Hello icake.
Can you tell me if the wqy-microhei font supports all CJK? It seems a fairly standard font which most Chinese users would load in most Linux distros. Info I have is that it does support all CJK, I just wish to confirm your pets do too.
Reason is I have a little C app (relevant to puppy too) that is gettext'd and I wish to add CJK support.
Thx.
Chinese Language Pets
Puppy Linux Blog - contact me for access
Chinese Language Pets
yes.Can you tell me if the wqy-microhei font supports all CJK?
Some of my Chinese language pets and half-Chinese language pets will install the wqy-michrohei font file to the English Puppy. These include all the early Chinese language pets created before version 8.0.0 and all the half-Chinese language pets from version 8.X.X to 13.X.X. Once these pets are installed, the modified English Puppy system will have wqy-michrohei fonts and so can display CJK.Info I have is that it does support all CJK, I just wish to confirm your pets do too.
Thanks. I'll post the app soon and perhaps you would be interested to do the Chinese translation? It's only 8 lines, take 5 minutes 
. Currently I have presumably awful google translation. For all I know it could say something offensive! (I hope not). It was to test the font rendering which seems working.
There is also virtual term output (only for debug) .. I suppose the user must set "wenquanyi micro hei" in their terminal settings? Thanks.
. Currently I have presumably awful google translation. For all I know it could say something offensive! (I hope not). It was to test the font rendering which seems working.There is also virtual term output (only for debug) .. I suppose the user must set "wenquanyi micro hei" in their terminal settings? Thanks.
Puppy Linux Blog - contact me for access
Chinese Language Pets
Let me know when your program is ready.I'll post the app soon and perhaps you would be interested to do the Chinese translation?
I think it depends on the original font setting. Some terminal font setting can display CJK already (therefore no need to reset) while others cannot (they need to be reset to enable CJK display).the user must set "wenquanyi micro hei" in their terminal settings?
Chinese Language Pets
LazYUnicorn 001 was released by LazY Puppy on 20 Feb 2015
Key features:
Based on unicorn
target users are Puppy users who know German
more information (mostly German):
http://www.murga-linux.com/puppy/viewto ... 3b85c14c09
http://www.murga-linux.com/puppy/viewto ... 622#829622
download LazYUnicorn-001-Grub4DOS.iso (614 mb):
http://archive.org/details/Puppy_Linux_ ... ub4DOS.iso
I have made these Chinese language pets for LazYUnicorn 001
1. half-Chinese language pets:
enable you to display and input Chinese language under LazYUnicorn 001
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.0.pet (24 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 19, 2015)
b. SCIM input platform:
scim_1.4.14-en-zh-raring-13.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
lazyunicorn-001-zhcn-13.0.0.pet (2.5 mb)
d. Traditional Chinese:
lazyunicorn-001-zhhk-13.0.0.pet (2.5 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Key features:
Based on unicorn
target users are Puppy users who know German
more information (mostly German):
http://www.murga-linux.com/puppy/viewto ... 3b85c14c09
http://www.murga-linux.com/puppy/viewto ... 622#829622
download LazYUnicorn-001-Grub4DOS.iso (614 mb):
http://archive.org/details/Puppy_Linux_ ... ub4DOS.iso
I have made these Chinese language pets for LazYUnicorn 001
1. half-Chinese language pets:
enable you to display and input Chinese language under LazYUnicorn 001
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.0.pet (24 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 19, 2015)
b. SCIM input platform:
scim_1.4.14-en-zh-raring-13.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
lazyunicorn-001-zhcn-13.0.0.pet (2.5 mb)
d. Traditional Chinese:
lazyunicorn-001-zhhk-13.0.0.pet (2.5 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake.
Please check your private messages or go to this thread http://www.murga-linux.com/puppy/viewtopic.php?t=98299 for my program.
Please check your private messages or go to this thread http://www.murga-linux.com/puppy/viewtopic.php?t=98299 for my program.
