Carolina - 1.3
They didn't work when I tested them, I had to configure them in the options and run the test on each item and they now work.wsamh wrote:How do I get the notification sounds to work on skype?
- Attachments
-
- Screenshot-4.png
- (52 KiB) Downloaded 1046 times
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
You need to navigate to where the sound files are and select them /opt/skype/soundswsamh wrote:where it says "play sound file". next to the sound file, it has a caution sign with "The file is not accessible" while hovering over the caution sign.
Though I'm sure I never had to do this previously
- Attachments
-
- Screenshot.jpg
- (108.11 KiB) Downloaded 1008 times
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
thanks i gradually figured that out it was the ene -lina pet. now let us carolinayerc1 wrote:it's in http://smokey01.com/carolina/elroy/okokoook wrote:just curious, where can we get the ENE usb card driver pet? i did not see such pet in the repo. thanksyerc1 wrote: I requested and elroy was very kind to do a pet for ENE usb card driver in 002. That is now part of 003 kernel (i think) since Carolina recognises when sd card is inserted and mounts it.
cheers
-
- Posts: 1
- Joined: Wed 14 Nov 2012, 04:49
Just to note when i tried the mumble pet in my Saluki 23 I also had no sound from it, nor did it seem to pickup my mic when setting up mumble after install. Even after those to major issues I still connected to a server out of curiosity and the program baulked about codecs mismatching(or non-existent) which could cause no sound sometimes in other situations. It could be nothing but I thought to post it just in case. The actual message was:
I'm trying mumble as a friend suggested it and used it a lot so the codec message might be a common one I wouldn't know.
I love the effort being put into this, but the bigger version is not the best OOTB I've had and didn't expect it to be YET since its a WIP. Hell I didn't try Saluki until version 18. Right now I need stuff to "just work", but I hope to find time to experiment with my favored lighter version. You've done a lot of work on this and Saluki. Thank you.
Updated November 23:
I finally managed to get Carolina working with my desktop by setting "nomodeset" at Carolina boot time. Seems to work just as great as Saluki for me. I've yet to tackle installing the Nvidia drivers so I can have dual screens back but it should be as easy as it is in Saluki I hope. Thanks again.
Code: Select all
[05:32:07] Welcome to Mumble.
[05:34:15] Connecting to server mumble.axxim.net.
[05:34:22] Connected.
[05:34:22] Unable to find matching CELT codecs with other clients. You will not be able to talk to all users.
[05:34:22] Welcome message:
Welcome to our new Mumble server!
Enjoy your stay.
I usually use the same Saluki thumb drive with both my PC & laptop. I have tried Carolina 3, but it will not boot past the 5 second startup screen on the same Amd dual-core based PC with Nvidia 550TI that boots Saluki 23 just fine off a usb flash drive or internal hard drive. It does boot up and seem to work ok on my HP G50 laptop running dual-core Pentium and Intel graphics. One of 2 only "weird" issues that might(?) be input/touch pad related(?) I had a few times was when installing pets from the package manager I click on the pet I want to install from the list and click on the popup dialogs that follow. Once I click to close the last confirmation dialog after the pet is installed the "Do you want to install" message pops up like I just clicked to install the same pet again, but didn't. I could click the [x] or cancel to close it but the dialog just came right back over and over again. At the same time if I moved my mouse cursor over any part of the title bar of the package manager window itself the cursor would turn into the horizontal resize cursor <-> which isn't normal behavior. I had to eventually force close the package manager to make it stop.elroy wrote:..If you're not getting sound, I guess it's back to the drawing board. Making mumble is a bugger 'n a half. Thanks for the update.
I love the effort being put into this, but the bigger version is not the best OOTB I've had and didn't expect it to be YET since its a WIP. Hell I didn't try Saluki until version 18. Right now I need stuff to "just work", but I hope to find time to experiment with my favored lighter version. You've done a lot of work on this and Saluki. Thank you.
Updated November 23:
I finally managed to get Carolina working with my desktop by setting "nomodeset" at Carolina boot time. Seems to work just as great as Saluki for me. I've yet to tackle installing the Nvidia drivers so I can have dual screens back but it should be as easy as it is in Saluki I hope. Thanks again.
Last edited by Retro Gamer on Fri 23 Nov 2012, 06:11, edited 1 time in total.
