Puppy : quel noyau choisir ? 3.0.25 et 3.14.55 OK
Puppy : quel noyau choisir ? 3.0.25 et 3.14.55 OK
Puppy : quel noyau choisir ?
Comment switcher les kernels à lire
Un exemple la slaxen 6.3.2 (3.14.55) en test par des pros permettra de se connecter en wifi quand la 6.0 publique ne le peut pas.
Voir le message de dropper et les réponses de Médor sur le fil ici
Tout dépend du matériel utilisé par l'usager, certaines marques de portables réputées comme DELL font des difficultés à nos Puppies (et le tristement célèbre B43, pilote prise de tête)
Chez moi, comme dirait Médor .3.14.94 ou 3.14.55 marchent à merveille sur mon portable Medion P7624 de 2012
Les noyaux produits en Série 4 ne feront pas forcément marveiile.
Personnellement les noyaux 3.14.54 et 3.14.56 sont beaucoup moins intéressants que le 3.14.55 (message subliminal à Argolance) > ToOpPy "Precise" FINAL 170212 avec le noyau 3.14.55 . ah c'est une bonne décision pour que je puisse m'en servir. Mais je ne sais pas ce qu'en penseront ses fidèles.
Noyaux à Bluetooth :
Noyaux à écrans tactiles : La Slaxen de Médor en théorie, pas testée.
Noyaux à clé Wifi :
compilés par rcrsn51 ici, topic essentiel pour les possesseurs d'ordinateurs portables.
Toutou 4.1.2, eh oui !
Toutou 4.3.1 2.6.33.2 cliquer le bleu Lucid 5.2*, Asri 300, Toutou 4.3.1 etc...
3.9.11 nombreuses Puppy : Fluxpup entre autres, et ma ToOpPY 1.0 perso, Precise 5.7.1 Wine des hongrois
Slaxen 6.3.2 et 6.0,
3.4.94 Slacko 5.9.3 lxQtpup 14.12 à voir
slacko_630_changed-k4.1.11.pet (Slegopen)
Racy 3.0.66 2017
Non : 3.2.48 precise 5.7.1 (JL) pas de pet, 3.18.22 Shiba Inu itou.
3.14.20 le pet pas bon ; Pupjibaro 103 Tahrpup 6.0.2 Puppybang Linux
Noyaux pour postes à Galène (du grand-père)
Comment switcher les kernels à lire
Un exemple la slaxen 6.3.2 (3.14.55) en test par des pros permettra de se connecter en wifi quand la 6.0 publique ne le peut pas.
Voir le message de dropper et les réponses de Médor sur le fil ici
Tout dépend du matériel utilisé par l'usager, certaines marques de portables réputées comme DELL font des difficultés à nos Puppies (et le tristement célèbre B43, pilote prise de tête)
Chez moi, comme dirait Médor .3.14.94 ou 3.14.55 marchent à merveille sur mon portable Medion P7624 de 2012
Les noyaux produits en Série 4 ne feront pas forcément marveiile.
Personnellement les noyaux 3.14.54 et 3.14.56 sont beaucoup moins intéressants que le 3.14.55 (message subliminal à Argolance) > ToOpPy "Precise" FINAL 170212 avec le noyau 3.14.55 . ah c'est une bonne décision pour que je puisse m'en servir. Mais je ne sais pas ce qu'en penseront ses fidèles.
Noyaux à Bluetooth :
Noyaux à écrans tactiles : La Slaxen de Médor en théorie, pas testée.
Noyaux à clé Wifi :
compilés par rcrsn51 ici, topic essentiel pour les possesseurs d'ordinateurs portables.
Toutou 4.1.2, eh oui !
Toutou 4.3.1 2.6.33.2 cliquer le bleu Lucid 5.2*, Asri 300, Toutou 4.3.1 etc...
3.9.11 nombreuses Puppy : Fluxpup entre autres, et ma ToOpPY 1.0 perso, Precise 5.7.1 Wine des hongrois
Slaxen 6.3.2 et 6.0,
3.4.94 Slacko 5.9.3 lxQtpup 14.12 à voir
slacko_630_changed-k4.1.11.pet (Slegopen)
Racy 3.0.66 2017
Non : 3.2.48 precise 5.7.1 (JL) pas de pet, 3.18.22 Shiba Inu itou.
