(old)Puppy Linux Discussion Forum

See this thread...
Changing Palemoon’s profile name
Its content may be important/useful.

1. I have warning [broken link] at:
"/opt/palemoon/palemoon"
"/usr/bin/palemoon"

2. Interresting comments:
a. In http://murga-linux.com/puppy/viewtopic.php?p=1004706#1004706
"For some reason it reverted to the awful /root/.moonchild productions if I didn’t cd in first and then execute palemoon."

b. In http://murga-linux.com/puppy/viewtopic.php?p=1004714#1004714
" I am using a slightly unusual .pet (palemoon with "glibctweak"). Not sure where I got it from, but it runs palemoon from user/lib/palemoon so I modded the application.ini profile to specify that."
I may have installed "palemoon-27.6.2-p4-glibc219tweak.pet".
But I have no "user/lib/palemoon" folder or file.

I hope the above is [potentially] helpful rather than confusing matters.
I'm trying to give you info to warn/inform.

Hi Sylvander,

From the info you provided there's no need to resize. Lack of space in a SaveFile is sometimes why a change can't be preserved. But that's not your situation.

Try making the changes one step at a time, Saving and rebooting between each step as indicated here, http://www.murga-linux.com/puppy/viewto ... 36#1004736.

Keep us posted, especially if after deleting the current palemoon script or symbolic link at /usr/bin [or wherever it is] and Saving it shows up on reboot.

mikesLr

success!

Fingers crossed, all is looking good so far.
All the changes took effect.
Palemoon runs from both the Menu and the terminal command prompt.
I believe I can detect that it is very slightly slower than normal to appear.
The version is 28.0.0 (32-bit).
Aught I to attempt to "Check for Updates" and update [to 28.0.1]?

I first restored a backup of my slackosave and only then completed ALL of your steps, including...
"Perhaps, what he should do is delete the bash/script or symbolic link at /usr/bin..........Save, reboot and then drag /mnt/home/palemoon/palemoon (binary) to that location selecting Link(relative), Save and reboot."

The free space in the slackosave has increased to 645M.

Sylvander wrote:success!
Aught I to attempt to "Check for Updates" and update [to 28.0.1]?...

The free space in the slackosave has increased to 645M.

Congratulations.

Might as well try updating. But note, don't use Menu>Internet>Palemoon-updater if it still exists. (a) It probably won't work; but (b) if it tries to run it was designed to update palemoon at /opt so might just make a mess.

Palemoon 28 and above updates from the Help section at the top of the GUI: Help>About Palemoon>Check for Updates.

There may be some more "clean-up" relating to /opt/Palemoon. If Palemoon-Updater shows on your Menu, browse to /usr/share/applications/ and delete the Palemoon-Updater.desktop.

That file calls /usr/bin/pminstaller.sh. You can delete that as well. However, on my system it showed as "locked". So in order to delete it, you may have to first browse to /tmp/pminstaller.lock and delete it.

Don't worry if the latter two deletions don't "stick". They don't take up much space and after deleting the palemoon-updater.desktop they don't do anything.

By the way, I'm kind of embarrassed. I had forgotten that as of version 28, Palemoon is designed as portable. It wasn't necessary to copy/move Palemoon out of /opt. You could just have downloaded the bzipped tarball from here, https://linux.palemoon.org/ unpacked it and moved the resulting palemoon folder to /mnt/home.

You still would have had to edit the file at /usr/bin to point to palemoon's location. And because you used your old profile, moving it out of /root/, you not only freed up space in your SaveFile, but you didn't have to export bookmarks before deleting /opt/palemoon, then importing them into /mnt/home/palemoon. And if you use addons, you didn't have to install them into your new version.

Edit: Oh, yah You still would have had to delete /opt/palemoon and /root/.moonchild productions and create the symlink there to /mnt/home/palemoon/.moonchild productions. I guess the amount of work either way was about the same.

mikesLr

1.

mikeslr wrote:Might as well try updating.

Completed successfully.
Now version 28.0.1.
I've already saved the changes and rebooted.
Is there any need to make a "Pupsave Hot Backup" of my slackosave?
Any changes caused by the update, that are held within the slackosave?
Or are all the updates made to the files that are now held under the "/mnt/home" folder?

2.

mikeslr wrote:don't use Menu>Internet>Palemoon-updater if it still exists.

It doesn't exist.

