Legacy OS 4 Mini Released
Did a manual full install to a Compaq Armada M700:
-Computer-
Processor : Pentium III (Coppermine)
Frequency : 447.81MHz
Memory : 385MB (67MB used)
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ES1978 - ESS ES1978 (Maestro 2E)
-Input Devices-
TPPS/2 IBM TrackPoint
AT Translated Set 2 keyboard
PC Speaker
HID 413c:3010
-SCSI Disks-
ATA TOSHIBA MK4032GA
COMPAQ CD-224E
ATA CF CARD 4GB
Just dumped the contents of the sfs and vmlinuz to a partition (ext2) and took it from there.
Runs quite well. Apps can be slow to load but are ok once running. Using wireless (via ndiswrapper and the old network wizard). Couldn't get WPA connection at first, but ran Auto DHCP and it connected anyway.
Not using included browsers, as I use Opera-Next which runs quite happily in its own directory and is shared between other Puplets.
No problems so far, looking good.
-Computer-
Processor : Pentium III (Coppermine)
Frequency : 447.81MHz
Memory : 385MB (67MB used)
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ES1978 - ESS ES1978 (Maestro 2E)
-Input Devices-
TPPS/2 IBM TrackPoint
AT Translated Set 2 keyboard
PC Speaker
HID 413c:3010
-SCSI Disks-
ATA TOSHIBA MK4032GA
COMPAQ CD-224E
ATA CF CARD 4GB
Just dumped the contents of the sfs and vmlinuz to a partition (ext2) and took it from there.
Runs quite well. Apps can be slow to load but are ok once running. Using wireless (via ndiswrapper and the old network wizard). Couldn't get WPA connection at first, but ran Auto DHCP and it connected anyway.
Not using included browsers, as I use Opera-Next which runs quite happily in its own directory and is shared between other Puplets.
No problems so far, looking good.
Tried on my trusty old primary P3 test box. 733 Mhz/256 Mb ram/ 1 Gb swap.Boot parameters or not ....kernel panic.Tried a manual frugal install.... kernel panic as soon as the sfs tried to load into ram.
I also did a manual full install and things are working well.Runs pretty darn quick.
-Computer-
Processor : Pentium III (Coppermine)
Memory : 254MB (127MB used)
Operating System : Puppy Linux 0.42
User Name : root (root)
Date/Time : Sat 24 Mar 2012 06:06:51 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Version-
Kernel : Linux 2.6.25.16 (i686)
Compiled : #1 Tue Aug 26 10:45:53 GMT-8 2008
C Library : GNU C Library version 2.6.1 (stable)
Default C Compiler : Unknown
Distribution : Puppy Linux 0.42
-Processor-
Name : Pentium III (Coppermine)
Family, model, stepping : 6, 8, 6 (Pentium III/Pentium III Xeon/Celeron)
Vendor : Intel
-Configuration-
Cache Size : 256kb
Frequency : 730.90MHz
BogoMIPS : 1462.98
Byte Order : Little Endian
# free
total used free shared buffers
Mem: 254760 242640 12120 0 11264
Swap: 1020088 0 1020088
Total: 1274848 242640 1032208
#
I also did a manual full install and things are working well.Runs pretty darn quick.
-Computer-
Processor : Pentium III (Coppermine)
Memory : 254MB (127MB used)
Operating System : Puppy Linux 0.42
User Name : root (root)
Date/Time : Sat 24 Mar 2012 06:06:51 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Version-
Kernel : Linux 2.6.25.16 (i686)
Compiled : #1 Tue Aug 26 10:45:53 GMT-8 2008
C Library : GNU C Library version 2.6.1 (stable)
Default C Compiler : Unknown
Distribution : Puppy Linux 0.42
-Processor-
Name : Pentium III (Coppermine)
Family, model, stepping : 6, 8, 6 (Pentium III/Pentium III Xeon/Celeron)
Vendor : Intel
-Configuration-
Cache Size : 256kb
Frequency : 730.90MHz
BogoMIPS : 1462.98
Byte Order : Little Endian
# free
total used free shared buffers
Mem: 254760 242640 12120 0 11264
Swap: 1020088 0 1020088
Total: 1274848 242640 1032208
#
- Attachments
-
- legacy os4.png
- (31.91 KiB) Downloaded 2125 times
- john biles
- Posts: 1458
- Joined: Sun 17 Sep 2006, 14:05
- Location: Australia
- Contact:
Hello Keef and James C,
If possible can you post a quick "How To" on using the sfs file from the CD to boot those computers having trouble with the "Kernel Panic Error" on systems with less than 512Mb's of Ram.
Also try removing Ram so you only have 128Mb's, I've been told this might also work.
