Since you are using a flash drive, should this not have been sdb2? Or does your machine not have a hard drive?spandey wrote:The new argument uses UUID instead of sda2.
The savefile is in root of sda2.
Fatdog64-600 Final and 601 (July 2012)
- Bill_Gates
- Posts: 162
- Joined: Wed 31 Jan 2007, 22:31
- Location: Medina, Washington
Running Fatdog601 -- Firefox version -- with a 512MB ext4 save file in sda3, but do not see a "Resize save file" option. I really want to add 1GB of space to my save file, but do not understand how to do it with this system.
I"ve read the manpages and the FAQ, but afraid I either missed the easy version or did not understand.
Help?
-Roy
I"ve read the manpages and the FAQ, but afraid I either missed the easy version or did not understand.
Help?
-Roy
- Bill_Gates
- Posts: 162
- Joined: Wed 31 Jan 2007, 22:31
- Location: Medina, Washington
Is there a way to PREVENT Fatdog from saving the session? I tried adding the following code which I found here on the board some time ago to the rc.shutdown script. It works fine with Slacko and Lucid Puppy but Fatdog doesn't seem to like it.
Code: Select all
dialog --timeout 10 --yesno 'Save this session?
(auto save in 10 seconds...)' 0 0 >/dev/console
if [ $? -eq 1 ];then
echo "Session saving cancelled" >/dev/console
else
echo "Saving session to $SAVEFILE (${SAVEPART})..." >/dev/console
/usr/sbin/snapmergepuppy /initrd/pup_ro1 /initrd/pup_rw
fi
-Bill
[b][i]"Who needs M$ - Puppy Rules!"[/i][/b] :P
[b][i]"Who needs M$ - Puppy Rules!"[/i][/b] :P
gtkdialog-0.8.2 for FD64.
Rename /usr/bin/gtkdialog to /usr/bin/gtkdialog-old just for safekeeping then install:
http://www.smokey01.com/software/Fatdog ... -0.8.2.pet
Rename /usr/bin/gtkdialog to /usr/bin/gtkdialog-old just for safekeeping then install:
http://www.smokey01.com/software/Fatdog ... -0.8.2.pet
Try this: http://www.smokey01.com/software/Fatdog ... 4-0.79.petBill_Gates wrote:Is there a PET out there for Figaro’s password Manager? My attempts to download and install the source code have been fruitless to say the least!
I haven't really tested it but it worked when I clicked on the binary.
Cheers.
FD64 contains the driver for a Cohiba/aka you-name-it/ ...and Netgear wg111 - apparently, although it's a struggle to get it staying alight. Some claims on the InterWeb that Netgear doesn't/didn't do a 64bit driver, but those comments may refer to the devil's OS. Whatever, cannot get this dongle to run in Mint, so would appreciate some guidance from those who actually know what they're doing, please, together with a raw (not .raw) driver!
As usual, your first step is to run "lsusb" and determine the vendor:product ID codes for this device.Sage wrote:FD64 contains the driver for a Cohiba/aka you-name-it/ ...and Netgear wg111
Then run "dmesg | grep firmware"
Does this device work in 32-bit Puppies?
Last edited by rcrsn51 on Tue 02 Oct 2012, 17:24, edited 2 times in total.
irishrm & rcrsn51,
That worked great! Thank you very much!
I am setting up this laptop for a friend (read: New Puppy Convert) and she really likes the speed of it. Says she doesn't really want Windows any more.....
One other non-pressing issue is that she wanted a program to view and capture images with her webcam.... rcrsn51's gucview filled the bill nicely!
But the default jpeg images from that program are not supported by fotoxx image viewer, so I had to change gucview's default to png for it to work.
I want to thank everyone concerned with this version -- and the Puppy community as a whole -- for the thoughtfulness and hard work involved in bringing these things to the masses.
-Roy
That worked great! Thank you very much!
I am setting up this laptop for a friend (read: New Puppy Convert) and she really likes the speed of it. Says she doesn't really want Windows any more.....
One other non-pressing issue is that she wanted a program to view and capture images with her webcam.... rcrsn51's gucview filled the bill nicely!
But the default jpeg images from that program are not supported by fotoxx image viewer, so I had to change gucview's default to png for it to work.
I want to thank everyone concerned with this version -- and the Puppy community as a whole -- for the thoughtfulness and hard work involved in bringing these things to the masses.
-Roy
- Bill_Gates
- Posts: 162
- Joined: Wed 31 Jan 2007, 22:31
- Location: Medina, Washington
Thank You smokey01, that worked like a charm!smokey01 wrote: Try this: http://www.smokey01.com/software/Fatdog ... 4-0.79.pet
I haven't really tested it but it worked when I clicked on the binary.
Cheers.
-Bill
[b][i]"Who needs M$ - Puppy Rules!"[/i][/b] :P
[b][i]"Who needs M$ - Puppy Rules!"[/i][/b] :P
Update on USB install:
I'm running fatdog64-600 on a usb install with the USB being regarded as a hard-drive. (see earlier posts)
While experimenting I discovered that If I place the savefile on the hard-drive It is recognized at boot.
If I have a savefile on the USB and on the hard-drive they are both recognized and I am given the option of which savefile to load.
So now I'm booting from the USB with the savefile being loaded from the hard-drive.
This means that there is no worries about USB failure and I have a very fast boot and shut-down time.
I have tried to replicate this with other puppies, using various commands I googled from the forum, but with no success.
If anyone can tell me how this can be done I would love to know.
irishrm.