3.14.20 le pet pas bon ; Pupjibaro 103 Tahrpup 6.0.2 Puppybang Linux
Noyaux pour postes à Galène (du grand-père)
- Attachments
-
- wlan.jpg
- wlan1 = antenne Wifi
- (73.91 KiB) Downloaded 149 times
-
- exterieur.tar.gz
- synthese Gnumeric pour chez moi
- (6.86 KiB) Downloaded 176 times
Last edited by Pelo on Mon 01 May 2017, 07:40, edited 43 times in total.
Là je suis sur une tarhpup 64 à noyau 3.14.45 (x86 64)
Là je suis sur une tarhpup 64 à noyau 3.14.45 (x86 64)). Rien à gagner avec cette Puppy. Si déjà elle arrive à faire trourner quelques applis 32 bits hyper classiques, ce sera inespéré.
Quant à faire tourner des jeux hyper rapides, il me faudra trouver lesquels. Par contre ma clé Wifi est inutilisable (Itou sur les Xenial Dog et similaires)
Quant à faire tourner des jeux hyper rapides, il me faudra trouver lesquels. Par contre ma clé Wifi est inutilisable (Itou sur les Xenial Dog et similaires)
- Attachments
-
- liberty.jpeg
- Sortez votre Puppy, après avoir chargé la batterie
- (12.27 KiB) Downloaded 116 times
Last edited by Pelo on Sat 08 Apr 2017, 04:38, edited 4 times in total.
Ben t"as pas la pếche, ni les idées claires
Médor.
Code: Select all
root@ToutouPC-007 ~
# inxi -Fxxx
System: Host: ToutouPC-007 Kernel: 3.14.55 i686 (32 bit gcc: 4.8.2)
Desktop: Openbox 3.5.2 info: lxpanel dm: N/A
Distro: Slacko Puppy 6.3.2
Machine: Device: laptop System: FUJITSU SIEMENS product: STYLISTIC ST50XX serial: YBCA016142
Mobo: FUJITSU model: FJPEN18D
BIOS: FUJITSU // Phoenix v: Version 1.05 date: 08/24/2005
Chassis: type: 10 serial: YBCA016142
Battery CMB1: charge: 41.3 Wh 86.0% condition: 48.0/48.0 Wh (100%)
volts: 12.2/10.8
model: Fujitsu CP219405-XX / CP219406-XX Li-ion serial: 1 status: Charging cycles: 0
CPU: Single core Intel Pentium M (-UP-) cache: 2048 KB
flags: (pae sse sse2) bmips: 2200 speed/min/max: 1100/600/1100 MHz
Graphics: Card: Intel 82852/855GM Integrated Graphics Device
bus-ID: 00:02.0 chip-ID: 8086:3582
Display Server: X.org 1.14.3 driver: intel
tty size: 80x24 Advanced Data: N/A for root
Audio: Card-1 Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0 ports: 1800 2080 bus-ID: 00:1f.5 chip-ID: 8086:24c5
Card-2 Pixart Imaging
driver: USB Audio usb-ID: 004-002 chip-ID: 093a:2627
Sound: Advanced Linux Sound Architecture v: k3.14.55
Network: Card-1: Broadcom Limited NetXtreme BCM5788 Gigabit Ethernet
driver: tg3 v: 3.136 bus-ID: 01:0c.0 chip-ID: 14e4:169c
IF: eth0 state: down mac: 00:0b:5d:c9:fa:a0
Card-2: Intel PRO/Wireless 2200BG [Calexico2] Network Connection
driver: ipw2200 v: 1.2.2kmpr bus-ID: 01:0d.0 chip-ID: 8086:4220
IF: eth1 state: down mac: 00:16:6f:24:d1:d0
Card-3: Accton SMCWUSB-G 802.11bg usb-ID: 005-002
IF: N/A state: N/A mac: N/A
Drives: HDD Total Size: 71.0GB (52.6% used)
ID-1: /dev/sda model: FUJITSU_MHV2040A size: 40.0GB serial: N/A
ID-2: USB /dev/sdb model: USB_DISK_2.0 size: 31.0GB
serial: 90006ADE96276A88-0:0
RAID: System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 122 Uptime: 17 days Memory: 90.8/233.4MB
Init: SysVinit v: N/A runlevel: 5 Gcc sys: 4.8.2
Client: Shell (bash 4.2.532 running in sakura) inxi: 2.3.8
root@ToutouPC-007 ~
#
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
La precise 5.7.1 n'a rien pour son pilote 3.14.55 ?
La precise 5.7.1 n'a rien pour son pilote 3.14.55 ?
Medor, peux-tu nous en compiler un ?
