Installation Driver Dongle WIFI RT2870
Installation Driver Dongle WIFI RT2870
Bonjour,
Je suis nouvel utilisateur Linux et viens d'installer Toutou Linux 4.3.1 sur une vielle machine.
J'aimerais y connecter un dongle Wifi RT2870, mais ne sais pas trop comment m'y prendre. J'ai un CD avec les drivers, mais pas de fichier .pet ou .sfs.
Pourriez vous me dire comment faire ?
Merci
Steph.
Je suis nouvel utilisateur Linux et viens d'installer Toutou Linux 4.3.1 sur une vielle machine.
J'aimerais y connecter un dongle Wifi RT2870, mais ne sais pas trop comment m'y prendre. J'ai un CD avec les drivers, mais pas de fichier .pet ou .sfs.
Pourriez vous me dire comment faire ?
Merci
Steph.
Ralink RT3070sta usb wifi device driver
Les anglais disent que le pilote RT2870 est inclus dans la Puppy 4.3.1.
en général les pilotes inclus ne sont pas assez efficaces pour les clés Wifi. Essaies malgré tout. Sinon installes le pilote qui va bien et reboote. Normalement tu réussiras, la Puppy 4.3.1 est un classique, et le forum aura ta réponse (successful)
Theoriquement Un pilote est disponible pour Toutou, regardes la liste des dongles ici, cliques le bleu
Si tu trouves le tien, installes le pilote listé pour le kernel de la Toutou 4.3.1 (- Kernel : 2.6.30.5 )
RT3070 et 2870 interchangeables ? à verifier
Details:
- - rt3070sta for the RT3070 USB wifi device, modified to also recognise: modifiés pour reconnaitre aussi
- - - Buffalo WLI-UC-GN, device ID's 0411:015d & 0411:014f
- - - Tenda W541U, device ID 148f,0x2070 (Tenda W541U V2.0 is already recognised)
- - rt3090sta for the RT3090 PCIe wifi device
- - rt3562sta for the RT3060/RT3062/RT3562/RT2860/RT2760/RT2890/RT2790 PCI(e) devices
- - rt3572sta for the RT3572/RT2870 USB wifi devices
- - rt2870sta for the RT2870-derivative USB wifi devices
- - rt3370sta for the RT3070/RT3370/RT2870 USB wifi devices
Si tu cause un minimum anglais, pose la question à rscrn si jamais ta marque n'est pas listée
en général les pilotes inclus ne sont pas assez efficaces pour les clés Wifi. Essaies malgré tout. Sinon installes le pilote qui va bien et reboote. Normalement tu réussiras, la Puppy 4.3.1 est un classique, et le forum aura ta réponse (successful)
Theoriquement Un pilote est disponible pour Toutou, regardes la liste des dongles ici, cliques le bleu
Si tu trouves le tien, installes le pilote listé pour le kernel de la Toutou 4.3.1 (- Kernel : 2.6.30.5 )
RT3070 et 2870 interchangeables ? à verifier
Details:
- - rt3070sta for the RT3070 USB wifi device, modified to also recognise: modifiés pour reconnaitre aussi
- - - Buffalo WLI-UC-GN, device ID's 0411:015d & 0411:014f
- - - Tenda W541U, device ID 148f,0x2070 (Tenda W541U V2.0 is already recognised)
- - rt3090sta for the RT3090 PCIe wifi device
- - rt3562sta for the RT3060/RT3062/RT3562/RT2860/RT2760/RT2890/RT2790 PCI(e) devices
- - rt3572sta for the RT3572/RT2870 USB wifi devices
- - rt2870sta for the RT2870-derivative USB wifi devices
- - rt3370sta for the RT3070/RT3370/RT2870 USB wifi devices
Si tu cause un minimum anglais, pose la question à rscrn si jamais ta marque n'est pas listée
- Attachments
-
- RT2870.jpg
- Voilà la liste
- (52.19 KiB) Downloaded 594 times
Last edited by Pelo on Tue 01 Mar 2016, 09:52, edited 1 time in total.
De toute façon il te faudra installer le pet, même s'il est
Le forum Puppy est réputé pour toujours aider les nouveaux venus, avec courtoisie et dévouement
quand tu cherches à te connecter, tu as 'load module' en haut, tu dois avoir RT2870 ou RT3070 dans la liste. Je suis sur une Puppy precise, je te dis çà de mémoire.
De toute façon il te faudra installer le pet, même s'il est listé
Avec un dongle la réception est extra. Tu as pris la 4.3.1, Frisbee est dans la 4.3.6.
je te cherches un tuto, valable pour le présent (ceux de Toutou pour la Wifi ne sont pas légion)
Je l'ai... en anglais
"Well if you use the rt3070sta from "Extras for Puppy 4.3 with 2.6.30.5 kernel"
http://www.murga-linux.com/puppy/viewto ... 450#346450
then no extra steps are involved. The new driver is automatically added to the list of WPA-compatible drivers in Puppy's Netork Wizard."
quand tu cherches à te connecter, tu as 'load module' en haut, tu dois avoir RT2870 ou RT3070 dans la liste. Je suis sur une Puppy precise, je te dis çà de mémoire.