Puppy Linux Blog - contact me for access
Chinese Language Pets
I have created 2 mo and 2 po files for pmcputemp:
a. Traditional Chinese (for locales zh_HK and zh_TW)
pmcputemp.icakehk.po
pmcputemp.icakehk.mo
b. Simplified Chinese (for locales zh_CN and zh_SG)
pmcputemp.icakecn.po
pmcputemp.icakecn.mo
These are now available for download from http://sdrv.ms/18tY2vX
a. Traditional Chinese (for locales zh_HK and zh_TW)
pmcputemp.icakehk.po
pmcputemp.icakehk.mo
b. Simplified Chinese (for locales zh_CN and zh_SG)
pmcputemp.icakecn.po
pmcputemp.icakecn.mo
These are now available for download from http://sdrv.ms/18tY2vX
Chinese Language Pets
Fathouse64 and Mariner64.3.18.5 was released by Dry Falls on 20 Jan 2015
Key features:
based on Lighthouse64 by Tazoc
kernel 3.18.5
3 browsers: Icecat, Seamonkey and Firefox
5 desktops: JWM, lxde and open-box already included, xfce and kde also available
compatable with slackware from 13.04 to 14.1
more information:
http://murga-linux.com/puppy/viewtopic.php?t=97393
download isoes:
Fathouse-retro
(Fathouse64-602.iso)
https://drive.google.com/folderview?id= ... sp=sharing
Extrasfs (Extrasfs.iso-2,-3)
https://drive.google.com/folderview?id= ... sp=sharing
Mariner602-b2(L64-3.18.5.iso)
https://drive.google.com/folderview?id= ... sp=sharing
I have made these Chinese language pets for Fathouse64 602
1. half-Chinese language pets:
enable you to display and input Chinese language under Fathouse64 602
a. SCIM input platform:
scim64_1.4.9-en-zh-precise-12.0.3.pet (19 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
b.Simplified Chinese:
Fathousr64-zhcn-12.0.3.pet (1.2 mb)
c. Traditional Chinese:
Fathouse64-zhhk-12.0.3.pet (1.4 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
I have also prepared a fcitx64 pet for Fathouse64 602 (fcitx64_4.2.0-en-zh-precise-12.0.0.pet). However, Fathouse64 602 becomes very unstable after installing fcitx64. Therefore usage of fcitx64 on Fathouse64 is not recommended.
Key features:
based on Lighthouse64 by Tazoc
kernel 3.18.5
3 browsers: Icecat, Seamonkey and Firefox
5 desktops: JWM, lxde and open-box already included, xfce and kde also available
compatable with slackware from 13.04 to 14.1
more information:
http://murga-linux.com/puppy/viewtopic.php?t=97393
download isoes:
Fathouse-retro
(Fathouse64-602.iso)
https://drive.google.com/folderview?id= ... sp=sharing
Extrasfs (Extrasfs.iso-2,-3)
https://drive.google.com/folderview?id= ... sp=sharing
Mariner602-b2(L64-3.18.5.iso)
https://drive.google.com/folderview?id= ... sp=sharing
I have made these Chinese language pets for Fathouse64 602
1. half-Chinese language pets:
enable you to display and input Chinese language under Fathouse64 602
a. SCIM input platform:
scim64_1.4.9-en-zh-precise-12.0.3.pet (19 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
b.Simplified Chinese:
Fathousr64-zhcn-12.0.3.pet (1.2 mb)
c. Traditional Chinese:
Fathouse64-zhhk-12.0.3.pet (1.4 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
I have also prepared a fcitx64 pet for Fathouse64 602 (fcitx64_4.2.0-en-zh-precise-12.0.0.pet). However, Fathouse64 602 becomes very unstable after installing fcitx64. Therefore usage of fcitx64 on Fathouse64 is not recommended.
