Page 20 of 30
Posted: Mon 07 Mar 2016, 13:39
by peebee
stemsee wrote:@Peebee
Did you boot without savefile? Do you try pfix=nox ? And then run xorgwizard ?
To get the nvidia proprietary graphics drivers working you will need to install the kernel sources and then run the nvidia installer from outside of X on cli. It needs to compile the module/driver for the new kernel ... it cannot work otherwise (as far as I know (which isn't too far!)).
Nvidia driver installer package select here:
http://www.nvidia.co.uk/Download/Find.aspx?lang=en-uk
Yes - no savefile
Yes - tried to run xorgwizard - crashed
I don't need the proprietary driver - usually nouveau works just fine - I was only quoting the 304.131 driver to show that my nvidia card is considered "legacy"....in fact the 304.131 proprietary driver won't load properly for kernels > k4.3 without a patch....
My problem is that nouveau does not work in your new k4.4.4 whereas it worked just fine in k4.4.1....and all your previous kernels
Posted: Wed 09 Mar 2016, 01:40
by jlst
The latest kernel seems to lack some essential drivers
FATAL: Module snd_via82xx not found.
# find /lib/modules/$(uname -r) -name snd* | grep via
/lib/modules/4.4.4-EmSee-32-pae-rt9/kernel/sound/pci/hda/snd-hda-codec-via.ko
I tried to use vmlinuz-4.4.4-EmSeei686 with the modules from linux-4.4.4-1-i686.pkg.tar.xz
It booted to desktop, but I guess there is a conflict, no modules were loaded.
I wonder what would happen if you compile a kernel with this label/version 4.4.4-1-ARCH in vmlinuz
Posted: Thu 10 Mar 2016, 22:15
by stemsee
Try and see! The tools have already been provided.
Posted: Mon 21 Mar 2016, 22:32
by stemsee
kernel-4.4.6-pae-rt11 @ 7MB kernel-modules.sfs @ 7MB
Posted: Mon 21 Mar 2016, 23:23
by musher0
Hello stemsee.
I haven't read all the 26 pages of posts, sorry, but have you built
one of the LTS kernels?
https://www.kernel.org/, starting
at 3rd entry.
Also, are your kernels intended for your own pups only or can they
be used generally. on other pups?
I know you say so in your script. I ask because I just tried to update
dejan's dpup-4.87's kernel and I seemed to have failed.
Your script gave me
cp "cannot stat" messages.
The kernel for the dpup-4.87 is at
/mnt/home/dpup-4.87/lance.
Your script made the back-up but didn't copy the new kernel.
Thanks in advance for any pointers.
Best regards.
Posted: Tue 22 Mar 2016, 07:48
by stemsee
I assume that you are talking about the newkern kernel installer script!
huge-*.tar.bz2 kernel package must be in ~/Downloads/* (as stated) but you can alter the script as you like maybe use a find command to locate the huge kernel package.
Posted: Tue 22 Mar 2016, 08:57
by musher0
Thanks, stemsee.
Your script
here. It doesn't have a title.
The download part of your script is fine. It downloads all right, but it can't find where
I put my kernel and initrd.
Yours and 01micko's similar script assume a flat directory, whereas I'm following the
ancient practice of putting the kernel and initrd in a sub-folder below the 2nd level
folder where the puppy sfs, zdrv and devx reside. Some may think it is stupid to do
it that way, but I was not born yesterday, and I find it clearer for the mind to have
each category of things in its own place. And it's just as efficient boot-wise.
But don't bother. I managed to do it by hand guided by someone else.
Besides -- sorry for the ruffled feathers -- IMO, these types of scripts are usually
useless except as instructors. Understand what these scripts do and you don't need
them: then you know how to do it by hand instead, and usually faster.
Get a brush for those feathers I ruffled!
BFN.
