maybe try the kernel from 5.8.3 http://ftp.nluug.nl/ftp/pub/os/Linux/di ... PAE.tar.xz unzip and copy the vmlinuz & zdrv.sfs over the installed ones and rebootLoboGrande wrote:Tahr pup 6.0 won't find the audio card on my '07 Toshiba Tecra M5. It won't even recognize my keyboard when running from a live cd on my Asus M5A97 mobo. Tahr 5.8.3 had no problems at all.
tahrpup 6.0, 6.0.2 & 6.0.5 CE
Re: No sound card found
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
they won't hurt anything, they are because i compiled urxvt so it could have tabs when the devx is loaded. you can get rid of them by ..... either adding this to the bottom of /root/.Xdefaults and restarting xtronkel wrote: Also, when trying to update the PPM, I'm getting a little error message on the yellow screen among the rest of the scrolling messages that there is a "compilation failure". Doesn't seem to cause any obvious problems though. Will keep an eye on it and post any adverse effects back here.
Code: Select all
URxvt.perl-ext:
URxvt.perl-ext-common:
i'll probably push this through quickpet just to get rid of the error messages for now.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
yes i couldn't figure out what to turn on in the kernel to get it working, in the beta a user had a similar problem with the via unichrome,peebee wrote:A report of problems with VIA Unichrome PRO S3G IGP graphics
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Re: Bugs with Compaq Presario CQ62
maybe try a different kernel http://ftp.nluug.nl/ftp/pub/os/Linux/di ... r/kernels/ read the read-mespintronic wrote:So I booted Tahrpup 6.0 CE from my windows partition. I'm using a Compaq Presario CQ62 laptop and although the OS booted up without problems my mouse does not move and non of my network interfaces were detected. I could not make further progress with the system. Slacko 5.7 PAE, on the other hand, works flawlessly.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
openssl is patchedMochiMoppel wrote:I haven't had time yet to test thoroughly, but some issues I noticed:
- Heartbleed bug not fixed
Uses affected version OpenSSL 1.0.1f 6 Jan 2014
- ROX overwrite confirm bug not fixed
- JWM seems to have an issue with tray item borders. There are none, though border attirbutes are set. With many windows open it's almost impossible to distinguish windows in the tasklist when they have no icon. I copied over an older JWM from Slacko and this worked as expected.
- xclip (/usr/X11R7/bin/xclip) is outdated. Version 0.08 lacks UTF-8 support. Fixed in version 0.12
- Doesn't wake up after suspended to RAM. To suspend I use command- Same issues with SCSI drivers as in Slacko6Code: Select all
sync && echo -n mem > /sys/power/state
jwm ...it's the new style jwm apparently, if you grab the latest snapshot there's no borders on anything, like in quirky unicorn, but if you grab the very latest from github you get some borders ..... maybe the next snapshot will have taskbar borders.
rox .... the new rox got missed, i'll update it. although maybe not through quickpet ...we'll see
not waking from suspend.... possibly kernel related (my netbook won't wake from suspend with 3.15 kernels but is fine with 3.14 kernels, so try a different kernel
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Planner Project Management Software Bug/Error
Planner Project Management Software Bug/Error:
Please see attached, it looks like the option to manually set a start date constraint was not selectable, All of the options were mashed together.
I fixed it. It's actually an issue with planner. I updated the two packages to 0.14.6.
Please implement fix!
Please see attached, it looks like the option to manually set a start date constraint was not selectable, All of the options were mashed together.
I fixed it. It's actually an issue with planner. I updated the two packages to 0.14.6.
Please implement fix!
- Attachments
-
- capture9773.png
- (53.9 KiB) Downloaded 992 times
-
- capture15559.png
- (16.29 KiB) Downloaded 998 times
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
Hello!bigpup wrote:Graphic driver pets are now here for testing.
See this topic post:
http://www.murga-linux.com/puppy/viewto ... 424#806424
I tested all of drivers listed in the dropbox folder about kernel 3.14.20...