Chinese Language Pets
peebee released lxpup64 15.03.01 on 8 Mar 2015
Key features:
experimental and based on alpha slacko64 (Slacko64-5.9.1) produced by 01micko
64bit version of Puppy with the LXDE desktop
with kernel 3.17.4 as produced by 666philb for TahrPup64
Built using the Porteus-3.0.1 64bit LXDE module
updated components: OpenBox, PCManFM + libfm, LxPanel, LxAppearance from pkgs.org
more information:
http://www.murga-linux.com/puppy/viewtopic.php?t=96875
download LxPup64-15.03.01-hybrid.iso (266 mb):
http://sourceforge.net/projects/lxpup/f ... o/download
I have made these Chinese language pets for LxPup64 15.03.01
1. half-Chinese language pets:
enable you to display and input Chinese language under LxPup64 15.03.01
a. fcitx input platform:
fcitx64_4.2.7-en-zh-raring-13.0.3.pet (21 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12, 2015)
b. SCIM input platform:
scim64_1.4.14-en-zh-raring-13.0.3.pet (18 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
lxpup64-15.03.01-zhcn-13.0.3.pet (1.8 mb)
d. Traditional Chinese:
lxpup64-15.03.01-zhhk-13.0.3.pet (1.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Key features:
experimental and based on alpha slacko64 (Slacko64-5.9.1) produced by 01micko
64bit version of Puppy with the LXDE desktop
with kernel 3.17.4 as produced by 666philb for TahrPup64
Built using the Porteus-3.0.1 64bit LXDE module
updated components: OpenBox, PCManFM + libfm, LxPanel, LxAppearance from pkgs.org
more information:
http://www.murga-linux.com/puppy/viewtopic.php?t=96875
download LxPup64-15.03.01-hybrid.iso (266 mb):
http://sourceforge.net/projects/lxpup/f ... o/download
I have made these Chinese language pets for LxPup64 15.03.01
1. half-Chinese language pets:
enable you to display and input Chinese language under LxPup64 15.03.01
a. fcitx input platform:
fcitx64_4.2.7-en-zh-raring-13.0.3.pet (21 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12, 2015)
b. SCIM input platform:
scim64_1.4.14-en-zh-raring-13.0.3.pet (18 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
lxpup64-15.03.01-zhcn-13.0.3.pet (1.8 mb)
d. Traditional Chinese:
lxpup64-15.03.01-zhhk-13.0.3.pet (1.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language pet
Further to Barry Kauler's released of Quirky (April) version 7.0.1 on Mar 5, 2015, version 7.0.2 was released on Mar 19, 2015
Key changes from 7.0.1:
Frugal install now faster bootup, faster saves.
SeaMonkey now version 2.33, significant bug-fixes.
Package upgrades: nss 3.17.4, sqlite 3.8.8.3
Internationalized: gfnrename, gmeasures (and bug-fix)
pupRadio: fixed preset radio stations.
GetFlash: fixed Adobe download URL change.
MoManager (internationalization tool): bug-fixes.
New semanticUI.ttf font added.
icu4c: icudt53l.dat data file size increased, fixes SM bug.
more information:
http://bkhome.org/news/?viewDetailed=00181
download iso（176 mb），xz（141 mb）files:
amd64
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.2/
x86
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.2/
I have tested and confirmed that the Chinese language pets for april 7.0.1 can handle 7.0.2 (32 bit and 64 bit):
1. half-Chinese language pets:
enable you to display and input Chinese language under april 7.0.2
a. fcitx input platform:
64 bit: fcitx64_4.2.7-en-zh-raring-13.0.2.pet (21 mb)
32 bit: fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12 and 19, 2015)
b. SCIM input platform:
64 bit: scim64_1.4.14-en-zh-raring-13.0.2.pet (18 mb)
32 bit: scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13 and 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c. Simplified Chinese:
64 bit: april64-7.0.1-zhcn-13.0.2.pet (2.4 mb)
32 bit: april-7.0.1-zhcn-12.0.0.pet (2.4 mb)
d. Traditional Chinese:
64 bit: april64-7.0.1-zhhk-13.0.2.pet (2.0 mb)
32 bit: april-7.0.1-zhhk-12.0.0.pet (2.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
1. for april64 7.0.2
after installing the half-Chinese language pet fcitx64_4.2.7-en-zh-raring-13.0.2.pet, fcitx cannot run in urxvt terminal but can run in lxterminal. In order to provide Chinese input under terminal, lxterminal is installed and available in the fcitx64_4.2.7-en-zh-raring-13.0.2.pet.
Key changes from 7.0.1:
Frugal install now faster bootup, faster saves.
SeaMonkey now version 2.33, significant bug-fixes.
Package upgrades: nss 3.17.4, sqlite 3.8.8.3
Internationalized: gfnrename, gmeasures (and bug-fix)
pupRadio: fixed preset radio stations.
GetFlash: fixed Adobe download URL change.
MoManager (internationalization tool): bug-fixes.
New semanticUI.ttf font added.
icu4c: icudt53l.dat data file size increased, fixes SM bug.
more information:
http://bkhome.org/news/?viewDetailed=00181
download iso（176 mb），xz（141 mb）files:
amd64
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.2/
x86
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.2/
I have tested and confirmed that the Chinese language pets for april 7.0.1 can handle 7.0.2 (32 bit and 64 bit):
1. half-Chinese language pets:
enable you to display and input Chinese language under april 7.0.2
a. fcitx input platform:
64 bit: fcitx64_4.2.7-en-zh-raring-13.0.2.pet (21 mb)
32 bit: fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12 and 19, 2015)
b. SCIM input platform:
64 bit: scim64_1.4.14-en-zh-raring-13.0.2.pet (18 mb)
32 bit: scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13 and 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c. Simplified Chinese:
64 bit: april64-7.0.1-zhcn-13.0.2.pet (2.4 mb)
32 bit: april-7.0.1-zhcn-12.0.0.pet (2.4 mb)
d. Traditional Chinese:
64 bit: april64-7.0.1-zhhk-13.0.2.pet (2.0 mb)
32 bit: april-7.0.1-zhhk-12.0.0.pet (2.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
1. for april64 7.0.2
after installing the half-Chinese language pet fcitx64_4.2.7-en-zh-raring-13.0.2.pet, fcitx cannot run in urxvt terminal but can run in lxterminal. In order to provide Chinese input under terminal, lxterminal is installed and available in the fcitx64_4.2.7-en-zh-raring-13.0.2.pet.