Posted: Sat 26 Mar 2016, 21:00
by DR.TUX
This is my first post:
Using stemsee's "2016 SUKK i've compiled 64 bit 4.4.6 quirky/puppy linux kernel with x32abi support
kernel is compiled for and tested in Bary Kauler's 'prototype" aprilneo-7.1.93 x32abi system (everything seems works fine)
in others 64 bit puppies xorgwizard doesn't work
Here is link to 4.4.6-x86_64_x32abi kernel package and sources:
https://drive.google.com/folderview?id= ... sp=sharing
Posted: Sun 27 Mar 2016, 08:00
by stemsee
Thanks DR.TUX
I am downloading the pet and sources packages, however I cannot find the huge-4.4.6-*.tar.bz2 package?
stemsee
Posted: Sun 27 Mar 2016, 21:20
by DR.TUX
Sorry huge package is and is not uploaded to my google drive (WTF???-I have enough free space!)- i will try to fix it (i am an amateur)
Posted: Sun 27 Mar 2016, 21:32
by DR.TUX
already fixed!
huge-4.4.6-x32-abix86_64.tar.bz2 is in folder, and it downloads
-stupid mistake
Gee! My first time
Posted: Mon 28 Mar 2016, 14:56
by peebee
DR.TUX wrote:already fixed!
huge-4.4.6-x32-abix86_64.tar.bz2 is in folder
Seems to work ok when used in LxPupSc 32-bit build....
Only oddity was
PAUSING PAUSING PAUSING after "Searching for Puppy files" during bootup.
Identifies as x86_64 see screenie.
Posted: Mon 28 Mar 2016, 21:20
by DR.TUX
peebee wrote:
Only oddity was PAUSING PAUSING PAUSING after "Searching for Puppy files" during bootup.
I couldn't replicate this behavior of Lxpup.
System is searching puppy files in ydrive without any problems ( kernel replacing method used by stemsee described above) -I've just renamed vmlinuz-4.4.6-x32-abix86_64 to vmlinuz , kernel-modules.sfs-4.4.6-x32-abix86_64 to ydrv_lxpup_15.11.sfs , then I've putted it to boot drive (usbflash). Everything works fine in lxpup in live session except xorgwizard as I've written in my first post.
Posted: Mon 28 Mar 2016, 21:58
by DR.TUX
P.S. As Barry has written - to use advantages of both 32 and 64 bit "worlds" with x32 ABI kernel ( achieve greater performance like x86_64 , with smaller memory footprint, and smaller system as i386), you should recompile everything in your system with configure -mx32 option
https://sites.google.com/site/x32abi/
Posted: Mon 04 Apr 2016, 07:25
by stemsee
@DR TUX
Could you post your config file for your kernel build please!?
Posted: Mon 04 Apr 2016, 09:40
by stemsee
I can't get past this message when compiling, using a variety of DOTconfig files.. Anyone else seen a similar problem?
Posted: Mon 04 Apr 2016, 16:30
by stemsee
I figured it out by compiling with 'make' that is a single thread and the problem was openssl-1.0.1 not found on my system....~! Sorted now running nicely again.
Posted: Mon 18 Apr 2016, 12:42
by stemsee
kernels 4.5.1-EmSee pae(i686) nopae(i486 300mhz nosmp) x64 all in one dir on gdrive.
https://drive.google.com/folderview?id= ... UNXdDYyZEk
Seeking enlightenment......
Posted: Sat 07 May 2016, 10:00
by peebee
I've just compared the DOTconfig files for 4.5.2-lxpup (based on 4.2.5-stemsee) and the 4.5.2 666philb has provided in xenialpup-7.0.1
There are many differences - but both kernels seem to work OK in puppy.....
Which is best? Should I worry?
Both files with false .gz are attached.
Thanks for any enlightenment....
peebee
Posted: Sat 07 May 2016, 14:53
by Sailor Enceladus
Excellent. I'm in a much better mood when I have coffee in the morning