Quirky Xerus 8.6 (Aug. 16), Beaver 8.7.1 (Sept. 21), 2018
And it runs nicely on my wacom system except for the Wacom Settings Utility (missing naturally) and needed to set the pen accuracy and extra buttons on the pen and drawing 'tablet'. I'm trying to get one up for me and you as the current one was created and last modified some 7 years ago so the source code has just about dissapeared. Replacement is suppose to use xsetwacom which is installed, but it doesn't return the data it should so something has come admiss. Maybe it's time I learn't dialog? and built a frontend myself.
Came across an online radio streamer at https://github.com/lubosz/radiotray which may be worth adding next time, small and low cpu powered and extremely easy to add new stations on the fly.
Only problem found with it so far is that src2pkg for some reason. I've left a message on the thread asking amigo's help. I find it too usefull to loose if I can help it.
Oh, and everyone, please remember that Quirky was setup and still is (I think) for playing with, not just the standard 'this is how it is to be' stuff!
regards to all
Came across an online radio streamer at https://github.com/lubosz/radiotray which may be worth adding next time, small and low cpu powered and extremely easy to add new stations on the fly.
Only problem found with it so far is that src2pkg for some reason. I've left a message on the thread asking amigo's help. I find it too usefull to loose if I can help it.
Oh, and everyone, please remember that Quirky was setup and still is (I think) for playing with, not just the standard 'this is how it is to be' stuff!
regards to all
Last edited by scsijon on Sat 29 Jul 2017, 22:42, edited 1 time in total.
Well, continue grumbling to your heart's content, then.Sage wrote:Been using Quirky since inception, m. Probably manage without the lecture, thanks.The Quirky concept is different from the Puppy concept. It looks like a
Puppy, but it isn't.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
Hi Musher,musher0 wrote:....
Downloaded your urxvt-9.2 for Quirky (thank you ), and I cannot remember how to get the fading/transparency to work. I know its probably something simple, but right now I am too stupid to figure it out and/or remember it, lol. As a side note, I do have "qiv" installed, with your modifications inserted into "xinitrc", and thus my conky looks absolutely beautiful & transparent . But how do I get your urxvt to do the same thing with its fading and transparency capacities? Dar# it!, I did it before in our Dpup-Stretches we both made, but now I cannot remember. Getting old
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
pEqualizer is still faulty
When pEqualizer is launched, faders in the "Flat" position
are all down at the bottom.
They should be at 65.
Can someone do a permanent fix for this problem.
Thanks.
are all down at the bottom.
They should be at 65.
Can someone do a permanent fix for this problem.
Thanks.
frugal install will freeze the screen
Using my lenovo desktop dual core with 2GB of ram will fail to do a frugal install on sda3 (ext4).
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Add up:
The frugal installation was started via the 'install' icon on the desktop.
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Add up:
The frugal installation was started via the 'install' icon on the desktop.
Last edited by FeodorF on Sat 29 Jul 2017, 21:50, edited 1 time in total.
Re: frugal install will freeze the screen
Hi Feodor,FeodorF wrote:Using my lenovo desktop dual core with 2GB of ram will fail to do a frugal install on sda3 (ext4).
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Don't use the "install script" if you are doing frugal install. Make a folder (name it whatever you want), mount the Quirky 8.3 ISO you downloaded, copy from it the initrd.q, qsfs and vmlinuz into your folder, then use your grub4dos (or install it) and make the appropriate entry like this:
---- if it is the sole thing on the device, then this is fine:
title Puppy slacko 5.7.1 (sd#1)
find --set-root --ignore-floppies --ignore-cd /"yor-folder-name"/puppy_slacko_5.7.1.sfs
kernel /"your folder name"/vmlinuz pmedia=usbflash pfix=fsck
initrd /"your-folder-name"/initrd.gz
...or, if it is sharing with other frugal installed pups on that partition, make your grub4dos entry like this:
title Quirky-Xerus-8.3 (sd#1)
kernel /"your-folder-name"/vmlinuz install_specs=UUID="find-your-UUID-for-that-partition":ext4:"your-folder-name"
initrd /"your-folder-name"/initrd.q
Follow this and you'll be good to go...I've been frugal installing and running Quirky 8.1.94 thru 8.3 across a wide range of devices.
