(old)Puppy Linux Discussion Forum

READ-ONLY Archive
https://oldforum.puppylinux.com/

Wine

https://oldforum.puppylinux.com/viewtopic.php?t=53675

Page 5 of 24

Wine 1.3.0

Posted: Sat 21 Aug 2010, 03:10
by green_dome
my attempt at compiling wine 1.3.0

wine-1.3.0-i486.pet (release 1) - (mirror 1)
wine_DEV-1.3.0-i486.pet (release 1) (development package) - (mirror 1)
wine_DOC-1.3.0-i486.pet (release 1) (documentation package) - (mirror 1)
wine-1.3.0-i486-sfs3.sfs (release 1) - (mirror 1)
wine-1.3.0-i486-sfs4.sfs (release 1) - (mirror 1)

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at (http://puppylinux.asia/) require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

esound_DEV-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

fontconfig-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

fontconfig_DEV-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

gnutls+deps-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

gnutls+deps_DEV-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

jack-audio-connection-kit-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

jack-audio-connection-kit_DEV-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

libgphoto2-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

libgphoto2_DEV-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

openldap-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

openldap_DEV-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

xorg_xorg_full_dri-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet)

xorg_xorg_full_dri_DEV-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet)

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Sat 21 Aug 2010, 08:10
by vovchik
Dear green_dome,

Glad you are back. The new version works nicely, as usual, so thanks again.

With kind regards,
vovchik

Wine 1.3.1

Posted: Thu 26 Aug 2010, 00:21
by green_dome
my attempt at compiling wine 1.3.1

wine-1.3.1-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.1-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.1-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.1-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.1-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Fri 27 Aug 2010, 13:18
by lezzloco
green_dome, Excellent as usual, thank you.

Posted: Fri 27 Aug 2010, 14:48
by vovchik
Dear green_dome,

My thanks, too....

With kind regards,
vovchik

wine and puppy 5.1.x

Posted: Sat 04 Sep 2010, 01:45
by scsijon
Hi green_dome,

would it be a burden for you to create an up to date version compatable with the 5.1.x and lucid series, we are at 1.1.43 at present.

I want to see if I can run a couple of programs that are holding me back from a total windows free environment as well as trying to setup our aussie taxpack.

Playdayz and 01micko are the 5.1.x co-ordinators/creators.

Latest thread is:
http://www.murga-linux.com/puppy/viewtopic.php?t=58978

regards and thanks
scsijon

Posted: Sun 05 Sep 2010, 18:38
by lezzloco
Scsijon, I am using the newest .pet from this thread with Puppy 5.1 with no problems

Posted: Sun 05 Sep 2010, 21:56
by green_dome
Scsijon,
It is my understanding that 'Wine 1.1.43' found in ' Lucid Puppy 115' and/or 'LP 116' is the package that I compiled. [1] [2] [3]
Hopefully the newer Wine packages work just as well in Lucid.


References:
[1] http://murga-linux.com/puppy/viewtopic. ... 905#415905
[2] http://murga-linux.com/puppy/viewtopic. ... 261#416261
[3] http://www.murga-linux.com/puppy/viewto ... 909#415909

new wine - 1 3.2

Posted: Mon 06 Sep 2010, 07:08
by vovchik
Dear green_dome,

I don't want to burden you unnecessarily, but Wine 1.3.2 has just been released.

With thanks in advance and kind regards,
vovchik

Posted: Tue 07 Sep 2010, 19:51
by aliG
Hi,

Sorry to be the one asking the stupid questions, but I have problems with this..

System:
Puppy 4.3.1 - new clean install running off a CF card in a IDE adaptor with a mini ITX embedded PC 256Mb RAM 256Mb puppy file, tight VNC server and no monitor.

I downloaded the PET from the link above, verfied OK and installed. - all the menu items appeared but none worked - from the command prompt I tried winecfg - this resulted in the error message in the screen shot below

As I had a clean install I tried installing all the files in green_domes's post above

esound-0.2.41-i486.pet
etc.
etc.
(don't know if I neeed to do this or not?)

But I still get the same error messages. Does anyone have any ideas, it's almost like the PET is corrupted but it decompressed and validated OK so I have no idea.

Thanks
Alison

Posted: Tue 07 Sep 2010, 20:04
by vovchik
Dear AliG,

I have installed all green_dome's versions and they all work. Form your screenshot I smell a corrupt download, since the message was that certain files are either not found (essential ones) or they are too short. Please download and try again. The pet is OK.

With kind regards,
vovchik

Posted: Tue 07 Sep 2010, 20:36
by aliG
Vovchik,

OK download the .PET again - check the MD5 sum I get "8de9f588dfb1641f2c0ea05bd4b60605" this is not the same as the one on the Wuala web page... Tried a couple more times with different MD5 each time!

Tried the SFS file - MD5 sum matches the one on the web - added to boot manager, and I'm up and running.

No idea what the problem with the PET is vs the SFS (perhaps only tempoary) - but thanks for the suggestion. Now I'm off to install my data logger software and learn about serial ports under WINE..

Спа

Wine 1.3.2

Posted: Fri 10 Sep 2010, 03:28
by green_dome
my attempt at compiling wine 1.3.2

wine-1.3.2-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.2-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.2-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.2-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.2-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Fri 10 Sep 2010, 07:42
by vovchik
Dear green_dome,

Works nicely, as usual. Also, thanks for listing your compilation setup, your ./configure line and platform.

With kind regards,
vovchik

Posted: Sun 12 Sep 2010, 21:56
by lezzloco
Also thanks again green_dome, if you ever wondered what people use wine for, this is what I use it for, I run openBVE (a trainsim and the best), it now out performs windoz :D which is Kool

youtube of your wine in action

http://www.youtube.com/watch?v=ObBtzaOCQqA

picture quality is a lot better when not recording at same time, I run at 1280x1024 normally but have to turn the wick down to do the capture.

thanks again LEZZ

wine 1.3.3 release

Posted: Sat 18 Sep 2010, 20:35
by vovchik
Dear green_dome,

It looks like we have a new one:
Wine 1.3.3 Released

September 18, 2010

The Wine development release 1.3.3 is now available.

What's new in this release:

* Improved support for right-to-left text.
* Support for CMYK JPEG images.
* Beginnings of a Game Explorer implementation.
* Improved 64-bit support in MSI.
* Stub inetcpl control panel applet.
* A number of fixes to crypto support.
* Translation updates.
* Various bug fixes.
With thanks in advance,
vovchik

Posted: Wed 22 Sep 2010, 14:55
by axiz
Hi green_dome!. Im trying to compile Wine 1.3.3 with the dib engine for test, when i try it end in kernel 32 dll, the file process.c "fork_and_exec", with error 1, O_CLOEXEC its not defined.
Can you helpme with it?.
PD: Sorry for my english...
AxiZ

Posted: Fri 01 Oct 2010, 03:26
by green_dome
axiz:
I would like to help, but I am not familiar with the dib engine. Sorry.

Wine 1.3.3

Posted: Fri 01 Oct 2010, 03:45
by green_dome
my attempt at compiling wine 1.3.3

wine-1.3.3-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.3-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.3-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.3-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.3-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

nice job

Posted: Fri 01 Oct 2010, 19:15
by vovchik
Dear green_dome,

My usual comments - works nicely on 3.01, 4.10 and Jemimah's Fluppy v. 5. Thanks.

With kind regards,
vovchik
All times are UTC
Page 5 of 24

Powered by phpBB® Forum Software © phpBB Limited