Le slacko 3.14.55 ira bien, et il a raison, çà a fonctionné !
Topic MonMedion
Medor, peux-tu nous en compiler un ?
Le slacko 3.14.55 ira bien, et il a raison, çà a fonctionné !
Topic MonMedion
Last edited by Pelo on Fri 03 Mar 2017, 07:58, edited 4 times in total.
@ Pelo Le Troll :
Puppy Precise 5.7.1 posséde d'origine un noyau k3.9.11
Tu ne précises pas le pilote manquant
Médor.
Puppy Precise 5.7.1 posséde d'origine un noyau k3.9.11
Tu ne précises pas le pilote manquant
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
RTL8192Cu ou 8192CU .
RTL8192Cu ou 8192CU .
pour mon besoin perso (antenne CSL300). Sinon je switche le kernel, mais je suis en ToOpPy two two. Je ne veux pas bricoler une Puppy pas encore sortie. Argolance compte sur la collaboration de ses partenaires Toutou. Aidez-le à peaufiner sa Nouvelle version. Merci pour lui..
Slacko 5.6.0 :
Nice one! Experimenting with different Pups is something I don't think I shall ever tire of..... Needless to say, 560 is getting a lot of use at the moment. I'm having fun with it.....and it's very definitely a 'daily driver', since absolutely everything works as it should. Even my NetGear USB wireless adapter, with the rtl8192cu chipset, runs without issue; although I used rcrsn51's re-compiled driver for this in 570, it point-blank refused to behave itself.
pour mon besoin perso (antenne CSL300). Sinon je switche le kernel, mais je suis en ToOpPy two two. Je ne veux pas bricoler une Puppy pas encore sortie. Argolance compte sur la collaboration de ses partenaires Toutou. Aidez-le à peaufiner sa Nouvelle version. Merci pour lui..
Slacko 5.6.0 :
Nice one! Experimenting with different Pups is something I don't think I shall ever tire of..... Needless to say, 560 is getting a lot of use at the moment. I'm having fun with it.....and it's very definitely a 'daily driver', since absolutely everything works as it should. Even my NetGear USB wireless adapter, with the rtl8192cu chipset, runs without issue; although I used rcrsn51's re-compiled driver for this in 570, it point-blank refused to behave itself.
Last edited by Pelo on Fri 17 Mar 2017, 17:40, edited 1 time in total.
Voir le fil de rcrsn51 Realtek RTL8192CU WiFi Drivers for Puppy
Donc pour Puppy Precise k3.9.11, il te faut installer 8192cu_precise571-k3.9.11.pet
Pour ToOpPy 2.2 :
Il me semble qu'Argolance a intégré dans ToOpPy-2.2 le noyau k3.14.55 de Slacko, donc faut installer : 8192cu_slacko_6081-k3.14.55.pet
Mais il te faut en premier blacklister le pilote rtl8192cu d'origine car il doit déjà être chargé
Médor.
Donc pour Puppy Precise k3.9.11, il te faut installer 8192cu_precise571-k3.9.11.pet
Pour ToOpPy 2.2 :
Il me semble qu'Argolance a intégré dans ToOpPy-2.2 le noyau k3.14.55 de Slacko, donc faut installer : 8192cu_slacko_6081-k3.14.55.pet
Mais il te faut en premier blacklister le pilote rtl8192cu d'origine car il doit déjà être chargé
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
merci de l'info. je vais essayer avec ton pet..
merci de l'info. je vais essayer avec ton pet... Du Slacko sur une Precise, je ne suis pas sectaire. J'avais essayé avec celui de rcrsn51! refusé.. Je reviens (là je suis sur la médorette Slaxen 6.3.2. parce que j'ai du travail, en dehors du testage)
le pet 3.9.11 marche impeccable sur la ASRI edu 310 et sur la ToOpPy One 5.7.1..
le pet 3.9.11 marche impeccable sur la ASRI edu 310 et sur la ToOpPy One 5.7.1..
Re: merci de l'info. je vais essayer avec ton pet..
Please explain. Are you saying that the 3.14.55 PET does NOT work in the new ToOpPy? Have you blacklisted the built-in driver?Pelo wrote:refusé...
Hint: Run the command "lsmod | grep 8192". It should JUST show "8192cu".
Noyaux avec besoin 8182cu : pas trouvé
Noyaux avec besoin 8182cu : pas trouvé
3.5.2 Dpup
3.2.29 precise 5.4.2
3.5.2 Dpup
3.2.29 precise 5.4.2
Last edited by Pelo on Fri 17 Mar 2017, 17:43, edited 4 times in total.