3.

mikeslr wrote:Palemoon 28 and above updates from the Help section at the top of the GUI: Help>About Palemoon>Check for Updates.

This is what I used.

4.

mikeslr wrote:I guess the amount of work either way was about the same.

I'm happy with what has been done, and also the successful outcome, so no regrets.

My thanks to ALL for each contribution.

For anyone using the newest version of Palemoon.
Make sure you are using the latest version.

v28.0.1 (2018-08-31)
This is a bugfix point release to address serious performance bottlenecks and general run-time issues (UI slowness, crashes, hangs) with the browser. Once again this impacted 32-bit operating systems more severely than 64-bit ones due to its more limited address space that would get flooded with bogus data.

Still suffering the same Youtube problem/bug with 28.0.1 as I was with 28.0.0;

If playback doesn't begin shortly, try restarting your device

Easily fixed by clicking twice on the pause/play button, then the video starts, but still xxxxing annoying!

Am I alone in getting this? Happens with the first instance of trying to play a Youtube video in every session on every Puppy I've updated to 28.

a_salty_dogg wrote:Am I alone in getting this?

I had no problem playing videos with 28.0.0.
Neither am I having any problem with 28.0.1.
Running on Slacko-5.7.0-pae.

I tell a lie...
I think it was when running 28.0.0...
After playing a certain number of videos [in each new session], they would no longer play.
I don't get that in 28.0.1.

When it happened, I would copy and paste the URL into Slimjet, and run it there.

a_salty_dogg wrote:Still suffering the same Youtube problem/bug with 28.0.1 as I was with 28.0.0;

If playback doesn't begin shortly, try restarting your device

Easily fixed by clicking twice on the pause/play button, then the video starts, but still xxxxing annoying!

Am I alone in getting this? Happens with the first instance of trying to play a Youtube video in every session on every Puppy I've updated to 28.

Do you have media.autoplay.enabled set to false? This toggle is a tradeoff...

• if set "false", annoying HTML5 ads won't autoplay, but Youtube will need extra clicks
• if set "true", annoying HTML5 ads will autoplay, and Youtube will also autoplay

A possible solution is to have a separate profile for viewing Youtube, versus regular browsing.

New release out today:

Pale Moon 28.1.0 has been released. This is a development release focusing on performance, bugfixes and security. More information in the release notes!
http://www.palemoon.org/releasenotes.shtml

Walter Dnes wrote: Do you have media.autoplay.enabled set to false?

Yes many thanks Walter; in the meantime I'd discovered for myself that this config setting is what causes the problem.
I really ought to have returned here straight away to report I'd tracked it down, sorry

I changed this setting deliberately in all my browsers a very long time ago to prevent intrusive video ads on sites from auto-starting, as your bullet-point says.

Has never before affected the playing of Youtube videos in any browser, including in Palemoon prior to v28, though.

In an effort to use bionicpup64 on my poor hardware I was searching for a way of customizing palemoon when opening many tabs at a time: I wanted to prevent the loading of tabs until selected because I have the fiber but opening multiple tabs slow-downs the internet surfing. Opening the tabs when selected solves my problem and make bionicpup64 quite usable on my poor hardware. I have discovered an add-on which makes possible an extreme customization of tabs behaviour:

https://addons.palemoon.org/addon/tab-mix-plus/

I suggest it to you for using newer puppies with poor hardwares.

Running Slacko 64-6.3.2

I downloaded a copy of Palemoon from the Puppy package manager. I did not like it so I unloaded using the Package manager.

Now my 'save-file' is somewhat larger. Apparently some Palemoon files were left behind.

Where would the program have been stored so that I can track down the 'extra' files?

NEW INFORMATION......
I just discovered that Palemoon did NOT unload with the package manager.
It's still there and still runs.... HOW DO I GET RID OF IT?

deleted

HOW DO I GET RID OF IT?

See if there is a Palemoon directory in /opt
If yes.
Delete it.

Do a search in Pfind for palemoon.
Delete anything it finds.

@ orrin:-

Nice to see you're still around..!

Need to delete the following:-

/opt/palemoon
/root/.moonchild productions
/root/.cache/moonchild productions

Also /usr/share/applications (and see if there's a 'palemoon.desktop' file). Delete this, then run
...in the terminal, followed by re-starting 'X'. This will remove the Menu entry for Palemoon. Also /usr/share/pixmaps, too, and delete the Palemoon icon (if there is one).

