[...] (nwp installation sets the shortcut for the launcher itself as spacebar plus shift, but if you don't have jwm, you'll have to do it manually through whatever method you find convenient. The shortcut is used heavily if at all, i guess, and so my recommendation tries to make it fluid, simple, and quick). An almost complete (as of June 2016) list of shortcuts (interrupted by a list of fixes in the upcoming 1.9.1: geany and geany new instance were backwards on the root one menu; the mae aemenu (installation, port-store-backup, menumaker, shutdown+, and jwm config options submenus, etc) was never added to the nwp folder itself--the mae shortcut won't work until it's copied over (though you can activate it from the installation/download folder); trayfix old and new have been given more prominent placement on mae and its jwm equivalent; megasync's a builtin; ocr thanks to rcrsn51; …[one of the two upgrades in the works is in lieu of two isos. it upgrades p6.0 to what would have been p6.1 and makes ~572.15 out of -.14; other upgrade has no add-in pets. set for old syntax this time. fresh installs are generally quicker than upgrades so rename your old nwp if you're upgrading. once the folder turns to anubis (about 15 seconds on my slower machine) you can call from nwp rather than the install folder and/or complete the installation. pets run fixmenus and jwm -restart automatically so the update pack is just a click and a bunch of okaying (alt plus o or more clicking).....]
bb -- spit out bold tags
bb2 -- span tags for bold fonts or other, non default font choices (bold tags don't appear to work though the nwp's underlining and italics tags show the expected results). default is for monospace, same as po1, po2, po4 (the latter two are templates, po1 is an xdotool "spit this code" script/a backup of the main (monospace) template).
book -- older version of one of the tocs/tics--customize if you like
bpo -- open the default template files in a browser so you can see the line spacing, highlighting, etc. use gpo to edit what the command calls and what browser gets opened
bq -- block quote tags
f - findnrun
gpo -- open the browser, leafpad, and geany configuration files for the nwp word processor plus the default default templates in geany.# geany /nwp/po1 /nwp/po2 /nwp/po3 /nwp/po4 /nwp/po5 /nwp/po6 /nwp/gpo /nwp/lpo /nwp/bpo /nwp/bb2
h1-h6 -- print out tags for headings 1-6
her -- open the hr template in geany
herl -- open the hr template in leafpad
hero -- open the hr template in geany
hr -- print out hr tags
hr0 -- open the hr template in geany
hr0l -- open the hr template in leafpad
hr1 -- spit out hr doc template
hrl -- <hr> tag, 35%, grey left side
hrr -- <hr> tag, 10%, grey right side
hrt -- template for autopage breaks with hr tag. called by other scripts.
ii -- italics tags
link -- external form of the toc tags
lp -- launch leafpad
lpo -- leafpad /nwp/po2| leafpad /nwp/po4 /nwp/po5| leafpad /nwp/po6| leafpad /nwp/lpo (open the wp template files in leafpad; open the file that determines what leafpad opens
mono -- open monospace template with geany
mono1 -- spit out monospace doc template
monol -- open monospace template with leafpad
monot -- monospace template
np02 -- pu(/)up launcher (configured to begin with a highlighted /nwp/)
p -- pu(/)up launcher configured to start at the end of /nwp/
pb -- <par style="page-break-after: always"></par>
pba -- <par style="page-break-before: always"></par> (a=above)
po -- open po2
po1 -- print out an improved version of the preotry template
po2 -- (template--po1 without the mini-wait--use Clone (under Documents menu) or SaveAs to preserve the file)
po3 -- geany /nwp/po4 /nwp/po5 /nwp/po6 /nwp/po2
po4 -- template as 14 pt monospace
po5 -- template as 14 pt sans
po6 -- template as 14 pt serif
pr -- print out paragraph tags
prc -- print out paragraph centered tags
prj -- print out paragraph justified tags
prl -- print out paragraph left tags
prr -- print out paragraph right tags
q -- cite tags
san1 -- spit out sans serif doc template
sans -- open sans template with geany
sansl -- open sans template with leafpad
sanst -- sans serif doc template
ser1 -- spit out serif doc template
serf -- open serf template with geany
serfl -- open serf template with leafpad
sert -- serif doc template
sub -- subscript tags
sup -- superscript tags
t -- launch terminal of your choice (delete/comment sakura and uncomment or add your choice)
toc and tic paste bookmark/hyperlink codes. good for tables of contents, master documents, etc. on the editing side, you can make bookmarks in geany with ctrl+m, which will also toggle it off. ctrl plus comma is previous bookmark, control plus period is next bookmark. the plugin for numbered bookmarks makes a list on the side panel (unless that's default and i can't just can't figure out how to work/access the plug in version):
tic -- tic same page template and anchor --new tab
tic1 -- external page or same or external file, no anchor -- same tab
tic2 -- external page or same or external file with anchor -- same tab
toc -- toc same page template and anchor, same tab (general bookmarks). look up your text editor's method for bookmarking for the edit text (also non formatted) view.
