LxPup : a Puppy with LXDE as its desktop environment
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
Fujitsu-Siemens video driver
Hi to peebee,
You've been helpful recently, I wondered if you
can also suggest on the following:
LxPup 14.12 on a stick, doesn't load up on
this notebook the only one of my four pcs;
Fujitsu-Siemens Amilo L7300 series c2004.
The initial flash screen shows, then loading kernel,
then black screen and hangs - nothing more.
Reading user forums show this is typically lack of
correct video driver in the kernel.
From Google, table data of the time shows this:
Fujitsu-Siemens VGA Video Drivers 6.14.10.0188 2004-11-02 XP
Is there provision for adding this driver to the kernel?
Some time ago, XP was replaced by installed host distro
Zorin 9 OS Lite, so I know the F-S is amenable to using Linux.
Thanks in advance,
Regards.
You've been helpful recently, I wondered if you
can also suggest on the following:
LxPup 14.12 on a stick, doesn't load up on
this notebook the only one of my four pcs;
Fujitsu-Siemens Amilo L7300 series c2004.
The initial flash screen shows, then loading kernel,
then black screen and hangs - nothing more.
Reading user forums show this is typically lack of
correct video driver in the kernel.
From Google, table data of the time shows this:
Fujitsu-Siemens VGA Video Drivers 6.14.10.0188 2004-11-02 XP
Is there provision for adding this driver to the kernel?
Some time ago, XP was replaced by installed host distro
Zorin 9 OS Lite, so I know the F-S is amenable to using Linux.
Thanks in advance,
Regards.
Peebee, so you're using an old version of lxpup ? could you elaborate ? looks weird xD
Also, I installed a package and didn't save my session at shutdown (no automatic save) but when I rebooted it was still here.
Same thing happened some days ago when I removed the USB stick to avoid the automatic save at shutdown (and then I did fsck and it was clean).
So what could be causing that ? Should I ask somewhere else ?
Also, I installed a package and didn't save my session at shutdown (no automatic save) but when I rebooted it was still here.
Same thing happened some days ago when I removed the USB stick to avoid the automatic save at shutdown (and then I did fsck and it was clean).
So what could be causing that ? Should I ask somewhere else ?
Main puppy used : LxPup tahr.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=97623]Multiple package installer/remover.[/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=97623]Multiple package installer/remover.[/url]
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
Graphics problem as discussed
To peebee:
Quote:
Hi there
You need to find more details of what drivers are needed for your hardware.
What I suggest is that you boot with settings:
pfix=ram,nox
(No, this command in Precise 5.7.1; puppy pfix=nox,ram)
which should boot to the terminal
issue the xorgwizard command and see which drivers are offered (make a note)
If multiple drivers are offered try one of the alternatives
Also issue the lspci command and note the details of your graphics that gives you -
probably on a line starting "VGA compatible controller:"
If no joy then search the forum using the Wellminded search engine at:
http://puppylinux.org/wikka/PuppyLinuxSearchEngine
with your graphics details
If you're still in problems, probably better to post a query on one of the graphics
problem threads rather than the LxPup one -
be sure to give as full details of your laptop and what software as possible.
Hope that helps
Cheers
peebee
------------------------------------------------------------------
Quote:
Hi there
You need to find more details of what drivers are needed for your hardware.
What I suggest is that you boot with settings:
pfix=ram,nox
(No, this command in Precise 5.7.1; puppy pfix=nox,ram)
which should boot to the terminal
issue the xorgwizard command and see which drivers are offered (make a note)
If multiple drivers are offered try one of the alternatives
Also issue the lspci command and note the details of your graphics that gives you -
probably on a line starting "VGA compatible controller:"
If no joy then search the forum using the Wellminded search engine at:
http://puppylinux.org/wikka/PuppyLinuxSearchEngine
with your graphics details
If you're still in problems, probably better to post a query on one of the graphics
problem threads rather than the LxPup one -
be sure to give as full details of your laptop and what software as possible.
Hope that helps
Cheers
peebee
------------------------------------------------------------------
Last edited by Rodney Byne on Wed 04 Feb 2015, 14:34, edited 1 time in total.