Hello all.
I noticed that there is a typo in file MRUF-lst.desktop that prevents the
desktop icon from running it.
To rectify, please use the following command line in terminal:If you wish to check (optional), type
Once that's done, it will run fine.
BFN.
I noticed that there is a typo in file MRUF-lst.desktop that prevents the
desktop icon from running it.
To rectify, please use the following command line in terminal:
Code: Select all
# To do the required edit
replaceit --input=/usr/share/applications/MRUF-lst.desktop "MRUF-lst" "mruf-lst" "{Exec"
Code: Select all
# To check (optional)
more /usr/share/applications/MRUF-lst.desktop
BFN.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
musher0 wrote:Hello all.
I noticed that there is a typo in file MRUF-lst.desktop that prevents the
desktop icon from running it.
To rectify, please use the following command line in terminal:If you wish to check (optional), typeCode: Select all
# To do the required edit replaceit --input=/usr/share/applications/MRUF-lst.desktop "MRUF-lst" "mruf-lst" "{Exec"
Once that's done, it will run fine.Code: Select all
# To check (optional) more /usr/share/applications/MRUF-lst.desktop
BFN.
Musher, did you maybe overlook this??:
http://www.murga-linux.com/puppy/viewto ... &start=630
3/4s of the page down....
Quirky Xerus 8.3 for x86_64, released July 29, 2017
Booted from the live DVD and installed to a 32gb usb-3.0 flash drive:
# inxi -b
System: Host: puppypc14107 Kernel: 4.11.12 x86_64 (64 bit) Desktop: JWM git-976 Distro: Quirky 8.3 xerus64
Machine: System: Hewlett-Packard product: p7-1246s serial: MXX232077R
Mobo: Foxconn model: 2ADA v: 1.00 Bios: AMI v: 7.12 date: 06/07/2012
CPU: Quad core Intel Core i5-3550 (-MCP-) speed/max: 1600/3301 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.org 1.18.4 driver: nvidia tty size: 146x27 Advanced Data: N/A for root
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 2031.9GB (0.3% used)
Info: Processes: 153 Uptime: 1:29 Memory: 268.9/12040.8MB Client: Shell (bash) inxi: 2.2.35
#
video-info-glx 1.5.3 Sat 29 Jul 2017 on Quirky Xerus64 8.3 Linux 4.11.12 x86_64
0.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
oem: NVIDIA
product: GF108 Board - 1071v1p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1920x1080 pixels (707x392 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2
OpenGL core profile version string: 4.5.0 NVIDIA 375.82
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
Works well, thanks.
P.S.
I did the speed test with a 32gb Kingston Data Traveler 3.0 plugged
into a usb-3.0 port:
# sync
# #echo 3 > /proc/sys/vm/drop_caches
# dd if=/dev/zero of=/dummyfile bs=1M count=1024 conv=fdatasync oflag=direct
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 13.504 s, 79.5 MB/s
#
# inxi -b
System: Host: puppypc14107 Kernel: 4.11.12 x86_64 (64 bit) Desktop: JWM git-976 Distro: Quirky 8.3 xerus64
Machine: System: Hewlett-Packard product: p7-1246s serial: MXX232077R
Mobo: Foxconn model: 2ADA v: 1.00 Bios: AMI v: 7.12 date: 06/07/2012
CPU: Quad core Intel Core i5-3550 (-MCP-) speed/max: 1600/3301 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.org 1.18.4 driver: nvidia tty size: 146x27 Advanced Data: N/A for root
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 2031.9GB (0.3% used)
Info: Processes: 153 Uptime: 1:29 Memory: 268.9/12040.8MB Client: Shell (bash) inxi: 2.2.35
#
video-info-glx 1.5.3 Sat 29 Jul 2017 on Quirky Xerus64 8.3 Linux 4.11.12 x86_64
0.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
oem: NVIDIA
product: GF108 Board - 1071v1p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1920x1080 pixels (707x392 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2
OpenGL core profile version string: 4.5.0 NVIDIA 375.82
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
Works well, thanks.
