Problem with HP DESKJET F380
Problem with HP DESKJET F380
the printer it's intalled but it's idle, if i send a work to print, it never prints, and give the error hpcups file does not work
here its the last 3 lines of error log after i've installed it for 40th time.
I've intalled hplip 3.16.11
E [08/Feb/2017:19:57:21 +0000] [cups-deviced] PID 6119 (hp) stopped with status 1!
E [08/Feb/2017:19:57:26 +0000] [cups-driverd] Skipping "/usr/share/cups/model/foomatic-ppds/ppd": loop detected!
E [08/Feb/2017:19:57:26 +0000] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
Can anyone help me? i've done everything i know.
here its the last 3 lines of error log after i've installed it for 40th time.
I've intalled hplip 3.16.11
E [08/Feb/2017:19:57:21 +0000] [cups-deviced] PID 6119 (hp) stopped with status 1!
E [08/Feb/2017:19:57:26 +0000] [cups-driverd] Skipping "/usr/share/cups/model/foomatic-ppds/ppd": loop detected!
E [08/Feb/2017:19:57:26 +0000] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
Can anyone help me? i've done everything i know.
First always, always state what version of Puppy you are using.!!!!
Have you followed the procedures shown here?
http://www.murga-linux.com/puppy/viewtopic.php?t=59015
Have you followed the procedures shown here?
http://www.murga-linux.com/puppy/viewtopic.php?t=59015
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
I'm on lucid 5.2.8bigpup wrote:First always, always state what version of Puppy you are using.!!!!
I have... and nothing works.Have you followed the procedures shown here?
http://www.murga-linux.com/puppy/viewtopic.php?t=59015
Hplip pets there are down in that post btw..
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
You should uninstall whatever printer driver you have and start from fresh.
You can use hplip driver Minimum HPLIP version 0.9.9
http://hplipopensource.com/hplip-web/mo ... eries.html
Uninstall the non-working driver/package you installed.
Try one of the hplip pet packages from here
https://archive.org/download/Puppy_Linu ... river_Repo
.
You can use hplip driver Minimum HPLIP version 0.9.9
http://hplipopensource.com/hplip-web/mo ... eries.html
Uninstall the non-working driver/package you installed.
Try one of the hplip pet packages from here
https://archive.org/download/Puppy_Linu ... river_Repo
.
Should i install both or the pet package?perdido wrote:You should uninstall whatever printer driver you have and start from fresh.
You can use hplip driver Minimum HPLIP version 0.9.9
http://hplipopensource.com/hplip-web/mo ... eries.html
Uninstall the non-working driver/package you installed.
Try one of the hplip pet packages from here
https://archive.org/download/Puppy_Linu ... river_Repo
I've got it from hplipopensource.comYou will not tell us where you got the printer driver that does not work.
I'm sorry[/quote]You make it difficult to help.
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
Ok no problem.
Best to stick with the hplip .pet packages that are configured for puppy,
Uninstall the driver package you got from hplipopensource.com
Install a .pet package from https://archive.org/download/Puppy_Linu ... river_Repo
For example https://archive.org/download/Puppy_Linu ... -3.9.2.pet
Any of the following .pet packages should work.
You may have to reboot computer to load driver.
.
Best to stick with the hplip .pet packages that are configured for puppy,
Uninstall the driver package you got from hplipopensource.com
Install a .pet package from https://archive.org/download/Puppy_Linu ... river_Repo
For example https://archive.org/download/Puppy_Linu ... -3.9.2.pet
Any of the following .pet packages should work.
Code: Select all
hplip-2.8.10.pet 07-Aug-2016 17:35 12.7M
hplip-2.8.12.pet 07-Aug-2016 17:35 12.9M
hplip-2.8.2.pet 07-Aug-2016 17:37 11.1M
hplip-2.8.4.pet 07-Aug-2016 17:36 11.8M
hplip-2.8.5.pet 07-Aug-2016 17:41 8.3M
hplip-2.8.6b.pet 07-Aug-2016 17:41 9.2M
hplip-2.8.7.pet 07-Aug-2016 17:40 9.6M
hplip-2.8.9.pet 07-Aug-2016 17:38 10.5M
hplip-3.9.2.pet 07-Aug-2016 17:38 10.9M
.
I'll do it and let you know... Thanks for the moment.perdido wrote:Ok no problem.
