1) started pmount
2) plugged in I-stick, refreshed pmount
(CD goes crazy for a minute, then pmount shows sda correctly)
3) plugged in sandisk, refreshed pmount
(CD goes crazy for a minute, then pmount shows sda and sdb correctly)
4) plugged in lexar firefly, refreshed pmount
(CD goes crazy for a minute, then pmount shows sdb and sdc, but no sda/I-stick
probedisk shows them all)
5) refreshed pmount again
(result the same)
Here is what the console window that I called pmount from looked like:
Code: Select all
sh-3.00# pmount
cat: /proc/pci: No such file or directory
EXIT="REFRESH"
EXIT="REFRESH"
EXIT="REFRESH"
EXIT="REFRESH"
EXIT=abort
/usr/sbin/pmount: line 610: 2359 Terminated xmessage -bg "orange" -buttons "" -title "Puppy drive mounter" "Please wait, probing hardware..."
/usr/sbin/pmount: line 610: 2916 Terminated xmessage -bg "orange" -buttons "" -title "Puppy drive mounter" "Please wait, probing hardware..."
/usr/sbin/pmount: line 610: 3748 Terminated xmessage -bg "orange" -buttons "" -title "Puppy drive mounter" "Please wait, probing hardware..."
/usr/sbin/pmount: line 610: 4736 Terminated xmessage -bg "orange" -buttons "" -title "Puppy drive mounter" "Please wait, probing hardware..."
/usr/sbin/pmount: line 610: 6268 Terminated xmessage -bg "orange" -buttons "" -title "Puppy drive mounter" "Please wait, probing hardware..."
Code: Select all
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: I-Stick2 Model: IntelligentStick Rev: 0.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 2007040 512-byte hdwr sectors (1028 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2007040 512-byte hdwr sectors (1028 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
ndiswrapper (iw_set_freq:382): setting configuration failed (C0010015)
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 1
usb 1-1.3: new full speed USB device using uhci_hcd and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: SanDisk Model: Cruzer Micro Rev: 0.2
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
usb 1-1.4: new full speed USB device using uhci_hcd and address 5
usb 1-1.4: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: LEXAR Model: JD FIREFLY Rev: 3000
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdc: 2030592 512-byte hdwr sectors (1040 MB)
sdc: Write Protect is off
sdc: Mode Sense: 43 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 2030592 512-byte hdwr sectors (1040 MB)
sdc: Write Protect is off
sdc: Mode Sense: 43 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: Attached scsi removable disk sdc
usb-storage: device scan complete
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 1
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 16
Buffer I/O error on device hdc, logical block 2
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 24
Buffer I/O error on device hdc, logical block 3
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 32
Buffer I/O error on device hdc, logical block 4
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 40
Buffer I/O error on device hdc, logical block 5
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 48
Buffer I/O error on device hdc, logical block 6
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 56
Buffer I/O error on device hdc, logical block 7
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
Code: Select all
sh-3.00# probedisk
/dev/hdc|cdrom|MATSHITADVD-ROM SR-8175
/dev/hda|disk|IC25N020ATDA04-0
/dev/sda|Direct-Access|I-Stick2 IntelligentStick
/dev/sdb|Direct-Access|SanDisk Cruzer Micro
/dev/sdc|Direct-Access|LEXAR JD FIREFLY