Freecad0.16-17-18/32-64bit+HeeksCAD1.1.0+HeeksCNC+blendercam
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Uploaded freecad-daily-0.18-beta sfs,32&64 bits to date..
(Read first post..)
Tried to make upupbb freecad sfs...no luck,dependencies uncooperative libs,but weirdly made a too big 264mb pet with all libs recognized!!! i should investigate more those sfs libs not seen problems one day..
until that the ¨trusty¨ fc sfs work if you install those missing. Dont forget you can always install fc from ppm/old-stable or deb/daily-beta and add bits and pieces required,upupbb speaking,or else..
(Read first post..)
Tried to make upupbb freecad sfs...no luck,dependencies uncooperative libs,but weirdly made a too big 264mb pet with all libs recognized!!! i should investigate more those sfs libs not seen problems one day..
until that the ¨trusty¨ fc sfs work if you install those missing. Dont forget you can always install fc from ppm/old-stable or deb/daily-beta and add bits and pieces required,upupbb speaking,or else..
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
tested Bionicpup64 with freecad x64 sfs found here= works....
Need qt4....or
(QT4_amd64-April64.pet.gracias xanad)(QT4_amd64 or here),yes ,its another 30mb...
edit:lib error fix,libopenjpeg2+libfreeimage3
(this pet fix... for now... bionicpup64 -freecad-daily-tahr-build sfs)
woooo...its almost my 10th puppy user birthday....long log live to puppys....
lot of distros did not last that long...if you could see puppys as a distro,or hydrid? anyhow,very useful and appreciate here...
Need qt4....or
(QT4_amd64-April64.pet.gracias xanad)(QT4_amd64 or here),yes ,its another 30mb...
edit:lib error fix,libopenjpeg2+libfreeimage3
(this pet fix... for now... bionicpup64 -freecad-daily-tahr-build sfs)
woooo...its almost my 10th puppy user birthday....long log live to puppys....
lot of distros did not last that long...if you could see puppys as a distro,or hydrid? anyhow,very useful and appreciate here...
Last edited by Revolverve on Mon 29 Oct 2018, 14:11, edited 2 times in total.
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
-
- Posts: 18
- Joined: Sat 19 Jul 2014, 11:07
freead 0.18beta 64bit not working
i am using fatdog64 721
i have downloaded freecad 0.18 sfs file from google drive
also downloaded heekscad 1.1.0 sfs file. but when i try to open these nothing happens what do i do?
i have downloaded freecad 0.18 sfs file from google drive
also downloaded heekscad 1.1.0 sfs file. but when i try to open these nothing happens what do i do?
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Re: freead 0.18beta 64bit not working
Sadly those "debian/ubuntu/rpm binaries based" sfs will not work in fatdog64 without lots of workaround,but you could ask fatdog team if they could compile it!chimnya123 wrote:i am using fatdog64 721
i have downloaded freecad 0.18 sfs file from google drive
also downloaded heekscad 1.1.0 sfs file. but when i try to open these nothing happens what do i do?
try tahrpup64 or xenialpup64(read first post for both) or bionicpup64(read above post for requirement).
You are welcome to test and ask here if problems.
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Uploaded freecad-daily-0.18-beta sfs,32&64 bits up to date..
(Read first post..)
Edit--please note that it is "partially test" in the sense that there are lots of modules ,its beta,its daily upgrade(the ubuntu builds used here...not those sfs),i cannot deeply test all of it,i do try that all modules load ok in their "basic stage",meaning,no missing libs/links/etc.
no time here for tutorial,but you are welcome for support/fix/help about these sfs .
Again,save your work often,be careful unloading these sfs (and all other sfs )as it does include lots of dependencies and if you already got "user installed from ppm stuff that are using the same libs of lower/higher versions" it could break something,so learn how to backup your savefile/folder is a plus,if not an absolute necessity ...
(Read first post..)
Edit--please note that it is "partially test" in the sense that there are lots of modules ,its beta,its daily upgrade(the ubuntu builds used here...not those sfs),i cannot deeply test all of it,i do try that all modules load ok in their "basic stage",meaning,no missing libs/links/etc.
no time here for tutorial,but you are welcome for support/fix/help about these sfs .
Again,save your work often,be careful unloading these sfs (and all other sfs )as it does include lots of dependencies and if you already got "user installed from ppm stuff that are using the same libs of lower/higher versions" it could break something,so learn how to backup your savefile/folder is a plus,if not an absolute necessity ...
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca
Uploaded a fixed freecad-dependency-32bit for xenial
(Read first post..)
(Read first post..)
- Revolverve
- Posts: 255
- Joined: Sat 08 Nov 2008, 21:01
- Location: 45°17'28.8"N 72°16'08.8"W_avatar/ mira.ca