Chinese Language Pets
peebee release lxpup 15.03.01 on Mar 22, 2015
Key features:
LXDE desktop environment
Openbox as window manager
LxPanelX as panel manager
PCManFM as file manager
based on Slackware-14.1 (Slacko6-Beta2)
kernel 3.4.94 (no-pae) and 3.17.7(pae)
new default background, flat-remix iconset, Windows8OB window decoration, xfce-dawn gtk2 widgets
upadated ppm and pup-sys-info
more information: http://www.murga-linux.com/puppy/viewto ... &start=570
download LxPup-15.03.1-s-nopae.iso and LxPup-15.03.1-s-pae.iso (both 210 mb)
http://lx-pup.weebly.com/slacko60.html
I have created these Chinese language pets for lxpup 15.03.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpup 15.03.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.1.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpup-15.03.01-zhcn-12.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpup-15.03.01-zhhk-12.0.1.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Key features:
LXDE desktop environment
Openbox as window manager
LxPanelX as panel manager
PCManFM as file manager
based on Slackware-14.1 (Slacko6-Beta2)
kernel 3.4.94 (no-pae) and 3.17.7(pae)
new default background, flat-remix iconset, Windows8OB window decoration, xfce-dawn gtk2 widgets
upadated ppm and pup-sys-info
more information: http://www.murga-linux.com/puppy/viewto ... &start=570
download LxPup-15.03.1-s-nopae.iso and LxPup-15.03.1-s-pae.iso (both 210 mb)
http://lx-pup.weebly.com/slacko60.html
I have created these Chinese language pets for lxpup 15.03.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpup 15.03.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.1.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpup-15.03.01-zhcn-12.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpup-15.03.01-zhhk-12.0.1.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Further to the release of lxpup 15.03.01 on Mar 22, 2015, peebee also released LxPupTahr 15.03.1 on Mar 24, 2015
this includes Tahrpup updates up to Mar 22, 2015
more information:
http://murga-linux.com/puppy/viewtopic. ... 680#835680
download iso LxPupTahr-15.03.1-pae.iso and LxPupTahr-15.03.1-pae.iso (both 238 mb)
http://lx-pup.weebly.com/upup-tahr.html
I have created these Chinese language pets for LxPupTahr 15.03.1:
1. half-Chinese language pets:
enable you to display and input Chinese under LxPupTahr 15.03.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.1.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpuptahr-15.03.01-zhcn-12.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpuptahr-15.03.01-zhhk-12.0.1.pet (3.2 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
this includes Tahrpup updates up to Mar 22, 2015
more information:
http://murga-linux.com/puppy/viewtopic. ... 680#835680
download iso LxPupTahr-15.03.1-pae.iso and LxPupTahr-15.03.1-pae.iso (both 238 mb)
http://lx-pup.weebly.com/upup-tahr.html
I have created these Chinese language pets for LxPupTahr 15.03.1:
1. half-Chinese language pets:
enable you to display and input Chinese under LxPupTahr 15.03.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.1.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpuptahr-15.03.01-zhcn-12.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpuptahr-15.03.01-zhhk-12.0.1.pet (3.2 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
gray released tahrNOP-2_6.0.2 on Mar 10, 2015； and tahrNOP-2_6.0.2a on Mar 22, 2015
NOP is an XFCE based puplet
no frills pup without office apps
target is to install to USB pendrive and add an SFS file of the office package (Libre Office, Softmaker etc).
