Lucid Puppy Revitalized as 5.2.8.7 - Nov., 2017 - Final
updating 3hd .6 to .7 versions
Can I just copy the initrd, vmlinuz and sfs files to my existing 3hd 5.2.8.6 directory( and edit menu.lst or sylinux.cfg of course)? What about savefile compatibility?
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Re: updating 3hd .6 to .7 versions
Obviously make a copy of your savefile before trying it.Snail wrote:Can I just copy the initrd, vmlinuz and sfs files to my existing 3hd 5.2.8.6 directory( and edit menu.lst or sylinux.cfg of course)? What about savefile compatibility?
I found that it was compatible, with at least the 5.2.8.7.
When I moved to LupuSuper1, I decided to start a fresh savefile, to remove all the non-user files "crud" that eventually accumulates in them...
As for the install, I think that's pretty much what I did. (I may have had puppy do an install in a new folder, just to make sure, then moved those contents over to replace the old...verifying the grub bits and paths)
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
3HD upgrade to 5.2.8.7
Thanks for the encouragement, I'll give it a try.
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Hi Rerwin (and others).
After doing my upgrade to Sulu1, I realized that I hadn't installed my HP Laserjet 1020. It's a new savefile, so all my old baggage is gone.
I seem to have forgotten what magic I did to get it running under 5.28.
I tinkered a bit, and then uninstalled all the various drivers I tried, and added only foo2xxx_rcrsn-2014.pet
I get a handshake "cycle" when I start up, but when I try to print I get
Under 5.28.005 (or earlier -- I simply used my old save file), I also had some HP drive (hpijs3.11.1.d-something -- I tried adding that, but didn't work).
Am I missing something obvious?
After doing my upgrade to Sulu1, I realized that I hadn't installed my HP Laserjet 1020. It's a new savefile, so all my old baggage is gone.
I seem to have forgotten what magic I did to get it running under 5.28.
I tinkered a bit, and then uninstalled all the various drivers I tried, and added only foo2xxx_rcrsn-2014.pet
I get a handshake "cycle" when I start up, but when I try to print I get
Code: Select all
stopped
"Empty print file!"
Am I missing something obvious?
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
All of the lupus contain the HP support packages hpliplite-3.14.3 and hpliplite_plugin_install-1.2 in an attempt to support many HP printers. My printer experience consists only of installing my HP printers in CUPS. What happens when you do that?RetroTechGuy wrote:After doing my upgrade to Sulu1, I realized that I hadn't installed my HP Laserjet 1020. It's a new savefile, so all my old baggage is gone.
I seem to have forgotten what magic I did to get it running under 5.28.
I tinkered a bit, and then uninstalled all the various drivers I tried, and added only foo2xxx_rcrsn-2014.pet
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Hi Rerwin, I had been flailing at this, and asked in the printer thread.rerwin wrote:All of the lupus contain the HP support packages hpliplite-3.14.3 and hpliplite_plugin_install-1.2 in an attempt to support many HP printers. My printer experience consists only of installing my HP printers in CUPS. What happens when you do that?RetroTechGuy wrote:After doing my upgrade to Sulu1, I realized that I hadn't installed my HP Laserjet 1020. It's a new savefile, so all my old baggage is gone.
I seem to have forgotten what magic I did to get it running under 5.28.
I tinkered a bit, and then uninstalled all the various drivers I tried, and added only foo2xxx_rcrsn-2014.pet
Rcrsn51 came up with the answer. I gave a report of what I did to make sure it went in clean (I have noticed that this printer sometimes gets confused when tinkering with drivers, if you don't power cycle the printer and reboot the Puppy).
So, this is using Sulu1:
http://www.murga-linux.com/puppy/viewto ... 228#824228
Thanks to both of you for all of your help!
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
I didn't get a change to test Rerwin's answer (so I can't tell if that would have worked also -- don't mess with it once working... )Puppyt wrote:yeah - rcrsn51 rocks
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
BTW, I thought that I should give a Sulu1 report.
I have it on my desktops, and my general observation is that it doesn't seem to bog down the hardware as much as the Lupu 5.28.005 (and that was an improvement over older versions).
The only thing that makes the machine struggle is Firefox (which I think tends to exhibit memory leaks -- and I think the browser always has -- all the way back to the days of NyetScrape -- IIRC, that was the only program that ever crashed my Debian 1.3 install ).
Though neither of my current desktops are exactly "retro", other than generation/age... (not "retro" by my standards)
One is a 3100 Athlon with 2GB RAM, the other a 3.4 GHz Pentium, with 3 GB RAM... (the latter a "discard", as it was "too old" to continue using -- WTF??!!)
However, I have Mini on CD ready to try on my PII 333MHz laptop... (that ought to be "retro" enough...)
I have it on my desktops, and my general observation is that it doesn't seem to bog down the hardware as much as the Lupu 5.28.005 (and that was an improvement over older versions).
