tahrpup 6.0.5 CE
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
fpm2 problem
A few days ago, I started using tahr 6.0.6
When I use fpm2 password manager, I was accustomed to having the password for a URL copied when I clicked the appropriate menu item, so I could then paste it into the field on the Web form.
That doesn't work anymore.
Thank you,
Sheldon
When I use fpm2 password manager, I was accustomed to having the password for a URL copied when I clicked the appropriate menu item, so I could then paste it into the field on the Web form.
That doesn't work anymore.
Thank you,
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
sfs_loat v3.0 does not append extra files to LASTUNIONRECORD
sfs_loat v3.0 in the tahrpup-6.0.6 does append the extra sfs to EXTRASFSLIST, but does not to LASTUNIONRECORD in /etc/rc.d/BOOTCONFIG.
See
http://www.murga-linux.com/puppy/viewto ... 481#944481
See
http://www.murga-linux.com/puppy/viewto ... 481#944481
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Re: pwidgets
bumptlchost wrote:Tahr 6.0.6 32 bit running as bootabable USB.
Pwidgets does not install/run ... Is this a known problem, or have I done something to offend the Linux Ghods?
Any help appreciated.
no sound
tahr 32 bit 6.0.6 running as bootable usb (mode 13)
No sound
psi reports:
Audio device
• NVIDIA Corporation Device
• VendorID=10de DeviceID=0fbc Rev=a1
• Kernel Driver=snd_hda_intel
Audio device
• Intel Corporation Sunrise Point-H HD Audio
• VendorID=8086 DeviceID=a170 Rev=31
• Kernel Driver=snd_hda_intel
Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
• Kernel Driver: snd_hda_intel
• Memory Used: 27.65 KB
• Path: /lib/modules/3.14.79/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
• Kernel Driver: snd_hda_intel
• Memory Used: 27.65 KB
• Path: /lib/modules/3.14.79/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
Any idea/hints/fixes?
Yes, there is sound in windows 7
No sound
psi reports:
Audio device
• NVIDIA Corporation Device
• VendorID=10de DeviceID=0fbc Rev=a1
• Kernel Driver=snd_hda_intel
Audio device
• Intel Corporation Sunrise Point-H HD Audio
• VendorID=8086 DeviceID=a170 Rev=31
• Kernel Driver=snd_hda_intel
Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
• Kernel Driver: snd_hda_intel
• Memory Used: 27.65 KB
• Path: /lib/modules/3.14.79/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
• Kernel Driver: snd_hda_intel
• Memory Used: 27.65 KB
• Path: /lib/modules/3.14.79/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
Any idea/hints/fixes?
Yes, there is sound in windows 7
Menu->Setup->ALSA Sound Wizard
Check settings in Adjust Levels
Make sure PCM is selected and turned up.
If no help.
Multiple Cards
See if more than one device is listed.
If yes.
Try selecting a different device.
Check settings in Adjust Levels
Make sure PCM is selected and turned up.
If no help.
Multiple Cards
See if more than one device is listed.
If yes.
Try selecting a different device.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
triedd everything you suggested...still no sound...so I can call it TAHR-MUTEbigpup wrote:Menu->Setup->ALSA Sound Wizard
Check settings in Adjust Levels
Make sure PCM is selected and turned up.
If no help.
Multiple Cards
See if more than one device is listed.
If yes.
Try selecting a different device.
Just stumbled onto this thread by way of exFAT issues.augras wrote:Hi,
a exfat .pet all in one for old 32bits puppies that includes the files that mavrothal has modified and the new exfat-1.2.4-i686-20160626-trusty.pet by jlst few posts above.
I have tried on tahrpup605 NOPAE, raring3.9.9.2, TritonPrecise7.7.3, AsriEdu310 NOPAE, Slacko32-5.9.3, SlaXen6.0 (doesn't work with ToOpPyprecise2.0 ! ).
Please test in ram : the old files are replace and not saved... you can't go back if doesn't work.
Thanks again to mavrothal, and to jlst.
Philippe
Thanks for making the .pet for exFAT support. I tried it, and it worked as expected for making exFAT drive icon appear, and mount/unmount with point and click.
However, there was one undesired action I noticed on reboot.(was running on a copy of a backed up save file)
This PC has an internal media reader, and normally empty card slots do not spawn drive icons in Puppy. But upon reboot with this exFAT fix applied, those 4 empty slots generated 4 drive icons. And clicking on them brought up PMount where they showed, falsely, as being exFAT.
