LxPup : a Puppy with LXDE as its desktop environment
ffmpeg & pBurn for LxPupTahr
Hi all,
For those of you who run LxPupTahr but don't alway check on TahrPup developments, I thought you might want to know about 666philb's pBurn and my frankenstein ffmpeg. See, http://murga-linux.com/puppy/viewtopic. ... 536#845536 and the following post.
Edit June 11, 2015: Rockedge has compiled an ffmpeg.pet for Tahrpup. You'll find his post and the link to his pet here:http://www.murga-linux.com/puppy/viewto ... 361#850361
I recommend before installing his pet that you browse to /usr/bin and check whether a symlink named ffmpeg to avconv exists. If it does, delete it before installing the pet.
mikesLr
For those of you who run LxPupTahr but don't alway check on TahrPup developments, I thought you might want to know about 666philb's pBurn and my frankenstein ffmpeg. See, http://murga-linux.com/puppy/viewtopic. ... 536#845536 and the following post.
Edit June 11, 2015: Rockedge has compiled an ffmpeg.pet for Tahrpup. You'll find his post and the link to his pet here:http://www.murga-linux.com/puppy/viewto ... 361#850361
I recommend before installing his pet that you browse to /usr/bin and check whether a symlink named ffmpeg to avconv exists. If it does, delete it before installing the pet.
mikesLr
Last edited by mikeslr on Fri 12 Jun 2015, 00:22, edited 1 time in total.
You may need to compile the amd driver for your graphics card - these proprietary drivers are kernel specific and therefore need to be compiled on your system.xstylezx wrote:I have an ati graphics card.
There are some pre-made pets at:
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... lacko14.1/
but probably not for the kernel you are using.
This thread may give you some clues on how to do this:
http://murga-linux.com/puppy/viewtopic.php?t=93949
You will need to know which kernel you are using, exactly which model of ati graphics card you have and you will need to download both the devx and kernel sources appropriate for the flavour and version of LxPup.
http://lx-pup.weebly.com/slacko60.html
I have to go through a similar process for the nvidia card on my desktop which also needs a proprietary driver.....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks. If I compiled the driver it would be great if I could do it as an sfs as when/if I decide to use this pup on another computer I wouldnt have specific graphics card driver for the one im currently using. Is there a utility around or included in this pup to make that a fairly straightforward thing?peebee wrote:You may need to compile the amd driver for your graphics card - these proprietary drivers are kernel specific and therefore need to be compiled on your system.xstylezx wrote:I have an ati graphics card.
Strange thing is LxpupTahr is accelerated using gallium it said in hardware info. Thats because slacko lxpup is using different kernel im guessing and its going with the slow vesa driver? Gallium is what carolina vanguard detects out the box also.
Hi xstylezxxstylezx wrote:Strange thing is LxpupTahr is accelerated using gallium it said in hardware info. Thats because slacko lxpup is using different kernel im guessing and its going with the slow vesa driver? Gallium is what carolina vanguard detects out the box also.
Assuming you are frugally installed??
Suggest you try replacing the kernel in LxPup with the k3.14.20 one from LxPupTahr - you just need to replace copy 2 files - vmlinuz and the zdrv file - across to your LxPup install folder and then rename the zdrv to be the same as the original LxPup name.
i.e. rename zdrv_lxtahr_15.03.sfs to zdrv_lxpup_15.03.sfs
You could then try the drivers available from:
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... ages-tahr/
amd_fglrx-14.12_K3.14.20_PAE_6.0.2.pet 20-Feb-2015 12:26 90M
amd_fglrx-14.12_K3.14.20_noPAE_6.0.2.pet 20-Feb-2015 12:25 90M
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup-15.05.2
LxPup-15.05.2 (based on Slacko-5.9.3 i.e. Slackware-14.1 components) is available from:
http://lx-pup.weebly.com/slacko60.html
The main changes from LxPup-15.03 are:
- kernel 4.0.2-32.pae-stemsee
- Firefox-38.0.1-esr
- Broadcom wl wifi driver changed to need activation
- frisbee 1.3.4
- network_tray-2.7.4 with svg icons
- openssl version 1.0.1.m
- ndiswrapper-1.59 compiled for kernel
Cheers
peebee
http://lx-pup.weebly.com/slacko60.html
The main changes from LxPup-15.03 are:
- kernel 4.0.2-32.pae-stemsee
- Firefox-38.0.1-esr
- Broadcom wl wifi driver changed to need activation
- frisbee 1.3.4
- network_tray-2.7.4 with svg icons
- openssl version 1.0.1.m
- ndiswrapper-1.59 compiled for kernel
Cheers
peebee
- Attachments
-
- lxpup-15.05.2.png
- (96.44 KiB) Downloaded 1938 times
-
- Screenshot.png
- (65.5 KiB) Downloaded 1909 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
xwin startlxdejohn009 wrote:I have been trying out de's from quickpet for about a week,tried compiz ,fbpanel+openbox,xfce ...