Re: Carolina
i have problems trying to run any puppy linux on a macbook pro.Billtoo wrote:It's an approx 4 year old aluminum imac.einar wrote: Does your iMac have EFI bios ?
It uses the EFI bios.
How did you get to test / install Carolina ? USB or CD ? The macbook pros CD/DVD rom is defective and i need to use usb flash. and for that to work i needs a folder and som files named EFI on the flash drive. I managed to install ubuntu once. but lost the flash drive and i cant find the how to. And anyways i will mutch rather install Carolina than Ubuntu.
Re: Carolina
I used rEFIt to run Carolina on a MacBook. I hopes this helps with your problem.einar wrote:How did you get to test / install Carolina ? USB or CD ? The macbook pros CD/DVD rom is defective and i need to use usb flash. and for that to work i needs a folder and som files named EFI on the flash drive. I managed to install ubuntu once. but lost the flash drive and i cant find the how to. And anyways i will mutch rather install Carolina than Ubuntu.
Re: Carolina
Ive got reeit installed, and now i am confused. I get it up, but how can i boot a linux disto on it. could you pm me ? ive tink im on to somthing useing elilo but im very green on this subjekt.linux wrote:I used rEFIt to run Carolina on a MacBook. I hopes this helps with your problem.einar wrote:How did you get to test / install Carolina ? USB or CD ? The macbook pros CD/DVD rom is defective and i need to use usb flash. and for that to work i needs a folder and som files named EFI on the flash drive. I managed to install ubuntu once. but lost the flash drive and i cant find the how to. And anyways i will mutch rather install Carolina than Ubuntu.
thanks
Einar
Carolina
Carolina, version 003 on Thu 15 Nov 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation Device 1082 (rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg
Driver used: nvidia: vendor=NVIDIA Corporation
X.Org version: 1.11.0
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce GTX 560 Ti/PCIe/SSE2
Version 4.2.0 NVIDIA 304.64
Direct Rendering Yes
I installed carolina 03 on a desktop pc, installed the proprietary
nvidia driver, and connected a second monitor to it.
Each can have it's own panel,wallpaper,and items on the panel.
It's working well.
Chip description:
0.0 VGA compatible controller
nVidia Corporation Device 1082 (rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg
Driver used: nvidia: vendor=NVIDIA Corporation
X.Org version: 1.11.0
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
dimensions: 1440x900 pixels (411x263 millimeters)
depth of root window: 24 planes
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce GTX 560 Ti/PCIe/SSE2
Version 4.2.0 NVIDIA 304.64
Direct Rendering Yes
I installed carolina 03 on a desktop pc, installed the proprietary
nvidia driver, and connected a second monitor to it.
Each can have it's own panel,wallpaper,and items on the panel.
It's working well.
- Attachments
-
- 2monitors.JPG
- (79.95 KiB) Downloaded 1517 times
Re: Carolina
That's too cool, Billtoo.Billtoo wrote:I installed carolina 03 on a desktop pc, installed the proprietary
nvidia driver, and connected a second monitor to it.
Each can have it's own panel,wallpaper,and items on the panel.
It's working well.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
python: import gtk error
Hi,
got a try using the python2.7.2-i486.pet from Carolina pets repo on dpup exprimo 3.6.2:
even wxPython is running fine.
Got this
thanks for any reply
Charlie
got a try using the python2.7.2-i486.pet from Carolina pets repo on dpup exprimo 3.6.2:
even wxPython is running fine.
Got this
how to fix the import gtk error ? any idea?# python
Python 2.7.2 (default, Feb 12 2012, 18:36:30)
[GCC 4.3.4] on linux3
Type "help", "copyright", "credits" or "license" for more information.