If possible can you post a quick "How To" on using the sfs file from the CD to boot those computers having trouble with the "Kernel Panic Error" on systems with less than 512Mb's of Ram.
Also try removing Ram so you only have 128Mb's, I've been told this might also work.
Legacy OS 2017 has been released.
John,
Very nice and well polished.
I had trouble with audio and smplayer would not work for me. A video mkv, mp4 was very chopped up, so pixilated I got very little display.
I still need to do more testing but what I have seen so far looks very good.
Xorg wouldn't run and I had to use Xvesa I think it was.
Running on an Intel Q9400 with 4G ram and Nvidia 220 graphics card.
Cheers
Very nice and well polished.
I had trouble with audio and smplayer would not work for me. A video mkv, mp4 was very chopped up, so pixilated I got very little display.
I still need to do more testing but what I have seen so far looks very good.
Xorg wouldn't run and I had to use Xvesa I think it was.
Running on an Intel Q9400 with 4G ram and Nvidia 220 graphics card.
Cheers
I just happened to have another old box handy ....500 Mhz w/ 128 Mb ram. I deleted the swap partition just for this test.john biles wrote: Also try removing Ram so you only have 128Mb's, I've been told this might also work.
Legacy OS 4 Mini booted to a desktop, was able to take a screenshot (see below) but that was about it.Can't really get anything else to launch however that may be more the fault of the slow cpu.Did boot though.
Well,after about 5 minutes Opera is finally launching.
- Attachments
-
- 128 mb ram.png
- (30.53 KiB) Downloaded 1912 times
Added some swap..... running live again. Slow but posting from it now.Appears to be too much for this poor little cpu.
-Computer-
Processor : Celeron (Mendocino)
Memory : 124MB (61MB used)
Operating System : Puppy Linux 0.42
User Name : root (root)
Date/Time : Sat 24 Mar 2012 09:53:38 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Processor-
Name : Celeron (Mendocino)
Family, model, stepping : 6, 6, 5 (Pentium II/Pentium II Xeon/Celeron)
Vendor : Intel
-Configuration-
Cache Size : 128kb
Frequency : 498.35MHz
BogoMIPS : 997.73
Byte Order : Little Endian
# free
total used free shared buffers
Mem: 124816 122116 2700 0 1424
Swap: 1004536 73808 930728
Total: 1129352 195924 933428
#
-Computer-
Processor : Celeron (Mendocino)
Memory : 124MB (61MB used)
Operating System : Puppy Linux 0.42
User Name : root (root)
Date/Time : Sat 24 Mar 2012 09:53:38 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Processor-
Name : Celeron (Mendocino)
Family, model, stepping : 6, 6, 5 (Pentium II/Pentium II Xeon/Celeron)
Vendor : Intel
-Configuration-
Cache Size : 128kb
Frequency : 498.35MHz
BogoMIPS : 997.73
Byte Order : Little Endian
# free
total used free shared buffers
Mem: 124816 122116 2700 0 1424
Swap: 1004536 73808 930728
Total: 1129352 195924 933428
#
- Attachments
-
- with swap.png
- (36.77 KiB) Downloaded 1971 times
Indeed it does. This is utterly bizarre - something is very wrong! Moreover, the initial booting is much faster, almost instantaneous, even than with 2Gb on a 939 machine. How can this be? Furthermore, got an Xorg screen up at 1024x768 immediately, even with an old S3 PCI card. Notwithstanding, once the opening screen appears, only then is there more CD accessing to complete the loading process. It seems rather out of sequence? Predictably, the CD tray would not open manually, suggesting that BK s CD retention on lo mem had kicked in. After leaving for a few minutes, the Karamba KDE crash message popped up; this is reproducible. It can be deleted. Clearly, at low res. and mem shortage, a bunch of desktop icons were either missing or scrambled and that nice, helpful iconised menu list on the lhs wasn't present.Also try removing Ram so you only have 128Mb's, I've been told this might also work.
Over to you, John!
Later: It also works on 192Mb, but slightly slower. Even more amazing, the initial boot-up is fastest with only 64Mb, yes, 64Mb; of course, with such low resources, winding up Xorg takes a little looonnngggeeerrrr. VESA is tolerable - dig out an old 14" crt and run at 640x480, perhaps?!
Later still: by interpolation and judicious twiddling of BIOS caching options, 92Mb with VESA 800x600x16, using an led/lcd monitor, seems optimal(?!) to install to HD, then revert to more reasonable configuration afterwards.
Should be enough pointers from these observations for the gurus to crawl over the code and give an answer?
The lower ram/faster boot phenomenon is probably because it's quicker to read off the cd instead of loading the 473 Mb sfs into ram.Sounds like a plausible reason anyway.