I'm running fatdog64-600 on a usb install with the USB being regarded as a hard-drive. (see earlier posts)
While experimenting I discovered that If I place the savefile on the hard-drive It is recognized at boot.
If I have a savefile on the USB and on the hard-drive they are both recognized and I am given the option of which savefile to load.
So now I'm booting from the USB with the savefile being loaded from the hard-drive.
This means that there is no worries about USB failure and I have a very fast boot and shut-down time.
I have tried to replicate this with other puppies, using various commands I googled from the forum, but with no success.
If anyone can tell me how this can be done I would love to know.
irishrm.
Many thanks, rcrsn51, for leaping to the rescue again!
My enquiry really relates to 64bit issues (I think!). Loads of good stuff on this device on LinuxQuestions.org (not all of which I understand and some that refers to Wdoze which I completely abandoned half a decade back).
It seems to be listed for WEP/WPA-PSK but I have my router configured for WPA2+ only. Doesn't affect 32bit operation in Puppy when WPA2+ is selected.
- done that, it's recognised, but presume 64bit kernel has the p54 (Prism54) in common?As usual, your first step is to run "lsusb"
Yes! I did actually report that somewhere within the last month?Does this device work in 32-bit Puppies?
My enquiry really relates to 64bit issues (I think!). Loads of good stuff on this device on LinuxQuestions.org (not all of which I understand and some that refers to Wdoze which I completely abandoned half a decade back).
It seems to be listed for WEP/WPA-PSK but I have my router configured for WPA2+ only. Doesn't affect 32bit operation in Puppy when WPA2+ is selected.
@Sage:
1. What are the [vendor:product] ID codes? I need more than "Cohiba/aka you-name-it/ ...and Netgear wg111"
2. Is the p54usb module getting loaded?
3. What does the command "dmesg | grep firmware" report?
4. In what Puppy version is the device confirmed to work?
5. What exactly is its problem in Fatdog? It never connects? It drops out?
6. Please explain this comment from your first post.
1. What are the [vendor:product] ID codes? I need more than "Cohiba/aka you-name-it/ ...and Netgear wg111"
2. Is the p54usb module getting loaded?
3. What does the command "dmesg | grep firmware" report?
4. In what Puppy version is the device confirmed to work?
5. What exactly is its problem in Fatdog? It never connects? It drops out?
6. Please explain this comment from your first post.
. Whatever, cannot get this dongle to run in Mint,
I've been looking for a really good search application for some time and last night I discovered recoll.
It's a bit big at 2.8M, needs qt4 but wow it's fast and impressive.
I found documents last night I have been looking for for ages. It can take a little while to build the index, which also takes up some disk space but locating files is instantaneous. You could symlink the database outside of the save file, I guess.
For me, this ones a keeper.
http://www.smokey01.com/software/Fatdog ... 1.17.3.pet
It's a bit big at 2.8M, needs qt4 but wow it's fast and impressive.
I found documents last night I have been looking for for ages. It can take a little while to build the index, which also takes up some disk space but locating files is instantaneous. You could symlink the database outside of the save file, I guess.
For me, this ones a keeper.
http://www.smokey01.com/software/Fatdog ... 1.17.3.pet
- Attachments
-
- recoll.jpg
- (62.03 KiB) Downloaded 990 times
wpa_gui vs Network Wizard
Hello, I've been running Fatdog64-601 off my thumbdrive for about 1 week (still offloading stuff from my 521 build).
I noticed that with wpa_gui, if I close out of my browser, the LAN connection drops off. When I open the browser it re-establishes the connection. It also seems that if I'm on a webpage for a particularly long time, the connection drops and then re-connects when I click on the 'back' arrow or go to a different website.
With Network Wizard (I shut down wpa_gui), the connection seems consistently on (which is good). I'm inclined to use Network Wizard, however I noticed new issue when I use Netword Wizard, my localhost Xampp webserver hangs and never loads the page. When I switch back to wpa_gui, the localhost webpage loads right up.
I have a Toshiba Satellite L755-S5216 laptop. Fatdog sees my wireless NIC as an 'Realtek rtl8192ce'. Any ideas? Thanks in advance!
I'm using XAMPP for Linux 1.8.1 found at:
http://www.apachefriends.org/download.p ... 8.1.tar.gz
I noticed that with wpa_gui, if I close out of my browser, the LAN connection drops off. When I open the browser it re-establishes the connection. It also seems that if I'm on a webpage for a particularly long time, the connection drops and then re-connects when I click on the 'back' arrow or go to a different website.
With Network Wizard (I shut down wpa_gui), the connection seems consistently on (which is good). I'm inclined to use Network Wizard, however I noticed new issue when I use Netword Wizard, my localhost Xampp webserver hangs and never loads the page. When I switch back to wpa_gui, the localhost webpage loads right up.
I have a Toshiba Satellite L755-S5216 laptop. Fatdog sees my wireless NIC as an 'Realtek rtl8192ce'. Any ideas? Thanks in advance!
I'm using XAMPP for Linux 1.8.1 found at:
http://www.apachefriends.org/download.p ... 8.1.tar.gz
That's a bug, when you quit or don't use the wpa_gui, the local loop-back is not setup. That will be fixed in the next release. I've attached a pet to fix that. I don't have any helpful ideas about the other problem.I'm inclined to use Network Wizard, however I noticed new issue when I use Netword Wizard, my localhost Xampp webserver hangs and never loads the page. When I switch back to wpa_gui, the localhost webpage loads right up.
- Attachments
-
- wpa_gui-fix.pet
- Fix for loop-back device.
- (1.35 KiB) Downloaded 740 times