I remember seeing one entry in the code changes on Git, and tried a quick fix by commenting out the 3 lines from the /sbin/probepart code change below:
Code: Select all
118 + if [ "$FSTYPE" = "unknown" -a "$fdisk -l /dev/$DEVICE |grep exFAT)" != "" ];then
119 + FSTYPE="exfat"
120 + fi
Hi,
Just for a feed back : I have on one computer a card reader, just for one card, and there is not this problem.
The scripts are from mavrothal and jlst and i just put them all together in one .pet file to make it easier : i can't solve this problem and not say if your solution is the solution.
But i think mavrothal will see your post.
Philippe
Just for a feed back : I have on one computer a card reader, just for one card, and there is not this problem.
The scripts are from mavrothal and jlst and i just put them all together in one .pet file to make it easier : i can't solve this problem and not say if your solution is the solution.
But i think mavrothal will see your post.
Philippe
Yeah, I also tried the exFAT changes on a laptop with a single SD card reader and the phantom drive did not show up. However, a new phantom drive showed up for a FreeBSD partition on a logical drive sda10, which did not show up before. That is formatted UFS, but PMount falsely shows it as exFAT. So I think that is another unintended consequence of defaulting unknown to exFAT. EDIT: Also noticed that Extended partition shows up as another phantom drive without those 3 lines commented as well.augras wrote:Just for a feed back : I have on one computer a card reader, just for one card, and there is not this problem.
Again, I don't understand the whole code or the interactions and dependencies, I just saw those 3 lines and commented out to test, and it appears to alleviate the phantom drive issues.
Last edited by jd7654 on Thu 02 Mar 2017, 23:06, edited 1 time in total.
nope, no sound until i rebooted.tlchost wrote:But, shouldn' the play test sound work when a card is selected without having to save?number698 wrote:NB : I fnd with my 2 sound-card system, after changing devices - i need to save/reboot for the switch to take effect.
If so, then I truly have TAHR-MUTE 6.0.6
Tahrpup 6.0.5
Hi. I do enjoy a working WIFI connection with my Laptop using Tahrpup 6.0.5.
Is there any way to find out what specific firmware is needed for my personal laptop, in order to get access to the Internet by “WIFI
Is there any way to find out what specific firmware is needed for my personal laptop, in order to get access to the Internet by “WIFI
Tahrpup 6.0.5
Hi.
I have changed the color of the desktop-background and would like to know how to change the desktop-fonts-color from black to white ? How do I do this ? I am using the Blue-Moon Them, by the way.
Thank you all for your help.
I have changed the color of the desktop-background and would like to know how to change the desktop-fonts-color from black to white ? How do I do this ? I am using the Blue-Moon Them, by the way.
Thank you all for your help.
Tahrpup 6.0.5
Hi. I would like to remove not only all the games but also the “FUN
Tahrpup 6.0.5
Hi. I would like to know what happens, when I remove applications in Tahrpup with the “ Setup/Remove-build-in-packages-tool “. Are “all
Tahrpup 6.0.5
Hi.
I would like to know, how can those Osmo-pop-up- day- notes be disabled ?
No, better yet, how can they be remove from Tahrpup ?
Osmo shows already, what needs to be done on a given day. I don’t need a second reminder .
Thank you for your help.
I would like to know, how can those Osmo-pop-up- day- notes be disabled ?
No, better yet, how can they be remove from Tahrpup ?
Osmo shows already, what needs to be done on a given day. I don’t need a second reminder .
Thank you for your help.
-
- Posts: 1543
- Joined: Mon 22 Feb 2016, 19:43
Re: Tahrpup 6.0.5
There's something here called "zdrv cutter", but v0.4 (detect firmware) is not available yet:TIW wrote:If one could single out the specific firmware needed for ones personal computer those other firmware -files could be delete and therefor decrease the size of Tahrpup installation. Hence my question : Is there any way to find out what firmware is needed ... ?
Thank you very much for your time and interest.
http://www.murga-linux.com/puppy/viewtopic.php?t=51552
If technosaurus could release v0.4 (v0.3 was the last released in 2010 I think?) that would be great!
TIW wrote:Hi. I would like to remove not only all the games but also the “FUN
- Attachments
-
- fixmenus2.pet
- (1.91 KiB) Downloaded 150 times
Re: Tahrpup 6.0.5
[quote="TIW"]Hi. I would like to know what happens, when I remove applications in Tahrpup with the “ Setup/Remove-build-in-packages-tool “. Are “all
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)