Hi Allyally wrote:peebee
I get failed to create new file
This is an ArtfulPup update....
Did you apply the +16 delta to the original artfulpup-17.11.iso with md5 =
0625cacc699dc6127b1ceea44df5070f
Cheers
peebee
Hi Allyally wrote:peebee
I get failed to create new file
Code: Select all
usr/lib/glib-2.0/glib-compile-schemas usr/share/glib-2.0/schemas || true
usr/lib/glib-2.0/gio-querymodules usr/lib/gio/modules || true
# leafpad
(leafpad:10062): GLib-GObject-WARNING **: 16:22:47.834: Two different plugins tried to register 'GLibProxyResolver'.
(leafpad:10062): GLib-GObject-CRITICAL **: 16:22:47.834: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
(leafpad:10062): GLib-GIO-WARNING **: 16:22:47.834: Tried to register an extension of the type (null) to extension point gio-proxy-resolver. Expected type is GProxyResolver.
Code: Select all
# inxi -Fxx
System: Host: puppypc32150 Kernel: 4.9.86-lxpup-32-pae i686 (32 bit gcc: 7.3.0) Desktop: JWM 2.3.7 dm: N/A
Distro: UBB-Pup 18.03
Machine: Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R2500459
Mobo: FUJITSU model: FJNB225 UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
Chassis: AOD47CE51CBA7001 type: 10
Battery CMB1: charge: 56.0 Wh 100.0% condition: 56.0/56.0 Wh (100%) volts: 12.7/11.1
model: Fujitsu CP293600-01 serial: 01A-X110812201059X status: Full
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9967
clock speeds: min/max: 800/2501 MHz 1: 2501 MHz 2: 2501 MHz 3: 2501 MHz 4: 2501 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0126
Display Server: X.org 1.19.6 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 149x38 Advanced Data: N/A for root
Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1c20
Sound: Advanced Linux Sound Architecture v: k4.9.86-lxpup-32-pae
Network: Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 02:00.0 chip-ID: 168c:002e
IF: wlp2s0 state: up mac: 24:ec:99:24:3b:d1
Drives: HDD Total Size: 64.0GB (41.6% used)
ID-1: /dev/sda model: SAMSUNG_SSD_830 size: 64.0GB serial: N/A
RAID: System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 188 Uptime: 10 min Memory: 406.6/4881.6MB Init: SysVinit v: N/A runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.181 running in lxterminal) inxi: 2.3.7
Code: Select all
# inxi -Fxz
System: Host: puppypc25711 Kernel: 4.9.86-lxpup-32-pae i686
bits: 32 gcc: 7.3.0
Desktop: JWM 2.3.7 Distro: UBB-Pup 18.03
Machine: Device: laptop System: Dell product: Latitude 3350 serial: <filter>
Mobo: Dell model: 0KVTCC v: A00 serial: <filter>
UEFI: Dell v: A13 date: 01/23/2018
Battery BAT0: charge: 33.2 Wh 93.8% condition: 35.4/43.7 Wh (81%)
model: Samsung SDI DELL 6C0FN58 status: N/A
CPU: Dual core Intel Core i3-5005U (-MT-MCP-)
arch: Broadwell rev.4 cache: 3072 KB
flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7981
clock speeds: max: 2000 MHz 1: 600 MHz 2: 1000 MHz 3: 1100 MHz
4: 700 MHz
Graphics: Card: Intel HD Graphics 5500 bus-ID: 00:02.0
Display Server: X.Org 1.19.6
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
version: 3.3 Mesa 18.0.0-rc5 Direct Render: Yes
Audio: Card-1 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Card-2 Intel Wildcat Point-LP High Def. Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.9.86-lxpup-32-pae
Network: Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 03:00.0
IF: enp3s0 state: down mac: <filter>
Card-2: Intel Wireless 7265 driver: iwlwifi bus-ID: 04:00.0
IF: wlp4s0 state: up mac: <filter>
Drives: HDD Total Size: 530.9GB (0.8% used)
ID-1: /dev/sda model: TOSHIBA_MQ01ACF0 size: 500.1GB
ID-2: /dev/sdb model: Ultra_Fit size: 30.8GB
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 184 Uptime: 27 min Memory: 562.0/7756.7MB
Init: SysVinit runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.181) inxi: 2.3.56
#
Code: Select all
# LC_ALL=C LIBGL_DEBUG=verbose glxinfo | grep DRI
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: pci id for fd 4: 8086:0126, driver i965
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/i965_dri.so
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Using DRI3 for screen 0
libGL: Can't open configuration file /root/.drirc: No such file or directory.
Device: Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2 (0x126)
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Can't open configuration file /root/.drirc: No such file or directory.
Code: Select all
# LC_ALL=C LIBGL_DEBUG=verbose glxinfo | grep DRI
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/swrast_dri.so
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Can't open configuration file /root/.drirc: No such file or directory.
OK button does nothing here also. I only have 2 to 4 drives as a rule so I left them in the default location til now. I just used the event manager to try to relocate them both to bottom or right and in both cases the OK button did nothing. Not a pristine boot but I haven't mucked about with the desktop as I'm much more familiar with lxde and XFCE4 and I have a tendency to break JWM if I venture too far.davids45 wrote: As a cross-check, I'd appreciate someone else on the Forum with Bionic trying a drive icon re-alignment in BionicPup Desktop Settings (change from left to bottom display), particularly if a second drive (ie sdb as well as sda) is involved - and if their 'OK' button does anything.