- Argolance
- Posts: 3767
- Joined: Sun 06 Jan 2008, 22:57
- Location: PORT-BRILLET (Mayenne - France)
- Contact:
Bonsoir,
My apology for this!
[EDIT]: Update
Cordialement.
In fact, it should! But I forgot to integrate the new pet2tgz to the ToOpPy 2.2 release while I duly did it for the previous 2.1 as system update!rcrsn51 wrote:The 8192cu_slacko_6081-k3.14.55.pet was made with xz compression instead of the old gzip. I suspect that ToOpPy does not recognize these new PETs.
My apology for this!
[EDIT]: Update
Cordialement.
Last edited by Argolance on Sun 26 Feb 2017, 14:24, edited 1 time in total.
Mon antenne Wifi capte, youpi !
Donc on peut utiliser un pilote compilé avec Slacko pour une Precise. Acté.
Mais c'est tant mieux. Mon antenne Wifi capte, tou tou pi tou, youpi !
Mais c'est tant mieux. Mon antenne Wifi capte, tou tou pi tou, youpi !
- Attachments
-
- hotspot.jpg
- Points d'accès
- (69.57 KiB) Downloaded 63 times
Last edited by Pelo on Tue 11 Apr 2017, 15:55, edited 1 time in total.
- Argolance
- Posts: 3767
- Joined: Sun 06 Jan 2008, 22:57
- Location: PORT-BRILLET (Mayenne - France)
- Contact:
ToOpPy 2.2 updateMédor wrote:Sous ToOpPy-2.2 il faut installer la mise à jour que j'ai indiqué ici
Slim x-slacko by mistfire kernel 3.14.56
Slim x-slacko by mistfire kernel 3.14.56 Ben je vais switcher le kernel pour mettre le 3.14.55 pour surfer facile sur le Web.
- Attachments
-
- wifly.jpg
- Une antenne
- (12.35 KiB) Downloaded 31 times
Last edited by Pelo on Tue 04 Apr 2017, 15:28, edited 1 time in total.
Ici j'ai installé la Slacko-6.9.6.4_r4777 noyau k3.14.79 mais on peut passer au k4.10.1
Cependant mes périphériques WiFi fonctionnent à partir de Puppy/Toutou-3.01 k2.6.21.7
Médor.
Cependant mes périphériques WiFi fonctionnent à partir de Puppy/Toutou-3.01 k2.6.21.7
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]
Gagner le bluetooh et perdre wlan1
Souvent le mieux est l'ennemi du bien et complique la vie. Gagner le bluetooh et perdre wlan1, c'est ce qui se passe avec les kernels dernière génération. Le pas riche utilisateur souvent n'a pas d'équipement bluetooh
Itou avec tahrpup qui met des libs QT sans modifier d'un IOTA son menu, menu où des applications demandent ffmpeg qui a été enlevé.
Pour revenir au 3.14.55, je suis dans le flop pour l'instant, aucune efficacité avec mon driver sur la Slacko slip de misty. Je vas verifier avec la Slaxen 6.3.2, celle des testeurs professionnels. Si vous le permettez évidemment.
'on n'est pas là pour se faire engueuler', chantait Philippe Clay. Des fois j'ai des doutes sur l'esprit libertaire de GNU LInux, du moins de ceux qui s'y collent.
Itou avec tahrpup qui met des libs QT sans modifier d'un IOTA son menu, menu où des applications demandent ffmpeg qui a été enlevé.
Pour revenir au 3.14.55, je suis dans le flop pour l'instant, aucune efficacité avec mon driver sur la Slacko slip de misty. Je vas verifier avec la Slaxen 6.3.2, celle des testeurs professionnels. Si vous le permettez évidemment.
'on n'est pas là pour se faire engueuler', chantait Philippe Clay. Des fois j'ai des doutes sur l'esprit libertaire de GNU LInux, du moins de ceux qui s'y collent.
Conclusion logique de ce fil :
Choisir la distro possédant le noyau qui supporte tout votre matériel
Médor.
Choisir la distro possédant le noyau qui supporte tout votre matériel
Médor.
[b][url=http://wellminded.net63.net/]Recherches Puppy[/url]|[url=http://puppylinux.org/wikka/PageIndex]Index Puppy[/url]|[url=http://smokey01.com/bruceb/france.html]Index FR[/url]|[url=http://toutoulinux.free.fr/tuto.php]Tuto Toutou[/url][/b]