Best to stick with the hplip .pet packages that are configured for puppy,
Uninstall the driver package you got from hplipopensource.com
Install a .pet package from https://archive.org/download/Puppy_Linu ... river_Repo
For example https://archive.org/download/Puppy_Linu ... -3.9.2.pet
Any of the following .pet packages should work.You may have to reboot computer to load driver.Code: Select all
hplip-2.8.10.pet 07-Aug-2016 17:35 12.7M hplip-2.8.12.pet 07-Aug-2016 17:35 12.9M hplip-2.8.2.pet 07-Aug-2016 17:37 11.1M hplip-2.8.4.pet 07-Aug-2016 17:36 11.8M hplip-2.8.5.pet 07-Aug-2016 17:41 8.3M hplip-2.8.6b.pet 07-Aug-2016 17:41 9.2M hplip-2.8.7.pet 07-Aug-2016 17:40 9.6M hplip-2.8.9.pet 07-Aug-2016 17:38 10.5M hplip-3.9.2.pet 07-Aug-2016 17:38 10.9M
.
Ok, it keeps telling it's idle, i've sent something to print and nothing.bio3 wrote:I'll do it and let you know... Thanks for the moment.perdido wrote:Ok no problem.
Best to stick with the hplip .pet packages that are configured for puppy,
Uninstall the driver package you got from hplipopensource.com
Install a .pet package from https://archive.org/download/Puppy_Linu ... river_Repo
For example https://archive.org/download/Puppy_Linu ... -3.9.2.pet
Any of the following .pet packages should work.You may have to reboot computer to load driver.Code: Select all
hplip-2.8.10.pet 07-Aug-2016 17:35 12.7M hplip-2.8.12.pet 07-Aug-2016 17:35 12.9M hplip-2.8.2.pet 07-Aug-2016 17:37 11.1M hplip-2.8.4.pet 07-Aug-2016 17:36 11.8M hplip-2.8.5.pet 07-Aug-2016 17:41 8.3M hplip-2.8.6b.pet 07-Aug-2016 17:41 9.2M hplip-2.8.7.pet 07-Aug-2016 17:40 9.6M hplip-2.8.9.pet 07-Aug-2016 17:38 10.5M hplip-3.9.2.pet 07-Aug-2016 17:38 10.9M
.
Here it's the log of today.
E [09/Feb/2017:10:18:13 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
E [09/Feb/2017:16:45:54 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
E [09/Feb/2017:19:31:21 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
E [09/Feb/2017:19:35:03 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
E [09/Feb/2017:19:36:11 +0000] [cups-deviced] PID 8916 (hpfax) stopped with status 127!
E [09/Feb/2017:19:36:12 +0000] [cups-deviced] PID 8918 (hp) stopped with status 127!
E [09/Feb/2017:19:36:32 +0000] [cups-deviced] PID 9225 (hp) stopped with status 127!
E [09/Feb/2017:19:36:32 +0000] [cups-deviced] PID 9223 (hpfax) stopped with status 127!
E [09/Feb/2017:19:36:47 +0000] [cups-driverd] Skipping "/usr/share/cups/model/foomatic-ppds/ppd": loop detected!