toc1 -- external page or same or external file, no anchor -- new tab
toc2 -- external page or same or external file with anchor -- new tab
to open files in geany at specific location, append :line#:column# to the file, i.e. geany /nwp/docs/file1:50:14
ul -- underline
v -- activate vtg
xp -- launch xpad/new xpad
terminal nwp/pwn/pax shortcuts:
s# send active window to desktop#
s#s send next clicked window to desktop#
d# go to desktop#
c plus a single letter is normally a close command--cr, close rox; cu, close urxvt terminals; ct, close rxvt Terminal.
pp# --change pinboard
p# --change/toggle four panel set frame (can be altered down to one)
my# --swap out custom jwm configurations
gea3 --edit custom jwm configurations
la, lb, lm ---layer above, below, middle/normal for active window
las,lbs, lms ---layer above, below, middle/normal for selected window
stk, ustk --stick unstick active (add an s for the click to select version)
pv2--partview and rox /mnt
rr --rox recently visited
rb1 --four (iirc) rungs down on the rox bookmarks menu
rup --three rungs up from the bottom of the rox bookmarks menu (this and rr may need to be adjusted depending on how your rox filer is set up)
pcp --access pup control
fnr --find and run (same as f--fnr is it's traditional short.)
hlx -- htop in an urvxt window and lx task ...
ppm is a built in for package manager (will work in nwp launcher or terminal)
x#-- move to # on x-axis (increments of 5)
y# --move to # on y-axis (increments of 5)
h# --height (increments of 5)
w# --width (increments of 5)
rs --resize
t --terminal (set for my-applications/bin, so launchable from terminal or np/nwp/pxc launcher)
f --findandrun (also set for my-apps/bin)
np --nwpus launcher2 (no sweep right--prehighlighted entry)
sd --speeddials
sdr --speed dials recent list only
gnysys --open a slew of config files in geany
3but -- speed dials and a version of winswitcher
ww -- winswitcher (also ctrl plus spacebar).
galc -- galculator
nc-- notecase
gd -- goldendict
jv -- make java sfs and take you there (thanks, uten. (still there but superseded by rerwin's packages (two installed if you use the -ur version of the nwp))).
##5c -- now the command to make 5 copies of a file by command line.
5ce -- generate drag and drop file in your current working directory and another set to make editing it easier (set for 5 copies with the bulk-renameable extension X(followed by the number of copies). this is an improvement, i think, but you may prefer
mcc -- Make_Concurrent_Copies, which open a directory set for sets of three and five for a fairly wide variety of file types
##5cd -- [obs.]
7c -- print out the command for changing permissions of a script to executable (kind of lazy--chmod 755 isn't that involved...).(sorta made obsolete by the ch launchers (still arguably useful for vtg use)).
