Xenialpup CE 7.5 / 25 Nov 2017

A home for all kinds of Puppy related projects
Post Reply
Message
Author
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#241 Post by 666philb »

new iso uploaded ...see first post http://murga-linux.com/puppy/viewtopic.php?t=106479
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Top
Robin2
Posts: 180
Joined: Sat 17 Jan 2015, 18:17

#242 Post by Robin2 »

Thanks @666philb

I think you have changed the title of this Thread from 7.0.1 to 7.0.3

It may help to avoid confusion to mention that in the Original Post.

...R
Top
watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

#243 Post by watchdog »

Great job! Thanks. All working fine in my new frugal install.

Code: Select all

System:    Host: puppypc26591 Kernel: 4.1.30 i686 (32 bit) Desktop: JWM 2.3.5
           Distro: xenialpup 7.0.3
Machine:   System: Hewlett-Packard (portable) product: HP 550 v: F.02
           Mobo: Hewlett-Packard model: 3618 v: KBC Version 12.00
           Bios: Hewlett-Packard v: 68MVU Ver. F.02 date: 08/20/2008
CPU:       Single core Intel Celeron 530 (-UP-) cache: 1024 KB speed: 1733 MHz (max)
Graphics:  Card: Intel Mobile GME965/GLE960 Integrated Graphics Controller
           Display Server: X.Org 1.18.3 drivers: intel (unloaded: vesa)
           Resolution: 1280x800@60.02hz
           GLX Renderer: Mesa DRI Intel 965GME/GLE x86/MMX/SSE2 GLX Version: 2.1 Mesa 11.2.0
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.1.30
Network:   Card-1: Intel 82562GT 10/100 Network Connection driver: e1000e
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:22:64:4a:70:62
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
           IF: wlan0 state: down mac: 00:21:00:5b:0a:06
Drives:    HDD Total Size: 120.0GB (89.5% used)
           ID-1: /dev/sda model: Hitachi_HTS54251 size: 120.0GB
Partition: ID-1: swap-1 size: 1.05GB used: 0.25GB (24%) fs: swap dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 124 Uptime: 18 min Memory: 446.8/992.3MB
           Client: Shell (urxvt) inxi: 2.2.14

Code: Select all

#losetup-FULL -a
/dev/loop0: [0015]:2144 (/initrd/mnt/tmpfs/puppy_xenial_7.0.3.sfs)
/dev/loop1: [2049]:2883600 (/initrd/mnt/dev_save/xenial703/xenialsave_cryptx-now.2fs), encryption XOR (type 1)
/dev/loop2: [0015]:2200 (/initrd/mnt/tmpfs/adrv_xenial_7.0.3.sfs)
/dev/loop4: [0015]:2172 (/initrd/mnt/tmpfs/zdrv_xenial_7.0.3.sfs)
/dev/loop6: [2049]:4197607 (/initrd/mnt/dev_save/devx_xenial_7.0.3.sfs)
/dev/loop7: [2049]:4198183 (/initrd/mnt/dev_save/kernel_sources-4.1.30-xenial_PAE.sfs)
/dev/loop8: [2049]:61 (/initrd/mnt/dev_save/LibreOffice-4.3.2_it_gz.sfs)

Code: Select all

#free
             total       used       free     shared    buffers     cached
Mem:       1016132     435580     580552     127332      46080     269248
-/+ buffers/cache:     120252     895880
Swap:      1023996     244428     779568
user-installed-packages

