X-Tahr-2.0 with Xfce
- clasico3124
- Posts: 15
- Joined: Sat 21 Mar 2015, 17:37
chrome
actually the chrome open in x-tahr but need a script (chrome.sh) like this :
#!/bin/sh
Exec=usr/bin/google-chrome-stable --user-data-dir=/root/.config/chrome --disk-cache-size=10000000 --media-cache-size=10000000
well there are a solution.
#!/bin/sh
Exec=usr/bin/google-chrome-stable --user-data-dir=/root/.config/chrome --disk-cache-size=10000000 --media-cache-size=10000000
well there are a solution.
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
What VIA chipset is it exactly? xf86-video-openchrome-0.3.3 man page says:starhawk wrote:So, if I try and boot X-Precise 2.4 NonPAE on a particular odd system I have, it will boot to desktop after a manual run of xorgwizard to select the openchrome driver.
X-Tahr 1b2 on the same system cannot raise a desktop; its driver selection does not support the particular graphics chipset that this system has.
Can the openchrome driver from X-Precise 2.4 be recompiled to function in X-Tahr 1b2?
"openchrome driver supports the following chipsets: CLE266, KM400/KN400/KM400A/P4M800,
CN400/PM800/PN800/PM880, K8M800, CN700/VM800/P4M800Pro, CX700, P4M890, K8M890,
P4M900/VN896/CN896, VX800, VX855 and VX900."
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Sorry, thought I'd followed up here. The latest X-Pup that will boot to GUI on this hardware, IIRC, is X-Precise 2.4... a little old for what I want...
EDIT: confirmed, with the caveat that it only seems to work if you manually run xorgwizard -- the auto-run version gives me a nasty note from my monitor, that it can't display the resolution selected. (That may very well be my monitor!)
I'll do some testing with X-Precise and see how well (or not) it behaves for what I want to do. I may be able to make it work...
EDIT: confirmed, with the caveat that it only seems to work if you manually run xorgwizard -- the auto-run version gives me a nasty note from my monitor, that it can't display the resolution selected. (That may very well be my monitor!)
I'll do some testing with X-Precise and see how well (or not) it behaves for what I want to do. I may be able to make it work...
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Yes, that definitely sounds like your monitor is the problem.starhawk wrote:-- the auto-run version gives me a nasty note from my monitor, that it can't display the resolution selected. (That may very well be my monitor!)
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Have you tried Tahr puppy on this machine to see if the same thing happens?starhawk wrote:In that one case, probably -- but for the rest of it, not so much... I've tried X-Tahr on three different screens, and it won't give me a GUI on any of 'em. No signal is put out from the computer at all...
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Yep. Also TahrNOP, Azami ChromeLite (a modified VividPup), X-Slacko 3.0, and several of peebee's LxPups (specifically Slacko, Tahr, Unicorn, and Vivid). All have the same result -- no signal. openchrome is the only driver that "works" even that well -- selecting vesa or modesetting results in not only the same effect at the GUI attempt, but also that it doesn't /quite/ get back to CLI mode on CTRL+ALT+BKSP. It freezes with a blinking cursor at the top of the screen, no text. Hard power-off is the only option.
...LxPrecise and X-Precise have identical GUI behavior, BTW -- 'illegal' resolution (probably hard-coded to 1600x1200 or something) but manual xorgwizard sets it right -- but LXDE is foreign enough to me that I can't work it. Not much faster than XFCE, either, despite the 'lightweight' claims...
...check yer PM's, BTW
...LxPrecise and X-Precise have identical GUI behavior, BTW -- 'illegal' resolution (probably hard-coded to 1600x1200 or something) but manual xorgwizard sets it right -- but LXDE is foreign enough to me that I can't work it. Not much faster than XFCE, either, despite the 'lightweight' claims...
