(old)Puppy Linux Discussion Forum

hi shinobar,

Tests ( two PC)
PC I : AMD2 , Asus M2V, DDR2 1 G, (without Nvidia Driver for GeForce 7600)

TEST I PC I: (Live Cd, Frugal install)
bug n°1 CD >... > "X failed to start xorgwizard"
--- a) I did not use xorgwizard but typed "xwin" (querty) > OK the displayed screen is OK
--- b) Country Settings : fr français > Europe-Paris > UTC > fr 'France) > X server :
=> Menu (fr) : OK
=> Icons : us
--- lang_pack-fr => Icons : OK (fr)
bug n°2 UTC is not good, bad time.
................
Pupsave > reboot
bug n°3 : "X failed to start..." => I typed "xwin" in... AZERTY : OK

-----------------------------------------------

TEST II PC I: Full Install (multi boot): All is OK
Without the bugs of the frugal install.
===============================

TEST III PC II : (AMD Athlon, 514 MB, resolution 1024 X 768) :
Frugal install ... pupsave ... reboot...
All is OK, without bugs


Thanks for your work.

Taskbar will not go to top. Says config corrupt.
003 works but 004 doesn't.
I have the same issue with lupu 508 +510. 508 will go to top but 510 gives error message -config corrupt.

charlie6 wrote:mtpaint version was 3.34.40 in lupq-003
Is there any problem that led to return back to mtpaint version 3.31 ?
(I noticed it worked nice in lupq-003 even after setup locale to french)
Any possibility to upgrade to 3.34.40 in next lupq?

lupq-001-004 has mtpaint version 3.31, same as lupu-510.
The lang_support-all-1.5 has version 3.34.40, comes from 431JP.

Do you like mtpaint version 3.34.40 on lupq-005?

maxpro4u wrote:Taskbar will not go to top. Says config corrupt.

I am not sure it depends or not on the version of lupq and/or lupu.
anyway, edit /etc/xdg/templates/_root_.jwmrc.
Comment out or delete two '<corner>...' at line 83 and 89. Then, menu > Shutdown > Refresh desktop
And re-run JWM configuration.

Hi shinobar,
Got a try on misc_fonts.tar.gz

shinobar wrote: ...Extract the attached and find '/usr/share/fonts/misc'. Place the whole directory 'misc' at the corresponding place.

So I got:

After that, you may have to run on the virtual terminal:

Code: Select all

fc-chace

Here I ran instead (thought it is -cache in place of -chace)

You can see them by 'Gfontsel' at the Desktop Applets on the menu.

Indeed there it is!

But...
I got exactly the same message as on top of this page thanks in advance for your time
Cheers, Charlie

Hi again,

shinobar wrote:...Do you like mtpaint version 3.34.40 on lupq-005?

Hmmm...For sure I like it ! (thanks Dmitry !) I'm using it quite daily !
Thanks again!
Cheers, Charlie

shinobar wrote:

maxpro4u wrote:Taskbar will not go to top. Says config corrupt.

I am not sure it depends or not on the version of lupq and/or lupu.
anyway, edit /etc/xdg/templates/_root_.jwmrc.
Comment out or delete two '<corner>...' at line 83 and 89.

Code: Select all

<!-- <Corner>white</Corner> -->
<Outline>black</Outline>
</Active>
<Inactive>
<Text>#aaaaaa</Text>
<Title>#fffa71:#ffda51</Title>
<!-- <Corner>#aaaaaa</Corner> -->

Then, menu > Shutdown > Refresh desktop
And re-run JWM configuration.

Deleted lines-refresh-re-run-still says config corrupt

I will check config file from 003 and see what is different.

maxpro4u wrote:Deleted lines-refresh-re-run-still says config corrupt

Does the JWM Configuration Manager leaves /tmp/checklist.temp.*?

Or, restart X, and check out the file '/tmp/xerrs.log'.

Or, on the virtual terminal, type:

shinobar wrote:

maxpro4u wrote:Deleted lines-refresh-re-run-still says config corrupt

Does the JWM Configuration Manager leaves /tmp/checklist.temp.*?

Or, restart X, and check out the file '/tmp/xerrs.log'.