P.S.
I did the speed test with a 32gb Kingston Data Traveler 3.0 plugged
into a usb-3.0 port:
# sync
# #echo 3 > /proc/sys/vm/drop_caches
# dd if=/dev/zero of=/dummyfile bs=1M count=1024 conv=fdatasync oflag=direct
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 13.504 s, 79.5 MB/s
#
- Attachments
-
- screenshot.jpg
- (86.82 KiB) Downloaded 1507 times
Hi, belham2.belham2 wrote:Musher, did you maybe overlook this??:musher0 wrote:Hello all.
I noticed that there is a typo in file MRUF-lst.desktop that prevents the
desktop icon from running it.
To rectify, please use the following command line in terminal:If you wish to check (optional), typeCode: Select all
# To do the required edit replaceit --input=/usr/share/applications/MRUF-lst.desktop "MRUF-lst" "mruf-lst" "{Exec"
Once that's done, it will run fine.Code: Select all
# To check (optional) more /usr/share/applications/MRUF-lst.desktop
BFN.
http://www.murga-linux.com/puppy/viewto ... &start=630
3/4s of the page down....
Sorry, can't find what you mean.
What happened is that Barry regrouped the files of my MRUF in a
more condensed hierarchy -- which makes sense since this is
published as a stand-alone app in Quirky. I'm fine with it.
Except the exec in /usr/bin is mruf-lst and in MRUF-lst.desktop, it had
been entered as "Exec=MRUF-lst". So of course the script didn't
launch from the *.desktop file.
It's lucky that I checked. Anyway, no big deal, it was just a typo --
everybody does them once in a while -- and now it's corrected.
~~~~~~~~~~~
On another subject, I ditched Xine in Quirky and installed mpv +
SMplayer. This combination has to be the smallest GUI media player.
BFN.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
musher0 wrote:Hi, belham2.belham2 wrote:Musher, did you maybe overlook this??:musher0 wrote:Hello all.
I noticed that there is a typo in file MRUF-lst.desktop that prevents the
desktop icon from running it.
To rectify, please use the following command line in terminal:If you wish to check (optional), typeCode: Select all
# To do the required edit replaceit --input=/usr/share/applications/MRUF-lst.desktop "MRUF-lst" "mruf-lst" "{Exec"
Once that's done, it will run fine.Code: Select all
# To check (optional) more /usr/share/applications/MRUF-lst.desktop
BFN.
http://www.murga-linux.com/puppy/viewto ... &start=630
3/4s of the page down....
Sorry, can't find what you mean.
What happened is that Barry regrouped the files of my MRUF in a
more condensed hierarchy -- which makes sense since this is
published as a stand-alone app in Quirky. I'm fine with it.
Except the exec in /usr/bin is mruf-lst and in MRUF-lst.desktop, it had
been entered as "Exec=MRUF-lst". So of course the script didn't
launch from the *.desktop file.
It's lucky that I checked. Anyway, no big deal, it was just a typo --
everybody does them once in a while -- and now it's corrected.
~~~~~~~~~~~
On another subject, I ditched Xine in Quirky and installed mpv +
SMplayer. This combination has to be the smallest GUI media player.
BFN.
Hi Musher,
The page before this one (Number 43), three-quarters of the page down, I posted this:
"belham2
Joined: 15 Aug 2016
Posts: 818
PostPosted: Today, at 11:51 Post subject:
Hi Musher,
Downloaded your urxvt-9.2 for Quirky (thank you Wink), and I cannot remember how to get the fading/transparency to work. I know its probably something simple, but right now I am too stupid to figure it out and/or remember it, lol. As a side note, I do have "qiv" installed, with your modifications inserted into "xinitrc", and thus my conky looks absolutely beautiful & transparent Smile . But how do I get your urxvt to do the same thing with its fading and transparency capacities? Dar# it!, I did it before in our Dpup-Stretches we both made, but now I cannot remember. Getting old "
I still can't figure it out, and I know when you tell me I am going to curse myself.
Hi belham2.
I had very little sleep last night so my perception is not the best
today, sorry.