based on Tahr 6.0.2 PAE (kernel 3.14.20) with the new XFCE 4.12 desktop
added:
ffmpeg, mplayer and Pwidgets 2.5.6
deleted
all games, abiword, gnumeric, homebank, notecase, planner, geany, osmo, VLC, gstreamer, Qt, Python
more information:
http://www.murga-linux.com/puppy/viewto ... 177bcdd3dd
download iso tahrNOP-2_6.0.2.iso (183 mb)
http://download.tuxfamily.org/nop
I have created these Chinese language pets for tahrNOP-2_6.0.2:
1. half-Chinese language pets:
enable you to display and input Chinese under tahrNOP-2_6.0.2:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (21 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
tahr-6.0.22a-zhcn-13.0.1.pet (2.9 mb)
d. Traditional Chinese:
tahr-6.0.22a-zhhk-13.0.1.pet (2.5 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
NOP is an XFCE based puplet
no frills pup without office apps
target is to install to USB pendrive and add an SFS file of the office package (Libre Office, Softmaker etc).
based on Tahr 6.0.2 PAE (kernel 3.14.20) with the new XFCE 4.12 desktop
added:
ffmpeg, mplayer and Pwidgets 2.5.6
deleted
all games, abiword, gnumeric, homebank, notecase, planner, geany, osmo, VLC, gstreamer, Qt, Python
more information:
http://www.murga-linux.com/puppy/viewto ... 177bcdd3dd
download iso tahrNOP-2_6.0.2.iso (183 mb)
http://download.tuxfamily.org/nop
I have created these Chinese language pets for tahrNOP-2_6.0.2:
1. half-Chinese language pets:
enable you to display and input Chinese under tahrNOP-2_6.0.2:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (21 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
tahr-6.0.22a-zhcn-13.0.1.pet (2.9 mb)
d. Traditional Chinese:
tahr-6.0.22a-zhhk-13.0.1.pet (2.5 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Further to my post on Feb 27, 2015 about lxpup precise 14.12.1, peebee has updated lxpup precise to lxpupprecise-15.02.1 on Mar 22, 2015.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpupprecise 15.02.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpupprecise 15.02.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpupprecise-15.02.01-zhcn-12.0.0.pet (3.6 mb)
d. Traditional Chinese:
lxpupprecise-15.02.01-zhhk-12.0.0.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpupprecise 15.02.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpupprecise 15.02.1:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpupprecise-15.02.01-zhcn-12.0.0.pet (3.6 mb)
d. Traditional Chinese:
lxpupprecise-15.02.01-zhhk-12.0.0.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Last edited by icake on Wed 15 Apr 2015, 13:20, edited 1 time in total.
Chinese Language Pets
Further to my post on Feb 27, 2015 about lxpup precise 14.12.1, peebee has updated lxpup unicorn to lxpupunicorn-15.02.1 on Mar 22, 2015.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpupunicorn 15.02.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpupunicorn 15.02.1:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (24 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpupunicorn-15.02.01-zhcn-13.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpupunicorn-15.02.01-zhhk-13.0.1.pet (3.2 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpupunicorn 15.02.1:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpupunicorn 15.02.1:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (24 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpupunicorn-15.02.01-zhcn-13.0.1.pet (3.6 mb)
d. Traditional Chinese:
lxpupunicorn-15.02.01-zhhk-13.0.1.pet (3.2 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Further to my post on Feb 27, 2015 about lxpup precise 14.12.1, peebee has updated lxpup slacko to lxpup-14.03-s on Mar 22, 2015.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpup 14.03-s:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpup 14.03-s:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpup-14.03.s-zhcn-12.0.0.pet (3.6 mb)
d. Traditional Chinese:
lxpup-14.03.s-zhhk-12.0.0.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information:
http://murga-linux.com/puppy/viewtopic. ... &start=570
download isoes:
http://lx-pup.weebly.com/upup-precise.html
I have created these Chinese language pets for lxpup 14.03-s:
1. half-Chinese language pets:
enable you to display and input Chinese under lxpup 14.03-s:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
lxpup-14.03.s-zhcn-12.0.0.pet (3.6 mb)
d. Traditional Chinese:
lxpup-14.03.s-zhhk-12.0.0.pet (3.1 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Further to Barry Kauler's released of Quirky (April) version 7.0.1 on Mar 5, 2015 and 7.0.2 on Mar 19, 2015, version 7.0.3 was released on April 9, 2015.
Key changes from 7.0.2:
April64 build has kernel 3.19.2, with EFI support.
probepart, probedisk utilities have EFI fix.
openssl security upgrade.
Frugal/live-CD save-session now option ask at shutdown.
xclip, Gparted, popup, dmidecode upgraded.
Fixed missing xsane executable.
New apps Pup-SysInfo (replace Hardinfo), Prun.