The only thing that makes the machine struggle is Firefox (which I think tends to exhibit memory leaks -- and I think the browser always has -- all the way back to the days of NyetScrape -- IIRC, that was the only program that ever crashed my Debian 1.3 install ).
Though neither of my current desktops are exactly "retro", other than generation/age... (not "retro" by my standards)
One is a 3100 Athlon with 2GB RAM, the other a 3.4 GHz Pentium, with 3 GB RAM... (the latter a "discard", as it was "too old" to continue using -- WTF??!!)
However, I have Mini on CD ready to try on my PII 333MHz laptop... (that ought to be "retro" enough...)
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
orinoco_cs pcmcia in 5.2.8.7
Is there a 5.2.8.7 with support for orinoco_cs (the internal orinoco
card in Dell Inspiron 8100)? I had to set up a Toshiba with the same
internal card with Wary 5.5 and Lupu 5.2.5, which still support orinoco
(and also uncomment a line in /etc/init.d/rc.pcmcia) to support noncardbus
pcmcia cards - I think.
The 5.2.8.7 which I downloaded will not detect my card, and manual i
nstall says:Unknown symbol in module, or unknown parameter (see dmesg)
- lots of unknown symbols in dmesg (orinoco_up, hermes-struct_init, etc).92
Wary works on the DELL. I will try 5.2.5.
card in Dell Inspiron 8100)? I had to set up a Toshiba with the same
internal card with Wary 5.5 and Lupu 5.2.5, which still support orinoco
(and also uncomment a line in /etc/init.d/rc.pcmcia) to support noncardbus
pcmcia cards - I think.
The 5.2.8.7 which I downloaded will not detect my card, and manual i
nstall says:Unknown symbol in module, or unknown parameter (see dmesg)
- lots of unknown symbols in dmesg (orinoco_up, hermes-struct_init, etc).92
Wary works on the DELL. I will try 5.2.5.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Yes, before dealing with the wifi driver, you must first ensure that Puppy's PCMCIA sub-system can see your card.
I suggest you go back to 5.2.8.7 and run these 2 commands -
If you cannot see the wifi card listed, reset the Cardbus interface like this -
Now run "pccardctl ident" again.
If still no luck, it may be that pcmciautils is not running, so do this -
and run "pccardctl ident" again.
Let us know if this works.
I suggest you go back to 5.2.8.7 and run these 2 commands -
Code: Select all
pccardctl status
pccardctl ident
Code: Select all
pccardctl eject
pccardctl insert
If still no luck, it may be that pcmciautils is not running, so do this -
Code: Select all
pcmcia-socket-startup
Let us know if this works.
Lupusuper1-5.2.8.7-k3.0.25-20141203.iso works fine on an
Asus K53S icore 7.
Never seen a recovery exercise to factory reset this laptop back
to Win 7 pristine state be so friggin' complicated.
Hours and hours...20 reboots would be an understatement.
My hat's off to Asus for a stupidity exercise beyond my wildest dreams.
Whereas Puppy, with a save file to the hard drive,
booting initially from cd.....wowsome.
rerwin excels again....Chris.
Asus K53S icore 7.
Never seen a recovery exercise to factory reset this laptop back
to Win 7 pristine state be so friggin' complicated.
Hours and hours...20 reboots would be an understatement.
My hat's off to Asus for a stupidity exercise beyond my wildest dreams.
Whereas Puppy, with a save file to the hard drive,
booting initially from cd.....wowsome.
rerwin excels again....Chris.
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Get your copy of CloneZilla and back it up... Then let it update, and back it up again... Never again have to wade through that sort of restore...cthisbear wrote:Lupusuper1-5.2.8.7-k3.0.25-20141203.iso works fine on an
Asus K53S icore 7.
Never seen a recovery exercise to factory reset this laptop back
to Win 7 pristine state be so friggin' complicated.
Hours and hours...20 reboots would be an understatement.
My hat's off to Asus for a stupidity exercise beyond my wildest dreams.
Whereas Puppy, with a save file to the hard drive,
booting initially from cd.....wowsome.
rerwin excels again....Chris.
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
- RetroTechGuy
- Posts: 2947
- Joined: Tue 15 Dec 2009, 17:20
- Location: USA
Report:
An old Compaq Armada (7400), 333 MHz PII. 256 MB RAM runs lupumini. When I flush the cache, it seems to show a memory load of under 60MB. That makes it very comparable to the old 4.11/4.12 Retro (from my recollection).
Even got the sound to work (though the internal speakers are pretty poor -- need to try it through some externals, to see if the driver is correct). It did require that I run ALZA to locate the correct driver (it didn't automagically load).
I didn't try pushing it, and didn't connect it to the internet (the wireless card is out, and have also mislaid my USB card -- the single built in is a USB 1.1)
Well, I really don't use this as more than a test-bed these days, so...
Darn good work guys!
