Create Debian 9 (Stretch) minimal ISO similar to DebianDog
MX LINUX NET INSTALL AS DEBIANDOG
HI FRED,
i am apologize for disturbing you...
MX LINUX RECEIVED GREAT NUMBER
OF RECENSIONS AS THE BEST LINUX OS....
IT IS DEBIAN PERFECTLY ORDINATED...
IT WOULD BE GREAT TO HAVE ONE MX-LINUX-DOG
BUT FROM NET INSTALL ...
WHY NOT DO IT INSTEAD OF UBUNTU?!
THANKS.
i am apologize for disturbing you...
MX LINUX RECEIVED GREAT NUMBER
OF RECENSIONS AS THE BEST LINUX OS....
IT IS DEBIAN PERFECTLY ORDINATED...
IT WOULD BE GREAT TO HAVE ONE MX-LINUX-DOG
BUT FROM NET INSTALL ...
WHY NOT DO IT INSTEAD OF UBUNTU?!
THANKS.
Hi zagreb,
And I have already too much projects going on (starting a new project means that I need to give support, which I don't have the time and energy for).
Fred
First: I think MX-linux is (more than) fine how it is by itself.IT WOULD BE GREAT TO HAVE ONE MX-LINUX-DOG
BUT FROM NET INSTALL ...
WHY NOT DO IT INSTEAD OF UBUNTU?!
And I have already too much projects going on (starting a new project means that I need to give support, which I don't have the time and energy for).
Fred
Updated mklive-stretch script
Changes:
- Kernel install: version 4.9.0-6 (previously was 4.9.0-5)
- Dropped no-pae support (in most cases it works by adding forcepae to the kernel boot command line in case of no-pae capable cpu)
The new .tar.gz containing custom boot scripts, aufs and squashfs kernel modules is now:
dog-boot-stretch-20180224.tar.gz
For existing build, "upgrade-kernel" can be used on a frugal install to upgrade the kernel to version 4.9.0-6, install with Synaptic or apt-get:
deb package (for both 32 and 64 bit (all)):
https://fredx181.github.io/StretchDog/a ... .7_all.deb
(run from: Menu > System > Upgrade-Kernel ..)
Fred
Changes:
- Kernel install: version 4.9.0-6 (previously was 4.9.0-5)
- Dropped no-pae support (in most cases it works by adding forcepae to the kernel boot command line in case of no-pae capable cpu)
The new .tar.gz containing custom boot scripts, aufs and squashfs kernel modules is now:
dog-boot-stretch-20180224.tar.gz
For existing build, "upgrade-kernel" can be used on a frugal install to upgrade the kernel to version 4.9.0-6, install with Synaptic or apt-get:
Code: Select all
apt-get update
apt-get install upgrade-kernel # will install latest version 1.0.7
https://fredx181.github.io/StretchDog/a ... .7_all.deb
(run from: Menu > System > Upgrade-Kernel ..)
Fred
I updated my mklive script and cranked out a new set of ISOs. They look good.
This takes less time than the average Windows update.
BTW, how safe is it to combine a new "live" folder with an old "changes" folder? Are there kernel-specific things in "changes" that would cause problems after a kernel-upgrade?
This takes less time than the average Windows update.
BTW, how safe is it to combine a new "live" folder with an old "changes" folder? Are there kernel-specific things in "changes" that would cause problems after a kernel-upgrade?
I'd say not so safe, not because of kernel-specific things but because of possibly broken package management, see here the problems backi had when doing something similar:rcrsn51 wrote:BTW, how safe is it to combine a new "live" folder with an old "changes" folder? Are there kernel-specific things in "changes" that would cause problems after a kernel-upgrade?
http://murga-linux.com/puppy/viewtopic. ... 440#971440
http://murga-linux.com/puppy/viewtopic. ... 526#971526
http://murga-linux.com/puppy/viewtopic. ... 538#971538
Assuming, btw, that the new "live" is exactly the same build as previous (except for the kernel)
It probably depends, e.g. when the changes contains the same up-to-date status file (in /var/lib/dpkg/) as the new 01-filesystem in "live", then it's safe.
Except then the new kernel version is not registered in the changes, which I guess it's not a real problem.
Fred
Thanks. I looked at the upgrade-kernel script. If I do a kernel-upgrade of a Starter Kit install just by dropping in a new "live" folder, are there a few lines from the script that I could apply to my current "changes" that would finish the job?
The only difference in the new Starter Kit ISO would be the new kernel.
But it is not a major task to start a new "changes".
The only difference in the new Starter Kit ISO would be the new kernel.
But it is not a major task to start a new "changes".
Not sure yet, maybe nothing really required, will investigate and edit here later.rcrsn51 wrote:Thanks. I looked at the upgrade-kernel script. If I do a kernel-upgrade of a Starter Kit install just by dropping in a new "live" folder, are there a few lines from the script that I could apply to my current "changes" that would finish the job?
EDIT: I hesitate to say something about this because a broken dpkg can be a bad thing to happen and not easy to repair.
You can check with comparing the dpkg status file in changes (if exists) with the one from the (new) main 01-filesystem.squashfs, e.g.:
Code: Select all
sdiff -s /mnt/live/memory/changes/var/lib/dpkg/status /mnt/live/memory/images/01-filesystem.squashfs/var/lib/dpkg/status
Code: Select all
sdiff -s /mnt/live/memory/images/changes-exit/var/lib/dpkg/status /mnt/live/memory/images/01-filesystem.squashfs/var/lib/dpkg/status
In general, I'd say, better just start with a new "changes", however depending on the situation, strange things may occur when using old save storage combined with new system.