About the fading and transparency in urxvt:
to get transparency, we use the -tr parameter.
-tr turns it on, +tr turns it off.
We can shade it with the -sh parameter.
-sh 0 means opaque (no transparency),
-sh 99 means full transparency,
but you can go to 255 (except well before that you won't be able to
read anything !)
-sh 50, -sh 25, -sh 75 are all good, depending on the effect you want
to achieve.
Now here's something interesting: if you use, say, -sh 111
the shading color (the parameter -tint; more about it in a minute)
puts a kind of "frost" over your window. Depending on what your
background picture is, it can produce a beautiful effect.
Now the shading color, called by the -tint #some-color parm.
You can use the color names in /usr/share/X11/rgb.txt (they are the
same as in the box at the bottom of gcolor2), e.g. -tint cornsilk
or
hex colors such as #f0e9a5. The hex colors you have to put in English
quotation marks (see PS at bottom of this post), e.g. "#f0e9a5".
The fading is achieved by the -fade and -fadecolor parameters.
For example: -fade 70 -fadecolor "#f0e9a5"
-fade 70 means "fading at 70 %". Fading goes into effect when you
leave your urxvt window to focus on another window, say, your editor.
When not in focus, with the -fade parm, the console window will pale
a bit, so you know it's not in focus.
I hope this answers your question.
BFN.
~~~~~~~~~~~~~~~
As an example, if you want to sink your teeth in a script that opens a
urxvt terminal: voilà mon ami !
Enjoy!
~~~~~~~~~~~
PS.
English quotation marks : " ".
French quotation marks: « ».
German quotation marks: ' '.
I had very little sleep last night so my perception is not the best
today, sorry.
About the fading and transparency in urxvt:
to get transparency, we use the -tr parameter.
-tr turns it on, +tr turns it off.
We can shade it with the -sh parameter.
-sh 0 means opaque (no transparency),
-sh 99 means full transparency,
but you can go to 255 (except well before that you won't be able to
read anything !)
-sh 50, -sh 25, -sh 75 are all good, depending on the effect you want
to achieve.
Now here's something interesting: if you use, say, -sh 111
the shading color (the parameter -tint; more about it in a minute)
puts a kind of "frost" over your window. Depending on what your
background picture is, it can produce a beautiful effect.
Now the shading color, called by the -tint #some-color parm.
You can use the color names in /usr/share/X11/rgb.txt (they are the
same as in the box at the bottom of gcolor2), e.g. -tint cornsilk
or
hex colors such as #f0e9a5. The hex colors you have to put in English
quotation marks (see PS at bottom of this post), e.g. "#f0e9a5".
The fading is achieved by the -fade and -fadecolor parameters.
For example: -fade 70 -fadecolor "#f0e9a5"
-fade 70 means "fading at 70 %". Fading goes into effect when you
leave your urxvt window to focus on another window, say, your editor.
When not in focus, with the -fade parm, the console window will pale
a bit, so you know it's not in focus.
I hope this answers your question.
BFN.
~~~~~~~~~~~~~~~
As an example, if you want to sink your teeth in a script that opens a
urxvt terminal: voilà mon ami !
Code: Select all
#!/bin/sh
# $MBINS/console-hdr2.sh
#### set -xe
# Variables
GEOM="g 85x22+240+140" # position
COLR="bg black -fg snow" # couleurs
# ICN="icon /usr/share/pixmaps/puppy/terminal.svg" # icône # Sert à quoi ?
CADR="b 18 -sr ";TITR="Terminal urxvt"
WDWMNGR="`cat /etc/windowmanager`"
TRNSP="tr -tint AntiqueWhite1 -sh 40" # -$TRNSP
# transparence pas active avec les taquets perl, on dirait.
FNT="fn xft:Monaco:pixelsize=14:antialias=true:autohint=true" # fonte
FadE="fade 70 -fadecolor "#94A495""
#
#if [ "`urxvt -pe &>/dev/nul;echo $?`" = "0" ];then
TAQT="pe tabbed -tab-fg 15 -tab-bg 9 -tabbar-bg 6"
