Page 6 of 24
Posted: Fri 01 Oct 2010, 19:40
by bigpup
Dear green_dome,
Please do not think no one is using this. You are the Wine expert for Puppy Linux. Thank you, thank you for keeping it updated!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
In your case, very little comments is good. It just works. I wish others would follow your example and latch onto one of the major programs and keep them updated like you have done with Wine.
Wine 1.3.4
Posted: Fri 08 Oct 2010, 02:12
by green_dome
my attempt at compiling wine 1.3.4
wine-1.3.4-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/
wine_DEV-1.3.4-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/
wine_DOC-1.3.4-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/
wine-1.3.4-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/
wine-1.3.4-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/
-----------------------------------------------------------------------------------------------------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs
puppies-431.1-main-Xserver.iso -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
devx_430.sfs -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
-----------------------------------------------------------------------------------------------------------
Files located at
http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)
I installed these packages before compiling:
esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet
esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet
fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet
fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet
gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet
gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet
jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet
jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet
libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet
libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet
openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet
openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet
xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet
xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet
-----------------------------------------------------------------------------------------------------------
When compiling, I used
Code: Select all
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file
'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.
For help with Gecko, look
here
I use the console to install packages from
winetricks. For help with this I use
[source]
my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from
this post.
works fine
Posted: Fri 08 Oct 2010, 14:55
by vovchik
Dear green_dome,
The new version is fine, so many thanks, as usual.
With kind regards,
vovchik
Posted: Fri 08 Oct 2010, 16:59
by Jim1911
Hi green_dome,
Kudos for your fine wine pets and sfs, I've been using them for quite a while and really appreciate your hard work in keeping them up to date.
Thanks again,
Jim
Posted: Sat 09 Oct 2010, 01:25
by looseSCREWorTWO
G'day green_dome,
Thankyou for the Wine pets. Being able to run IrfanView from Puppy is brilliant. Wine is SO well-named - it just gets better and better with age.
Wine 1.3.5 released
Posted: Sat 16 Oct 2010, 10:23
by vovchik
Dear green_dome,
May we again call on your services? A new version (1.3.5) is out and it includes a slew of improvements (
http://www.winehq.org/announce/1.3.5). Many thanks in advance.
With kind regards,
vovchik
Posted: Sat 16 Oct 2010, 19:10
by Béèm
green_dome. I have been using your work also but never expressed some appreciation.
So thank you.
Wine 1.2.1
Posted: Tue 19 Oct 2010, 03:52
by green_dome
my attempt at compiling wine 1.2.1 (stable release)
wine-1.2.1-i486.pet (release 1)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DEV-1.2.1-i486.pet (release 1) (development package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DOC-1.2.1-i486.pet (release 1) (documentation package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine-1.2.1-i486-sfs3.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs3.sfs/>
wine-1.2.1-i486-sfs4.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs4.sfs/>
-----------------------------------------------------------------------------------------------------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs
puppies-431.1-main-Xserver.iso -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
devx_430.sfs -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
-----------------------------------------------------------------------------------------------------------
Files located at <
http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)
I installed these packages before compiling:
esound-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
esound_DEV-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
fontconfig-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
fontconfig_DEV-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
gnutls+deps-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
gnutls+deps_DEV-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
jack-audio-connection-kit-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
jack-audio-connection-kit_DEV-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
libgphoto2-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
libgphoto2_DEV-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
openldap-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
openldap_DEV-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
xorg_xorg_full_dri-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet>
xorg_xorg_full_dri_DEV-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet>
-----------------------------------------------------------------------------------------------------------
When compiling, I used
Code: Select all
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file
'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.
For help with Gecko,
<
http://wiki.winehq.org/Gecko>
I use the console to install packages from <
winetricks>. For help with this I use
source <
http://www.winehq.org/pipermail/wine-de ... 62347.html>
my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from
this post.
Re: Wine 1.2.1
Posted: Tue 19 Oct 2010, 12:57
by tlchost
Is there another location for the file? Can not reach the server.
Thanks
Thom
Posted: Tue 19 Oct 2010, 14:07
by green_dome
tlchost,
I was having trouble reaching their server too. I can access it now.
Wine
Posted: Tue 19 Oct 2010, 16:24
by tlchost
green_dome wrote:tlchost,
I was having trouble reaching their server too. I can access it now.
Thanks...downloading now
1.3.5
Posted: Wed 20 Oct 2010, 19:37
by vovchik
Dear green_dome,
Any luck with the latest beta version (1.3.5)?