Pschedule fix.
installquirky new GUI installer.
more information:
http://bkhome.org/news/
download iso（176 mb），xz（148 mb）files:
amd64
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.3/
x86
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.3/
I have made these Chinese language pets for april 7.0.3:
1. half-Chinese language pets:
enable you to display and input Chinese language under april 7.0.3
a. fcitx input platform:
64 bit: fcitx64_4.2.7-en-zh-raring-13.0.2.pet (21 mb)
32 bit: fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12 and 19, 2015)
b. SCIM input platform:
64 bit: scim64_1.4.14-en-zh-raring-13.0.2.pet (18 mb)
32 bit: scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13 and 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c. Simplified Chinese:
64 bit: april64-7.0.3-zhcn-13.0.2.pet (2.4 mb)
32 bit: april-7.0.3-zhcn-12.0.0.pet (2.4 mb)
d. Traditional Chinese:
64 bit: april64-7.0.3-zhhk-13.0.2.pet (2.0 mb)
32 bit: april-7.0.3-zhhk-12.0.0.pet (2.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
1. for april64 7.0.3
after installing the half-Chinese language pet fcitx64_4.2.7-en-zh-raring-13.0.2.pet, fcitx cannot run in urxvt terminal but can run in lxterminal. In order to provide Chinese input under terminal, lxterminal needs to be installed and its already included in the fcitx64_4.2.7-en-zh-raring-13.0.2.pet.
Key changes from 7.0.2:
April64 build has kernel 3.19.2, with EFI support.
probepart, probedisk utilities have EFI fix.
openssl security upgrade.
Frugal/live-CD save-session now option ask at shutdown.
xclip, Gparted, popup, dmidecode upgraded.
Fixed missing xsane executable.
New apps Pup-SysInfo (replace Hardinfo), Prun.
Pschedule fix.
installquirky new GUI installer.
more information:
http://bkhome.org/news/
download iso（176 mb），xz（148 mb）files:
amd64
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.3/
x86
http://distro.ibiblio.org/quirky/quirky ... ril-7.0.3/
I have made these Chinese language pets for april 7.0.3:
1. half-Chinese language pets:
enable you to display and input Chinese language under april 7.0.3
a. fcitx input platform:
64 bit: fcitx64_4.2.7-en-zh-raring-13.0.2.pet (21 mb)
32 bit: fcitx_4.2.0-en-zh-precise-12.0.0.pet (19 mb)
with 16 Chinese input methods ( for more details, please see post dated Feb 12 and 19, 2015)
b. SCIM input platform:
64 bit: scim64_1.4.14-en-zh-raring-13.0.2.pet (18 mb)
32 bit: scim_1.4.9-en-zh-precise-12.0.0.pet (22 mb)
with 23 Chinese input methods ( for more details, please see post dated Feb 13 and 19, 2015)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c. Simplified Chinese:
64 bit: april64-7.0.3-zhcn-13.0.2.pet (2.4 mb)
32 bit: april-7.0.3-zhcn-12.0.0.pet (2.4 mb)
d. Traditional Chinese:
64 bit: april64-7.0.3-zhhk-13.0.2.pet (2.0 mb)
32 bit: april-7.0.3-zhhk-12.0.0.pet (2.0 mb)
All these half-Chinese pets (in half-Chinese folder) and Chinese language pets (in Simplified Chinese or Traditional Chinese folder) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Known issues:
1. for april64 7.0.3
after installing the half-Chinese language pet fcitx64_4.2.7-en-zh-raring-13.0.2.pet, fcitx cannot run in urxvt terminal but can run in lxterminal. In order to provide Chinese input under terminal, lxterminal needs to be installed and its already included in the fcitx64_4.2.7-en-zh-raring-13.0.2.pet.
Chinese Language Pets
pirohmaniac released electropup-1 on April 14, 2015.