Hi Rodney Byne
You need to run LxPupPrecise-retro on this laptop. see http://lx-pup.weebly.com/upup-precise.html
Cheers
peebee
See below for clarification from 666philb.[ 33.143] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
You need to run LxPupPrecise-retro on this laptop. see http://lx-pup.weebly.com/upup-precise.html
Cheers
peebee
Last edited by peebee on Wed 04 Feb 2015, 15:09, edited 2 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
hi peebee,
openchrome_drv.so is in tahrpup and so is the via kernel module but for some reason via cards aren't working.
it could be missing firmware... or another missing kernel config
openchrome_drv.so is in tahrpup and so is the via kernel module but for some reason via cards aren't working.
it could be missing firmware... or another missing kernel config
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Thanks 666philb - apologies that I missed the file when I first looked for it.666philb wrote:hi peebee,
openchrome_drv.so is in tahrpup and so is the via kernel module but for some reason via cards aren't working.
it could be missing firmware... or another missing kernel config
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup-15.02.1-s-pae.iso & nopae.iso
A new Slacko6Beta2 based version of LxPup is available from:
LxPup-15.02.2-s-pae.iso
This is a Slackware14.1 based puppy.
The main changes from the last pae version (LxPup-14.10.00-s-pae.iso) are:
The LxPupTahr versions also available - see below.
Including ppm_auto is a bit of a risk as mavrothal has only just released version 1.9, but I think its worth exposing version 1.9 to a wider audience. There may be further updates.
Cheers
peebee
LxPup-15.02.2-s-pae.iso
This is a Slackware14.1 based puppy.
The main changes from the last pae version (LxPup-14.10.00-s-pae.iso) are:
- kernel 3.17.7-pae-updated from 666philb
openssl 1.0.1k
libstardust-150130
pfilesearch-2.0.pet
pfind-6.1.pet
ppm_auto-1.9_0402.pet
Pup-SysInfo-2.5.2.pet
YASSM-2.7.pet
shortcut creation and editing
keyboard volume controls
The LxPupTahr versions also available - see below.
Including ppm_auto is a bit of a risk as mavrothal has only just released version 1.9, but I think its worth exposing version 1.9 to a wider audience. There may be further updates.
Cheers
peebee
- Attachments
-
- Screenshot.png
- (179.68 KiB) Downloaded 1090 times
Last edited by peebee on Sat 07 Feb 2015, 16:55, edited 3 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
LxPupPrecise14.12.1-Retro
To peebee,
Re previous posts for no graphics on Fujitsu-Siemens Amilo L7300 series
notebook, am pleased to say LxPupPrecise14.12.1-Retro works normally.
Thanks also to 666philb,
Regards, RB
Re previous posts for no graphics on Fujitsu-Siemens Amilo L7300 series
notebook, am pleased to say LxPupPrecise14.12.1-Retro works normally.
Thanks also to 666philb,
Regards, RB
LxPupTahr-15.02
LxPupTahr-15.02 - based on Tahr Pup 6.0.2CE - now available from:
http://lx-pup.weebly.com/upup-tahr.html
Includes one update - ppm-auto-1.9.2
Other changes are as described above for LxPup 15.02 Slacko flavour.
PAE & NOPAE Kernel 3.14.20 editions as per Tahr Pup
Cheers
peebee
http://lx-pup.weebly.com/upup-tahr.html
Includes one update - ppm-auto-1.9.2
Other changes are as described above for LxPup 15.02 Slacko flavour.
PAE & NOPAE Kernel 3.14.20 editions as per Tahr Pup
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: LxPupTahr-15.02
Posting from 15.02 non-PAE, updated from 14.12.2 on a frugal Grub4Dos install on the Fujitsu S6510 laptop. 2.4GHz core 2 duo, 2Gb RAM, iwlwifi (5300 chip) wireless, intel 'Cantiga' video (i915 driver). No hitches. Deliberately didn't clean up the savefile first. Connection, sound, panel, apps in savefile all came through unscathed. Intel video driver and MESA used, direct rendering, no intel drm setup errors, glxgears at a solid 1375 FPS. Also did a pfix=ram boot just to check. Boringly normalpeebee wrote:LxPupTahr-15.02 - based on Tahr Pup 6.0.2CE - now available
Noted that there is still a (I assume) spurious directory, hicolcor, in /usr/share/icons. Pretty sure the scalable icons therein belong in hicolor there but I don't know if that is a TahrPup or LxTahrPup thing.
As an aside, I'm coming up on 3 weeks running LxPupUnicorn 15.1.01 as the 'daily driver' on one of the Bay-Trail boxes at the farm with no squawks or requests from the users. That's good.
Thanks,
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
LxPupUnicorn-15.02
LxPupUnicorn-15.02 is now available.....Marv wrote:As an aside, I'm coming up on 3 weeks running LxPupUnicorn 15.1.01 as the 'daily driver' on one of the Bay-Trail boxes at the farm with no squawks or requests from the users. That's good. Thanks,
Built in the same way as before by adding TahrPup applications onto the UnicornPup6.0 base and then adding the LxPup components.