1 -- single monitor menu
2 -- double monitor menu
g -- grid menu
x -- x axis menu
y -- y axis menu
w -- width menu
h -- height menu
mv -- move
wn -- windows menu
mn -- minimize
mx -- maximize window
o -- old windows manipulation menu
s -- new version of supplemental menus
n -- the original nwpus menu
n1 -- the full word-processing menu without any of the supplementals. it has n2 and n3 as submenus but gives some prominence to the overall document formatting commands from n3
n2 -- just the highlight and click to apply word processing/html code section
n3 -- the paste and place section of the main (word processing) menu.
slac -- search all databases
sloc -- search selected database with option to print results #sometimes problematic
sluc --update all slocate databases/create databases (thanks to musher0 for the slocate wrapper and the three scripts i've renamed here)
ww - winswitcher
sv -- make a folder a server. open a terminal and sv in the pax launcher (nwp launcher, etc) will print out "python -m SimpleHTTPServerWithUpload"--open a browser in the client computer and input the ipnet address (run ifconfig in a terminal) with :8000 appended to it (i.e.
http://192.168.1.66:8000). this will allow you to upload and download files to the directory you ran the sv command (i.e. shift+spacebar (which pops up the modified pexec launcher showing /nwp/ in the entry box) then sv then enter) in.
by rcrsn51. thread here:
http://www.murga-linux.com/puppy/viewto ... 132#415132 (unnecessary now that it has a gui)
fw -- toggle firewall on off (actually give a pop up that provides the function. requires the pet by tronkel you can find at
http://murga-linux.com/puppy/viewtopic. ... 9ea478cf1f). rcrsn51's SimpleHTTPServerWithUpload won't run with the firewall in place and this is a convenient way to temporarily disable it.
-3--------------------------- 6
1 2----------------------- 8 9
-4 ----------------------------7
b5=full screen left, b10=full screen right. b series is halves and wholes.
1 2--------------6 7
--5----------------10
3 4--------------8 9
a# series is quadrants...
sk - sakura (also t in nwp/pwn/pax or any terminal for most of them (some may be set to urxvt or rxvt--they all have sakura though)
rn - gfnrename (batchrenamer)
hlx - htop (through urxvt) and lxtask
bh - adds bold tags around a selection of text in any text editor
uh - adds underline tags around a selection of text in any text editor
sth - add strikethrough tags around a selection of text in any editor or window that can receive text input
ih - add italics tags around a selection of text in any editor or window that can receive text input
bb - print out bold tags
cmt - print out comment (<!-- -->) tags
ii - print out italics tags
st - print out strikethrough tags
ul - print out underline tags
#wm -- go to one of the giant menu submenu menus (presently set for root 0 menu--requires jwm and the root3 folder in /nwp)--[Obs.]
some changes to the templates...
a much better way to launch and batch launch files (you'll get a dual view without having to to click the file more than once. for print preview of the pdf form of this essentially txt/html word processing document (though you can embed and link what you like , it seems), you'll need to access to your choice of browser/htmlviewer's print preview button. to change the headers and footers, you'll need to use your browser's print > options menu.
-------------
dual launchers (text editor and browser) for the Nooby Word Processor/nwp:
ggc -- geany, chrome
gigc -- geany new instance, chrome
gio -- geany new instance, opera
lgc -- leafpad, chromium
gif -- geany new instance, firefox
def -- default text editor, default browser
gf -- geany, firefox
tef -- default text editor, firefox
lff -- leafpad, firefox
gb -- geany, default browser
gib -- geany new instance, default browser
leb -- leafpad, default browser
leafy -- leafpad, seamonkey
dlll -- leafpad, dillo
ged -- geany, dillo
ges -- geany, seamonkey
lop -- leafpad, opera
gep -- geany, palemoon
gc -- geany, chromium
gip -- geany new instance, palemoon
gic -- geany new instance, chromium
lep -- leafpad, palemoon
gid -- geany new instance, dillo
lec -- leafpad, chromium
gis -- geany new instance, seamonkey
more shortcuts now available to the Nooby Uber Utility Pack
sda[1-6]-sdd[1-6] -- open those partitions
the following will open in rox if entered in the pw,n launcher: mnt, home, mdoc (opens root/my-documents), apps (opens usr/share/applications), jwm (/root/.jwm), bin, jxdg(etc/xdg/templates), conf (/root/.configure), mybin (/root/my-applications/bin), etc, tmp, and pack (/nwp).
at, at[1-10] are autotext scripts. atx is the template, ate will open the 11 in geany for you to edit/rename. single monitor setups now have similar nwp shortcuts as doubles:
q series is quarter sized up to five (which is configurable and centrally placed);
q6 and q7 set the active window to left and right halves of the screen respectively
q8 and q9 are top and bottom. q10 is full/maximized (as is mx).