E [09/Feb/2017:19:36:48 +0000] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
E [09/Feb/2017:19:42:30 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
But when i go to access log put this
localhost - - [09/Feb/2017:19:27:32 +0000] "POST /jobs HTTP/1.1" 200 140 Cancel-Job successful-ok
localhost - - [09/Feb/2017:19:27:38 +0000] "POST /admin/ HTTP/1.1" 200 53 - -
localhost - - [09/Feb/2017:19:27:38 +0000] "POST /admin/ HTTP/1.1" 200 2264 - -
localhost - - [09/Feb/2017:19:27:39 +0000] "POST /admin/ HTTP/1.1" 200 78 - -
localhost - - [09/Feb/2017:19:27:39 +0000] "POST /admin/ HTTP/1.1" 200 138 CUPS-Delete-Printer successful-ok
localhost - - [09/Feb/2017:19:27:39 +0000] "POST /admin/ HTTP/1.1" 200 2078 - -
localhost - - [09/Feb/2017:19:36:11 +0000] "POST /admin/ HTTP/1.1" 200 14 - -
localhost - - [09/Feb/2017:19:36:11 +0000] "POST / HTTP/1.1" 200 2038 CUPS-Get-Devices -
localhost - - [09/Feb/2017:19:36:11 +0000] "POST /admin/ HTTP/1.1" 200 5256 - -
localhost - - [09/Feb/2017:19:36:32 +0000] "POST /admin/ HTTP/1.1" 200 14 - -
localhost - - [09/Feb/2017:19:36:32 +0000] "POST / HTTP/1.1" 200 2038 CUPS-Get-Devices -
localhost - - [09/Feb/2017:19:36:32 +0000] "POST /admin/ HTTP/1.1" 200 5256 - -
localhost - - [09/Feb/2017:19:36:40 +0000] "POST /admin HTTP/1.1" 200 121 - -
localhost - - [09/Feb/2017:19:36:40 +0000] "POST /admin HTTP/1.1" 200 3352 - -
localhost - - [09/Feb/2017:19:36:47 +0000] "POST /admin HTTP/1.1" 200 278 - -
localhost - - [09/Feb/2017:19:36:47 +0000] "POST / HTTP/1.1" 200 432950 CUPS-Get-PPDs -
localhost - - [09/Feb/2017:19:36:47 +0000] "POST /admin HTTP/1.1" 200 128075 - -
localhost - - [09/Feb/2017:19:36:56 +0000] "POST /admin HTTP/1.1" 200 1906 - -
localhost - - [09/Feb/2017:19:36:56 +0000] "POST /admin/ HTTP/1.1" 200 409 CUPS-Add-Modify-Printer successful-ok
localhost - - [09/Feb/2017:19:36:56 +0000] "POST /admin HTTP/1.1" 200 11319 - -
localhost - - [09/Feb/2017:19:37:01 +0000] "POST /admin HTTP/1.1" 200 277 - -
localhost - - [09/Feb/2017:19:37:01 +0000] "POST /admin/ HTTP/1.1" 200 21364 CUPS-Add-Modify-Printer successful-ok
localhost - - [09/Feb/2017:19:37:01 +0000] "POST /admin HTTP/1.1" 200 2297 - -
localhost - - [09/Feb/2017:19:37:23 +0000] "POST /printers/HP_Deskjet_F300_series HTTP/1.1" 200 469 Print-Job successful-ok
localhost - - [09/Feb/2017:19:44:10 +0000] "POST /printers/HP_Deskjet_F300_series HTTP/1.1" 200 109390 Print-Job successful-ok
localhost - - [09/Feb/2017:19:47:14 +0000] "POST /printers/HP_Deskjet_F300_series HTTP/1.1" 200 469 Print-Job successful-ok
localhost - - [09/Feb/2017:19:53:13 +0000] "POST /printers/HP_Deskjet_F300_series HTTP/1.1" 200 469 Print-Job successful-ok
localhost - - [09/Feb/2017:19:55:20 +0000] "POST /printers/HP_Deskjet_F300_series HTTP/1.1" 200 469 Print-Job successful-ok
I think we're getting close!
sorry i've gone a while...
# Show general information in error_log.
LogLevel warn
SystemGroup lpadmin
# Allow remote access
Port 631
Listen /var/run/cups/cups.sock
# Enable printer sharing and shared printers.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseRemoteProtocols CUPS
BrowseAddress @LOCAL
BrowseLocalProtocols CUPS dnssd
DefaultAuthType Basic
<Location /admin/conf>
AuthType None
# Restrict access to the configuration files...
Order allow,deny
</Location>
<Policy default>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Location />
# Allow shared printing...
Order allow,deny
Allow all
</Location>
<Location /admin>
# Restrict access to the admin pages...
Order allow,deny
</Location>
i've done it with de ppmperdido wrote:How did you uninstall the other package?
here's cupsd.confPlease post the contents of the cupsd.conf file.
It is located in /etc/cups/
.
# Show general information in error_log.
LogLevel warn
SystemGroup lpadmin
# Allow remote access
Port 631
Listen /var/run/cups/cups.sock
# Enable printer sharing and shared printers.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseRemoteProtocols CUPS
BrowseAddress @LOCAL
BrowseLocalProtocols CUPS dnssd
DefaultAuthType Basic
<Location /admin/conf>
AuthType None
# Restrict access to the configuration files...
Order allow,deny
</Location>
<Policy default>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Location />
# Allow shared printing...
Order allow,deny
Allow all
</Location>
<Location /admin>
# Restrict access to the admin pages...
Order allow,deny
</Location>