Code: Select all

pulseaudio-4.0-tahr-i686|pulseaudio|4.0-tahr-i686||BuildingBlock|14272K||pulseaudio-4.0-tahr-i686.pet||pulseaudio|ubuntu|trusty||
skype-4.3.0.37|skype|4.3.0.37||BuildingBlock|44204K||skype-4.3.0.37.pet||Skype Internet Telephony|puppy|puppy||
adduser_3.113+nmu3ubuntu4|adduser|3.113+nmu3ubuntu4||Setup|648K|pool/main/a/adduser|adduser_3.113+nmu3ubuntu4_all.deb|+perl-base&ge5.6.0,+passwd&ge4.1.5.1,+debconf|add and remove users and groups|ubuntu|xenial||
debconf_1.5.58ubuntu1|debconf|1.5.58ubuntu1||System|547K|pool/main/d/debconf|debconf_1.5.58ubuntu1_all.deb||Debian configuration management system|ubuntu|xenial||
libmysqlclient20_5.7.13|libmysqlclient20|5.7.13|0ubuntu0.16.04.2|BuildingBlock|4128K|pool/main/m/mysql-5.7|libmysqlclient20_5.7.13-0ubuntu0.16.04.2_i386.deb|+mysql-common&ge5.5,+libc6&ge2.4,+libgcc1&ge4.2,+libstdc++6&ge4.1.1,+zlib1g&ge1.1.4|MySQL database client library|ubuntu|xenial||
libpam-modules_1.1.8|libpam-modules|1.1.8|3.2ubuntu2|Setup|875K|pool/main/p/pam|libpam-modules_1.1.8-3.2ubuntu2_i386.deb||Pluggable Authentication Modules for PAM|ubuntu|xenial||
libpq5_9.5.3|libpq5|9.5.3|0ubuntu0.16.04|BuildingBlock|268K|pool/main/p/postgresql-9.5|libpq5_9.5.3-0ubuntu0.16.04_i386.deb|+libc6&ge2.4,+libgssapi-krb5-2&ge1.10+dfsg,+libldap-2.4-2&ge2.4.7,+libssl1.0.0&ge1.0.0|PostgreSQL C client library|ubuntu|xenial||
libsemanage1_2.3|libsemanage1|2.3|1build3|BuildingBlock|264K|pool/main/libs/libsemanage|libsemanage1_2.3-1build3_i386.deb|+libsemanage-common&eq2.3,+libaudit1&ge2.2.1,+libbz2-1.0,+libc6&ge2.8,+libselinux1&ge2.1.12,+libsepol1&ge2.1.4,+libustr-1.0-1&ge1.0.4|SELinux policy management library|ubuntu|xenial||
libsemanage-common_2.3|libsemanage-common|2.3|1build3|Filesystem;filemanager|28K|pool/main/libs/libsemanage|libsemanage-common_2.3-1build3_all.deb||Common files for SELinux policy management libraries|ubuntu|xenial||
libustr-1.0-1_1.0.4-5|libustr-1.0-1|1.0.4-5||BuildingBlock|268K|pool/main/u/ustr|libustr-1.0-1_1.0.4-5_i386.deb|+libc6&ge2.4|Micro string library: shared library|ubuntu|xenial||
mysql-common_5.7.13|mysql-common|5.7.13|0ubuntu0.16.04.2|Personal;database|179K|pool/main/m/mysql-5.7|mysql-common_5.7.13-0ubuntu0.16.04.2_all.deb||MySQL database common files e.g. /etc/mysql/my.cnf|ubuntu|xenial||
passwd_4.2|passwd|4.2|3.1ubuntu5|Personal;lock|2391K|pool/main/s/shadow|passwd_4.2-3.1ubuntu5_i386.deb|+libaudit1&ge2.2.1,+libc6&ge2.8,+libpam0g&ge0.99.7.1,+libselinux1&ge1.32,+libsemanage1&ge2.0.3,+lsb-base&ge4.1+Debian11ubuntu7,+libpam-modules,+debianutils&ge2.15.2|change and administer password and group data|ubuntu|xenial||
motion_3.2.12+git20140228|motion|3.2.12+git20140228|8build1|BuildingBlock|822K|pool/universe/m/motion|motion_3.2.12+git20140228-8build1_i386.deb|+libavcodec-ffmpeg56&ge2.4,+libavfilter-ffmpeg5&ge2.4,+libavformat-ffmpeg56&ge2.4,+libavutil-ffmpeg54&ge2.4,+libc6&ge2.15,+libjpeg8&ge8c,+libmysqlclient20&ge5.7.11,+libpq5,+libsdl1.2debian&ge1.2.11,+libsqlite3-0&ge3.5.9,+debconf&ge0.5,+adduser|V4L capture program supporting motion detection|ubuntu|xenial||
libgcj16_5.4.0|libgcj16|5.4.0|6ubuntu1|BuildingBlock|40470K|pool/main/g/gcc-5|libgcj16_5.4.0-6ubuntu1~16.04.2_i386.deb|+gcc-5-base&ge5.2.1-23,+libgcj-common&ge4.1.1-21,+libasound2&ge1.0.16,+libc6&ge2.15,+libgcc1&ge4.2,+libgmp10&ge5.0.1,+zlib1g&ge1.1.4|Java runtime library for use with gcj|ubuntu|xenial||
libgcj-common_4.9.3|libgcj-common|4.9.3|9ubuntu1|BuildingBlock|217K|pool/main/g/gcc-defaults|libgcj-common_4.9.3-9ubuntu1_all.deb||Java runtime library common files|ubuntu|xenial||
pdftk_2.02-4|pdftk|2.02-4||Utility;help|2873K|pool/universe/p/pdftk|pdftk_2.02-4_i386.deb|+libc6&ge2.4,+libgcc1&ge3.0,+libgcj16&ge5,+libstdc++6&ge5.2|tool for manipulating PDF documents|ubuntu|xenial||
cursor_themes-1-1|cursor_themes|1-1||Desktop|41276K||cursor_themes-1-1.pet||themes for mouse cursor||||
mtools_4.0.18-2|mtools|4.0.18-2||Filesystem;filemanager|359K|pool/main/m/mtools|mtools_4.0.18-2_i386.deb|+libc6&ge2.7|Tools for manipulating MSDOS files|ubuntu|xenial||
libv4l2rds0_1.10.0-1|libv4l2rds0|1.10.0-1||BuildingBlock|87K|pool/main/v/v4l-utils|libv4l2rds0_1.10.0-1_i386.deb|+libc6&ge2.4|Video4Linux Radio Data System RDS decoding library|ubuntu|xenial||
v4l-utils_1.10.0-1|v4l-utils|1.10.0-1||BuildingBlock|728K|pool/universe/v/v4l-utils|v4l-utils_1.10.0-1_i386.deb|+libv4l-0&eq1.10.0-1,+libv4l2rds0&eq1.10.0-1,+libc6&ge2.15,+libgcc1&ge4.2,+libstdc++6&ge5.2,+libudev1&ge183|Collection of command line video4linux utilities|ubuntu|xenial||
libqt4-declarative_4.8.7+dfsg|libqt4-declarative|4.8.7+dfsg|5ubuntu2|BuildingBlock|4218K|pool/main/q/qt4-x11|libqt4-declarative_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libgcc1&ge4.2,+libqt4-network&eq4.8.7+dfsg,+libqt4-script&eq4.8.7+dfsg,+libqt4-sql&eq4.8.7+dfsg,+libqt4-xmlpatterns&eq4.8.7+dfsg,+libqtcore4&eq4.8.7+dfsg,+libqtgui4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 Declarative module|ubuntu|xenial||
libqt4-network_4.8.7+dfsg|libqt4-network|4.8.7+dfsg|5ubuntu2|Network|2108K|pool/main/q/qt4-x11|libqt4-network_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.15,+libgcc1&ge4.2,+libqtcore4&eq4.8.7+dfsg,+libqtdbus4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1,+zlib1g&ge1.1.4|Qt 4 network module|ubuntu|xenial||
libqt4-script_4.8.7+dfsg|libqt4-script|4.8.7+dfsg|5ubuntu2|BuildingBlock|2919K|pool/main/q/qt4-x11|libqt4-script_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libgcc1&ge4.2,+libqtcore4&eq4.8.7+dfsg,+libqtdbus4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 script module|ubuntu|xenial||
libqt4-sql_4.8.7+dfsg|libqt4-sql|4.8.7+dfsg|5ubuntu2|BuildingBlock|409K|pool/main/q/qt4-x11|libqt4-sql_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libgcc1&ge3.0,+libqtcore4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 SQL module|ubuntu|xenial||
libqt4-xml_4.8.7+dfsg|libqt4-xml|4.8.7+dfsg|5ubuntu2|BuildingBlock|425K|pool/main/q/qt4-x11|libqt4-xml_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libgcc1&ge3.0,+libqtcore4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 XML module|ubuntu|xenial||
libqt4-xmlpatterns_4.8.7+dfsg|libqt4-xmlpatterns|4.8.7+dfsg|5ubuntu2|BuildingBlock|4480K|pool/main/q/qt4-x11|libqt4-xmlpatterns_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libgcc1&ge4.2,+libqt4-network&eq4.8.7+dfsg,+libqtcore4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 XML patterns module|ubuntu|xenial||
libqtcore4_4.8.7+dfsg|libqtcore4|4.8.7+dfsg|5ubuntu2|BuildingBlock|4942K|pool/main/q/qt4-x11|libqtcore4_4.8.7+dfsg-5ubuntu2_i386.deb|+qtcore4-l10n,+libc6&ge2.15,+libgcc1&ge4.2,+libglib2.0-0&ge2.22.0,+libstdc++6&ge5.2,+zlib1g&ge1.1.4|Qt 4 core module|ubuntu|xenial||
libqtdbus4_4.8.7+dfsg|libqtdbus4|4.8.7+dfsg|5ubuntu2|BuildingBlock|689K|pool/main/q/qt4-x11|libqtdbus4_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libdbus-1-3&ge1.9.14,+libgcc1&ge3.0,+libqt4-xml&eq4.8.7+dfsg,+libqtcore4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1|Qt 4 D-Bus module library|ubuntu|xenial||
libqtgui4_4.8.7+dfsg|libqtgui4|4.8.7+dfsg|5ubuntu2|BuildingBlock|12690K|pool/main/q/qt4-x11|libqtgui4_4.8.7+dfsg-5ubuntu2_i386.deb|+fontconfig,+libaudio2,+libc6&ge2.15,+libfontconfig1&ge2.11.1,+libfreetype6&ge2.3.5,+libgcc1&ge4.2,+libglib2.0-0&ge2.12.0,+libice6&ge1.0.0,+libjpeg8&ge8c,+libmng2&ge1.0.10,+libpng12-0&ge1.2.13-4,+libqt4-declarative&eq4.8.7+dfsg,+libqtcore4&eq4.8.7+dfsg,+libsm6,+libstdc++6&ge4.1.1,+libtiff5&ge4.0.3,+libx11-6&ge1.2.99.901,+libxext6,+libxi6&ge1.2.99.4,+libxrender1,+zlib1g&ge1.1.4|Qt 4 GUI module|ubuntu|xenial||
v4l2ucp_2.0.2-4|v4l2ucp|2.0.2-4||BuildingBlock|236K|pool/universe/v/v4l2ucp|v4l2ucp_2.0.2-4_i386.deb|+libc6&ge2.7,+libgcc1&ge4.1.1,+libqtcore4&ge4.7.0,+libqtgui4&ge4.5.3,+libstdc++6&ge4.4.0,+libv4l-0&ge0.5.0|Video for Linux 2 Universal Control Panel|ubuntu|xenial||
libqt4-opengl_4.8.7+dfsg|libqt4-opengl|4.8.7+dfsg|5ubuntu2|BuildingBlock|1229K|pool/main/q/qt4-x11|libqt4-opengl_4.8.7+dfsg-5ubuntu2_i386.deb|+libc6&ge2.4,+libfreetype6&ge2.2.1,+libgcc1&ge4.2,+libgl1-mesa-glx,+libqtcore4&eq4.8.7+dfsg,+libqtgui4&eq4.8.7+dfsg,+libstdc++6&ge4.1.1,+libx11-6,+libxrender1|Qt 4 OpenGL module|ubuntu|xenial||
libqtwebkit4_2.3.2|libqtwebkit4|2.3.2|0ubuntu11|BuildingBlock|37031K|pool/universe/q/qtwebkit-source|libqtwebkit4_2.3.2-0ubuntu11_i386.deb|+libc6&ge2.11,+libfontconfig1&ge2.9.0,+libgcc1&ge4.1.1,+libgl1-mesa-glx,+libglib2.0-0&ge2.37.3,+libgstreamer-plugins-base1.0-0&ge1.0.0,+libgstreamer1.0-0&ge1.0.0,+libjpeg8&ge8c,+libpng12-0&ge1.2.13-4,+libqt4-network&ge4.7.0,+libqt4-opengl&ge4.5.3,+libqtcore4&ge4.8.4,+libqtgui4&ge4.8.0,+libsqlite3-0&ge3.5.9,+libstdc++6&ge5.2,+libx11-6,+libxml2&ge2.7.4,+libxrender1,+libxslt1.1&ge1.1.25,+zlib1g&ge1.2.0|Web content engine library for Qt|ubuntu|xenial||
google-talkplugin_current_i386-latest03032014|google-talkplugin|current|current||||google-talkplugin_current_i386-latest03032014.deb|||
google-talkplugin_current_i386-latest05072016|google-talkplugin|current|current||||google-talkplugin_current_i386-latest05072016.deb|||
pavrecord-0.9.6-1|pavrecord|0.9.6-1||Internet|124K||pavrecord-0.9.6-1.pet||Pavrecord Audio-Video recorder/player||||
debbi-1.2|debbi|1.2||BuildingBlock|32K||debbi-1.2.pet||Brother printer driver installer||||
hplip_scan-3.14.10|hplip_scan|3.14.10|||2044K||hplip_scan-3.14.10.pet||HP scanner driver|puppy|wary5||
Top
backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#244 Post by backi »