Code:
q1 q2 q8
q5 q6 q7
q3 q4 q9
some deps, recs, and links:
pcp requires puppy control panel:
http://www.murga-linux.com/puppy/viewtopic.php?t=61961
tas requires take a shot:
http://murga-linux.com/puppy/viewtopic.php?t=84528
f requires find and run:
http://www.murga-linux.com/puppy/viewto ... 5582835582
xpc and xpb require xpad
[tas and find and run are now built ins--for original tas icon install the pet. some alternate icons in nwp/icons, nwp/keys, and nwp/root3/icons]
some other included shortcuts:
xpc -- xpad clear
xpb -- xpad back up
[these have been neglected because i mostly use "lpx" in place of xpad and sync the notes folder to my dropbox account--been meaning to switch copy out for rsync (but i still haven't read up on rsync beyond tales of its superiority]
cnt -- spit out the code in those echo sections from the script above that allows you to create files with predetermined content (cnt--content)
c- -- a comment line that looks like this: #------------------
tas -- SFR's take a shot
pcp -- radky's puppy control panel
ww -- MochiMoppel's WinSwitcher
v -- vtg
---------
(another batch from recent update:)
roks -- open k1-10 in geany for editing (they're rox bookmark files, but will open regular files with default handler in addition to directories with rox)
geak - open all the word processor templates in geany
duals -- open a folder containing a group of dual launchers (text editors and browsers) for use with the nooby word processor
paw -- page break above, white text
pbw -- page break below, white text
l- open launcher customized for leafpad
r- open launcher customized for rox
g- open launcher customized for geany
---------
another batch from recent update:
rad -- rox, starting level is /root/my-documents
rab -- rox, starting level is /root/my-applications/bin
gad -- geany, starting level is /root/my-documents
gab -- geany, starting level is /root/my-applications/bin
lad -- leafpad, starting level is /root/my-documents
lab -- leafpad, starting level is /root/my-applications/bin
chab -- chmod 755 (allow script to run) prefix, starting level is /root/my-applications/bin
atdesk --make a desktop template
jp -- open jwmrc-personal with geany
(a new gynysys based on the move of many files out of root and root/my-applications/bin and into /nwp. will open a duplicate for you to modify)
hi - hard info
mr - sfr's multi rename
ppm --so you can call the ppm from the nwp launcher without having to go to findnrun or a terminal or backspace or ctrl-a over the text (/nwp/)
v - the vtg (also working well in quirky)
m - pmount and partview
veg - same a alt+g -- vgt, nwp and puup help
gi - new instance of geany
cursor at right versions of launcher
p -- main nwp launcher
ch - permissions launcher
gl - geany launcher (also -g)
ll - leafpad launcher (also -l)
rl - rox launcher (also -r)
highlighted entry versions:
r- rox launcher
g- geany launcher
ch- change permissions launcher
l- leafpad launcher
f1-f36 --type those function keys
(one of my machines is without) Crying or Very sad(though 1600 virtual key keypad(s) make up for it--not every program will accept all it has to offer, but you can try F36 plus up to four modifiers (k launcher, acswf36 (alt, control, shift, windows key--that's the pattern. from one to four modifiers in alphabetical order for alphanumeric characters and function keys to F36--rename the call codes whatever you like. single digit codes all unused though i've been finding sometimes too cryptic's not much of a help (but the k2 launcher gives you 600 by number--iirc, just the function and numbers starting with the former with four modifiers? (i prefer the other version, but the easiest way to set keycuts for programs may be through a menu you generate for the purpose))))).