If someone more familiar with the startup scripts could raise the minimum parameters to load the sfs into ram it would probably take care of the problem.
I think that if Puppy detects 256 Mb of ram it automatically loads the sfs into ram..... which doesn't work too well when the sfs is larger than the available ram.
If someone more familiar with the startup scripts could raise the minimum parameters to load the sfs into ram it would probably take care of the problem.
I think that if Puppy detects 256 Mb of ram it automatically loads the sfs into ram..... which doesn't work too well when the sfs is larger than the available ram.
DIY full install
DIY Full install:
Mount the ISO (just clicking on it will do)
Click on pup_421.sfs ... but ...
If you are using a 4 series based pup (4.00 to 4.21 or retro 4.3, 4.31) you will be able to mount the sfs as they can read the same squashfile version (3.1).
If you are using a newer pup, you may get a dialogue box suggesting converting it to a compatible version. Do this, as you are extracting the contents anyway and won't need the sfs once you've had your evil way with it.
Once you see the contents of the sfs, copy everything to a partition with enough space - roughly 3 gig I think.
Also copy vmlinuz from the ISO to the same partition - you don't need initrd.gz.
I use Grub4Dos to boot, and the menu.lst entry I have is:
Hope this helps.
Mount the ISO (just clicking on it will do)
Click on pup_421.sfs ... but ...
If you are using a 4 series based pup (4.00 to 4.21 or retro 4.3, 4.31) you will be able to mount the sfs as they can read the same squashfile version (3.1).
If you are using a newer pup, you may get a dialogue box suggesting converting it to a compatible version. Do this, as you are extracting the contents anyway and won't need the sfs once you've had your evil way with it.
Once you see the contents of the sfs, copy everything to a partition with enough space - roughly 3 gig I think.
Also copy vmlinuz from the ISO to the same partition - you don't need initrd.gz.
I use Grub4Dos to boot, and the menu.lst entry I have is:
Code: Select all
title Legacy 04
root (hd0,0)
kernel /vmlinuz root=/dev/sda1
Re: DIY full install
Pretty much the same way I do it too.Keef wrote:DIY Full install:
Mount the ISO (just clicking on it will do)
Click on pup_421.sfs ... but ...
If you are using a 4 series based pup (4.00 to 4.21 or retro 4.3, 4.31) you will be able to mount the sfs as they can read the same squashfile version (3.1).
If you are using a newer pup, you may get a dialogue box suggesting converting it to a compatible version. Do this, as you are extracting the contents anyway and won't need the sfs once you've had your evil way with it.
Once you see the contents of the sfs, copy everything to a partition with enough space - roughly 3 gig I think.
Also copy vmlinuz from the ISO to the same partition - you don't need initrd.gz.
I use Grub4Dos to boot, and the menu.lst entry I have is:
Hope this helps.Code: Select all
title Legacy 04 root (hd0,0) kernel /vmlinuz root=/dev/sda1
unable to mount ext3 formatted hard drive
Hi guys, can someone else please verify if they can mount ext3 formatted hard drive? Legacy OS4 will not mount them for me. Works fine on ext2 format. Popped in TeenPup Mini 2010 and it works fine. Thanks, Rob
P.S. used TeenPup Mini 2010 to boot up, selected full install, put in Legacy OS4 and did install to ext3 format. It will recognize it properly, and boots fine. But then you still can't mount the ext3 formatted home drive. Reformatted that partition to ext2 and then Legacy OS4 allows me to mount it. This is a laptop with IDE hard drive.
P.S. used TeenPup Mini 2010 to boot up, selected full install, put in Legacy OS4 and did install to ext3 format. It will recognize it properly, and boots fine. But then you still can't mount the ext3 formatted home drive. Reformatted that partition to ext2 and then Legacy OS4 allows me to mount it. This is a laptop with IDE hard drive.
thanks
Thanks guys. Must be something wrong with my burn, but it did install properly. Not sure why it doesn't work on mine, but no problems. Ext2 works fine. Just wondered, as TeenPup Mini worked fine with ext3 partitions. What type of hard drives were you guys using? And my reference to home partition was due to previously having pclinuxos on the laptop.
Thanks, Rob
Thanks, Rob
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
LegacyOS will be featured for a short time on the wikki home page
http://puppylinux.org/wikka/HomePage
Don't get jealous you other pupleteers . . .
John's LegacyOS is number 70 on distrowatch.
Is it a fork?
Is it a spoon?
Is it ideal for you?
http://puppylinux.org/wikka/HomePage
Don't get jealous you other pupleteers . . .
John's LegacyOS is number 70 on distrowatch.
Is it a fork?
Is it a spoon?
Is it ideal for you?
Last edited by Lobster on Wed 28 Mar 2012, 04:27, edited 1 time in total.