# Si on a un urxvt avec une capacité de perl.
# Couleurs des taquets : 1 rouge # 4 bleu # 7 gris
# -tab-bg 0" # taquets
PARAM="$CADR -$GEOM -$FNT -$COLR -$TRNSP -$FadE"
#else
# Sinon :
# PARAM="$CADR -$GEOM -$FNT -$COLR -$TRNSP"
#fi
#
psawk () { ps | awk '$6 ~ /tabbed/ { print $1 }' | head -1; }
# Action
case ${WDWMNGR:0:3} in
wmx)kill -s 15 `psawk` &>/dev/null || urxvt -$TAQT -cd $PWD -T "$TITR" -$PARAM &>/dev/null & ;;
# ps a | awk '$0 ~ /Terminal urxvt/ && $5=="urxvt" { print $1 }'`
*)wmctrl -c "$TITR" || urxvt -cd $PWD -T "$TITR" -$PARAM &>/dev/null & ;;
# wmctrl plus "doux" mais inefficace sous wmx
esac
####
# Ne pas oublier de remplacer xterm dans ROX-Filer par
# urxvt -b 18 -fn xft:Monaco:pixelsize=15:antialias=true:hinting=true -g 80x22+240+140 -bg black -fg snow -tr -tint AntiqueWhite2 -sh 101 &>/dev/null
# set +xe
~~~~~~~~~~~
PS.
English quotation marks : " ".
French quotation marks: « ».
German quotation marks: ' '.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
musher0 wrote:Hi belham2.
I had very little sleep last night so my perception is not the best
today, sorry.
About the fading and transparency in urxvt:
to get transparency, we use the -tr parameter.
-tr turns it on, +tr turns it off.
We can shade it with the -sh parameter.
-sh 0 means opaque (no transparency),
-sh 99 means full transparency,
but you can go to 255 (except well before that you won't be able to
read anything !)
-sh 50, -sh 25, -sh 75 are all good, depending on the effect you want
to achieve.
Now here's something interesting: if you use, say, -sh 111
the shading color (the parameter -tint; more about it in a minute)
puts a kind of "frost" over your window. Depending on what your
background picture is, it can produce a beautiful effect.
Now the shading color, called by the -tint #some-color parm.
You can use the color names in /usr/share/X11/rgb.txt (they are the
same as in the box at the bottom of gcolor2), e.g. -tint cornsilk
or
hex colors such as #f0e9a5. The hex colors you have to put in English
quotation marks (see PS at bottom of this post), e.g. "#f0e9a5".
The fading is achieved by the -fade and -fadecolor parameters.
For example: -fade 70 -fadecolor "#f0e9a5"
-fade 70 means "fading at 70 %". Fading goes into effect when you
leave your urxvt window to focus on another window, say, your editor.
When not in focus, with the -fade parm, the console window will pale
a bit, so you know it's not in focus.
I hope this answers your question.
BFN.
~~~~~~~~~~~~~~~
As an example, if you want to sink your teeth in a script that opens a
urxvt terminal: voilà mon ami !Enjoy!Code: Select all
#!/bin/sh # $MBINS/console-hdr2.sh #### set -xe # Variables GEOM="g 85x22+240+140" # position COLR="bg black -fg snow" # couleurs # ICN="icon /usr/share/pixmaps/puppy/terminal.svg" # icône # Sert à quoi ? CADR="b 18 -sr ";TITR="Terminal urxvt" WDWMNGR="`cat /etc/windowmanager`" TRNSP="tr -tint AntiqueWhite1 -sh 40" # -$TRNSP # transparence pas active avec les taquets perl, on dirait. FNT="fn xft:Monaco:pixelsize=14:antialias=true:autohint=true" # fonte FadE="fade 70 -fadecolor "#94A495"" # #if [ "`urxvt -pe &>/dev/nul;echo $?`" = "0" ];then TAQT="pe tabbed -tab-fg 15 -tab-bg 9 -tabbar-bg 6" # Si on a un urxvt avec une capacité de perl. # Couleurs des taquets : 1 rouge # 4 bleu # 7 gris # -tab-bg 0" # taquets PARAM="$CADR -$GEOM -$FNT -$COLR -$TRNSP -$FadE" #else # Sinon : # PARAM="$CADR -$GEOM -$FNT -$COLR -$TRNSP" #fi # psawk () { ps | awk '$6 ~ /tabbed/ { print $1 }' | head -1; } # Action case ${WDWMNGR:0:3} in wmx)kill -s 15 `psawk` &>/dev/null || urxvt -$TAQT -cd $PWD -T "$TITR" -$PARAM &>/dev/null & ;; # ps a | awk '$0 ~ /Terminal urxvt/ && $5=="urxvt" { print $1 }'` *)wmctrl -c "$TITR" || urxvt -cd $PWD -T "$TITR" -$PARAM &>/dev/null & ;; # wmctrl plus "doux" mais inefficace sous wmx esac #### # Ne pas oublier de remplacer xterm dans ROX-Filer par # urxvt -b 18 -fn xft:Monaco:pixelsize=15:antialias=true:hinting=true -g 80x22+240+140 -bg black -fg snow -tr -tint AntiqueWhite2 -sh 101 &>/dev/null # set +xe
~~~~~~~~~~~
PS.