Hi !
After upgrading to 7.0.3 my internet no longer working
not possible to setup networks again......no networks found .

Did work fine with 7.0.2 .
Top
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#245 Post by 666philb »

try a fresh boot
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Top
backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#246 Post by backi »

Did it ......with pfix=ram.........but....no longer networks found .
Last edited by backi on Sun 14 Aug 2016, 16:14, edited 1 time in total.
Top
jlst

#247 Post by jlst »

what happens is that
Top
jlst

#248 Post by jlst »

this is a kernel issue... most likely.

i found that the ath5k driver does not load ... "module not found"... so if you're having issues, just replace the zdrv with the one from a previous version.

this is solved by editing the kernel DOTconfig adding as many modules as possible, in the wireless section whatever... can't remember.

i think the LTS kernel dotconfig 4.4.x in the woofce kernel kit might have appropriate settings, of course it will be a little bigger... i'll take a look
Top
sitdown
Posts: 13
Joined: Sat 03 Jan 2015, 18:58

#249 Post by sitdown »

Belham wrote:
sitdown wrote:Hi,

Sitdown,

Sorry about the learning curve with pups and/or pup-inspired OSes. On the plus side, if you can stick with it, just for a bit longer, you will start to learn new things and it will be a joy, as you begin to get a basic understanding of how things work together, and what you can and cannot do.

Listen, if you need help with your wireless (I responded in your other thread), and also questions about things like "get flash", a situation where Adobe just recently completely restructured their web site (and thus downloads) which caused the script which automatically retrieved the latest "flash" to not work, throwing up the exact error you are seeing, there are easy work arounds.

There's two ways to attack the "Flash" problem. Arguably, the easiest way is to go straight to the Adobe Web site, download the Linux tar.gz of the bit version you are using. Close your browser. Then, unarchive that tar.gz you just downloaded by just clicking on it and choosing "unarchive" or whatever your pup uses for un-tarring tar.gz files, accept the defaults as it will usually open the un-tarred folder & place it right beside the actual tar.gz file. You will see in this un-tarred folder the actual libflashplayer.so file in it. Open up another "File" window, go straight to /usr/lib64, you should see a shortcut folder of "adobe-flashplugin". Click on it, when it opens you will see the exact same #####.so file, delete the existing one, copy in the new one that you just unarchived, and then restart the browser. Voila, you've the latest flashplayer version for all browsers you are using in that pup.

Doing this works for many things in puppies, like updating browsers overall, updating flashplayer, and quite a few other things. The beauty of pups is their incredible flexibility and adaptability. that, and, as you've discovered, they will make you learn a few things which will make you want to learn even more.

Good luck!! Respond if you have any questions.
Thank you. It is not often i take the time to sit down with computerstuff anymore, this and bad memory makes quite much fade away by time. But some of the knowlegde will still be gathered ;)

You responded on my other thread under another nick then?
There was mentioned a new firmware to my wireless card, you mean i can upgrade the firmware through Windows then?

Actually i got the wireless to work on pup64 7.0.7, but i tried 7.0.3 (32 bit i presume?). The date of the file is newer, so i guessed it might have some modules, and i guessed that 7.0.7 was just the same as 7.0.2 with 64 bit adaption, but i guess i guessed wrongly? ;)

When you wrote version of flash, you meant witch version i prefer? I guess the newest one will be most secure? And the speed won't be that different?
Top
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#250 Post by 666philb »

backi wrote:Did it ......with pfix=ram.........but....no longer networks found .
can you pm me your /var/log/messages
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Top
backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#251 Post by backi »

Here is /var/log/messages :

