(old)Puppy Linux Discussion Forum

Posted: **Fri 10 Feb 2012, 17:42**

zigbert wrote:
jemimah wrote:But I still prefer Xnoise and I'd like to avoid adding ffmpeg to the base.
Fair enough

I didn't know about Xnoise, and since you are making a build without ffmpeg, I have a feeling I will get known to other as well.

Sigmund

I've added pmusic, and pburn, and some others to the repo.

Posted: **Fri 10 Feb 2012, 17:59**

jemimah wrote:If so we can try a newer kernel at some point.

I really hope so, since my trusty old PC died and a brand new one was obtained I find myself like a kid outside the candy store window. I see all of these nice things like Saluki and I can only look, not touch. So far only FatDog & the latest Slacko with the 3x kernel support the new hardware.

Saluki looks so good too.

Posted: **Fri 10 Feb 2012, 18:54**

jemimah wrote:
I'm not sure if the broadcom module loading problem is fixed yet. If so we can try a newer kernel at some point.

jemimah

the broadcom saga continues in 5x13 SMP but pemasu is on it.

http://murga-linux.com/puppy/viewtopic. ... &start=480

Posted: **Fri 10 Feb 2012, 19:45**

There was several things affecting. But I am hopeful. Compiling new 3.1.10 kernel now.
http://murga-linux.com/puppy/viewtopic. ... 481#603481

Above concerns brcmsmac problem. B43 driver problem has been fixed through woof. It autoloads now without problem. I did update b43 firmwares slightly also.

Posted: **Fri 10 Feb 2012, 20:54**

Problem with my keyboard (azerty). I always get qwerty (Saluki 10 or 11).
or keyboard layout must be always 'azerty' for France.
No problem with Slacko or Luci.

Saluki 11 is good for my PC
(Asus M2V, 4G RAM)

Posted: **Fri 10 Feb 2012, 22:37**

I've upload the following to the repo:

pburn
pmusic
pbackup
pmirror
pwebcam
cire
pup-advert-blocker
goggles music manager
xournal
audacity
gsudoku
ace of penguins
sdl-ball

I'll be adding more over the next few days. Requests?

Posted: **Fri 10 Feb 2012, 22:42**

Discovered movgrab today, it's really nice and amazingly fast. I've been using youtube-dl for some time, but it requires Python, while the former is written in C.

It's very small; a Yad frontend could be an amazingly nice addition to Saluki.

Posted: **Fri 10 Feb 2012, 22:51**

Soliver wrote one - it just needs testing/debugging.
http://murga-linux.com/puppy/viewtopic. ... &start=180

Posted: **Fri 10 Feb 2012, 23:42**

jemimah wrote:It is probably as suggested above, that this kernel is too old for your graphics card.

My laptop is similar, and am using one of pemasu's 3.1 kernels - but I am finding it really unstable.

I'm not sure if the broadcom module loading problem is fixed yet. If so we can try a newer kernel at some point.

Doubt that is the problem, as I understand that you are trying to maintain compatibility with Racy. Attached is a sys-info report generated by Racy 5.2.2 running on the same laptop that is having trouble with Saluki. Possibly it has some clues as to the problem.

Regards,
Jim

Posted: **Fri 10 Feb 2012, 23:58**

Jim1911 wrote:
jemimah wrote:It is probably as suggested above, that this kernel is too old for your graphics card.

My laptop is similar, and am using one of pemasu's 3.1 kernels - but I am finding it really unstable.

I'm not sure if the broadcom module loading problem is fixed yet. If so we can try a newer kernel at some point.
Doubt that is the problem, as I understand that you are trying to maintain compatibility with Racy. Attached is a sys-info report generated by Racy 5.2.2 running on the same laptop that is having trouble with Saluki. Possibly it has some clues as to the problem.

Regards,
Jim

Racy has a 3.0 kernel - Saluki does not. There is no other difference in the video drivers.

Posted: **Sat 11 Feb 2012, 00:38**

jemimah wrote:I'll be adding more over the next few days. Requests?

neveroid1 is cli. couldn't find it so the upload is from my pets.

numptyphytics from my pets

billiards from my pets

martian_memory
enigma
lmarbles

the above are all pets from murga. only dependency is sdl-1.2.9
all work ok in slacko 5.3.3.

thanks

Posted: **Sat 11 Feb 2012, 00:40**

Tasgarth wrote:Problem with my keyboard (azerty). I always get qwerty (Saluki 10 or 11).
or keyboard layout must be always 'azerty' for France.
No problem with Slacko or Luci.

Saluki 11 is good for my PC
(Asus M2V, 4G RAM)

I just got the Xfce keyboard layout tool to work so try the next release and let me know if it works better.