With kind regards,
vovchik
Wine 1.3.5
Posted: Thu 21 Oct 2010, 03:19
by green_dome
my attempt at compiling wine 1.3.5
wine-1.3.5-i486.pet (release 1)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DEV-1.3.5-i486.pet (release 1) (development package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DOC-1.3.5-i486.pet (release 1) (documentation package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine-1.3.5-i486-sfs3.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs3.sfs/>
wine-1.3.5-i486-sfs4.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs4.sfs/>
-----------------------------------------------------------------------------------------------------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs
puppies-431.1-main-Xserver.iso -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
devx_430.sfs -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
-----------------------------------------------------------------------------------------------------------
Files located at <
http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)
I installed these packages before compiling:
esound-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
esound_DEV-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
fontconfig-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
fontconfig_DEV-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
gnutls+deps-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
gnutls+deps_DEV-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
jack-audio-connection-kit-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
jack-audio-connection-kit_DEV-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
libgphoto2-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
libgphoto2_DEV-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
openldap-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
openldap_DEV-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
xorg_xorg_full_dri-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet>
xorg_xorg_full_dri_DEV-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet>
-----------------------------------------------------------------------------------------------------------
When compiling, I used
Code: Select all
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file
'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.
For help with Gecko,
<
http://wiki.winehq.org/Gecko>
I use the console to install packages from <
winetricks>. For help with this I use
source <
http://www.winehq.org/pipermail/wine-de ... 62347.html>
my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from
this post.
version 1.3.5
Posted: Thu 21 Oct 2010, 06:48
by vovchik
Dear green_dome,
Wow, that was quick!. As usual, it works like a charm. I am still trying to find an app that uses animated cursors, since they apparently work now in this version.
With kind regards,
vovchik
Re: Wine 1.3.5
Posted: Mon 25 Oct 2010, 11:40
by scsijon
I take it I only need these three to get wine up and running green_dome?
regards
scsijon
Posted: Mon 25 Oct 2010, 20:24
by Makoto
If you know what you're doing, you might only need the main Wine .pet (wine-1.3.5-i486.pet, in this case). Normal end-users might just need the main .pet and the documentation.
At least, I've only used the main .pet.
green_dome: Thanks! I'm still working out how to compile things with my particular setup, myself... is there a good place to find dev packages, or do I have to resort to the Ubuntu and similar archives, for that?
Wine 1.3.6 is out
Posted: Sat 30 Oct 2010, 07:04
by vovchik
Dear green_dome,
Again, if we could avail ourselves of your services for 1.3.6, which just came out... This version finally has support for X11 cursors, which means X11 cursor themes should work (
http://www.winehq.org/announce/1.3.6).
Many thanks in advance,
vovchik
Wine 1.3.6
Posted: Mon 01 Nov 2010, 03:25
by green_dome
my attempt at compiling wine 1.3.6
wine-1.3.6-i486.pet (release 1)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DEV-1.3.6-i486.pet (release 1) (development package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine_DOC-1.3.6-i486.pet (release 1) (documentation package)
<
http://www.wuala.com/version2013/Public ... -i486.pet/>
wine-1.3.6-i486-sfs3.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs3.sfs/>
wine-1.3.6-i486-sfs4.sfs (release 1)
<
http://www.wuala.com/version2013/Public ... -sfs4.sfs/>
-----------------------------------------------------------------------------------------------------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs
puppies-431.1-main-Xserver.iso -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
devx_430.sfs -
[forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice)
[mirror 2] [mirror 3]
-----------------------------------------------------------------------------------------------------------
Files located at <
http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)
I installed these packages before compiling:
esound-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
esound_DEV-0.2.41-i486.pet
<
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>
fontconfig-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
fontconfig_DEV-2.7.1-i486-pup4.pet
<
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>
gnutls+deps-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
gnutls+deps_DEV-2.6.6-i486.pet
<
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>
jack-audio-connection-kit-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
jack-audio-connection-kit_DEV-0.116.1-i486.pet
<
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>
libgphoto2-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
libgphoto2_DEV-2.4.6-pup4.pet
<
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>
mpg123-1.12.4.pet
download: <
http://murga-linux.com/puppy/viewtopic. ... ff4a519857>
forum post: <
http://murga-linux.com/puppy/viewtopic. ... 857#454688>
mpg123_DEV-1.12.4.pet
download: <
http://murga-linux.com/puppy/viewtopic. ... ff4a519857>
forum post: <
http://murga-linux.com/puppy/viewtopic. ... 857#454688>
openldap-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
openldap_DEV-2.4.13-i486.pet
<
http://puppylinux.asia/members/T/444/op ... 3-i486.pet>
xorg_xorg_full_dri-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet>
xorg_xorg_full_dri_DEV-7.3.pet
<
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet>
-----------------------------------------------------------------------------------------------------------
When compiling, I used
Code: Select all
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file
'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.
For help with Gecko,
<
http://wiki.winehq.org/Gecko>
I use the console to install packages from <
winetricks>. For help with this I use
source <
http://www.winehq.org/pipermail/wine-de ... 62347.html>
my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from
this post.
Posted: Mon 01 Nov 2010, 03:55
by green_dome
Makoto,
is there a good place to find dev packages, or do I have to resort to the Ubuntu and similar archives, for that?
<
Ref.>
I have found .dev files usually by google searching for a specific application. Notice the files I used when compiling Wine are from a few different websites. I am always on the lookout for other places that host .dev files.
Great work
Posted: Mon 01 Nov 2010, 10:33
by vovchik
Dear green_dome,
Works splendidly and we can finally use our normal X11 cursors. This is the first version to support them, so I am pleased. Wine is really developing nicely....
Thanks and kind regards,
vovchik