tahrpup 6.0.5 CE
666philb,
You need to read this about Pale Moon.
http://forum.palemoon.org/viewtopic.php?f=37&t=6655
You need to read this about Pale Moon.
http://forum.palemoon.org/viewtopic.php?f=37&t=6655
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
i resolved the issue a few weeks ago ... moonchild has kindly changed the licensing so that free open source distros such as puppy are able to use palemoon.bigpup wrote:666philb,
You need to read this about Pale Moon.
http://forum.palemoon.org/viewtopic.php?f=37&t=6655
Yes, with the changes I've made in the licensing, it is now much more open to free community-driven operating systems and distros than it was before, and you're all fine including Pale Moon this way in any derivative of Tahrpup, as long as you stick to the general rule of thumb you can't alter the browser in any significant way when including it with official branding.
I support all your efforts!
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
I figured you had, but just was not sure after seeing this post on the PaleMoon forum.
It is good that they are willing to work with you and others.
All seem to be after the same good results for everyone.
Thanks!
It is good that they are willing to work with you and others.
All seem to be after the same good results for everyone.
Thanks!
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
remember screen brightness
here's a .pet that remembers the screen brightness setting on laptops over reboots.
it works fine for me, but if others could test if it works for them and let me know..... i can then add it to the bugfixes.
it works fine for me, but if others could test if it works for them and let me know..... i can then add it to the bugfixes.
- Attachments
-
- remember_screen_brightness.pet
- (11.27 KiB) Downloaded 209 times
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
I'd been using regular Ubuntu since 2007 but my elderly HP has been creaking under the load of late. I have been using LXLE as an alternative, but installed TahrPup (frugal install) on a whim and dang! that little sucker's fast.
Of course, once I had it up and running I had to tinker...tried to install LXDE through its quickpet, since it seemed a bit more polished than JWM...and now when I boot Puppy it rolls a distorted, unreadable screen.
Presumably if I boot LXLE or the live Tahrpup USB there's something I can do to un-mess myself, but I don't know what that might be. (Apologies if this might better have been posted elsewhere on the forum)
Of course, once I had it up and running I had to tinker...tried to install LXDE through its quickpet, since it seemed a bit more polished than JWM...and now when I boot Puppy it rolls a distorted, unreadable screen.
Presumably if I boot LXLE or the live Tahrpup USB there's something I can do to un-mess myself, but I don't know what that might be. (Apologies if this might better have been posted elsewhere on the forum)
I have tried most of the window managers with different versions of puppy, but JWM is the one I am now using. At first it does not seem to have the options that other WM have, but all the options I am looking for are included.
First look at http://joewing.net/projects/jwm/config.shtml
Then, if you cannot find a way to impliment an option, post it and someone will answer your request.
First look at http://joewing.net/projects/jwm/config.shtml
Then, if you cannot find a way to impliment an option, post it and someone will answer your request.
To try Tahrpup with LXDE it might be easier to try LxPupTahr....chromie wrote:I'd been using regular Ubuntu since 2007 but my elderly HP has been creaking under the load of late. I have been using LXLE as an alternative, but installed TahrPup (frugal install) on a whim and dang! that little sucker's fast.
Of course, once I had it up and running I had to tinker...tried to install LXDE through its quickpet, since it seemed a bit more polished than JWM...and now when I boot Puppy it rolls a distorted, unreadable screen.
Presumably if I boot LXLE or the live Tahrpup USB there's something I can do to un-mess myself, but I don't know what that might be. (Apologies if this might better have been posted elsewhere on the forum)
http://murga-linux.com/puppy/viewtopic. ... 071#730071
and
http://murga-linux.com/puppy/viewtopic. ... 415#806415
- Attachments
-
- Screenshot_2014-03-15_195644.png
- (189.06 KiB) Downloaded 803 times
i'm preparing a service pack for tahrpup ...... when it's ready users should get a prompt about it when they open the PPM.
it will contain all the bugfixes to date and the bugfixes button in quickpet will be reset.
other updates include...
ROX-Filer (fixes quiet copy option & proc bug)
Pburn latest ... (this needs thoroughly testing if it's to go in)
any other suggestions?
here's a link to a pet containing pburn&rox updates to test... rox seems fine, but i can't test pburn as i've no cddrive, and it will need testing if it's to go into the service pack.
https://www.dropbox.com/s/6nuqa0040yihd ... s.pet?dl=0
it will contain all the bugfixes to date and the bugfixes button in quickpet will be reset.
other updates include...
ROX-Filer (fixes quiet copy option & proc bug)
Pburn latest ... (this needs thoroughly testing if it's to go in)
any other suggestions?
here's a link to a pet containing pburn&rox updates to test... rox seems fine, but i can't test pburn as i've no cddrive, and it will need testing if it's to go into the service pack.
https://www.dropbox.com/s/6nuqa0040yihd ... s.pet?dl=0
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Other suggestions...
Well, my TahrPup's screen blinks every +/- 10 seconds...
Is it just me ? Or the X ?
Everything else works fine on it.
I say "blink", but it's rather like a quick, TV-like, "rescan" of the screen.
It's tolerable, but annoying.
For the record, my computer is an AMD Sempron 3100+ box, from
+/- 2007. I use no graphics card at the moment, just the graphic chip
that's factory-soldered on the motherboard. My Sony monitor has
1280x1024 resolution.
Thanks in advance.
musher0
Well, my TahrPup's screen blinks every +/- 10 seconds...
Is it just me ? Or the X ?
Everything else works fine on it.
I say "blink", but it's rather like a quick, TV-like, "rescan" of the screen.
It's tolerable, but annoying.