Posted: **Sat 11 Feb 2012, 00:43**

movgrab

http://murga-linux.com/puppy/viewtopic. ... start=1770

Posted: **Sat 11 Feb 2012, 02:32**

jim3630 wrote:
jemimah wrote:I'll be adding more over the next few days. Requests?
neveroid1 is cli. couldn't find it so the upload is from my pets.

numptyphytics from my pets

billiards from my pets

martian_memory
enigma
lmarbles

the above are all pets from murga. only dependency is sdl-1.2.9
all work ok in slacko 5.3.3.

thanks

I tried these,
billiards doesn't run

Code: Select all

libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by /usr/games/billard-gl)

numptyphytics needs LibSDL1.2-forDoom and the transparency compositor turned off.

neveroid1 also needs the transparency compositor turned off

edit: there is no menu entry for neveroid1, type nevernoid in the terminal.

Edit: these have been fixed, see jemimah's post next page

Posted: **Sat 11 Feb 2012, 02:41**

forgot iirc used this for billiards in slacko.

thanks for pet for the LibSDL1.2-forDoom

Posted: **Sat 11 Feb 2012, 03:14**

jim3630 wrote:forgot iirc used this for billiards in slacko.

thanks for pet for the LibSDL1.2-forDoom

No worries, I stripped out the doc files to make it a bit smaller

Edit deleted files, not needed for Billiards game, it has been recompiled.

Posted: **Sat 11 Feb 2012, 03:35**

Requests?

. . . since you ask . . .

pdf-cube
imagination
ATI crystal graphics and NVidia accelerated drivers
GLX drivers
Blender
Openshot 1.4.2 (for me requires ATI, GLX and Python)
Xaralx
plogo (Puppy prog)
zensound (Puppy prog)
latest Chromium
xchat (ready to go Pidgin needs setting up to go to Puppy IRC)

Enclosed is Growl Security for Saluki (I am in Slacko, so has not been tried in Saluki)

Code: Select all

#! /bin/bash
# Growl v 1.6 Feb 2012
# created by Shadow and Lobster
# security enhancements and probes for Puppy Linux
# New for 1.6: Updated for Puppy 'Saluki' 
# browser run in safe mode, edit file added, update gtkdialog4, LastPass Password Manager,
#
# New for 1.3: Puppy Security, Last Password, Fido non root in Help, Hide My Ass 