Aug 14 19:28:33 puppypc17086 syslog.info syslogd started: BusyBox v1.24.2
Aug 14 19:28:33 puppypc17086 user.notice kernel: klogd started: BusyBox v1.24.2 (2016-05-06 19:02:43 BST)
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys cpuset
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys cpu
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys cpuacct
Aug 14 19:28:33 puppypc17086 user.notice kernel: Linux version 4.1.30 (root@puppypc23704) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.1) ) #1 SMP PREEMPT Fri Aug 12 18:33:11 BST 2016
Aug 14 19:28:33 puppypc17086 user.info kernel: Disabled fast string operations
Aug 14 19:28:33 puppypc17086 user.info kernel: e820: BIOS-provided physical RAM map:
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f7bffff] usable
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x000000003f7c0000-0x000000003f7cdfff] ACPI data
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x000000003f7ce000-0x000000003f7fffff] ACPI NVS
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: NX (Execute Disable) protection: active
Aug 14 19:28:33 puppypc17086 user.info kernel: SMBIOS 2.4 present.
Aug 14 19:28:33 puppypc17086 user.debug kernel: DMI: TOSHIBA Satellite L40/Satellite L40, BIOS V2.10 06/23/2007
Aug 14 19:28:33 puppypc17086 user.debug kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 14 19:28:33 puppypc17086 user.info kernel: e820: last_pfn = 0x3f7c0 max_arch_pfn = 0x1000000
Aug 14 19:28:33 puppypc17086 user.debug kernel: MTRR default type: uncachable
Aug 14 19:28:33 puppypc17086 user.debug kernel: MTRR fixed ranges enabled:
Aug 14 19:28:33 puppypc17086 user.debug kernel: 00000-9FFFF write-back
Aug 14 19:28:33 puppypc17086 user.debug kernel: A0000-BFFFF uncachable
Aug 14 19:28:33 puppypc17086 user.debug kernel: C0000-CFFFF write-protect
Aug 14 19:28:33 puppypc17086 user.debug kernel: D0000-DFFFF uncachable
Aug 14 19:28:33 puppypc17086 user.debug kernel: E0000-EFFFF write-through
Aug 14 19:28:33 puppypc17086 user.debug kernel: F0000-FFFFF write-protect
Aug 14 19:28:33 puppypc17086 user.debug kernel: MTRR variable ranges enabled:
Aug 14 19:28:33 puppypc17086 user.debug kernel: 0 base 000000000 mask FC0000000 write-back
Aug 14 19:28:33 puppypc17086 user.debug kernel: 1 base 03F800000 mask FFF800000 uncachable
Aug 14 19:28:33 puppypc17086 user.debug kernel: 2 disabled
Aug 14 19:28:33 puppypc17086 user.debug kernel: 3 disabled
Aug 14 19:28:33 puppypc17086 user.debug kernel: 4 disabled
Aug 14 19:28:33 puppypc17086 user.debug kernel: 5 disabled
Aug 14 19:28:33 puppypc17086 user.debug kernel: 6 disabled
Aug 14 19:28:33 puppypc17086 user.debug kernel: 7 disabled
Aug 14 19:28:33 puppypc17086 user.info kernel: PAT not supported by CPU.
Aug 14 19:28:33 puppypc17086 user.debug kernel: original variable MTRRs
Aug 14 19:28:33 puppypc17086 user.debug kernel: reg 0, base: 0GB, range: 1GB, type WB
Aug 14 19:28:33 puppypc17086 user.debug kernel: reg 1, base: 1016MB, range: 8MB, type UC
Aug 14 19:28:33 puppypc17086 user.info kernel: total RAM covered: 1016M
Aug 14 19:28:33 puppypc17086 user.info kernel: Found optimal setting for mtrr clean up
Aug 14 19:28:33 puppypc17086 user.info kernel: gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G
Aug 14 19:28:33 puppypc17086 user.debug kernel: New variable MTRRs
Aug 14 19:28:33 puppypc17086 user.debug kernel: reg 0, base: 0GB, range: 1GB, type WB
Aug 14 19:28:33 puppypc17086 user.debug kernel: reg 1, base: 1016MB, range: 8MB, type UC
Aug 14 19:28:33 puppypc17086 user.debug kernel: initial memory mapped: [mem 0x00000000-0x021fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Aug 14 19:28:33 puppypc17086 user.info kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x00000000-0x000fffff] page 4k
Aug 14 19:28:33 puppypc17086 user.info kernel: init_memory_mapping: [mem 0x37800000-0x379fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x37800000-0x379fffff] page 2M
Aug 14 19:28:33 puppypc17086 user.info kernel: init_memory_mapping: [mem 0x20000000-0x377fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x20000000-0x377fffff] page 2M
Aug 14 19:28:33 puppypc17086 user.info kernel: init_memory_mapping: [mem 0x00100000-0x1fffffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x00100000-0x001fffff] page 4k
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x00200000-0x1fffffff] page 2M
Aug 14 19:28:33 puppypc17086 user.info kernel: init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: [mem 0x37a00000-0x37bfdfff] page 4k
Aug 14 19:28:33 puppypc17086 user.debug kernel: BRK [0x01c74000, 0x01c74fff] PGTABLE
Aug 14 19:28:33 puppypc17086 user.debug kernel: BRK [0x01c75000, 0x01c75fff] PGTABLE
Aug 14 19:28:33 puppypc17086 user.info kernel: RAMDISK: [mem 0x3f609000-0x3f7affff]
Aug 14 19:28:33 puppypc17086 user.info kernel: Allocated new RAMDISK: [mem 0x37a57000-0x37bfd618]
Aug 14 19:28:33 puppypc17086 user.info kernel: Move RAMDISK from [mem 0x3f609000-0x3f7af618] to [mem 0x37a57000-0x37bfd618]
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Early table checksum verification disabled
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: RSDP 0x00000000000F7E10 000024 (v02 TOSASU)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: XSDT 0x000000003F7C0100 00006C (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: FACP 0x000000003F7C0290 0000F4 (v03 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: DSDT 0x000000003F7C05E0 007DFB (v01 TOSASU TOSASU00 00000005 INTL 20051117)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: FACS 0x000000003F7CE000 000040
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: FACS 0x000000003F7CE000 000040
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: APIC 0x000000003F7C0390 00005C (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: MCFG 0x000000003F7C03F0 00003C (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: BOOT 0x000000003F7C05B0 000028 (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: SLIC 0x000000003F7C0430 000176 (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: OEMB 0x000000003F7CE040 00004B (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: HPET 0x000000003F7C83E0 000038 (v01 TOSASU TOSASU00 06000723 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: TCPA 0x000000003F7C8420 000032 (v01 TOSASU TOSASU00 00000001 MSFT 00000097)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: SSDT 0x000000003F7C8460 00086D (v01 AMI CPU_CST 00000001 INTL 20051117)
Aug 14 19:28:33 puppypc17086 user.debug kernel: ACPI: Local APIC address 0xfee00000
Aug 14 19:28:33 puppypc17086 user.notice kernel: 123MB HIGHMEM available.
Aug 14 19:28:33 puppypc17086 user.notice kernel: 891MB LOWMEM available.
Aug 14 19:28:33 puppypc17086 user.info kernel: mapped low ram: 0 - 37bfe000
Aug 14 19:28:33 puppypc17086 user.info kernel: low ram: 0 - 37bfe000
Aug 14 19:28:33 puppypc17086 user.info kernel: Zone ranges:
Aug 14 19:28:33 puppypc17086 user.info kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: Normal [mem 0x0000000001000000-0x0000000037bfdfff]
Aug 14 19:28:33 puppypc17086 user.info kernel: HighMem [mem 0x0000000037bfe000-0x000000003f7bffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: Movable zone start for each node
Aug 14 19:28:33 puppypc17086 user.info kernel: Early memory node ranges
Aug 14 19:28:33 puppypc17086 user.info kernel: node 0: [mem 0x0000000000001000-0x000000000009efff]
Aug 14 19:28:33 puppypc17086 user.info kernel: node 0: [mem 0x0000000000100000-0x000000003f7bffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000003f7bffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: On node 0 totalpages: 259934
Aug 14 19:28:33 puppypc17086 user.debug kernel: DMA zone: 40 pages used for memmap
Aug 14 19:28:33 puppypc17086 user.debug kernel: DMA zone: 0 pages reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: DMA zone: 3998 pages, LIFO batch:0
Aug 14 19:28:33 puppypc17086 user.debug kernel: Normal zone: 2190 pages used for memmap
Aug 14 19:28:33 puppypc17086 user.debug kernel: Normal zone: 224254 pages, LIFO batch:31
Aug 14 19:28:33 puppypc17086 user.debug kernel: HighMem zone: 31682 pages, LIFO batch:7
Aug 14 19:28:33 puppypc17086 user.info kernel: Using APIC driver default
Aug 14 19:28:33 puppypc17086 user.info kernel: Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PM-Timer IO Port: 0x808
Aug 14 19:28:33 puppypc17086 user.debug kernel: ACPI: Local APIC address 0xfee00000
Aug 14 19:28:33 puppypc17086 user.info kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 14 19:28:33 puppypc17086 user.debug kernel: ACPI: IRQ0 used by override.
Aug 14 19:28:33 puppypc17086 user.debug kernel: ACPI: IRQ9 used by override.
Aug 14 19:28:33 puppypc17086 user.info kernel: Using ACPI (MADT) for SMP configuration information
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000
Aug 14 19:28:33 puppypc17086 user.info kernel: smpboot: Allowing 2 CPUs, 1 hotplug CPUs
Aug 14 19:28:33 puppypc17086 user.info kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Aug 14 19:28:33 puppypc17086 user.info kernel: clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
Aug 14 19:28:33 puppypc17086 user.info kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Aug 14 19:28:33 puppypc17086 user.info kernel: PERCPU: Embedded 17 pages/cpu @f702f000 s40780 r0 d28852 u69632
Aug 14 19:28:33 puppypc17086 user.debug kernel: pcpu-alloc: s40780 r0 d28852 u69632 alloc=17*4096
Aug 14 19:28:33 puppypc17086 user.debug kernel: pcpu-alloc: [0] 0 [0] 1
Aug 14 19:28:33 puppypc17086 user.info kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257704
Aug 14 19:28:33 puppypc17086 user.notice kernel: Kernel command line: psubdir=XENIALPUP pmedia=ideflash pfix=ram