Please heed bigpup's advice. After you've removed those, run pFind, and see if there's anything else showing. It should all be gone by now, but.....you never know.

----------------------------------

Anytime you un-install a browser (whether automatically or manually), cache & config files always get left behind. Simple reason is that these are not part of the 'installed' package; they're always created at first run of the browser, so the PPM isn't looking for them. It will only remove what was actually installed.

Let us know if any of that helps.


Mike.

I don't know if it is a bug or not, but after downloading couple of files and opening them, the button with the "↓" symbol stops working and then I have to open "Tools>Downloads" window to keep track of what's downloading and/or to open the files, which is very annoying.

Afternoon, all.

For a staunch Chrome man (and increasingly enthusiastic Quantum user), I find I'm playing around with PaleMoon more and more these days. I'm posting this from the current Palemoon 28.1.0 in good old Slacko 560. Yes, I know; technically, it shouldn't be possible.....but I have battleshooter's 'glibc-220-upgrade' running in many of my older Pups. Works, well, too.

I have to confess to being seriously impressed with how smooth this thing is, how fast, and what a light 'pawprint' it has. Does everything I ask of it, with the exception of NetFlix, of course.....but then I have NetFlix running as a desktop 'app' from its Chrome 48 'backend', so that takes care of that..!

For a general browser, it takes some beating. I can see why y'all sing its praises....

-----------------------------------------

I know it's available through the PPM (even says so on the PaleMoon download page....whooo!), but for anybody who wants 'em, here's a couple of .pet packages for Palemoon 28.1.0. 32- and 64-bit are both available.

Navigate through and help yourselves as usual.

https://drive.google.com/drive/folders/ ... sp=sharing

Enjoy.


Mike.

Now, then; here's a curious one. (Or perhaps somebody has a ready-made answer to this one).

PaleMoon 28.1.0 runs fine in Racy 5.5.....whether using my own package (the glibc 2.20 is already installed in the system), or using watchdog's 'glibc-219-tweak' version (which uses its own, self-contained glibc).

Here's the weird part. YouTube runs as smooth as so much oiled silk. Vids playback with no problem at all....okay?

However.....

I regularly listen to music on Radiotunes.com. I have a basic a/c with them which lets me listen to non-stop, ad-free music (without an a/c, you're interrupted every 15 mins with 5 mins of advertising!)

Radiotunes will allow you to use a .pls stream that will play through any media player. I'm using jlst's MPV (originally compiled for Precise, but then a lot of 'Precise' stuff seems to be compatible with Racy). This set-up, playing the .pls stream through MPV, works really well.

If, however, you want to listen in the browser itself, then it's got to be via Flashplayer. No other options are offered; it's Flash or nothing.

Needless to say, the latest version of Flashplayer (31.0.0.108) is available in the correct location for any Mozilla-based browser to find, and use.

Here's the rub. Trying to play music on Radiotunes' website (https://www.radiotunes.com) results in the following banner at the top of the window:-

"Oops, it appears your browser does not support playback of mp3 & m4a audio files necessary to use our service. Please consider trying a different browser for the best playback experience."

Which is friggin' peculiar, considering this same browser plays back on this same site with no issues in every other Pup in t'kennels..!

(Incidentally, I also have watchdog's FF45.9 esr (with glibc 'tweak') running in Racy. It, too, displays the same error message on the Radiotunes site. Coincidence...?

Chrome, of course, plays back w/out issue.... YouTube, obviously, is HTML5, and has been for some time now. PaleMoon (and FF45.9 esr) both have no problems here. It's just Flashplayer, seemingly.)

This isn't a 'deal-breaker', given that I can make use of the site's .pls stream. But it is somewhat frustrating.

Anyone have any 'insights' that might help with this one?


Mike.

Mike Walsh wrote: Here's the rub. Trying to play music on Radiotunes' website (https://www.radiotunes.com) results in the following banner at the top of the window:-

"Oops, it appears your browser does not support playback of mp3 & m4a audio files necessary to use our service. Please consider trying a different browser for the best playback experience."

Currently in Stretch 7.5, I am running Palemoon 28.1.0. Never used Radiotunes before. I clicked your link and selected the Classic Rock item, had a listen to Led Zeppelin - Going to California, no messages displayed. Flashplayer is installed.

I've mainly been using Palemoon for the last little while, runs well and seems to have the least issues currently for me. I've recently customized a start.me home page.

Edit: just created a free account. So thanks Mike.