Fred
Now I understand. Because the kernel upgrade was NOT done through dpkg, the dpkg information still thinks that it is using the old kernel.
I once tried a hack where I ran your upgrade-kernel script on Machine #1. I then squashed the new /lib/modules, and moved it and the new vmlinuz1 to Machine #2.
This appeared to do a kernel upgrade on #2. But I'm guessing that it would have the same potential problem.
I once tried a hack where I ran your upgrade-kernel script on Machine #1. I then squashed the new /lib/modules, and moved it and the new vmlinuz1 to Machine #2.
This appeared to do a kernel upgrade on #2. But I'm guessing that it would have the same potential problem.
Did the kernel upgrade, uninstalled old kernel with synaptic, and remastered after that. All went well and works flawlessly as usual.fredx181 wrote: /snipped
For existing build, "upgrade-kernel" can be used on a frugal install to upgrade the kernel to version 4.9.0-6, install with Synaptic or apt-get:deb package (for both 32 and 64 bit (all)):Code: Select all
apt-get update apt-get install upgrade-kernel # will install latest version 1.0.7
https://fredx181.github.io/StretchDog/a ... .7_all.deb
(run from: Menu > System > Upgrade-Kernel ..)
Fred
Dan
DEBLIVE ISO- 311 MB
I MADE NEW DEBLIVE ISO- 311 MB.
IT WORKS PERFECTLY.
GREAT JOB, FRED!
THANKS...
IT WORKS PERFECTLY.
GREAT JOB, FRED!
THANKS...
Re: DEBLIVE ISO- 311 MB
Ah, nice, thanks, what type of build did you choose or configure ? (always curious about that )zagreb999 wrote:I MADE NEW DEBLIVE ISO- 311 MB.
IT WORKS PERFECTLY.
GREAT JOB, FRED!
THANKS...
Fred
puppy network wizard-quick setup
HI FRED,
I THINK IT WOULD BE VERY USEFUL
TO CREATE FOR DEBIANDOGS
PUPPY NETWORK WIZARD TO BE ABLE TO USE
MORE WIFI MANAGERS...
AND, ALSO, QUICK SETUP-FIRST RUN
TO ADJUST TIME ZONE, KEYBOARD, ETC...
REGARDS...
I THINK IT WOULD BE VERY USEFUL
TO CREATE FOR DEBIANDOGS
PUPPY NETWORK WIZARD TO BE ABLE TO USE
MORE WIFI MANAGERS...
AND, ALSO, QUICK SETUP-FIRST RUN
TO ADJUST TIME ZONE, KEYBOARD, ETC...
REGARDS...
*** Update DogRadio ***
Info, .pet and .deb packages download, topic DogRadio v0.0.8:
http://www.murga-linux.com/puppy/viewtopic.php?t=112858
Install or upgrade "dogradio" with Synaptic or apt-get
Fred
Info, .pet and .deb packages download, topic DogRadio v0.0.8:
http://www.murga-linux.com/puppy/viewtopic.php?t=112858
Install or upgrade "dogradio" with Synaptic or apt-get
Fred
Re: ISOTOOLS
Why not, what you see ? You are trying to edit ISO, right ?zagreb999 wrote:REGARDS
ISOTOOLS CAN NOT FIND SOURCE OF
ISO FILE NOR FOLDER TO EDIT
ISO FILE...
THANKS
Works for me, at the main GUI , I chose Edit ISO, and selected BionicDog ISO, after that.... see screenshots.
And /root/new.iso is created.
Fred
- Attachments
-
- 2018-03-14-182424_384x495_scrot.png
- Edit ISO
- (67.52 KiB) Downloaded 784 times
-
- 2018-03-14-182457_283x167_scrot.png
- Extracted ISO in /media/edit_iso_11836
- (22.1 KiB) Downloaded 782 times
*** Updated "upgrade-kernel" package ***
Previously it only supported upgrading from older kernel to e.g. 4.9.0-6 (latest)
Now there's new Debian package version available for that (latest) 4.9.0-6 kernel, version 4.9.82-1+deb9u3
Upgrade-kernel 1.0.8 supports also now upgrading to that latest package version (and possible future newer versions).
Install upgrade-kernel v 1.0.8 with Synaptic or apt-get.
Run from Menu > System > Upgrade-kernel
The mklive-stretch script is unchanged, because it does already install latest package version of the 4.9.0-6 kernel.
Upgraded 686 pae-kernel to 4.9.82-1+deb9u3 :
Fred
Previously it only supported upgrading from older kernel to e.g. 4.9.0-6 (latest)
Now there's new Debian package version available for that (latest) 4.9.0-6 kernel, version 4.9.82-1+deb9u3
Upgrade-kernel 1.0.8 supports also now upgrading to that latest package version (and possible future newer versions).
Install upgrade-kernel v 1.0.8 with Synaptic or apt-get.
Run from Menu > System > Upgrade-kernel
The mklive-stretch script is unchanged, because it does already install latest package version of the 4.9.0-6 kernel.
Upgraded 686 pae-kernel to 4.9.82-1+deb9u3 :
Code: Select all
root@live:~# uname -a
Linux live 4.9.0-6-686-pae #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) i686 GNU/Linux
Pdf To DjVu GUI 25 Linux.zip in deblive
Pdf To DjVu GUI 25 Linux.zip in deblive
this software is very good.
it converts pdf to djvu,
which is much better than pdf.
but, it works in xz compression...
who knows to activate lz4 option?
regards.
this software is very good.
it converts pdf to djvu,
which is much better than pdf.
but, it works in xz compression...
who knows to activate lz4 option?
regards.