...check yer PM's, BTW
Yep. Also TahrNOP, Azami ChromeLite (a modified VividPup), X-Slacko 3.0, and several of peebee's LxPups (specifically Slacko, Tahr, Unicorn, and Vivid). All have the same result -- no signal. openchrome is the only driver that "works" even that well -- selecting vesa or modesetting results in not only the same effect at the GUI attempt, but also that it doesn't /quite/ get back to CLI mode on CTRL+ALT+BKSP. It freezes with a blinking cursor at the top of the screen, no text. Hard power-off is the only option.
...LxPrecise and X-Precise have identical GUI behavior, BTW -- 'illegal' resolution (probably hard-coded to 1600x1200 or something) but manual xorgwizard sets it right -- but LXDE is foreign enough to me that I can't work it. Not much faster than XFCE, either, despite the 'lightweight' claims...
EDIT: ah, I see you found my PM. Edited post to remove reply request...
...LxPrecise and X-Precise have identical GUI behavior, BTW -- 'illegal' resolution (probably hard-coded to 1600x1200 or something) but manual xorgwizard sets it right -- but LXDE is foreign enough to me that I can't work it. Not much faster than XFCE, either, despite the 'lightweight' claims...
EDIT: ah, I see you found my PM. Edited post to remove reply request...
X TAHR ON 64 BIT HP-PAVILION
RG66, THANK YOU!
------------------------------
X TAHR ON 64 BIT HP-PAVILION 8GB RAM , 700 GB HDD, WIN 8.1
X-TAHR WORKS PERFECTLY-ALL KINDS OF ACTION
-----------------------------
ONLY AUDIO MIXER REMADE
IT CAN NOT "SEE" ALL 8 GB OF RAM BUT ONLY 1,2 GB
THANKS AGAIN.
CAN WE HAVE PAE VERSION?
------------------------------
X TAHR ON 64 BIT HP-PAVILION 8GB RAM , 700 GB HDD, WIN 8.1
X-TAHR WORKS PERFECTLY-ALL KINDS OF ACTION
-----------------------------
ONLY AUDIO MIXER REMADE
IT CAN NOT "SEE" ALL 8 GB OF RAM BUT ONLY 1,2 GB
THANKS AGAIN.
CAN WE HAVE PAE VERSION?
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Re: X TAHR ON 64 BIT HP-PAVILION
Strange, Non-PAE should see at least 3GB of RAM. PAE version will come after the betas for V1.0.zagreb999 wrote:RG66, THANK YOU!
------------------------------
X TAHR ON 64 BIT HP-PAVILION 8GB RAM , 700 GB HDD, WIN 8.1
X-TAHR WORKS PERFECTLY-ALL KINDS OF ACTION
-----------------------------
ONLY AUDIO MIXER REMADE
IT CAN NOT "SEE" ALL 8 GB OF RAM BUT ONLY 1,2 GB
THANKS AGAIN.
CAN WE HAVE PAE VERSION?
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
I've uploaded a 1b3 ISO and 1b2 > 1b3 delta to the repo.
This will most likely be the last beta release, v1.0 will be mostly app updates.
Changes:
add categories to applications.menu
add Setup category to Control Panel
fixes to PPM and /etc/xdg/menus/hierarchy for Xfce menu
update PPM databases
update to firefox-38.2.1esr
update to retrovol-0.14.3-X
update to xfdesktop-4.12.3
update to yad-0.30.0
various small fixes
Download
http://smokey01.com/rg66/X-tahr/testing/
This will most likely be the last beta release, v1.0 will be mostly app updates.
Changes:
add categories to applications.menu
add Setup category to Control Panel
fixes to PPM and /etc/xdg/menus/hierarchy for Xfce menu
update PPM databases
update to firefox-38.2.1esr
update to retrovol-0.14.3-X
update to xfdesktop-4.12.3
update to yad-0.30.0
various small fixes
Download
http://smokey01.com/rg66/X-tahr/testing/
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Running off of 4gig external fat32 class 4 sd card on a
My wifi is internal usb.
internal 30 gig toshiba ext3 drive is just storage for sd card install.