English quotation marks : " ".
French quotation marks: « ».
German quotation marks: ' '.
Thanks, Musher!
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: frugal install will freeze the screen
Hmmm, I did test that frugal install works. I booted 8.3 live-cd and clicked the "install" icon on desktop, chose "Frugal". It installed ok and I made the change in grub4dos, as per the bottom option in the final window of the installer.FeodorF wrote:Using my lenovo desktop dual core with 2GB of ram will fail to do a frugal install on sda3 (ext4).
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Add up:
The frugal installation was started via the 'install' icon on the desktop.
The frugal install started up ok.
Actually, I didn't use the "install" icon, I opened a terminal and ran "installquirky", so as to see if there are any error messages.
maybe you could try that way also?
[url]https://bkhome.org/news/[/url]
Quirky Xerus 8.3 for x86_64, released July 29, 2017
I booted from the live DVD and installed to a 32gb SDHC card:
# inxi -b
System: Host: puppypc8054 Kernel: 4.11.12 x86_64 (64 bit) Desktop: JWM git-976 Distro: Quirky 8.3 xerus64
Machine: Mobo: Acer model: Aspire X3950 serial: U02C120500059
Bios: American Megatrends v: P01-A3 date: 05/05/2010
CPU: Dual core Intel Core i3 540 (-HT-MCP-) speed/max: 1200/3067 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.org 1.18.4 driver: intel tty size: 202x36 Advanced Data: N/A for root
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 532.1GB (1.1% used)
Info: Processes: 144 Uptime: 48 min Memory: 168.7/5901.1MB Client: Shell (bash) inxi: 2.2.35
#
The SDHC card is a lexar 600x that claims up to 95MB/s, the speed test
shows:
# sync
# #echo 3 > /proc/sys/vm/drop_caches
# dd if=/dev/zero of=/dummyfile bs=1M count=1024 conv=fdatasync oflag=direct
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 85.6042 s, 12.5 MB/s
#
I think they were fibbing a bit, quite a bit. (':roll:')
# inxi -b
System: Host: puppypc8054 Kernel: 4.11.12 x86_64 (64 bit) Desktop: JWM git-976 Distro: Quirky 8.3 xerus64
Machine: Mobo: Acer model: Aspire X3950 serial: U02C120500059
Bios: American Megatrends v: P01-A3 date: 05/05/2010
CPU: Dual core Intel Core i3 540 (-HT-MCP-) speed/max: 1200/3067 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.org 1.18.4 driver: intel tty size: 202x36 Advanced Data: N/A for root
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 532.1GB (1.1% used)
Info: Processes: 144 Uptime: 48 min Memory: 168.7/5901.1MB Client: Shell (bash) inxi: 2.2.35
#
The SDHC card is a lexar 600x that claims up to 95MB/s, the speed test
shows:
# sync
# #echo 3 > /proc/sys/vm/drop_caches
# dd if=/dev/zero of=/dummyfile bs=1M count=1024 conv=fdatasync oflag=direct
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 85.6042 s, 12.5 MB/s
#
I think they were fibbing a bit, quite a bit. (':roll:')
- Attachments
-
- screenshot.jpg
- (107.51 KiB) Downloaded 1368 times
Just a short note for BarryK as a follow up:
Tablet and Pen settings (as well as a lot of others) are nowadays apparently done via the gnome Control-centre. Had a quick look at it and the supposed only mising dep you have is libgudev which has split from gudev since that went system-d into it's own package. May be worth a test to see if with these two you could harness the control centre for your use as both can be built non-system-d according to the arch repositry if they are not already available that way in the Xerus repositories.