elp - help opened up in leafpad (mostly paste and paste cheats until you modify them)
tem - ae templates menu
*********************
AEMENU KEYCUTS:
what it is -- what to enter into the p,wn launcher:
nwp and submenus -- n
word processor without supplemental menus -- n1
paste and place formatting codes only -- n2
highlight and select formatting codes only -- n3
supplemental -- s
single monitors -- 1
double monitors -- 2
aef -- aemenu containing (nearly?) all the aemenus
pw,n launchers for nwp -- pwns
grids (x and y by 100 pixel increments) -- g
extra windows manipulation menu -- o
points on axis y -- y
points on axis x -- x
width by fives -- w
height by fives -- h
templates and dual launchers -- tem
aemenu dual launchers -- dual
aemenu window size and placement -- w1
(new one, "elp," pops up a leafpad document with what's between the asterisk trains. modify to taste)
*********************
new additions:
gg and the key launchers [documentation pending]
http://www.murga-linux.com/puppy/viewto ... 274#895274
main key launcher -- k
key launcher for 669 version -- k2 (as separate launcher)
key launcher without sweep right-- k-
key launcher, change permissions of mini script (key, key sequence, etc)-- kch
open key folder -- kir
key launcher, mod keys in geany -- kg
key launcher, mod keys in geany, new instance -- kgi
key launcher, mod keys (rename, save as, repeat, etc) in leafpad -- kl
key launcher, return to main launcher -- p
gg -- aemenu popup for custom geany items (vtg, keys, menu entries--use as a template to put other programs' shortcuts in easier reach and/or a custom arrangement.
pwns -- aemenu of all the launchers
aef -- all the aemenus as an aemenu popup
_______
vtg5 opens up an expanded version of "elp" in geany.
***
mae -- configuration menu (ae menu also containing port, store, install scripts for use with NWPDE i.e. the insta-configure setup in /nwp/c)
ams1-3 -- toggle in the three alternate menu sets (for new installs, as of version 1.9 you needn't use any of the my series quickswitches to use this or the other toggle functions (with the exception of the six keyboard configuration switches (kb1on-kb6on---also on the ae and jwm menus in less cryptic form (jwm version of the mae menu you find starting in 1.9 is on the root four and five (up and down, alt+four and +five) menus and the shutdown+ menu on the left click (root1, alt+1) menu.)
my1-4 -- keyboard centric configuration toggle
my1r-my42 -- reverse those configurations. pattern is the same for the my30-my49 quickswitches.
avtray and dvtray 1 and the rest of the menu and tray swapping commands were originally for the menus and so may not be worded/shortened for nwp launcher use, but looking at the rest of that menu making menu (what mae originally was, although first called maekr (still there as a copy you can mod) and aei (also still there--you can mod that for your five custom jobbies in nwp/root3. they in turn can be your default swap-ins when and if you decide you take your current/future-current setup with you.
when i make 1.9 official (it's in the repo but i haven't announced in a murga-linux thread) i'll likely first clean away all from the following that isn't a launch code, but you can always check out what code launches a menu item using the same method as for editing. unfortunately for ae menus, it's usually a two step ll since the first one will only show you the name of the file it's reading--this second one is the one you need to actually look at. for menu making items, tray items, etc, for now see here (or ll > maek in the launcher, maek being the file mae reads):
http://www.murga-linux.com/puppy/viewto ... 121#905121
ilkon -- open up desktop template, leafpad
igkon -- open up desktop template, geany
from the notes file in the recs section:
Kind of related to the following idea of nwp as remaster-tool, you could use it as a sort of bootleg zero-install method. For example, i have a number of programs and scripts (01micko's get_libre office utility, MochiMoppel's SpeedDials and Winswitcher (ww), SFR and Step's FindnRun(f), etc) that aren't installed, but get called as if they are through the launcher that pretends the nwp is part of the executables' path/PATH. You can do it with scripts by renaming them and moving them into the nwp (get_libreoffice becomes getlibre in the launcher, speed dials is sd or sdr, if you just want the recents to pop up), and many pets are amenable to the same with one or two extra steps (uncompress the folder, find the script that the pet is a wrapper for, then move it and/or rename it). Of course, some things are just easier left as pets (but you may know how to make a jwm theme but not know how to make a pet of it--easier just to copy it over to its correct location perhaps).
bonus on the bootleg0: the which command will give you the location of the scripts powering most pets you and other developers have installed (it doesn't distinguish between builtins and addins). you could then just up arrow that in the terminal, prepend with "geany" or "leafpad" and a space, hit enter, then save the thing that pops up as a nwp/pwn shortcut (i.e. give it a short, easy to remember (and associate with its intended function) name and save it in the /nwp folder so the shift plus spacebar launcher can launch it. rename the keys in a similar (though easier) way: kl (or kg) in the main launcher followed by the keycode/key call--then rename the script or a copy of it).