Or, on the virtual terminal, type:

Code: Select all

jwm -p

here is log file

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux puppypc 2.6.33.2 #1 SMP Thu May 27 10:56:32 EST 2010 i686
Kernel command line: PMEDIA=idehd PDEV1=sda5 psubdir=lupq004 pnpbios=off
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@ubuntu.com>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 19 13:50:27 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
(EE) GLX: could not load software renderer
cat: /sys/block/fd0/device/vendor: No such file or directory
cat: /sys/block/fd0/device/model: No such file or directory
/usr/bin/jwm
JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
killall: freememapplet: no process killed
ACPI seems to be supported but not enabled in kernel,
try using acpi=force on next reboot.
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Replacing "NEXTWM="$1"" with "NEXTWM="$1"" (case sensitive) (partial words matched)
Processing: /usr/bin/restartwm

A Total of 1 matches replaced in 1 file searched.
Line: 5 String Found and Replaced
ACPI seems to be supported but not enabled in kernel,
try using acpi=force on next reboot.
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JEXIT="ok"
Generating /root/.icewm/menu...
Generating /root/.jwmrc...
JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
killall: freememapplet: no process killed
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JJWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JEXIT="ok"

Updated to lupq-005. Major bugfix: was lost timezone after rebooting PC.

charlie6 wrote:using Abiword, bold characters are not bold displayed.

Lupq cuts down Dejavu fonts and has only one file, regular sans.
Bold and italic can be displayed on most applications but abiword.
On abiword, Sans bold ok, but Serif bold no.
Abiword can show next patterns of font styles.

Adding font files enables serif bold on abiword. But should we make the main sfs fat only for abiword?. Can it be an additional pet?
Gnumeric can show serif bold with the diet font set on lupq. OpenOffice has no problem because it has its own fonts in the package.
How do you think?

maxpro4u wrote:JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner

Try another jwm theme.

Anyway, the jwmconfig2 is buggy. I can import the improved code from Puppy-431JP(Japanese edition), maybe on next lupq release.

TEST lupq 005 :

'azerty' and fr_FR (France), (without Nvidia driver GeForce 7600 GT ),AMD AM2

005.iso is good but the live-CD 005 has updated my lupq004 (Full Install) right, directly
and after I get the prompt .
I typed 'xwin' (querty) ... and I get the good screen with 'azerty', Locale (fr_FR) etc...
TimeZone is right.
----------------------------------------------

--- Iron Browser is good, light and displays (with SRWare Iron) an automatic traduction. Very interesting.
--- And Flash (libflashplayer-10.1.82.76 pet ) is running very well with Iron browser

Cheers,

Hi shinobar,

shinobar wrote:...should we make the main sfs fat only for abiword?. Can it be an additional pet?
...How do you think?

oops! Sorry to not have tried other fonts than Times New roman...!
I agree with you. Better keep sfs tiny.

Thanks having put mtpaint-3.34.40 inside the iso !
Cheers, Charlie

double post ...sorry

charlie6 wrote:on lupq-003, got this error while opening a .ps file which is readable in pup420.
This the error code I got.
I think it could be a problem of missing installed font, does'nt it?

As you know the font set on lupq is dieted.
But intalling the Type1 fonts from that of luci-510 may avoid the problem.
Here is Type1 fonts extracted from quirky-120 and the same as lupu-510.
Will you try it?

It also allows abiword bold serif and roman.
Containing these fonts will enlarge the .iso file 1MB or so...

Hi Shinobar,

Thanks for lupq-005. It is a better choice for me than lupu 5.1

I have added some patches, which I think will make lupq-005 even better.

• freememapplet_tray-2.2-q1.pet
  network_tray_ecube-2.4.1.pet
  Partview-2.1.pet
  .jwmrc-tray

Try them.

Keep up the good work

Olov.
~

ecube wrote:

• freememapplet_tray-2.2-q1.pet
  network_tray_ecube-2.4.1.pet
  Partview-2.1.pet
  .jwmrc-tray

Your partview is much better than Barry's, i think.

Another ones may be of the recent woof, exept network-tray-ecube is a slight different, right?
Next Lucid Puppy 5.1.1 or luci-217, playdays going to follow them, but I have some discussion on the new network-tray and freemem.

As for the jwmconfig2, we have better code on Puppy-431JP(Japanese edition), and i can import it.

Anyway thanks for your contribution.

I personally do not like Bary's new network tray.

1. The icon is not familiar. The old icon is common, same as the gtk icon and Windows.
2. Too many information on the splash. The old one is simple, more information available with right click.

How do you think?

Anyway the new trays are now in the recent woof, and becomes the new standard of Puppy and puplets...

i agree with you about the free memory applet. the old one was better.

you seem to have an independent idea of where you want things to go, have you considered taking over one of the other distribution pups that are not currently being developed. such as dpup which has a great start but gposil has unfortunately not been back for a while. or spup that barry started, etc? just wondering.