Oh and I have the T2 builder running like an angel, only four packages having to rerun stage4, obviously needing something to be tweeked in the build order number to fix. I shall hopefully be starting my first woof alpha build tuesday if the current (and last) T2 build completes sucessfully.
regards
Tablet and Pen settings (as well as a lot of others) are nowadays apparently done via the gnome Control-centre. Had a quick look at it and the supposed only mising dep you have is libgudev which has split from gudev since that went system-d into it's own package. May be worth a test to see if with these two you could harness the control centre for your use as both can be built non-system-d according to the arch repositry if they are not already available that way in the Xerus repositories.
Oh and I have the T2 builder running like an angel, only four packages having to rerun stage4, obviously needing something to be tweeked in the build order number to fix. I shall hopefully be starting my first woof alpha build tuesday if the current (and last) T2 build completes sucessfully.
regards
Re: frugal install will freeze the screen
Hi Barry!BarryK wrote:Hmmm, I did test that frugal install works. I booted 8.3 live-cd and clicked the "install" icon on desktop, chose "Frugal". It installed ok and I made the change in grub4dos, as per the bottom option in the final window of the installer.FeodorF wrote:Using my lenovo desktop dual core with 2GB of ram will fail to do a frugal install on sda3 (ext4).
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Add up:
The frugal installation was started via the 'install' icon on the desktop.
The frugal install started up ok.
Actually, I didn't use the "install" icon, I opened a terminal and ran "installquirky", so as to see if there are any error messages.
maybe you could try that way also?
I did a installquirky in the terminal. Did a full install by mistake. Damn it is not Monday! - Well, the full install works fine, but frugal is still broken. The installation will halt at 73% 30936 of 33184 inodes. Using cd or .iso as source makes no difference. Is 2 GB of ram causing a problem while doing a frugal install in 8.3 ?
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: frugal install will freeze the screen
That is interesting.FeodorF wrote:Hi Barry!BarryK wrote:Hmmm, I did test that frugal install works. I booted 8.3 live-cd and clicked the "install" icon on desktop, chose "Frugal". It installed ok and I made the change in grub4dos, as per the bottom option in the final window of the installer.FeodorF wrote:Using my lenovo desktop dual core with 2GB of ram will fail to do a frugal install on sda3 (ext4).
The install script creates xerus64-8.3 (dir) and copies initrd.q, qsfs and vmlinuz to it.
After the copy process the screen becomes frozen.
The partitions are primary ones with Grub4dos at sda1.
Prior versions worked a1 for me.
Add up:
The frugal installation was started via the 'install' icon on the desktop.
The frugal install started up ok.
Actually, I didn't use the "install" icon, I opened a terminal and ran "installquirky", so as to see if there are any error messages.
maybe you could try that way also?
I did a installquirky in the terminal. Did a full install by mistake. Damn it is not Monday! - Well, the full install works fine, but frugal is still broken. The installation will halt at 73% 30936 of 33184 inodes. Using cd or .iso as source makes no difference. Is 2 GB of ram causing a problem while doing a frugal install in 8.3 ?
Would you mind helping a bit more, try something.
Open /usr/local/install_quirky/install-quirky-to-frugal in geany,
and uncomment lines 114 and 132.
These are 'sync' operations, that were taken out to make install faster.
However, just maybe, with 2GB of RAM, Linux is running out of RAM space. If that is the case, putting those 'sync' lines back in should fix it. But install will be much slower.
I only tested on a laptop with 4GB RAM.
[url]https://bkhome.org/news/[/url]