>>> import cairo
>>> import glib
>>> import gtk
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py", line 40, in <module>
from gtk import _gtk
ImportError: /usr/lib/python2.7/site-packages/gtk-2.0/gtk/_gtk.so: undefined symbol: gtk_combo_box_set_entry_text_column
>>>
thanks for any reply
Charlie
Re: Carolina
It might be worth trying a program called rufus (Windows) to transfer your Carolina iso to USB stick. It works well and fast. Then when you boot the Mac with rEFIt Carolina will boot from the Penguin (Linux) Icon.einar wrote:Ive got reeit installed, and now i am confused. I get it up, but how can i boot a linux disto on it. could you pm me ? ive tink im on to somthing useing elilo but im very green on this subjekt.linux wrote:I used rEFIt to run Carolina on a MacBook. I hopes this helps with your problem.einar wrote:How did you get to test / install Carolina ? USB or CD ? The macbook pros CD/DVD rom is defective and i need to use usb flash. and for that to work i needs a folder and som files named EFI on the flash drive. I managed to install ubuntu once. but lost the flash drive and i cant find the how to. And anyways i will mutch rather install Carolina than Ubuntu.
thanks
Einar
I know nothing about Macs & and I am only just getting into Linux but this method works fine every time on my brothers MacBookPro.
I hope this helps
Thanks
Just saw carolina project yesterday. Today I tried it. Wow all the things i try to get toe work in puppy are there already except inkscape and gimp. I was amazed to see a gui for grub4dos. (That may be my newbie level of knowledge) I started using puppy about 4 months ago using manna puppy. Been waiting to see the precise version so I can try to input Thai and KOREAN LANGUAGES. Sorry my 6 yr old wants daddy. But I am very impressed and pleased - now lets see if I can get asian languages supported.
Will any precise pet work as wel? do precise built pets only work with percise puppy? I figured out slacko does not or I am doing somethign wrong.
ok MY LITTLE ONE CANT WAIT
wONT TRADE IN BEING A DADDY jUST ONCE IN A WHILE WANT TO ESCAPE.
Sorry about capitls no time to fix
Loyal
Will any precise pet work as wel? do precise built pets only work with percise puppy? I figured out slacko does not or I am doing somethign wrong.
ok MY LITTLE ONE CANT WAIT
wONT TRADE IN BEING A DADDY jUST ONCE IN A WHILE WANT TO ESCAPE.
Sorry about capitls no time to fix
Loyal
Re: Thanks
There is inkscape-0.48.0-w5, inkscapelite-0.36.3-w5 and gimp-2.7.1-w5 in the PPM, just type them in the search bar of the PPM and click Find Pets, gimp-2.7.1-1-w5.sfs is in the sfs downloads.loyal wrote:Just saw carolina project yesterday. Today I tried it. Wow all the things i try to get toe work in puppy are there already except inkscape and gimp. I was amazed to see a gui for grub4dos. (That may be my newbie level of knowledge) I started using puppy about 4 months ago using manna puppy. Been waiting to see the precise version so I can try to input Thai and KOREAN LANGUAGES. Sorry my 6 yr old wants daddy. But I am very impressed and pleased - now lets see if I can get asian languages supported.
Will any precise pet work as wel? do precise built pets only work with percise puppy? I figured out slacko does not or I am doing somethign wrong.
ok MY LITTLE ONE CANT WAIT
wONT TRADE IN BEING A DADDY jUST ONCE IN A WHILE WANT TO ESCAPE.
Sorry about capitls no time to fix
Loyal
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
Re: python: import gtk error
Out of curiosity I tried python2.7.2-i486.pet, numpy-1.6.1.pet and mypaint-1.0.0.pet in gray's Precise NOP 5.4.1, it worked.charlie6 wrote:Hi,
got a try using the python2.7.2-i486.pet from Carolina pets repo on dpup exprimo 3.6.2:
even wxPython is running fine.
Got thishow to fix the import gtk error ? any idea?# python
Python 2.7.2 (default, Feb 12 2012, 18:36:30)
[GCC 4.3.4] on linux3
Type "help", "copyright", "credits" or "license" for more information.
>>> import cairo
>>> import glib
>>> import gtk
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py", line 40, in <module>
from gtk import _gtk
ImportError: /usr/lib/python2.7/site-packages/gtk-2.0/gtk/_gtk.so: undefined symbol: gtk_combo_box_set_entry_text_column
>>>
thanks for any reply
Charlie
It's not really a good idea to mix these packages, what works for one may break another.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Downloaded 002 and 003 delta files, upgraded 001 to 002 then 002 to 003. Md5 checks out, ready to go!
No issues so far except the same problem as Linalite, no thumbnails. Hope you can sort this out for 004.
Nice job though, thanks!
No issues so far except the same problem as Linalite, no thumbnails. Hope you can sort this out for 004.
Nice job though, thanks!
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]