Updated to use TahrPup6.0.2CE applications.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LXPUP 12.12
in order to post french speaking, could you change the Title of topic LXPUP 12.12 in forum francophone to LXPUP only. Versions are so many than that will allow not creating a new topic at each version.
J'ai des infos à donner au sujet de LXPUP Qt, but many of my colleagues badly understand english ( so do i, but less then they do)
Sankore (qt-app) on test bench in french forum.
I am running it in LXPUP QT
J'ai des infos à donner au sujet de LXPUP Qt, but many of my colleagues badly understand english ( so do i, but less then they do)
Sankore (qt-app) on test bench in french forum.
I am running it in LXPUP QT
- Attachments
-
- sfs.jpg
- Sankore load on the fly.
- (57.11 KiB) Downloaded 970 times
Re: LXPUP 12.12
Hi PeloPelo wrote:in order to post french speaking, could you change the Title of topic LXPUP 12.12 in forum francophone to LXPUP only.
That thread belongs to jejy69 and only he can edit the 1st post and therefore the title of the thread.
You could try to send him a pm or you could ask a moderator to change it.....
Sorry I can't help any more, but thats how the forum works.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
YouTube video
Been meaning to do this for some time.....just got my head around the technology....
A YouTube Introduction to LxPup15.02 is now available 21mins long
A YouTube Introduction to LxPup15.02 is now available 21mins long
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup : a Puppy with LXDE as its desktop environment
I'll have to give LxPup a try
- Attachments
-
- LxPupintro.jpg
- (57.48 KiB) Downloaded 792 times
LxPup : a Puppy with LXDE as its desktop environment
Manual frugal install to a 16gb flash drive, pc is an Asus Eee PC 701SD.
video-info-glx 1.5.1 Sun 15 Feb 2015 on LxPup 15.02 Linux 3.4.94 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.14.3
dimensions: 640x480 pixels (169x126 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.1.7
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @630 MHz
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
I have the netbook connected to an external monitor but can't set it
to a higher resolution, easier to see just the same.
video-info-glx 1.5.1 Sun 15 Feb 2015 on LxPup 15.02 Linux 3.4.94 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.14.3
dimensions: 640x480 pixels (169x126 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.1.7
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @630 MHz
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
I have the netbook connected to an external monitor but can't set it
to a higher resolution, easier to see just the same.
- Attachments
-
- Screenshot.jpg
- (76.28 KiB) Downloaded 2960 times
LxPup : a Puppy with LXDE as its desktop environment
I did another install to a 32gb SDHC card:
video-info-glx 1.5.1 Mon 16 Feb 2015 on LxPup 15.02 Linux 3.4.94 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.14.3
dimensions: 800x480 pixels (169x126 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.1.7
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @630 MHz
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Compiled mplayer-checkout-snapshot.tar.bz2 (took an hour and a half),
loaded qt4-4.8.5.sfs (from fatdog64), added scabz's smplayer,smtube,and
cacertificates pets.
Dillo-3.4.0.1 works great on this netbook, firefox not so much.
Connected decent speakers to the headphone jack, this Eee PC 701SD rocks
now
Thanks for LxPup!
EDIT: Typo, should read Dillo-3.0.4.1
video-info-glx 1.5.1 Mon 16 Feb 2015 on LxPup 15.02 Linux 3.4.94 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.14.3
dimensions: 800x480 pixels (169x126 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 9.1.7
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @630 MHz
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Compiled mplayer-checkout-snapshot.tar.bz2 (took an hour and a half),
loaded qt4-4.8.5.sfs (from fatdog64), added scabz's smplayer,smtube,and
cacertificates pets.
Dillo-3.4.0.1 works great on this netbook, firefox not so much.
Connected decent speakers to the headphone jack, this Eee PC 701SD rocks
now
Thanks for LxPup!
EDIT: Typo, should read Dillo-3.0.4.1
- Attachments
-
- Screenshot.jpg
- (49.52 KiB) Downloaded 1893 times
-
- Screenshot2.jpg
- (46.53 KiB) Downloaded 1693 times
using my lxpup 14.02 save on the newest lxpup, it asked me if i wanted to copy the sfs in the usb stick, so I said yes and then it bugged
I had no firewall set up and custom programs on startup
So I deleted these sfs and the bug was gone.
Can't say more though
I had no firewall set up and custom programs on startup
So I deleted these sfs and the bug was gone.
Can't say more though
Main puppy used : LxPup tahr.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=97623]Multiple package installer/remover.[/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=97623]Multiple package installer/remover.[/url]
- Subito Piano
- Posts: 731
- Joined: Mon 28 May 2007, 03:12
- Location: UPSTATE New York
- Contact:
Rednotebook
Hi! Excellent work but rednotebook will not function as posted here. Launching in terminal gives
...although rednotebook does work in tahrpup 6.0.2. I did install the pet package python-webkit_1.1.8, but that dd not help.