An old Compaq Armada (7400), 333 MHz PII. 256 MB RAM runs lupumini. When I flush the cache, it seems to show a memory load of under 60MB. That makes it very comparable to the old 4.11/4.12 Retro (from my recollection).
Even got the sound to work (though the internal speakers are pretty poor -- need to try it through some externals, to see if the driver is correct). It did require that I run ALZA to locate the correct driver (it didn't automagically load).
I didn't try pushing it, and didn't connect it to the internet (the wireless card is out, and have also mislaid my USB card -- the single built in is a USB 1.1)
Well, I really don't use this as more than a test-bed these days, so...
Darn good work guys!
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]
" Never again have to wade through that sort of restore.."
""""""""
He had not burnt recovery discs.
After all the Asus bs I copied Win7 onto his second partition.
I believe I can just delete his newer Win7, if it stuffs up...
copy it back with Puppy and it will run.
Same hardware....same drive...I do this with XP.
I probably could have use the Falcon or Hiren boot cds
and extracted the hidden Windows Recovery wim files to a drive.
But it was like looking at a snake....Asus mesmerised me.
Chris.
""""""""
He had not burnt recovery discs.
After all the Asus bs I copied Win7 onto his second partition.
I believe I can just delete his newer Win7, if it stuffs up...
copy it back with Puppy and it will run.
Same hardware....same drive...I do this with XP.
I probably could have use the Falcon or Hiren boot cds
and extracted the hidden Windows Recovery wim files to a drive.
But it was like looking at a snake....Asus mesmerised me.
Chris.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Latest Skype to the repo....
Hi Rerwin...
Just installed Mini to my Celeron with 1 gig ram.
I have two small comments...
1) Remove the option of save to partition during first reboot. That one messed up my boot and save to file worked. Could be Ext4?
But in my opinion save to file always works, but others dont.
2) Get the latest skype into the Quickpet and SFS. There are both SFS and .pet of the latest skype here:
http://smokey01.com/OscarTalks/
For new users the forum is a hopeless mess and getting skype right is quite important for many users.
Is it time to make a new official release at distrowatch?
I find your work great and thanks for doing this. Also others that helps out I shall thank for helping old hardware to run as new...
Atle
Just installed Mini to my Celeron with 1 gig ram.
I have two small comments...
1) Remove the option of save to partition during first reboot. That one messed up my boot and save to file worked. Could be Ext4?
But in my opinion save to file always works, but others dont.
2) Get the latest skype into the Quickpet and SFS. There are both SFS and .pet of the latest skype here:
http://smokey01.com/OscarTalks/
For new users the forum is a hopeless mess and getting skype right is quite important for many users.
Is it time to make a new official release at distrowatch?
I find your work great and thanks for doing this. Also others that helps out I shall thank for helping old hardware to run as new...
Atle
Re: Latest Skype to the repo....
It is nice to hear from you again. Rather than removing the option, I prefer to listen to others' experiences with that option and possibly fix it or limit it from ext4 partitions. We need to identify the specific problem. Until then, users can consider themselves warned against using save-to-partition, at least for ext4 partitions.Atle wrote:1) Remove the option of save to partition during first reboot. That one messed up my boot and save to file worked. Could be Ext4?
Thanks for pointing that out. Since lupu does not already contain skype, I am not ready to take on the responsibility for integrating it into lupu. Could users simply add the SFS in bootmanager or with sfs_load? Or is there more to it? Perhaps you would provide a link to the SFS file and the instructions for adding it (or summarize them here), so users can do it themselves. I do not have access to the repo, so cannot add skype.2) Get the latest skype into the Quickpet and SFS. There are both SFS and .pet of the latest skype here:
http://smokey01.com/OscarTalks/
Keep in mind that lupu is not an official puppy release, so cannot be referenced in distrowatch, as I understand. But I would like to see 5.2.8.7 added to the puppylinux.org page that lists the available puppy distros, since it already mentions the original lupu 528-005. I am not sure how to go about doing that.Is it time to make a new official release at distrowatch?
Richard
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
save to partition during first reboot
(I snipped some)
LuPu super 2 is on sda2, an ext3 partition.
EDIT:Sorry, I was not given the option to save to partition during first reboot; don't know what I did wrong.
Sheldon
It's been working fine for me; I'll try it now and edit this post.rerwin wrote:Rather than removing the option, I prefer to listen to others' experiences with that optionAtle wrote:1) Remove the option of save to partition during first reboot. That one messed up my boot and save to file worked. Could be Ext4?
LuPu super 2 is on sda2, an ext3 partition.
EDIT:Sorry, I was not given the option to save to partition during first reboot; don't know what I did wrong.
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Have you tried to use the contact page for puppylinux.org?But I would like to see 5.2.8.7 added to the puppylinux.org page that lists the available puppy distros, since it already mentions the original lupu 528-005. I am not sure how to go about doing that.
http://puppylinuxnews.org/contact
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)