty.
However when you go to a chinese restaurant, you need some chinese dishes, when i run a Puppy XFCE i need XFCE applications.
Xfmedia installed, and runs, plays my songs mp3
Install pet xinelib from Slacko here
How can I play my dvds with Parole? They don't show up under Media>DVD (mounted or not). I've loaded gst-plugins-base, good, bad, ugly, ffmpeg.
if dvd is encrypted yes you need libdvdcss
Xnoise can search lyrics, however your song must be famous.
However when you go to a chinese restaurant, you need some chinese dishes, when i run a Puppy XFCE i need XFCE applications.
Xfmedia installed, and runs, plays my songs mp3
Install pet xinelib from Slacko here
How can I play my dvds with Parole? They don't show up under Media>DVD (mounted or not). I've loaded gst-plugins-base, good, bad, ugly, ffmpeg.
if dvd is encrypted yes you need libdvdcss
Xnoise can search lyrics, however your song must be famous.
- Attachments
-
- Xnoise.jpg
- XFCE puppy is able to run XFCE apps !
- (52.38 KiB) Downloaded 398 times
Last edited by Pelo on Tue 09 Aug 2016, 04:37, edited 7 times in total.
X-precise : a job to do
Au Boulot la Puppy !
Import woof buitin data in Gnumeric Click the blue and watch how a user get the puppy working.. doing things, a last !
Import woof buitin data in Gnumeric Click the blue and watch how a user get the puppy working.. doing things, a last !
With x-precise a newbie will have applications to play,
X-precise is not perfect sure, but a newbie will have applications to play,
Puppy buiders use to zap to new Puppies once one is working. For help, unfortunately, they seldom come back, like artists.
Installing libdvdcss solved it., yes with but other tiny Linux OS. Would Puppy Linux fail ?
Puppy buiders use to zap to new Puppies once one is working. For help, unfortunately, they seldom come back, like artists.
Installing libdvdcss solved it., yes with but other tiny Linux OS. Would Puppy Linux fail ?
- Attachments
-
- 1998.jpg
- Parole with X-precise, i need libdvdcss !
- (65.24 KiB) Downloaded 316 times