Aug 14 19:28:33 puppypc17086 user.info kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing CPU#0
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing HighMem for node 0 (00037bfe:0003f7c0)
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing Movable for node 0 (00000000:00000000)
Aug 14 19:28:33 puppypc17086 user.info kernel: Memory: 1014016K/1039736K available (8662K kernel code, 526K rwdata, 2468K rodata, 488K init, 484K bss, 25720K reserved, 0K cma-reserved, 126728K highmem)
Aug 14 19:28:33 puppypc17086 user.info kernel: virtual kernel memory layout:
Aug 14 19:28:33 puppypc17086 user.info kernel: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
Aug 14 19:28:33 puppypc17086 user.info kernel: pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
Aug 14 19:28:33 puppypc17086 user.info kernel: vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
Aug 14 19:28:33 puppypc17086 user.info kernel: lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
Aug 14 19:28:33 puppypc17086 user.info kernel: .init : 0xc1b66000 - 0xc1be0000 ( 488 kB)
Aug 14 19:28:33 puppypc17086 user.info kernel: .data : 0xc1875e41 - 0xc1b648c0 (3002 kB)
Aug 14 19:28:33 puppypc17086 user.info kernel: .text : 0xc1000000 - 0xc1875e41 (8663 kB)
Aug 14 19:28:33 puppypc17086 user.info kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Aug 14 19:28:33 puppypc17086 user.info kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Aug 14 19:28:33 puppypc17086 user.info kernel: Preemptible hierarchical RCU implementation.
Aug 14 19:28:33 puppypc17086 user.info kernel: Additional per-CPU info printed with stalls.
Aug 14 19:28:33 puppypc17086 user.info kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Aug 14 19:28:33 puppypc17086 user.info kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Aug 14 19:28:33 puppypc17086 user.info kernel: NR_IRQS:2304 nr_irqs:440 16
Aug 14 19:28:33 puppypc17086 user.debug kernel: CPU 0 irqstacks, hard=f6808000 soft=f680a000
Aug 14 19:28:33 puppypc17086 user.info kernel: Console: colour VGA+ 80x25
Aug 14 19:28:33 puppypc17086 user.info kernel: console [tty0] enabled
Aug 14 19:28:33 puppypc17086 user.info kernel: clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Aug 14 19:28:33 puppypc17086 user.debug kernel: hpet clockevent registered
Aug 14 19:28:33 puppypc17086 user.info kernel: tsc: Fast TSC calibration using PIT
Aug 14 19:28:33 puppypc17086 user.info kernel: tsc: Detected 1862.024 MHz processor
Aug 14 19:28:33 puppypc17086 user.info kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.04 BogoMIPS (lpj=1862024)
Aug 14 19:28:33 puppypc17086 user.info kernel: pid_max: default: 32768 minimum: 301
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Core revision 20150410
Aug 14 19:28:33 puppypc17086 user.notice kernel: TOSHIBA Satellite detected - force copy of DSDT to local memory
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: Forced DSDT copy: length 0x07DFB copied locally, original unmapped
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: All ACPI Tables successfully acquired
Aug 14 19:28:33 puppypc17086 user.info kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys blkio
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys memory
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys devices
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys freezer
Aug 14 19:28:33 puppypc17086 user.info kernel: Initializing cgroup subsys net_cls
Aug 14 19:28:33 puppypc17086 user.info kernel: Disabled fast string operations
Aug 14 19:28:33 puppypc17086 user.info kernel: mce: CPU supports 6 MCE banks
Aug 14 19:28:33 puppypc17086 user.debug kernel: CPU0: Thermal monitoring handled by SMI
Aug 14 19:28:33 puppypc17086 user.info kernel: process: using mwait in idle threads
Aug 14 19:28:33 puppypc17086 user.info kernel: Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Aug 14 19:28:33 puppypc17086 user.info kernel: Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
Aug 14 19:28:33 puppypc17086 user.info kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 14 19:28:33 puppypc17086 user.info kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 14 19:28:33 puppypc17086 user.info kernel: smpboot: CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz (fam: 06, model: 0e, stepping: 0c)
Aug 14 19:28:33 puppypc17086 user.info kernel: Performance Events: Core events, core PMU driver.
Aug 14 19:28:33 puppypc17086 user.info kernel: ... version: 1
Aug 14 19:28:33 puppypc17086 user.info kernel: ... bit width: 40
Aug 14 19:28:33 puppypc17086 user.info kernel: ... generic registers: 2
Aug 14 19:28:33 puppypc17086 user.info kernel: ... value mask: 000000ffffffffff
Aug 14 19:28:33 puppypc17086 user.info kernel: ... max period: 000000007fffffff
Aug 14 19:28:33 puppypc17086 user.info kernel: ... fixed-purpose events: 0
Aug 14 19:28:33 puppypc17086 user.info kernel: ... event mask: 0000000000000003
Aug 14 19:28:33 puppypc17086 user.info kernel: x86: Booted up 1 node, 1 CPUs
Aug 14 19:28:33 puppypc17086 user.info kernel: smpboot: Total of 1 processors activated (3724.04 BogoMIPS)
Aug 14 19:28:33 puppypc17086 user.info kernel: devtmpfs: initialized
Aug 14 19:28:33 puppypc17086 user.info kernel: PM: Registering ACPI NVS region [mem 0x3f7ce000-0x3f7fffff] (204800 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
Aug 14 19:28:33 puppypc17086 user.info kernel: xor: measuring software checksum speed
Aug 14 19:28:33 puppypc17086 user.info kernel: pIII_sse : 4636.000 MB/sec
Aug 14 19:28:33 puppypc17086 user.info kernel: prefetch64-sse: 4972.000 MB/sec
Aug 14 19:28:33 puppypc17086 user.info kernel: xor: using function: prefetch64-sse (4972.000 MB/sec)
Aug 14 19:28:33 puppypc17086 user.info kernel: pinctrl core: initialized pinctrl subsystem
Aug 14 19:28:33 puppypc17086 user.info kernel: NET: Registered protocol family 16
Aug 14 19:28:33 puppypc17086 user.info kernel: cpuidle: using governor ladder
Aug 14 19:28:33 puppypc17086 user.info kernel: cpuidle: using governor menu
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: bus type PCI registered
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: not using MMCONFIG
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: Using configuration type 1 for base access
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: mmxx1 gen() 1832 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: mmxx2 gen() 1992 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse1x1 gen() 1285 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse1x2 gen() 1761 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse2x1 gen() 1867 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse2x1 xor() 1638 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse2x2 gen() 2003 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: sse2x2 xor() 1818 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: using algorithm sse2x2 gen() 2003 MB/s
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: .... xor() 1818 MB/s, rmw enabled
Aug 14 19:28:33 puppypc17086 user.info kernel: raid6: using intx1 recovery algorithm
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Added _OSI(Module Device)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Added _OSI(Processor Device)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Added _OSI(Processor Aggregator Device)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: Executed 1 blocks of module-level executable AML code
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI : EC: EC started
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Interpreter enabled
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: (supports S0 S3 S4 S5)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Using IOAPIC for interrupt routing
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: Using MMCONFIG for extended config space
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Aug 14 19:28:33 puppypc17086 user.info kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 14 19:28:33 puppypc17086 user.info kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Aug 14 19:28:33 puppypc17086 user.debug kernel: acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
Aug 14 19:28:33 puppypc17086 user.debug kernel: acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored)
Aug 14 19:28:33 puppypc17086 user.debug kernel: acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
Aug 14 19:28:33 puppypc17086 user.debug kernel: acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored)
Aug 14 19:28:33 puppypc17086 user.debug kernel: acpi PNP0A08:00: host bridge window [mem 0x3f800000-0xffffffff window] (ignored)
Aug 14 19:28:33 puppypc17086 user.debug kernel: PCI: root bus 00: using default resources
Aug 14 19:28:33 puppypc17086 user.info kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI host bridge to bus 0000:00
Aug 14 19:28:33 puppypc17086 user.info kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: reg 0x10: [mem 0xff680000-0xff6fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: reg 0x14: [io 0xec00-0xec07]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: reg 0x1c: [mem 0xff640000-0xff67ffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.1: reg 0x10: [mem 0xff580000-0xff5fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xff63c000-0xff63ffff 64bit]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.0: reg 0x20: [io 0xe880-0xe89f]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.1: reg 0x20: [io 0xe800-0xe81f]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.2: reg 0x20: [io 0xe480-0xe49f]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff63bc00-0xff63bfff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: reg 0x20: [io 0xffa0-0xffaf]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1f.2: PME# supported from D3hot