export Grrr='
<window title="GROWL" window-position="1">
<vbox>
  <menubar>
    <menu>
        <menuitem>
             <label>Hide My Ass</label>
             <action>defaultbrowser http://hidemyass.com/ &</action>
         </menuitem>
         <menuitem>
            <label>Run Firewall</label>
            <action>rxvt -e /usr/sbin/firewall_install.sh</action>
         </menuitem>
         <menuitem>
            <label>Run as spot</label>
            <action>`Xdialog --wrap --screencenter --left --title "Run as spot" --msgbox "Run as Super User. \n SPOT" 600x0`</action>
            <action>rxvt -e su spot &</action>
            <action>exit</action>
         </menuitem>
         <menuitem>
           <label>Run IRC Chat securely</label>
            <action>`Xdialog --wrap --screencenter --left --title "Run IRC securely" --msgbox "Puppy is on freenode server. \n in #puppylinux Network super user SPOT" 600x0`</action>
            <action>su spot -c defaultchat &</action>
         </menuitem> 
         <menuitem>
             <label>Install Noscript</label>   
             <action>`Xdialog --wrap --screencenter --left --title "install noscript" --msgbox "Install noscript. \n As super user SPOT" 600x0`</action>
             <action>rxvt -e su spike &</action>           
             <action>rxvt -e defaultbrowser https://addons.mozilla.org/en-US/seamonkey/addon/722 &</action>
             <action>exit</action>
         </menuitem>
         <menuitem>
          <label>LastPass Password Manager</label>
          <action>`Xdialog --wrap --screencenter --left --title "install LastPass" --msgbox "Install Encrypted Password Manager. \n As super user SPOT" 600x0`</action>
          <action>rxvt -e su spike &</action>           
          <action>rxvt -e defaultbrowser https://addons.mozilla.org/en-US/seamonkey/addon/lastpass-password-manager/ &</action>
          <action>exit</action>
         </menuitem>
         <menuitem>
            <label>Run Browser securely</label>
            <action>`Xdialog --wrap --screencenter --left --title "Run browser securely" --msgbox "Default browser will look plain whilst running securely. \n as super user SPOT" 600x0`</action>
            <action>su spike -c&</action>
            <action>seamonkey -safe-mode &</action>
         </menuitem>
         <menuitem>
             <label>Encrypt a File: bycrypt</label>
             <action>rxvt -e /usr/sbin/bcrypt_gui &</action>
         </menuitem>
         <menuitem>
             <label>Ccrypt install</label>
             <action>rxvt -e defaultbrowser http://puppylinux.org/wikka/ccrypt &</action>
         </menuitem>  
         <menuitem>
                 <label>Enhanced Lock Screen</label>
                 <action>rm -f /root/.xlockrc</action>
                 <action>xmodmap -e "keycode 37="</action>
                 <action>xmodmap -e "keycode 109="</action>
                 <action>rxvt -e /usr/local/apps/Xlock/AppRun &</action>
                 <action>`Xdialog --wrap --screencenter --left --title "reactivating ctrl keys" --msgbox "reactivating ctrl keys. \n deactivated whilst using lockscreen" 600x0`</action>
                 <action>xmodmap -e "keycode 37=Control_L"</action>
                 <action>xmodmap -e "keycode 109=Control_R"</action>
        </menuitem>
        <menuitem>
               <label>Remove Flash cookies</label>
               <action>rm -rf /root/.macromedia</action>
               <action>rm -rf /intrd/pup_rw/root/.macromedia/</action>         
        </menuitem>
               <menuitem stock="gtk-quit">
               <action>echo You selected the quit menu item</action>
               <action type="exit">exit by menu</action>
        </menuitem>
      <label>Security</label>
    </menu>
    <menu>
        <menuitem>
               <label>Shields Up</label>
               <action>defaultbrowser https://www.grc.com/x/ne.dll?bh0bkyd2 &</action>
        </menuitem>        
        <menuitem>
               <label>Hackermode</label>
               <action>defaultbrowser http://hackerwatch.org/probe/ &</action>
        </menuitem>
        <menuitem>
               <label>Pcflank</label>
               <action>defaultbrowser http://www.pcflank.com/scanner1.htm &</action>
        </menuitem>
    <label>Probes</label>
    </menu>       
    <menu>
        <menuitem>
           <label>Credits</label>
            <action>`Xdialog --wrap --screencenter --left --title "About" --msgbox "Growl v 1.4\n23 Sept 2011\nCreated by Lobster and Shadow" 600x0`</action>
        </menuitem>
        <menuitem>
             <label>About Flash Cookies</label>
             <action>defaultbrowser http://www.murga-linux.com/puppy/viewtopic.php?p=340237#340237 &</action>
         </menuitem>  
         <menuitem>
             <label>Security Tips</label>
             <action>defaultbrowser http://puppylinux.org/wikka/security &</action>
         </menuitem> 
         <menuitem>
             <label>Seamonkey Security</label>
             <action>defaultbrowser https://addons.mozilla.org/en-US/seamonkey/browse/type:1/cat:46 &</action>
         </menuitem> 
         <menuitem>
             <label>ISP shaping traffic?</label>
             <action>defaultbrowser http://broadband.mpi-sws.org/transparency/glasnost.php &</action>
         </menuitem>
         <menuitem>
           <label>Fido non root</label>
           <action>defaultbrowser http://bkhome.org/blog/?viewDetailed=02240 &</action>
         </menuitem> 
         <menuitem>
           <label>FAQ</label>
           <action>`Xdialog --wrap --screencenter --left --title "FAQ" --msgbox "Lock screen - security protection level = low, suitable for young children, colleagues at work and Window users \n Load firewall - security protection level = high \n Run as spot, run browser as spot, run Puppy browser as spot - security protection level = high \n Encrypt a file bycrypt - security protection level = high \n Tip: Restart x server - flushes memory \n Tip: Use Encrypt save file if saving \n Tip: Make sure adblock is enabled (low) or install noscript (high security)" 600x0`</action>
         </menuitem>
          <menuitem>
           <label>Last Password</label>
           <action>defaultbrowser https://lastpass.com/ &</action>
         </menuitem>
         <menuitem>
           <label>Edit source</label>
           <action>geany GROWL16 &</action>
         </menuitem>
         <menuitem>
           <label>Build a tin hat</label>
           <action>defaultbrowser http://zapatopi.net/afdb/ &</action>
         </menuitem>
    <label>Help</label>
   </menu>   
  </menubar>
  <frame>
       <pixmap>
         <input file>/usr/share/midi-icons/lock-screen48.png</input>
       </pixmap>
       <text><label>Saluki GROWL 1.6</label></text>
   </frame>
   <hbox>
      <button cancel></button>
  </hbox>
</vbox>
 </window>'

gtkdialog4 --program Grrr
unset Grrr

Posted: **Sat 11 Feb 2012, 03:47**

here are others

Posted: **Sat 11 Feb 2012, 03:50**

trouble uploading. seems can only do one at a time

Posted: **Sat 11 Feb 2012, 03:58**

did anyone try making a symlink for libstdc++.so.6, rather than adding a whole library, that is the kind of stuff that adds unnecessary bloat and also means that it was compiled in a different development environment (which _can_ be bad "juju" ?sp?)

(old)Puppy Linux Discussion Forum

Saluki

azerty keyboard

Re: azerty keyboard