here's that menu with a little substitution so it more resembles the rest of the list on these pages (less codey and saves you a click):
menu "menu maker
aemenu launcher template -- ael
aemenu--given program -- aeae
aemenu--given title -- aeae2
aemenu template -- aeaem
jwm --given program -- jwmkr
jwm --given label -- jwmmkr
jwm menu template -- jwmm
jwm includes template -- jwmi
[these follow the same pattern as the highlight and click to apply formatting codes in the n,n1, and n2 ae menus]
grab exec commands --leafpad -- e4ml
grab exec commands --geany -- e4m
end
menu "Select Custom Keyboard Configuration
keycentric configs:" "
keyboard-1 (my1) -- my1
keyboard-2 (my2) -- my2
keyboard-3 (my3) -- my3
keyboard-4 (my4) -- my4
reverse keycentric configs:" "
reverse my1 (my1) -- my1r
reverse my2 (my2r) -- my2r
reverse my3 (my3r) -- my3r
reverse my4 (my4r) -- my4r
edit quickswitches (40 series and KB) -- edit4i
these could be made into two separate scripts for launcher (rather than menu/launcher-to-menu) activation:
menu "edit the 6 key configs:
edit keys: geany" "geany /nwp/root3/9menusblanks/keys0 /nwp/root3/9menusblanks/keys1 /nwp/root3/9/keys0 /nwp/root3/9/keys1 /nwp/root3/10/keys0 /nwp/root3/10/keys1
edit keys: geany -i" "geany -i /nwp/root3/9menusblanks/keys0 /nwp/root3/9menusblanks/keys1 /nwp/root3/9/keys0 /nwp/root3/9/keys1 /nwp/root3/10/keys0 /nwp/root3/10/keys1
[geany -i means a new instance (window)--it's easier to copy and paste between menu sets that way. another, somewhat related tip: if you drag file contents to a tab it will open--together with select to copy and middle click to paste, menu making is more like finger painting than coding (not that i really know how to do the latter). three sets of nine seemed like too many slots for individual leafpad entries (just use rl > root3 and open the files individual if that's what you want), and scrolling from the first to (a version of?) the thirtieth seemed like a stretch without the new window, but you could also open the lot in the same/current geany.]
Choose Alternate Key Configuration (my1-4 series only):"
(the 4 can swap 6)" "
KB1 -- kb1on
KB2 -- kb2on
KB3 -- kb3on
(these are the swap on keyboard configs mentioned earlier)
KB4 -- kb4on
KB5 -- kb5on
KB6 -- kb6on
menu "Swap Menu Sets
edit menu set 1 -- ems1
edit menu set 2 -- ems2
edit menu set 3 -- ems3
activate menu set 1 -- ams1
activate menu set 2 -- ams2
activate menu set 3 -- ams3
edit menu set 1i -- ems1i
edit menu set 2i -- ems2i
edit menu set 3i -- ems3i
(edit items from this menu is what i had in mind with the earlier comment regarding geany and the keyboard configs)
menu "edit configs and helpers
edit/open configuration files --jwm -- gea3i
edit my40 series config switches -- edit4i
edit quickswitches (30 series) -- edit3i
edit main jwm configs -- joopi
edit main jwm system configs -- jpe
edit panels incoming -- edpanc
edit panels current -- edpan
edit pinboards incoming -- edpinc
edit panels current -- edpin
edit panels incoming--new instance -- edpanic
edit panels current--new instance -- edpani
edit pinboards incoming--new instance -- edpinic
edit panels current--new instance -- edpini
edit word processing templates -- geak
edit rox shortcuts -- roks
edit autotext shortcuts -- ate
edit this menu--geany" "geany jwmim
fixmenus; jwm -restart -- fixu
swap to tray syntax for older jwm setups -- jio
swap to tray syntax for newer jwm setups -- jin
edit this menu--leafpad" "leafpad /nwp/jwmim
edit my40 series config switches -- edit4i
edit my30 series config switches -- edit3i
end
menu "tray toggles
move over the stock tray a pixel (better mouse menu access) -- xover1
undo the pixel move -- undoxover1
toggle off stock tray -- puptrayoff
toggle on stock tray -- puptrayon
SEND" "fixmenus; jwm -restart ---this one exists as "fixu"