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:02:00.0: reg 0x10: [mem 0xff2f0000-0xff2fffff 64bit]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: bridge window [mem 0xff200000-0xff2fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: PCI bridge to [bus 03-04]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [io 0x0000-0x0fff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: [1180:0476] type 02 class 0x060700
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: supports D1 D2
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:07.0: [10ec:8139] type 00 class 0x020000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:07.0: reg 0x10: [io 0xd800-0xd8ff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:07.0: reg 0x14: [mem 0xff3ffc00-0xff3ffcff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:07.0: supports D1 D2
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:07.0: PME# supported from D1 D2 D3hot D3cold
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:07.0: System wakeup disabled by ACPI
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1e.0: bridge window [mem 0xff300000-0xff3fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
Aug 14 19:28:33 puppypc17086 user.info kernel: pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
Aug 14 19:28:33 puppypc17086 user.warn kernel: pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:00: on NUMA node 0
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
Aug 14 19:28:33 puppypc17086 user.warn kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Aug 14 19:28:33 puppypc17086 user.info kernel: vgaarb: setting as boot device: PCI:0000:00:02.0
Aug 14 19:28:33 puppypc17086 user.info kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 14 19:28:33 puppypc17086 user.info kernel: vgaarb: loaded
Aug 14 19:28:33 puppypc17086 user.info kernel: vgaarb: bridge control possible 0000:00:02.0
Aug 14 19:28:33 puppypc17086 user.notice kernel: SCSI subsystem initialized
Aug 14 19:28:33 puppypc17086 user.debug kernel: libata version 3.00 loaded.
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: bus type USB registered
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver usbfs
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver hub
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new device driver usb
Aug 14 19:28:33 puppypc17086 user.info kernel: PCI: Using ACPI for IRQ routing
Aug 14 19:28:33 puppypc17086 user.debug kernel: PCI: pci_cache_line_size set to 64 bytes
Aug 14 19:28:33 puppypc17086 user.debug kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: e820: reserve RAM buffer [mem 0x3f7c0000-0x3fffffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Aug 14 19:28:33 puppypc17086 user.info kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Aug 14 19:28:33 puppypc17086 user.info kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Aug 14 19:28:33 puppypc17086 user.notice kernel: amd_nb: Cannot enumerate AMD northbridges
Aug 14 19:28:33 puppypc17086 user.info kernel: Switched to clocksource hpet
Aug 14 19:28:33 puppypc17086 user.notice kernel: FS-Cache: Loaded
Aug 14 19:28:33 puppypc17086 user.info kernel: pnp: PnP ACPI init
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Aug 14 19:28:33 puppypc17086 user.debug kernel: pnp 00:03: Plug and Play ACPI device, IDs SYN0a0e SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [io 0x0250-0x025f] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [io 0x0800-0x087f] could not be reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [io 0x0400-0x041f] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [io 0x0480-0x04bf] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [io 0x0400-0x041f] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [io 0x0250-0x025f] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [mem 0xfec18000-0xfec1ffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:05: [mem 0xfec20000-0xfec27fff] has been reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:06: [mem 0xe0000000-0xe3ffffff] has been reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
Aug 14 19:28:33 puppypc17086 user.info kernel: system 00:07: [mem 0x00100000-0x3f7fffff] could not be reserved
Aug 14 19:28:33 puppypc17086 user.debug kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 14 19:28:33 puppypc17086 user.info kernel: pnp: PnP ACPI: found 8 devices
Aug 14 19:28:33 puppypc17086 user.info kernel: clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03-04] add_size 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 add_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-04] add_size 200000 add_align 100000
Aug 14 19:28:33 puppypc17086 user.warn kernel: pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: bridge window [mem 0xff200000-0xff2fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: PCI bridge to [bus 03-04]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:05:01.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: BAR 0: assigned [mem 0x44000000-0x44000fff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: BAR 15: assigned [mem 0x48000000-0x4bffffff pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: BAR 16: assigned [mem 0x4c000000-0x4fffffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: BAR 13: assigned [io 0xd000-0xd0ff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: BAR 14: assigned [io 0xd400-0xd4ff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: CardBus bridge to [bus 06-09]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: bridge window [io 0xd000-0xd0ff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: bridge window [io 0xd400-0xd4ff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: bridge window [mem 0x48000000-0x4bffffff pref]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:05:01.0: bridge window [mem 0x4c000000-0x4fffffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-06]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
Aug 14 19:28:33 puppypc17086 user.info kernel: pci 0000:00:1e.0: bridge window [mem 0xff300000-0xff3fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:01: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:02: resource 1 [mem 0xff200000-0xff2fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:03: resource 1 [mem 0x40600000-0x407fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:03: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:05: resource 1 [mem 0xff300000-0xff3fffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: resource 0 [io 0xd000-0xd0ff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: resource 1 [io 0xd400-0xd4ff]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: resource 2 [mem 0x48000000-0x4bffffff pref]
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci_bus 0000:06: resource 3 [mem 0x4c000000-0x4fffffff]
Aug 14 19:28:33 puppypc17086 user.info kernel: NET: Registered protocol family 2
Aug 14 19:28:33 puppypc17086 user.info kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: TCP: Hash tables configured (established 8192 bind 8192)
Aug 14 19:28:33 puppypc17086 user.info kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Aug 14 19:28:33 puppypc17086 user.info kernel: NET: Registered protocol family 1
Aug 14 19:28:33 puppypc17086 user.info kernel: RPC: Registered named UNIX socket transport module.
Aug 14 19:28:33 puppypc17086 user.info kernel: RPC: Registered udp transport module.
Aug 14 19:28:33 puppypc17086 user.info kernel: RPC: Registered tcp transport module.
Aug 14 19:28:33 puppypc17086 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 14 19:28:33 puppypc17086 user.debug kernel: pci 0000:00:02.0: Video device with shadowed ROM
Aug 14 19:28:33 puppypc17086 user.debug kernel: PCI: CLS 32 bytes, default 64
Aug 14 19:28:33 puppypc17086 user.info kernel: Trying to unpack rootfs image as initramfs...
Aug 14 19:28:33 puppypc17086 user.info kernel: Freeing initrd memory: 1692K (f7a57000 - f7bfe000)
Aug 14 19:28:33 puppypc17086 user.info kernel: Simple Boot Flag at 0x52 set to 0x1
Aug 14 19:28:33 puppypc17086 user.info kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
Aug 14 19:28:33 puppypc17086 user.notice kernel: Initialise system trusted keyring
Aug 14 19:28:33 puppypc17086 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Aug 14 19:28:33 puppypc17086 user.notice kernel: NFS: Registering the id_resolver key type
Aug 14 19:28:33 puppypc17086 user.notice kernel: Key type id_resolver registered
Aug 14 19:28:33 puppypc17086 user.notice kernel: Key type id_legacy registered
Aug 14 19:28:33 puppypc17086 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 14 19:28:33 puppypc17086 user.info kernel: ntfs: driver 2.1.32 [Flags: R/W].
Aug 14 19:28:33 puppypc17086 user.info kernel: fuse init (API version 7.23)
Aug 14 19:28:33 puppypc17086 user.info kernel: SGI XFS with ACLs, security attributes, realtime, no debug enabled
Aug 14 19:28:33 puppypc17086 user.info kernel: aufs 4.1-20160808
Aug 14 19:28:33 puppypc17086 user.info kernel: alg: No test for crc32 (crc32-table)
Aug 14 19:28:33 puppypc17086 user.info kernel: alg: No test for stdrng (krng)
Aug 14 19:28:33 puppypc17086 user.info kernel: async_tx: api initialized (async)
Aug 14 19:28:33 puppypc17086 user.notice kernel: Key type asymmetric registered
Aug 14 19:28:33 puppypc17086 user.notice kernel: Asymmetric key parser 'x509' registered
Aug 14 19:28:33 puppypc17086 user.info kernel: bounce: pool size: 64 pages
Aug 14 19:28:33 puppypc17086 user.info kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 14 19:28:33 puppypc17086 user.info kernel: io scheduler noop registered