For the record, my computer is an AMD Sempron 3100+ box, from
+/- 2007. I use no graphics card at the moment, just the graphic chip
that's factory-soldered on the motherboard. My Sony monitor has
1280x1024 resolution.
Thanks in advance.
musher0
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
hi musher0,
not happening for me on the 6 computers i've tried tahrpup on and no reports yet of anyone else.
possibly kernel related ... have you tried older & newer ones ?
not happening for me on the 6 computers i've tried tahrpup on and no reports yet of anyone else.
possibly kernel related ... have you tried older & newer ones ?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
new backgrounds.
- Attachments
-
- tahrpup71r.jpg
- https://www.mediafire.com/folder/x4v77bi1p58ox/puppy2013
- (24.62 KiB) Downloaded 1398 times
-
- tahrpup71a.jpg
- https://www.mediafire.com/folder/x4v77bi1p58ox/puppy2013
- (22.08 KiB) Downloaded 1403 times
-
- tahrpup19s.jpg
- https://www.mediafire.com/folder/x4v77bi1p58ox/puppy2013
- (19.64 KiB) Downloaded 1399 times
-
- tahrpup19.jpg
- https://www.mediafire.com/folder/x4v77bi1p58ox/puppy2013
- (21.49 KiB) Downloaded 1393 times
-
- tahrpup16.jpg
- https://www.mediafire.com/folder/x4v77bi1p58ox/puppy2013
- (27.11 KiB) Downloaded 1388 times
What graphics driver is being used?musher0 wrote: Well, my TahrPup's screen blinks every +/- 10 seconds...
Is it just me ? Or the X ?
I say "blink", but it's rather like a quick, TV-like, "rescan" of the screen.
I use no graphics card at the moment, just the graphic chip
that's factory-soldered on the motherboard. My Sony monitor has
1280x1024 resolution.
Is 1280X1024 the native resolution?
Are you using the native refresh rate?
Example:
I am using a flat screen TV.
The native resolution is 1280X768 but I have to use a refresh rate of 50
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Thanks for the suggestion, James. I've done a frugal install with LXPupTahr, and it's working beautifully. It even detected my external monitor at the correct resolution without fiddling, which TahrPup had resolutely refused to do. Very nice indeed, so kudoes to Peebee and everyone else who had a hand in it.James C wrote:
To try Tahrpup with LXDE it might be easier to try LxPupTahr....
http://murga-linux.com/puppy/viewtopic. ... 071#730071
and
http://murga-linux.com/puppy/viewtopic. ... 415#806415
I'd still like to get my TahrPup working again, mind you, and play around with JWM some more.
Hardware requirements
What are the hardware requirements for this new pup? I have an old computer with only 384mb RAM and 1.7 processor. Also, I connect to the internet with a 3G cell modem via dialup (pupdial). Will it be of any use to me?
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
wacom kernel driver wacom.ko for kernel 3.17.4
Hi,
compiled on Tahr-3.0-PAE k 3.17.4
as i did not have found it inside the distro ...
here is the wacom kernel driver wacom.ko version 0.25.0
Cheers, Charlie
ps: the latest at now (version 0.27.0) Xorg driver may be downloaded here:
http://murga-linux.com/puppy/viewtopic. ... 360#815360
compiled on Tahr-3.0-PAE k 3.17.4
as i did not have found it inside the distro ...
here is the wacom kernel driver wacom.ko version 0.25.0
Cheers, Charlie
ps: the latest at now (version 0.27.0) Xorg driver may be downloaded here:
http://murga-linux.com/puppy/viewtopic. ... 360#815360
- Attachments
-
- input-wacom-0.25.0_k3.17.4.pet
- kernel driver wacom.ko version 0.25.0
- (27.56 KiB) Downloaded 206 times
thanks for the wallpapers futwerk, i've added a few to the service pack.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Re: Hardware requirements
i would probably work but you'ld be better off with an older lighter puppy on thatnic007 wrote:What are the hardware requirements for this new pup? I have an old computer with only 384mb RAM and 1.7 processor. Also, I connect to the internet with a 3G cell modem via dialup (pupdial). Will it be of any use to me?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Re: wacom kernel driver wacom.ko for kernel 3.17.4
is this PAE or noPAE ? (i'll upload it to the repo)charlie6 wrote:Hi,
compiled on Tahr-3.0-PAE k 3.17.4
as i did not have found it inside the distro ...
here is the wacom kernel driver wacom.ko version 0.25.0
Cheers, Charlie
ps: the latest at now (version 0.27.0) Xorg driver may be downloaded here:
http://murga-linux.com/puppy/viewtopic. ... 360#815360
thanks
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
so here's the service_pack to test ...."url removed as testing complete"
if no one reports anything bad i'll be adding it in a few days ....
just in time for christmas
if no one reports anything bad i'll be adding it in a few days ....
just in time for christmas
Last edited by 666philb on Fri 19 Dec 2014, 22:00, edited 1 time in total.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Hmmm. Pardon me if this is a dumb question, but would deleting my savefiles do the job? I should think that would take me into the equivalent of a first-time startup, no?chromie wrote:Thanks for the suggestion, James. I've done a frugal install with LXPupTahr, and it's working beautifully. It even detected my external monitor at the correct resolution without fiddling, which TahrPup had resolutely refused to do. Very nice indeed, so kudoes to Peebee and everyone else who had a hand in it.James C wrote:
To try Tahrpup with LXDE it might be easier to try LxPupTahr....
http://murga-linux.com/puppy/viewtopic. ... 071#730071
and
http://murga-linux.com/puppy/viewtopic. ... 415#806415
I'd still like to get my TahrPup working again, mind you, and play around with JWM some more.