menu "deactivate vertical trays (odd #s are set to left by default)
deactivate vertical tray12 -- dvtray12
deactivate vertical tray11 -- dvtray11
deactivate vertical tray10 -- dvtray10
deactivate vertical tray9 -- dvtray9
deactivate vertical tray8 -- dvtray8
deactivate vertical tray7 -- dvtray7
deactivate vertical tray6 -- dvtray6
deactivate vertical tray5 -- dvtray5
deactivate vertical tray4 -- dvtray4
deactivate vertical tray3 -- dvtray3
deactivate vertical tray2 -- dvtray2
deactivate vertical tray1 -- dvtray1
end
menu "deactivate top and bottom trays
deactivate top tray6 -- dtop6
deactivate top tray5 -- dtop5
deactivate top tray4 -- dtop4
deactivate top tray3 -- dtop3
deactivate top tray2 -- dtop2
deactivate top tray1 -- dtop1
deactivate bottom tray6 -- dbot6
deactivate bottom tray5 -- dbot5
deactivate bottom tray4 -- dbot4
deactivate bottom tray3 -- dbot3
deactivate bottom tray2 -- dbot2
deactivate bottom tray1 -- dbot1
menu "activate top and bottom trays
activate top tray6 -- atop6
activate top tray5 -- atop5
activate top tray4 -- atop4
activate top tray3 -- atop3
activate top tray2 -- atop2
activate top tray1 -- atop1
activate bottom tray6 -- abot6
activate bottom tray5 -- abot5
activate bottom tray4 -- abot4
activate bottom tray3 -- abot3
activate bottom tray2 -- abot2
activate bottom tray1 -- abot1
end
menu "activate vertical trays (odd #s are set to left by default)
activate vertical tray12 -- avtray12
activate vertical tray11 -- avtray11
activate vertical tray10 -- avtray10
activate vertical tray9 -- avtray9
activate vertical tray8 -- avtray8
activate vertical tray7 -- avtray7
activate vertical tray6 -- avtray6
activate vertical tray5 -- avtray5
activate vertical tray4 -- avtray4
activate vertical tray3 -- avtray3
activate vertical tray2 -- avtray2
activate vertical tray1 -- avtray1
end
end
Install/configure/store/port (entries with > need two commands):
edit the jwm version of this menu -- [gl (or ll)] > jwmim
edit the ae version of this menu -- [gl (or ll)] > aeim
edit 30 series -- edit3i
edit 40 series -- edit4i
back up current/original configuration files -- bk
restore original/previous configuration files -- rbk
port configuration files from /nwp/c -- port
store configuration files in /nwp/c -- store
edit recs, port, store -- editport
end
[my30-49, my30r-my49r were here]
edit quickswitches (30 series and KB) -- edit3i
fixmenus; jwm -restart -- fixu
edit quickswitches (40 series and KB) -- edit4i
menu "shutdown2
menu "window button issue
no buttons (possible bugfix) -- nobut
standard -- standbut
line buttons -- linebut
square buttons -- sqbut
winswitcher -- ww
recents -- sdr
rox recents -- rr
_____________
wiz -- run the wizard wizard
pcp -- (same as wiz but with pupcontrol commented out. ll > pcp > switch position of pound sign if you've installed pup control (panel? popup? not sure where i got that last p from. name change with version 2.8?) and want a separate launcher cut for it)
lpx -- ae menu that uses (mostly) leafpad as a notetaker
t2x -- print out text2xpm code template
t2x2 -- same as above plus template for a .desktop file (presumably to match up a program with the icon you just made)
jin -- trayfix-new
jio -- trayfix-old
aekill (or killae)--solve an issue reported by musher0 (who introduced me to aemenu and how to use its syntax--thanks, musher). apparently too many launched in succession can cause it to hang or not close menus it otherwise should have--this will allow it to continue as normal (once i remember seeing lxtask showing some hanging menus, but the few didn't affect much. this was on a random check of what was going on with the system (i get a kick out of htop and lxtask). another time it did, or i think it did--there were quite a few and i think i noticed some sluggishness and checked for an actual reason. or at least that's the reason there's now an aekill/killae.