key features:
based on tahr 6.0.2
added :
schematic electronic design software Ardunino IDE and Fritzing
Zarfy screen resolution and multiple monitor setups tool
desktop icons for Arduino and Fritzing
more information:
http://murga-linux.com/puppy/viewtopic. ... 8cfb17c261
download Electropup1.iso (345 mb):
https://drive.google.com/file/d/0B7m5Tn ... sp=sharing
I have created these Chinese language pets for electropup-1:
1. half-Chinese language pets:
enable you to display and input Chinese under electropup-1:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (21 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
electropup-1-zhcn-13.0.1.pet (2.9 mb)
d. Traditional Chinese:
electropup-1-zhhk-13.0.1.pet (2.5 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
key features:
based on tahr 6.0.2
added :
schematic electronic design software Ardunino IDE and Fritzing
Zarfy screen resolution and multiple monitor setups tool
desktop icons for Arduino and Fritzing
more information:
http://murga-linux.com/puppy/viewtopic. ... 8cfb17c261
download Electropup1.iso (345 mb):
https://drive.google.com/file/d/0B7m5Tn ... sp=sharing
I have created these Chinese language pets for electropup-1:
1. half-Chinese language pets:
enable you to display and input Chinese under electropup-1:
a. fcitx input platform:
fcitx_4.2.7-en-zh-raring-13.0.1.pet (21 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.14-en-zh-raring-13.0.1.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
electropup-1-zhcn-13.0.1.pet (2.9 mb)
d. Traditional Chinese:
electropup-1-zhhk-13.0.1.pet (2.5 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
zagreb999 released zagreb 2 on April 22, 2015
Key features:
based on xslacko
xfce4.12
kernal 3.19.2
a lightweigt puppy
more information:
http://www.murga-linux.com/puppy/viewtopic.php?t=98835
download iso (250 mb):
http://www.megafileupload.com/1OnA/zagreb2.iso
I have created these Chinese language pets for zagreb 2:
1. half-Chinese language pets:
enable you to display and input Chinese under zagreb 2:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.2.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.2.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
zagreb-2-zhcn-12.0.2.pet (3.5 mb)
d. Traditional Chinese:
zagreb-2-zhhk-12.0.2.pet (2.9 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Key features:
based on xslacko
xfce4.12
kernal 3.19.2
a lightweigt puppy
more information:
http://www.murga-linux.com/puppy/viewtopic.php?t=98835
download iso (250 mb):
http://www.megafileupload.com/1OnA/zagreb2.iso
I have created these Chinese language pets for zagreb 2:
1. half-Chinese language pets:
enable you to display and input Chinese under zagreb 2:
a. fcitx input platform:
fcitx_4.2.0-en-zh-precise-12.0.2.pet (19 mb)
with 16 Chinese input methods (please see posting dated 19 Feb for more details)
b. scim input platform:
scim_1.4.9-en-zh-precise-12.0.2.pet (22 mb)
with 23 Chinese input methods (please see posting dated 19 Feb for more details)
2. Chinese language pets (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels:
c. Simplified Chinese:
zagreb-2-zhcn-12.0.2.pet (3.5 mb)
d. Traditional Chinese:
zagreb-2-zhhk-12.0.2.pet (2.9 mb)
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Fatdog64-701 was released on 22 April 2015 by Kirk and Jamesbond.
Overview:
second release of Fatdog64 700 series
mainly an update release
same kernel as 700, modules, nvidia and radeon drivers will continue to work.
Changes from Fatdog64 700:
Updates:
Xorg-1.16.3
Mesa-10.4.7
GTK 2.24.27
Seamonkey 2.33.1
Flash plugin 11.2.202.457
Sandbox now runs with separate pid/mount namespace for better sandboxing
xf86-input-evdev rebuilt with code-remap support, enabling hotkey mapping for keys previously unmappable
ROX-Filer updated with mikeb patch for i18n
ROX-Filer updated to be able to show file comments
links can use framebuffer other than the first one (use FRAMEBUFFER=/dev/fb1 or something)
New features:
Find'N'Run script included, accessible by Alt-F3 hotkey (thanks SFR)
Internet tethering using USB or bluetooth (under Control Panel → Network) - tested with Android phones only.
Fatdog startup manager to control desktop startup programs (find under Control Panel → Desktop → Fatdog Startup Manager)
MTP browser and simple-mtpfs now included providing out of box support for MTP devices (find under Control Panel → Network)
Meld (GUI file difference viewer) is now included in devx. sshuttle also added to devx.
scrypt and scrypt_gui for better password protection
PSIP 1.4 now included
pmcputemp included (thanks 01micko) - activate it using Fatdog startup manager
bugreport.sh - information reporting tool for reporting bugs.
deb2txz script included - compatible .deb packages can now be installed directly (by right-click).
n2n-v1 (easy vpn)
rox-encfs now uses afo when available (afo is also included)
Faster version of makepkg; pkgtools now supports uninstall script (name it as install/slack-uninstall.sh). Still 100% compatible with plain slackware package.
and numerous bug fixes and fine tunings.