Aug 14 19:28:33 puppypc17086 user.info kernel: io scheduler cfq registered (default)
Aug 14 19:28:33 puppypc17086 user.info kernel: pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
Aug 14 19:28:33 puppypc17086 user.info kernel: pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
Aug 14 19:28:33 puppypc17086 user.info kernel: pcieport 0000:00:1c.2: enabling device (0100 -> 0103)
Aug 14 19:28:33 puppypc17086 user.debug kernel: intel_idle: does not run on family 6 model 14
Aug 14 19:28:33 puppypc17086 user.info kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Lid Switch [LID]
Aug 14 19:28:33 puppypc17086 user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Power Button [PWRB]
Aug 14 19:28:33 puppypc17086 user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Power Button [PWRF]
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Aug 14 19:28:33 puppypc17086 user.info kernel: acpi device:1e: registered as cooling_device0
Aug 14 19:28:33 puppypc17086 user.info kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Aug 14 19:28:33 puppypc17086 user.info kernel: tsc: Marking TSC unstable due to TSC halts in idle
Aug 14 19:28:33 puppypc17086 user.debug kernel: ACPI: acpi_idle registered with cpuidle
Aug 14 19:28:33 puppypc17086 user.info kernel: thermal LNXTHERM:00: registered as thermal_zone0
Aug 14 19:28:33 puppypc17086 user.info kernel: ACPI: Thermal Zone [THRM] (50 C)
Aug 14 19:28:33 puppypc17086 user.info kernel: GHES: HEST is not enabled!
Aug 14 19:28:33 puppypc17086 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 14 19:28:33 puppypc17086 user.notice kernel: intel_rng: FWH not detected
Aug 14 19:28:33 puppypc17086 user.info kernel: Linux agpgart interface v0.103
Aug 14 19:28:33 puppypc17086 user.info kernel: agpgart-intel 0000:00:00.0: Intel 945GM Chipset
Aug 14 19:28:33 puppypc17086 user.info kernel: agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
Aug 14 19:28:33 puppypc17086 user.info kernel: agpgart-intel 0000:00:00.0: detected 8192K stolen memory
Aug 14 19:28:33 puppypc17086 user.info kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Aug 14 19:28:33 puppypc17086 user.info kernel: brd: module loaded
Aug 14 19:28:33 puppypc17086 user.info kernel: loop: module loaded
Aug 14 19:28:33 puppypc17086 user.info kernel: HP CISS Driver (v 3.6.26)
Aug 14 19:28:33 puppypc17086 user.info kernel: nbd: registered device at major 43
Aug 14 19:28:33 puppypc17086 user.info kernel: mtip32xx Version 1.3.1
Aug 14 19:28:33 puppypc17086 user.debug kernel: ata_piix 0000:00:1f.2: version 2.13
Aug 14 19:28:33 puppypc17086 user.info kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Aug 14 19:28:33 puppypc17086 user.info kernel: scsi host0: ata_piix
Aug 14 19:28:33 puppypc17086 user.info kernel: scsi host1: ata_piix
Aug 14 19:28:33 puppypc17086 user.info kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Aug 14 19:28:33 puppypc17086 user.info kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT base driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: Copyright (c) 1999-2008 LSI Corporation
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT SPI Host driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT FC Host driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT SAS Host driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT misc device (ioctl) driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: mptctl: Registered with Fusion MPT base driver
Aug 14 19:28:33 puppypc17086 user.info kernel: mptctl: /dev/mptctl @ (major,minor=10,220)
Aug 14 19:28:33 puppypc17086 user.info kernel: Fusion MPT LAN driver 3.04.20
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci: EHCI PCI platform driver
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci 0000:00:1d.7: debug port 1
Aug 14 19:28:33 puppypc17086 user.debug kernel: ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff63bc00
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 1-0:1.0: USB hub found
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 1-0:1.0: 8 ports detected
Aug 14 19:28:33 puppypc17086 user.info kernel: ehci-platform: EHCI generic platform driver
Aug 14 19:28:33 puppypc17086 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 14 19:28:33 puppypc17086 user.info kernel: ohci-pci: OHCI PCI platform driver
Aug 14 19:28:33 puppypc17086 user.info kernel: ohci-platform: OHCI generic platform driver
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 2-0:1.0: USB hub found
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 2-0:1.0: 2 ports detected
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 3-0:1.0: USB hub found
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 3-0:1.0: 2 ports detected
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 4-0:1.0: USB hub found
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 4-0:1.0: 2 ports detected
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Aug 14 19:28:33 puppypc17086 user.info kernel: uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e400
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 5-0:1.0: USB hub found
Aug 14 19:28:33 puppypc17086 user.info kernel: hub 5-0:1.0: 2 ports detected
Aug 14 19:28:33 puppypc17086 user.info kernel: fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
Aug 14 19:28:33 puppypc17086 user.warn kernel: ^A4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver usb-storage
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-alauda
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-datafab
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums_eneub6250
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-freecom
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-isd200
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-jumpshot
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-realtek
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-sddr09
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-sddr55
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver ums-usbat
Aug 14 19:28:33 puppypc17086 user.info kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Aug 14 19:28:33 puppypc17086 user.info kernel: i8042: Detected active multiplexing controller, rev 1.1
Aug 14 19:28:33 puppypc17086 user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 14 19:28:33 puppypc17086 user.info kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 14 19:28:33 puppypc17086 user.info kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 14 19:28:33 puppypc17086 user.info kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 14 19:28:33 puppypc17086 user.info kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 14 19:28:33 puppypc17086 user.info kernel: mousedev: PS/2 mouse device common for all mice
Aug 14 19:28:33 puppypc17086 user.info kernel: rtc_cmos 00:01: RTC can wake from S4
Aug 14 19:28:33 puppypc17086 user.info kernel: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Aug 14 19:28:33 puppypc17086 user.info kernel: rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
Aug 14 19:28:33 puppypc17086 user.info kernel: md: linear personality registered for level -1
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid0 personality registered for level 0
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid1 personality registered for level 1
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid10 personality registered for level 10
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid6 personality registered for level 6
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid5 personality registered for level 5
Aug 14 19:28:33 puppypc17086 user.info kernel: md: raid4 personality registered for level 4
Aug 14 19:28:33 puppypc17086 user.info kernel: device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
Aug 14 19:28:33 puppypc17086 user.info kernel: sdhci: Secure Digital Host Controller Interface driver
Aug 14 19:28:33 puppypc17086 user.info kernel: sdhci: Copyright(c) Pierre Ossman
Aug 14 19:28:33 puppypc17086 user.info kernel: wbsd: Winbond W83L51xD SD/MMC card interface driver
Aug 14 19:28:33 puppypc17086 user.info kernel: wbsd: Copyright(c) Pierre Ossman
Aug 14 19:28:33 puppypc17086 user.info kernel: VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver vub300
Aug 14 19:28:33 puppypc17086 user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Aug 14 19:28:33 puppypc17086 user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
Aug 14 19:28:33 puppypc17086 user.info kernel: usbcore: registered new interface driver usbhid
Aug 14 19:28:33 puppypc17086 user.info kernel: usbhid: USB HID core driver
Aug 14 19:28:33 puppypc17086 user.info kernel: NET: Registered protocol family 17
Aug 14 19:28:33 puppypc17086 user.notice kernel: Key type dns_resolver registered
Aug 14 19:28:33 puppypc17086 user.info kernel: Using IPI No-Shortcut mode
Aug 14 19:28:33 puppypc17086 user.notice kernel: Loading compiled-in X.509 certificates
Aug 14 19:28:33 puppypc17086 user.notice kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eccedbea871f684e61653ae1afdd36990de1e447'
Aug 14 19:28:33 puppypc17086 user.info kernel: registered taskstats version 1
Aug 14 19:28:33 puppypc17086 user.info kernel: Btrfs loaded
Aug 14 19:28:33 puppypc17086 user.notice kernel: Key type encrypted registered
Aug 14 19:28:33 puppypc17086 user.warn kernel: hd: no drives specified - use hd=cyl,head,sectors on kernel command line
Aug 14 19:28:33 puppypc17086 user.info kernel: rtc_cmos 00:01: setting system clock to 2016-08-14 19:28:04 UTC (1471202884)
Aug 14 19:28:33 puppypc17086 user.info kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Aug 14 19:28:33 puppypc17086 user.inf
Top
backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#252 Post by backi »