cadi -- close all instances of active window's program
ccdi -- close just program's windows on current desktop
caw -- MochiMoppel's CloseAllWindows script (like cadi and ccdi but with more options and a popup)
_____
new for 1.9.2:
backup Geany configs -- backg
store Geany configs -- storeg
port Geany configs -- portg
restore original/previous Geanyconfigs -- restg
geanytweak -- backg
-- portg
store LibreOffice configs -- storel
restore original/previous LibreOffice configs -- restl
backup LibreOffice configs -- backl
port LibreOffice configs -- portl
portil -- backl
-- portl
equivalent of back/portg and back/portl now removed from installation (2)step2 and each made into scripts/buttons (wrong picture covering them but that's essentially what they are--i may just copy the syntax from the wizard wizard and make this stuff a panel at some point--could use tx2 (text2xpm code printout) to make label-buttons and skip the text field part...). "portil" backs up the current lo configs if any and ports in your custom choice. "geanytweak" backs up the original geany configurations (keyboard, toolbar, main) and ports in a set ready made with the vtg tweak in place, a history set at roughly 50 configuration files (including all those from the three folders (9,10, 9menusblanks) in root3 that feed JWM the info for the menus, trays, and keys), the necessary keycuts for the custom geany menus (set for alt9, alt0, alt2 (also middle click) at the moment) to work, and enables spell check. jag and jagvk should be on the new recent documents list, which should help you in your menu making endeavors. swap the non vk version (it shows you the code the other has in the scripts--follow its pattern to add more keys and set them after the menu is made by keys>edit>[clicking your menu]) out (relabel, expand, copy) for use with other programs or to add additional menus. look at root4menu, root5menu, root2menu, root9menu, root0menu for that "<Includes>" line--change to match other menus you'd like to add by pointing to the new files (no reason for that menu to repeat five times, the space efficiency of pipe menus notwithstanding. control+shift o (or right click>open selected file) take the inconvenience out of files reading from other files--it's a cool feature another reason i recommend editing the JWM stuff in geany over leafpad).
fixes to joop, joopi, jp, and jpe
(typo on "jwmrc-tray," defunct files removed; joop and joopi open all the keys, menus, and trays in the main three in root3; joopi does it in a new instance of geany. jp opens just jwmrc-personal and /etc/.../_root_.jwmrc. jpe opens the tray in addition to these two. you could just open joop in geany (gl launcher) and access the files individually with the right click as described above). dopey name for joop/i is mnemonic for root plus jwm--both will open over forty files at once. vtg5 gave another five files to add to the recents list…
_____
edit: four and five contain the installation, configuration switches, menumaking, and port-store-restore submenus--i never put the custom program menus on those (but you're free to if you like--just add an includes line wherever you want it to go, sandwich it between <Menu></Menu> tags to compress a submenu to a line on the main if your menus get too long (copy the other menu templates to see how to label it--well, the second one's fine as is. for the top of the sandwich just add a label="" tag:
<Menu label="your title here">
[menu entries or an <Includes></Includes> line]
</Menu>
))
.
***
for 192, you can skip the second step of the install sequence (the one labeled "2," not the actual second step, which is labeled 00--install the deps and move the nwp folder to /, then proceed to 1step1, which will back up your jwm configs and move some useful files to /root/my-applications/bin--the nwp launcher calls on these for some functions and to reset itself should you get finger-tied or typo it past convenience) and transfer over the configuration files for the vtg and custom menus/menu templates. the recs from 1.9 are gone and replaced by just geany 125 and the plugin pack for it (both made by Corvus). i added two 1.27 plugins (overview and multiterm) that are working well for me in Xenialpup--haven't tried them in anything else yet (and so they're commented out). you could skip the recs and still have the vtg, but the extend select and some of the other functions shown on the menus won't work without the plugins.