This folder: https://www.dropbox.com/sh/zbantwc3o186 ... K3aJa?dl=0
nvidia-glx-340.46-k3.14.20_PAE.pet --> result in a black screen and do nothing.
nvidia-glx-340.46-k3.14.20_noPAE.pet --> i can't install it. I think this is not my installed version.
nvidia-glx-340.46-k3.14.20.pet --> when reboot, the desktop appear in a low resolution and a error saying that the nvidia driver is not currently user, restart x to enable it (or something like that, sorry). When i press the button "Restart X", the x restart but with the same message and low resolutions. If i run the xorgwizzard and select Nvidia driver and my resoluttion (1366x768)... the black screen again
any suggestions?
hi luiscuadrado123
you need to check on the nvidia website to see what driver you need http://www.nvidia.com/Download/index.aspx?lang=en-us
you need to check on the nvidia website to see what driver you need http://www.nvidia.com/Download/index.aspx?lang=en-us
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
Yes i did!666philb wrote:hi luiscuadrado123
you need to check on the nvidia website to see what driver you need http://www.nvidia.com/Download/index.aspx?lang=en-us
the current driver for my Geforce 330M is the 340.46!!
i tested with the getnvidia.pet program with a few olds drivers (they support my card), and same result
In precise puppy (LxPup) the nvidia driver work great! i have installed the 319.32 version of nvidia.. i tried to find this version on the list of "old versions" on nvidia website, but i didn't found.
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
sorry for double post..luiscuadrado123 wrote:Yes i did!666philb wrote:hi luiscuadrado123
you need to check on the nvidia website to see what driver you need http://www.nvidia.com/Download/index.aspx?lang=en-us
the current driver for my Geforce 330M is the 340.46!!
i tested with the getnvidia.pet program with a few olds drivers (they support my card), and same result
In precise puppy (LxPup) the nvidia driver work great! i have installed the 319.32 version of nvidia.. i tried to find this version on the list of "old versions" on nvidia website, but i didn't found.
i will try the 304.123 driver listed on the dropbox folder....
EDIT: the same result... black screen
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
-
- Posts: 75
- Joined: Sat 10 May 2008, 09:40
same issue here, mine should be the 304.123, but not working, black screen, tried all to be sure.. for lack of being about to revert to a working driver trying all options in xorgwizard, I rebooted to ram, deleted savefileluiscuadrado123 wrote:sorry for double post..luiscuadrado123 wrote:Yes i did!666philb wrote:hi luiscuadrado123
you need to check on the nvidia website to see what driver you need http://www.nvidia.com/Download/index.aspx?lang=en-us
the current driver for my Geforce 330M is the 340.46!!
i tested with the getnvidia.pet program with a few olds drivers (they support my card), and same result
In precise puppy (LxPup) the nvidia driver work great! i have installed the 319.32 version of nvidia.. i tried to find this version on the list of "old versions" on nvidia website, but i didn't found.
i will try the 304.123 driver listed on the dropbox folder....
EDIT: the same result... black screen
tried again clean/new savefile created (and again, and again.... )
i ran nvidia-xconfig from command line as per the nvidia control panel
it says to remove nv driver, not sure how, i tried to use the modesetting
driver instead of nv, and reinstall the nvidia driver, well that's not how,
as same black screen.. I'm likely missing something real easy..
I should know to get this working
can someone straighten me out? thanks
try this
install the driver (you may need to create a savefile first) ... then try menu>>>bootmanager and then the modules tab, click the blacklist button and blacklist nouveau. then reboot
install the driver (you may need to create a savefile first) ... then try menu>>>bootmanager and then the modules tab, click the blacklist button and blacklist nouveau. then reboot
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
first of all, thanks for your help.666philb wrote:try this
install the driver (you may need to create a savefile first) ... then try menu>>>bootmanager and then the modules tab, click the blacklist button and blacklist nouveau. then reboot
I did what you say, but nothing new happens the black screem again
When you run Xorgwizard to select the Nvidia driver.luiscuadrado123 wrote:first of all, thanks for your help.666philb wrote:try this
install the driver (you may need to create a savefile first) ... then try menu>>>bootmanager and then the modules tab, click the blacklist button and blacklist nouveau. then reboot
I did what you say, but nothing new happens the black screem again
After running the test it goes to black screen and never does anything else?