Not sure where the problem lies....???
[EDIT] I downloaded and ran TahrPup and installed rednotebook -- it ran fine. Then i downloaded the LxPup sfs fie and loaded it "on the fly," then ran the lxpup pet as directed. It restarted the wm automatically, then rednotebook would not start. Terminal gives the following output:
Similar issues in the LxPup Slacko:
...but i can't find the python YAML package thru the package manager.
Code: Select all
Webkit was not found. It can be found in a package with the name python-webkit or pywebkitgtk
Not sure where the problem lies....???
[EDIT] I downloaded and ran TahrPup and installed rednotebook -- it ran fine. Then i downloaded the LxPup sfs fie and loaded it "on the fly," then ran the lxpup pet as directed. It restarted the wm automatically, then rednotebook would not start. Terminal gives the following output:
Code: Select all
root# rednotebook
INFO chardet not found. 'utf-8' encoding will be assumed
INFO Writing log to file "/root/.rednotebook/rednotebook.log"
INFO MathJax location: http://cdn.mathjax.org/mathjax/latest/MathJax.js
INFO chardet not found. 'utf-8' encoding will be assumed
INFO Running in portable mode: False
INFO First Start: False
INFO RedNotebook version: 1.4.0
INFO System info: machine: i686, platform: Linux-3.14.20-i686-athlon-with-glibc2.4, processor: athlon, python_version: 2.7.6, release: 3.14.20, system: Linux, GTK version: (2, 24, 23), PyGTK version: (2, 24, 0), Yaml version: 3.10
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyDrive'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyMount'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyShadowMount'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyVolume'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyVolumeMonitor'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GProxyVolumeMonitorUDisks2'.
self.builder.add_from_file(self.gladefile)
(rednotebook:1916): GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-native-volume-monitor. Expected type is GNativeVolumeMonitor.
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GDaemonVfs'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GDaemonVolumeMonitor'.
self.builder.add_from_file(self.gladefile)
(rednotebook:1916): GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: cannot add interface type 'GLoadableIcon' to type 'GVfsIcon', since type 'GVfsIcon' already conforms to interface
self.builder.add_from_file(self.gladefile)
(rednotebook:1916): GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-vfs. Expected type is GVfs.
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GVfsUriMapper'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GVfsUriMapperSmb'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GVfsUriMapperHttp'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'GVfsUriMapperAfp'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupClientMonitor'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupClientDevice'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupVolumeMonitor'.
self.builder.add_from_file(self.gladefile)
(rednotebook:1916): GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupClientVolume'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupMount'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: Two different plugins tried to register 'PupClientDrive'.
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: invalid cast from 'GDaemonVfs' to '<invalid>'
self.builder.add_from_file(self.gladefile)
Error creating proxy: Error calling StartServiceByName for org.gtk.Private.UDisks2VolumeMonitor: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 127 (g-dbus-error-quark, 25)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: g_object_new: assertion 'G_TYPE_IS_OBJECT (object_type)' failed
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: invalid (NULL) pointer instance
self.builder.add_from_file(self.gladefile)
/usr/share/rednotebook/rednotebook/gui/main_window.py:63: Warning: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
self.builder.add_from_file(self.gladefile)
Segmentation fault
Code: Select all
# rednotebook
/usr/bin/python: /lib/libcrypto.so.0.9.8: no version information available (required by /usr/bin/python)
/usr/bin/python: /lib/libssl.so.0.9.8: no version information available (required by /usr/bin/python)
** (process:24713): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
** (process:24713): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
** (process:24713): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
INFO chardet not found. 'utf-8' encoding will be assumed
2015-02-16 19:43:59,817 INFO Writing log to file "/root/.rednotebook/rednotebook.log"
2015-02-16 19:43:59,818 INFO System encoding: UTF-8
2015-02-16 19:43:59,818 INFO Language code: en_US
2015-02-16 19:43:59,829 ERROR PyYAML not found. Please install python-yaml or PyYAML
Re: Rednotebook
Hi - this appears to be a very large (>100MB) and complicated application which installs all sorts of dependencies and libraries. I'm not even really clear what the application does (or why it needs to be so large).Subito Piano wrote:but rednotebook will not function
It doesn't seem to have been supported on Slackware since version 13.37 - see http://pkgs.org/search/rednotebook - LxPup current is based on Slackware 14.1 components.
If it works on TahrPup then it may be best to keep running it there.....
Sorry can't be more help on this one - I think it just isn't compatible with LxPup.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64