Install done with unetbootin (linux version)
Will install grub4dos later on to replace syslinux bootloader for more boot options.
Have not made a save yet.
Everything hardware wise is working fine from what I can tell so far.
Nice distro rg66. Thanks from the mexican border.
This netbook is the new Puppy test box.
Code: Select all
root# inxi -Fxz
System: Host: Puppy-PC Kernel: 3.14.20 i686 (32 bit gcc: 4.6.4)
Desktop: Xfce 4.12.3 (Gtk 2.24.23) Distro: tahrpup 6.0.2
Machine: System: manda (portable) product: Intel powered classmate PC v: Gen 1.5L
Mobo: N/A model: N/A
Bios: American Megatrends v: CM94515A.86A.0024.2008.0715.1716 date: 07/15/2008
CPU: Single core Intel Core N270 (-HT-) cache: 512 KB
flags: (nx pae sse sse2 sse3 ssse3) bmips: 3193
clock speeds: max: 1600 MHz 1: 800 MHz 2: 1600 MHz
Graphics: Card: Intel Mobile 945GSE Express Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.org 1.15.1 driver: intel
tty size: 80x24 Advanced Data: N/A for root
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k3.14.20
Network: Card: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: ec00 bus-ID: 01:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 34.0GB (0.1% used)
ID-1: /dev/sda model: TOSHIBA_MK3008GA size: 30.0GB
ID-2: /dev/sdb model: Multi size: 4.0GB
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 121 Uptime: 13 min Memory: 202.1/994.6MB
Init: SysVinit runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.3.291) inxi: 2.2.28
root# cat /etc/DISTRO_SPECS
#One or more words that identify this distribution:
DISTRO_NAME='tahrpup'
#version number of this distribution:
DISTRO_VERSION=6.0.2
#The distro whose binary packages were used to build this distribution:
DISTRO_BINARY_COMPAT='ubuntu'
#Prefix for some filenames: exs: tahrsave.2fs, tahr-6.0.2.sfs
DISTRO_FILE_PREFIX='tahr'
#The version of the distro whose binary packages were used to build this distro:
DISTRO_COMPAT_VERSION='trusty'
#the kernel pet package used:
DISTRO_KERNEL_PET='Huge_Kernel'
DISTRO_XORG_AUTO='no'
DISTRO_TARGETARCH='x86'
DISTRO_DB_SUBNAME='tahr'
#32-byte alpha-numeric ID-string appended to vmlinuz, puppy_tahr_6.0.2.sfs, zdrv_tahr_6.0.2.sfs and devx.sfs:
DISTRO_IDSTRING='t150205211152ZZZZ6.0.2XXXXXXXXXX'
#Puppy default filenames...
#Note, the 'SFS' files below are what the 'init' script in initrd.gz searches for,
#for the partition, path and actual files loaded, see PUPSFS and ZDRV in /etc/rc.d/PUPSTATE
DISTRO_PUPPYSFS='puppy_tahr_6.0.2.sfs'
DISTRO_ZDRVSFS='zdrv_tahr_6.0.2.sfs'
DISTRO_ADRVSFS='adrv_tahr_6.0.2.sfs'
DISTRO_YDRVSFS='ydrv_tahr_6.0.2.sfs'
DISTRO_PUPPYDATE='Feb 2015'
[
Code: Select all
root# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:03:0D:A4:3C:CA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:1D:92:CD:0C:70
inet addr:192.168.254.5 Bcast:192.168.254.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12534 errors:0 dropped:20 overruns:0 frame:0
TX packets:8477 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16038319 (15.2 MiB) TX bytes:955182 (932.7 KiB)
root# lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 6: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 6: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 3, If 0, Class=Vendor Specific Class, Driver=rt73usb, 480M
|__ Port 8: Dev 4, If 0, Class=Mass Storage, Driver=ums-realtek, 480M
internal 30 gig toshiba ext3 drive is just storage for sd card install.