Like a lockup?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
The included web-browser Palemoon does not run for me, it exits with the message "Illegal instruction" when ran from terminal. I have an AMD Athlon XP 2200+ processor, which lacks the SSE2 instruction set, this looks like the problem. I can always download a different browser though... (but the version of Iron in quickpet does not work, for the same reasons)
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
after select the resolutions and press on "Test X now"... the message for test appear with the "ok" button. I can read correctly the text... but when i press enter (to do OK) the black screem appear and nothing more happens. I tried to press CONTROL+ALT+Backspace (just like the tutorial say) but the same problem.bigpup wrote:When you run Xorgwizard to select the Nvidia driver.luiscuadrado123 wrote:first of all, thanks for your help.666philb wrote:try this
install the driver (you may need to create a savefile first) ... then try menu>>>bootmanager and then the modules tab, click the blacklist button and blacklist nouveau. then reboot
I did what you say, but nothing new happens the black screem again
After running the test it goes to black screen and never does anything else?
Like a lockup?
luiscuadrado123,
Thanks for info.
That is a clue.
A start over fresh is the easiest thing to do.
If frugal install, make a save file or directory(folder) and boot using it.
Make sure downloading and installing the Nvidia driver you need is the first thing you try.
Make sure you are getting the right driver package for the version of Tahrpup you have. (PAE or Non- PAE)
One possible cause of problem could be you have more than one version of the Nvidia driver installed.
Xorgwizard gets confused if it finds more than one driver labeled Nvidia.
Look in PPM uninstall list make sure only one Nvidia driver package is listed.
Thanks for info.
That is a clue.
A start over fresh is the easiest thing to do.
If frugal install, make a save file or directory(folder) and boot using it.
Make sure downloading and installing the Nvidia driver you need is the first thing you try.
Make sure you are getting the right driver package for the version of Tahrpup you have. (PAE or Non- PAE)
One possible cause of problem could be you have more than one version of the Nvidia driver installed.
Xorgwizard gets confused if it finds more than one driver labeled Nvidia.
Look in PPM uninstall list make sure only one Nvidia driver package is listed.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Intel driver?
hi
i'm not newbie in puppy or even in linux
but till now , as puppy detect all of my hardwares , i dont need any driver kind things!
now the problem
my netbook (eeepc 701 4g) has an intel gma900 Graphic chipset
but in xorgwizard there is only one (unaccelerated) choice
. this will run puppy
but vlc dont play any video.
i try to install x86_video_intel_2.15.pet
after that i go to xorgwizard , yet that only unaccelerated choice , in the next pages ( where there is a fallback button) fallback , now in this list there is an intel choice , select and ... so on
then movies under 640*480 work!
----- but higher resoulations only have a black screen and even player dont work (its like nothing!)
----
keep in mind that precise puppy (5.7.1) works fine , even with dvd playback!
is there any way to install intel drivers?
is there any driver?
or maybe downgrade to precise?
-------
-------
thank you
i'm not newbie in puppy or even in linux
but till now , as puppy detect all of my hardwares , i dont need any driver kind things!
now the problem
my netbook (eeepc 701 4g) has an intel gma900 Graphic chipset
but in xorgwizard there is only one (unaccelerated) choice
. this will run puppy
but vlc dont play any video.
i try to install x86_video_intel_2.15.pet
after that i go to xorgwizard , yet that only unaccelerated choice , in the next pages ( where there is a fallback button) fallback , now in this list there is an intel choice , select and ... so on
then movies under 640*480 work!
----- but higher resoulations only have a black screen and even player dont work (its like nothing!)
----
keep in mind that precise puppy (5.7.1) works fine , even with dvd playback!
is there any way to install intel drivers?
is there any driver?
or maybe downgrade to precise?
-------
-------
thank you
In Puppy Icon Switcher (menu->Desktop->Desktop icon switcher)
There is a button to click labeled "More Themes"
It opens the browser to this location:
http://www.murga-linux.com/puppy/viewtopic.php?t=30075
This does not seem to be a location to get icons, but a place for GTK themes.
Icon themes are located here:
http://www.murga-linux.com/puppy/viewtopic.php?t=31059
There is a button to click labeled "More Themes"
It opens the browser to this location:
http://www.murga-linux.com/puppy/viewtopic.php?t=30075
This does not seem to be a location to get icons, but a place for GTK themes.
Icon themes are located here:
http://www.murga-linux.com/puppy/viewtopic.php?t=31059
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)