more information:
http://murga-linux.com/puppy/viewtopic.php?t=97855
download Fatdog64-701.iso (260 mb):
http://distro.ibiblio.org/fatdog/iso/
I have made these Chinese language txz for fatdog64 701
1. half-Chinese language txzes:
enable you to display and input Chinese language under fatdog64 701
a. fcitx input platform:
fd64-7.0.1-fcitx64_4.2.7-en-zh-raring-13.0.3.txz (15 mb)
with 16 Chinese input methods, modified from fcitx64_4.2.7-en-zh-raring-13.0.3.pet to handle fatdog64 701 ( for more details, please see post dated Feb 19, 2015)
b. SCIM input platform:
fd64-7.0.1-scim64_1.4.14-en-zh-raring-13.0.3.txz (11 mb)
with 23 Chinese input methods modified from SCIM64_1.4.14-en-zh-raring-13.0.3.pet to handle fatdog64 701 ( for more details, please see post dated Feb 19, 2015)
2. Chinese language txzes (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
fd64-7.0.1-zhcn-13.0.3.txz (1.2 mb)
d. Traditional Chinese:
fd64-7.0.1-zhhk-13.0.3.txz (0.7 mb)
All these half-Chinese (inside the half-Chinese language pets folder) and Chinese language pets
(inside the Simplified Chinese and Traditional Chinese folders) are now available for download from the public sharing folders. Please see the first posting for download addresses.
Overview:
second release of Fatdog64 700 series
mainly an update release
same kernel as 700, modules, nvidia and radeon drivers will continue to work.
Changes from Fatdog64 700:
Updates:
Xorg-1.16.3
Mesa-10.4.7
GTK 2.24.27
Seamonkey 2.33.1
Flash plugin 11.2.202.457
Sandbox now runs with separate pid/mount namespace for better sandboxing
xf86-input-evdev rebuilt with code-remap support, enabling hotkey mapping for keys previously unmappable
ROX-Filer updated with mikeb patch for i18n
ROX-Filer updated to be able to show file comments
links can use framebuffer other than the first one (use FRAMEBUFFER=/dev/fb1 or something)
New features:
Find'N'Run script included, accessible by Alt-F3 hotkey (thanks SFR)
Internet tethering using USB or bluetooth (under Control Panel → Network) - tested with Android phones only.
Fatdog startup manager to control desktop startup programs (find under Control Panel → Desktop → Fatdog Startup Manager)
MTP browser and simple-mtpfs now included providing out of box support for MTP devices (find under Control Panel → Network)
Meld (GUI file difference viewer) is now included in devx. sshuttle also added to devx.
scrypt and scrypt_gui for better password protection
PSIP 1.4 now included
pmcputemp included (thanks 01micko) - activate it using Fatdog startup manager
bugreport.sh - information reporting tool for reporting bugs.
deb2txz script included - compatible .deb packages can now be installed directly (by right-click).
n2n-v1 (easy vpn)
rox-encfs now uses afo when available (afo is also included)
Faster version of makepkg; pkgtools now supports uninstall script (name it as install/slack-uninstall.sh). Still 100% compatible with plain slackware package.
and numerous bug fixes and fine tunings.
more information:
http://murga-linux.com/puppy/viewtopic.php?t=97855
download Fatdog64-701.iso (260 mb):
http://distro.ibiblio.org/fatdog/iso/
I have made these Chinese language txz for fatdog64 701
1. half-Chinese language txzes:
enable you to display and input Chinese language under fatdog64 701
a. fcitx input platform:
fd64-7.0.1-fcitx64_4.2.7-en-zh-raring-13.0.3.txz (15 mb)
with 16 Chinese input methods, modified from fcitx64_4.2.7-en-zh-raring-13.0.3.pet to handle fatdog64 701 ( for more details, please see post dated Feb 19, 2015)
b. SCIM input platform:
fd64-7.0.1-scim64_1.4.14-en-zh-raring-13.0.3.txz (11 mb)
with 23 Chinese input methods modified from SCIM64_1.4.14-en-zh-raring-13.0.3.pet to handle fatdog64 701 ( for more details, please see post dated Feb 19, 2015)
2. Chinese language txzes (require the prior installation of an half-Chinese language pet, item a or b above):
enable you to display Chinese in desktop menus, sub-menus, icon labels
c.Simplified Chinese:
fd64-7.0.1-zhcn-13.0.3.txz (1.2 mb)
d. Traditional Chinese:
fd64-7.0.1-zhhk-13.0.3.txz (0.7 mb)
All these half-Chinese (inside the half-Chinese language pets folder) and Chinese language pets
(inside the Simplified Chinese and Traditional Chinese folders) are now available for download from the public sharing folders. Please see the first posting for download addresses.