De toute façon il te faudra installer le pet, même s'il est listé
Avec un dongle la réception est extra. Tu as pris la 4.3.1, Frisbee est dans la 4.3.6.
je te cherches un tuto, valable pour le présent (ceux de Toutou pour la Wifi ne sont pas légion)
Je l'ai... en anglais
"Well if you use the rt3070sta from "Extras for Puppy 4.3 with 2.6.30.5 kernel"
http://www.murga-linux.com/puppy/viewto ... 450#346450
then no extra steps are involved. The new driver is automatically added to the list of WPA-compatible drivers in Puppy's Netork Wizard."
- Attachments
-
- réseau.png
- choisis Sns (pas pwireless au départ)
- (61.87 KiB) Downloaded 530 times
-
- realtek.jpg
- Quand çà va bien, ta clé apparait automatiquement
- (58.8 KiB) Downloaded 527 times
Bonsoir,
@Pelo : j'ai trouvé où installer les modules, et ai également trouvé le module RT2870, mais c'est pas mieux, mon toutou ne reconnais toujours pas le dongle. Au démarrage j'ai toujours une fenêtre "Votre carte sans fil n'a pas été détectée".
@rcrsn51 : Thanks for your help. The ID of my dongle is : Vendor 148f ProdID 7601.
I have a file tar.bz2 with the dongle, unzip it, but can't run it. I tried to read the "Readme" file, but... it's a bit hard for me... I attache the file.
Thanks a lot.
@Pelo : j'ai trouvé où installer les modules, et ai également trouvé le module RT2870, mais c'est pas mieux, mon toutou ne reconnais toujours pas le dongle. Au démarrage j'ai toujours une fenêtre "Votre carte sans fil n'a pas été détectée".
@rcrsn51 : Thanks for your help. The ID of my dongle is : Vendor 148f ProdID 7601.
I have a file tar.bz2 with the dongle, unzip it, but can't run it. I tried to read the "Readme" file, but... it's a bit hard for me... I attache the file.
Thanks a lot.
- Attachments
-
- Readmefile.zip
- (6.63 KiB) Downloaded 214 times
Bonsoir Steph,
Le lien de téléchargement donné par rcrsn51 est un fichier .pet : mt7601Usta_puppy_431-k2.6.30.5.pet
(les sources de ce driver mt7601 sont disponibles ici).
Cordialement,
Médor.
Le lien de téléchargement donné par rcrsn51 est un fichier .pet : mt7601Usta_puppy_431-k2.6.30.5.pet
(les sources de ce driver mt7601 sont disponibles ici).
Cordialement,
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
@Steph et M�dor:
I finally saw datafilehost change a .pet into a .exe by using a Windows browser. It works OK for me with Linux browsers. I will need to rethink my use of datafilehost.
Download the driver from here instead. Click the small green DOWNLOAD box.
I finally saw datafilehost change a .pet into a .exe by using a Windows browser. It works OK for me with Linux browsers. I will need to rethink my use of datafilehost.
Download the driver from here instead. Click the small green DOWNLOAD box.
les tar.gz
on approche de la solution. çà va fonctionner
le navigateur qui transforme les pets en exe sous Windows, je savais pas.
et les tar.gz ? on peut faire une version tar.gz du pet. ( )
Steph being newbie, don't ask him to compile. pfeee, médor !
le navigateur qui transforme les pets en exe sous Windows, je savais pas.
et les tar.gz ? on peut faire une version tar.gz du pet. ( )
Steph being newbie, don't ask him to compile. pfeee, médor !
@ Pelo :
Un pet est une archive au format tar.gz avec une somme de contrôle
À partir des Puppy v6 (Slacko-5.7.0 +) la compression peut aussi être faite au format tar xz.
Le lien vers les sources est là pour référence si l'on veut compiler ce driver mt7601 pour d'autres noyaux plus récents mais un nouveau driver est disponible à partir du noyau k4.2
Médor.
Un pet est une archive au format tar.gz avec une somme de contrôle
À partir des Puppy v6 (Slacko-5.7.0 +) la compression peut aussi être faite au format tar xz.
Le lien vers les sources est là pour référence si l'on veut compiler ce driver mt7601 pour d'autres noyaux plus récents mais un nouveau driver est disponible à partir du noyau k4.2
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
Merci rcrsn
Merci rcrsn Bon Toutou steph..
dans deux ou 3 mois, on essaiera plus neuf.. Pas avant.
Peux -tu modifier le titre du topic en mettant toutou 431 dedans
"Driver Dongle WIFI RT2870 pour Toutou 431"
C'est pour que çà profite à tout le monde..
dans deux ou 3 mois, on essaiera plus neuf.. Pas avant.
Peux -tu modifier le titre du topic en mettant toutou 431 dedans
"Driver Dongle WIFI RT2870 pour Toutou 431"
C'est pour que çà profite à tout le monde..