Install done with unetbootin (linux version)
Will install grub4dos later on to replace syslinux bootloader for more boot options.
Have not made a save yet.
Everything hardware wise is working fine from what I can tell so far.
Nice distro rg66. Thanks from the mexican border.
This netbook is the new Puppy test box.
X-tahr-1b3 beta
Manual frugal installation to a 32gb usb-3.0 flash drive, pc is an HP
desktop.
Operating System
Version
Kernel Linux 3.14.20 (i686)
Version #1 SMP Thu Jan 8 13:19:06 GMT 2015
C Library GNU C Library version 2.19 (stable)
Distribution tahrpup - 6.0.2
Current Session
Computer Name Puppy-PC
User Name root (root)
Home Directory /root
Desktop Environment XFCE 4
Display
Display
Resolution 3840x1080 pixels
Vendor The X.Org Foundation
Version 1.15.1
OpenGL
Vendor Advanced Micro Devices, Inc.
Renderer AMD Radeon HD 5570
Version 4.5.13397 Compatibility Profile Context 15.20.1046
Direct Rendering Yes
It's working well.
desktop.
Operating System
Version
Kernel Linux 3.14.20 (i686)
Version #1 SMP Thu Jan 8 13:19:06 GMT 2015
C Library GNU C Library version 2.19 (stable)
Distribution tahrpup - 6.0.2
Current Session
Computer Name Puppy-PC
User Name root (root)
Home Directory /root
Desktop Environment XFCE 4
Display
Display
Resolution 3840x1080 pixels
Vendor The X.Org Foundation
Version 1.15.1
OpenGL
Vendor Advanced Micro Devices, Inc.
Renderer AMD Radeon HD 5570
Version 4.5.13397 Compatibility Profile Context 15.20.1046
Direct Rendering Yes
It's working well.
- Attachments
-
- screenshot.jpg
- (36.78 KiB) Downloaded 1182 times
Delta downloaded and applied to non-PAE 1b2 iso. md5sum checked. Manual frugal install to 80Gb SSD in Fujitsu S6520 Core 2 Duo laptop.
Operating System
Version
Kernel Linux 3.14.20 (i686)
Version #1 SMP Thu Jan 8 13:19:06 GMT 2015
C Library GNU C Library version 2.19 (stable)
Distribution tahrpup - 6.0.2
Current Session
Computer Name Puppy-PC
User Name root (root)
Home Directory /root
Desktop Environment XFCE 4
Display
Resolution 1280x800 pixels
Vendor The X.Org Foundation
Version 1.15.1
OpenGL
Vendor Intel Open Source Technology Center
Renderer Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2
Version 2.1 Mesa 10.1.3
Direct Rendering Yes
Running well.
Operating System
Version
Kernel Linux 3.14.20 (i686)
Version #1 SMP Thu Jan 8 13:19:06 GMT 2015
C Library GNU C Library version 2.19 (stable)
Distribution tahrpup - 6.0.2
Current Session
Computer Name Puppy-PC
User Name root (root)
Home Directory /root
Desktop Environment XFCE 4
Display
Resolution 1280x800 pixels
Vendor The X.Org Foundation
Version 1.15.1
OpenGL
Vendor Intel Open Source Technology Center
Renderer Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2
Version 2.1 Mesa 10.1.3
Direct Rendering Yes
Running well.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
ram memory
RAM MEMORY X TAHR
4 DIFFERENT INFORMATIONS
WHICH ONE IS TRUE?
REGARDS.
4 DIFFERENT INFORMATIONS
WHICH ONE IS TRUE?
REGARDS.
- Attachments
-
- memory.jpg
- (103.22 KiB) Downloaded 344 times
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Re: ram memory
I can only see 3. 8227556 kB is the same as 8227MB. The /root properties is either disk space, savefile space or maybe tmpfs space if your in RAM.zagreb999 wrote:RAM MEMORY X TAHR
4 DIFFERENT INFORMATIONS
WHICH ONE IS TRUE?
REGARDS.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]