Now I can't go back to lxde ;'startx lxde' doesn't work nor does wmswitcher ..how do i start lxde ???Any help please
And ,peebee are you reverting back to firefox in lxpuptahr also...
john009
is the command
No - tahrpup ships with palemoon - slacko ships with firefox - I've only updated firefox in LxPup because 01micko is taking a (well deserved) break.....666philb is very active and keeps tahrpup up to date.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I kinda discovered my audio problems in Vividpup, and Tahr... (the rattles and the saturation)
I think is Retrovol, because the others pups that i tested with Alsamixer, they had no problems with the audio at all...and with older kernels than Vivid and Tahr.
I think is Retrovol, because the others pups that i tested with Alsamixer, they had no problems with the audio at all...and with older kernels than Vivid and Tahr.
Last edited by caiosama on Sun 28 Jun 2015, 01:20, edited 1 time in total.
[i]Pupjibaro 1.0.4 2015 / LxpupTahr 15.05.2 - Live USB - Dell D630
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070[/i]
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070[/i]
LxPupTahr-15.05
LxPupTahr-15.05.1 is available to download.
The main changes from LxPupTahr-15.03 are:
- TahrPup Service Pack 6.0.3 included
- Broadcom wl wifi driver now has to be activated (rcrsn51)
- Frisbee-1.3.4 update
- Network_Tray icons
Otherwise same kernel (3.14.20) and features so no pressing need to update unless you want some of the above.
Cheers
peebee
The main changes from LxPupTahr-15.03 are:
- TahrPup Service Pack 6.0.3 included
- Broadcom wl wifi driver now has to be activated (rcrsn51)
- Frisbee-1.3.4 update
- Network_Tray icons
Otherwise same kernel (3.14.20) and features so no pressing need to update unless you want some of the above.
Cheers
peebee
- Attachments
-
- capture19614.png
- (104.19 KiB) Downloaded 1514 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- clasico3124
- Posts: 15
- Joined: Sat 21 Mar 2015, 17:37
audio problem
hola,
existe un problema de audio.
mixxx no permite reproducir audio a skype.
quisiera sacar al aire una llamada skype.
hello,
audio problem.
mixxx dont allow other app use the audio.
I want to air a Skype call
existe un problema de audio.
mixxx no permite reproducir audio a skype.
quisiera sacar al aire una llamada skype.
hello,
audio problem.
mixxx dont allow other app use the audio.
I want to air a Skype call
LxPup15.06
LxPup15.06 (Slacko flavour) is available from:
http://lx-pup.weebly.com/slacko60.html
Main changes from 15.05 are:
- kernel 4.0.4-tahr-32-pae courtesy of 666philb
- openssl updated to version 1.0.1o
- mt7601 driver for Ralink usb wifi adapters added
http://lx-pup.weebly.com/slacko60.html
Main changes from 15.05 are:
- kernel 4.0.4-tahr-32-pae courtesy of 666philb
- openssl updated to version 1.0.1o
- mt7601 driver for Ralink usb wifi adapters added
- Attachments
-
- lxpup15.06.png
- (96.58 KiB) Downloaded 1222 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- clasico3124
- Posts: 15
- Joined: Sat 21 Mar 2015, 17:37
popcorn time for tahr ?
some one have .deb or .pet of cornpop time for tahr lxpup ??
thanks
thanks
- clasico3124
- Posts: 15
- Joined: Sat 21 Mar 2015, 17:37
popcorn time for tahr ?
some one have .deb or .pet of cornpop time for tahr lxpup ??
thanks
thanks
Which flavour & version of LxPup are you using?greyowl wrote:How do you activate the Broadcom wl wifi driver?
I need the Broadcom b43 Legacy driver for my wifi. Is it available OOTB with this distro?
In previous versions, the wl driver was permanently activated.
In current versions, an icon will appear on the desktop which you need to click and confirm and reboot to activate.
The desktop file can also be found in /opt/broadcom
b43-legacy is available - see /lib/modules/4.0.4-tahr_PAE-32-pae/kernel/drivers/net/wireless for LxPup-15.06 for instance
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
If I use the current version and a Live CD or Live USB thumb drive, will the reboot work for activating the wl driver. Or, does it have to be installed on the computer.peebee wrote:Which flavour & version of LxPup are you using?greyowl wrote:How do you activate the Broadcom wl wifi driver?
I need the Broadcom b43 Legacy driver for my wifi. Is it available OOTB with this distro?
In previous versions, the wl driver was permanently activated.
In current versions, an icon will appear on the desktop which you need to click and confirm and reboot to activate.
The desktop file can also be found in /opt/broadcom
b43-legacy is available - see /lib/modules/4.0.4-tahr_PAE-32-pae/kernel/drivers/net/wireless for LxPup-15.06 for instance
You have to create a savefolder/savefile on some sort of storage media....but no other "installation" is needed.....greyowl wrote:If I use the current version and a Live CD or Live USB thumb drive, will the reboot work for activating the wl driver. Or, does it have to be installed on the computer.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks for the information.
It is working well on a USB thumb drive.
It easily connected to my wireless internet.
I am not able to connect my printer.
It is a parallel port Okidata OL610e.
I tried Cups but it could not find the printer and there is not an option for a parallel port printer.
I need some help.
It is working well on a USB thumb drive.
It easily connected to my wireless internet.
I am not able to connect my printer.
It is a parallel port Okidata OL610e.
I tried Cups but it could not find the printer and there is not an option for a parallel port printer.
I need some help.