As jist proposed ......
I replaced the zdrive and vimlinux from 7.0.3 with the ones from 7.0.1....
and now my internet networks are working again .....

just want to report .
Top
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#253 Post by 666philb »

hi backy

can you post details of the device

menu>>system>>pup-sysinfo 'Devices' tab then 'network'
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Top
backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#254 Post by backi »

▶—— Network Report ——◀

Firewall: On (ip_tables detected)
Network Status: eth0
Wireless Network: No wireless connection

Session Data: Received 0.0 B, Sent 0.0 B
Monthly Data: Received 0 MB, Sent 0 MB

Hostname: puppypc795
Network IP Address:
Domain Name Server (DNS):
Hardware Address (MAC): 00:1A:92:AA:F1:FE


▶TCP/IP Network Interfaces:

eth0 Link encap:Ethernet HWaddr 00:1A:92:AA:F1:FE
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:48 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3744 (3.6 KiB) TX bytes:3744 (3.6 KiB)


▶Kernel IP Routing Table:

Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo


▶Active Internet Connections: (servers and established)

Proto Recv-Q Send-Q Local Address Foreign Address State

tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN


▶Network Protocol Statistics:

Ip:
48 total packets received
0 forwarded
0 incoming packets discarded
48 incoming packets delivered
48 requests sent out
12 outgoing packets dropped

Icmp:
24 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 24
24 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 24

IcmpMsg:
InType3: 24
OutType3: 24

Tcp:
0 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
0 segments received
0 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent

Udp:
0 packets received
24 packets to unknown port received.
0 packet receive errors
24 packets sent

UdpLite:

TcpExt:
0 packet headers predicted

IpExt:
InOctets: 3744
OutOctets: 3744
InNoECTPkts: 48
Top
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#255 Post by 666philb »

hi backi ... not the network tab .... it's the one on the 'devices' tab.. as this shows the device and the kernel driver

Code: Select all

▶—— Network Devices ——◀

Ethernet controller [0200]: Qualcomm Atheros AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
• Kernel Driver: atl1c
• Memory Used: 23.71 KB
• Path: /lib/modules/3.14.54/kernel/drivers/net/ethernet/atheros/atl1c/atl1c.ko
• Driver Version: 1.0.1.1-NAPI
• Description: Qualcom Atheros 100/1000M Ethernet Network Driver

Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
• Kernel Driver: bcma-pci-bridge
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Top
jlst

#256 Post by jlst »

it's definitely a missing module. i have the same problem in my toshiba nb100.

i only see the ethernet driver being loaded, ath5k does not get loaded, because it does not exist..

Aug 14 15:53:07 puppypc30502 user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 14 15:53:07 puppypc30502 user.warn kernel: r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
Aug 14 15:53:07 puppypc30502 user.info kernel: r8169 0000:01:00.0 eth0: RTL8102e at 0xf874e000, 00:1e:33:73:0d:8b, XID 14a00000 IRQ 27

lspci -k

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff1e
Kernel driver in use: r8169
Kernel modules: r8169

02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Askey Computer Corp. WLL3141 (Toshiba PA3613U-1MPC) 802.11bg Wireless Mini PCIe Card
Top
jlst

#257 Post by jlst »

i also see this "error":

Aug 14 15:53:07 puppypc30502 daemon.err kernel: udevd[5936]: failed to execute '/etc/udev/mtp-probe' '/etc/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3 1 2': No such file or directory
Aug 14 15:53:07 puppypc30502 daemon.err kernel: udevd[5938]: failed to execute '/etc/udev/mtp-probe' '/etc/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7 1 3': No such file or directory
Aug 14 15:53:07 puppypc30502 daemon.err kernel: udevd[5935]: failed to execute '/etc/udev/mtp-probe' '/etc/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8 1 4': No such file or directory

it's missing /etc/udev/mtp-probe .. that file is in mpt-runtime

http://packages.ubuntu.com/xenial/libmtp-runtime

the packages to add are: libmtp-common libmtp9 libmtp-runtime ..
Top
dancytron
Posts: 1519
Joined: Wed 18 Jul 2012, 19:20

#258 Post by dancytron »

dancytron wrote:I originally found this on the LXDE version made from Xenialpup 7.01.

http://murga-linux.com/puppy/viewtopic. ... 347#916347

I confirmed the same thing happen in this version.

From my other post:

I just attempted to use the Universal Installer to put lxxenial puppy on a USB drive. I formatted the drive to Ext4 using gparted when prompted to do so in the installer. Then I chose it to do the install and got the following error.

Code: Select all

You need 'Extlinux version 4.x for frugal install on 'ext4' partitions.
In the LXDE version, I confirmed that it worked correctly with an ext3 partition. I didn't test that in this version, but assume it is the same.
Just checked version 7.03. This bug is still present.
Last edited by dancytron on Mon 15 Aug 2016, 06:28, edited 1 time in total.
Top
User avatar
ally
Posts: 1957
Joined: Sat 19 May 2012, 19:29
Location: lincoln, uk
Contact:
Contact ally

#259 Post by ally »

manual frugal install to lenovo x201 ext4

no errors to report yet although it's been a quickie as batch uploading to the archive

looks really nice, will have a more thorough run tomorrow

:)
Top
User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#260 Post by James C »

Just a quick live test pfix=ram on an old dual-core.

All basics,internet,display and sound working and correct on initial boot.

Code: Select all

root# inxi -Fxx
System:    Host: puppypc14832 Kernel: 4.1.30 i686 (32 bit gcc: 5.4.0)
           Desktop: JWM 2.3.5 dm: N/A Distro: xenialpup 7.0.3
Machine:   Mobo: ASRock model: N68-S UCC
           Bios: American Megatrends v: P1.70 date: 03/03/2011
CPU:       Dual core AMD Athlon 64 X2 5200+ (-MCP-) cache: 1024 KB
           flags: (lm nx pae sse sse2 sse3 svm) bmips: 10850
           clock speeds: max: 2712 MHz 1: 2712 MHz 2: 2712 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210]
           bus-ID: 02:00.0 chip-ID: 10de:0a65
           Display Server: X.org 1.18.3 drivers: nouveau (unloaded: vesa)
           tty size: 70x23 Advanced Data: N/A for root
Audio:     Card-1 NVIDIA MCP61 High Definition Audio
           driver: snd_hda_intel bus-ID: 00:05.0 chip-ID: 10de:03f0
           Card-2 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0be3
           Sound: Advanced Linux Sound Architecture v: k4.1.30
Network:   Card: NVIDIA MCP61 Ethernet
           driver: forcedeth port: d480
           bus-ID: 00:07.0 chip-ID: 10de:03ef
           IF: eth0 state: up speed: 100 Mbps duplex: full
           mac: 00:25:22:61:55:fc
Drives:    HDD Total Size: 1250.3GB (1.1% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB serial: N/A
           ID-2: /dev/sdb model: ST3250318AS size: 250.1GB serial: N/A
           ID-1: swap-1 size: 8.49GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           ID-2: swap-2 size: 6.40GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
RAID:      System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 120 Uptime: 9 min Memory: 219.7/4042.0MB
           Init: SysVinit v: N/A runlevel: 5 Gcc sys: N/A
           Client: Shell (bash 4.3.291 running in urxvt) inxi: 2.2.35

Code: Select all

root# free
             total       used       free     shared    buffers     cached
Mem:       4139048     890340    3248708     298844     101328     568840
-/+ buffers/cache:     220172    3918876
Swap:     14540792          0   14540792
Top
Post Reply

Return to “Puppy Projects”