Posted: Fri 18 Jan 2013, 20:19
well X still won't load, even with the adrv, so I'll never know if the wifi works or not.
READ-ONLY Archive
https://oldforum.puppylinux.com/
is the adrv loading?bark_bark_bark wrote:well X still won't load, even with the adrv, so I'll never know if the wifi works or not.
Code: Select all
sfs_load adrv-12.12.sfs
archpupx
when you do:bark_bark_bark wrote:That didn't work at all.
Code: Select all
sfs_load adrv-12.12.sfs
i'd try moving psmouse.ko file inside the folder /lib/modules/3.6.8/misc and:Scooby wrote:it compiles OK and put new psmouse,ko in /usr/lib/modules/3.6.8-1-ARCH/update dir
Code: Select all
depmod -a
modprobe psmouse
dammit, all that hard work no pay off. i'm not sure what to try next man.bark_bark_bark wrote:Actually the adrv automatically loads at start up, it's the fact that the main sfs gives a error when it is being copied to RAM, that could be causing errors.
Code: Select all
sfs_load xadrv-12.12.sfs
archpupx
tried the above, no complaints from modprobestifiling wrote:i'd try moving psmouse.ko file inside the folder /lib/modules/3.6.8/misc and:Scooby wrote:it compiles OK and put new psmouse,ko in /usr/lib/modules/3.6.8-1-ARCH/update dir
and see if modprobe loads it without an error. if so add psmouse to the addlist line in /etc/rc.d/MODULESCONFIG...and reboot, and hopefully it works.Code: Select all
depmod -a modprobe psmouse
Code: Select all
looking at device '/devices/platform/i8042/serio4/input/input1/mouse0':
KERNEL=="mouse0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/platform/i8042/serio4/input/input1':
KERNELS=="input1"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="ETPS/2 Elantech Touchpad"
ATTRS{phys}=="isa0060/serio4/input0"
ATTRS{uniq}==""
ATTRS{properties}=="1"
looking at parent device '/devices/platform/i8042/serio4':
KERNELS=="serio4"
SUBSYSTEMS=="serio"
DRIVERS=="psmouse"
ATTRS{resolution}=="200"
ATTRS{rate}=="100"
ATTRS{bind_mode}=="auto"
ATTRS{resync_time}=="0"
ATTRS{debug}=="0x01"
ATTRS{description}=="i8042 AUX3 port"
ATTRS{paritycheck}=="0x01"
ATTRS{resetafter}=="5"
ATTRS{reg_07}=="0x00"
ATTRS{reg_10}=="0x0b"
ATTRS{reg_11}=="0x00"
ATTRS{reg_20}=="0x45"
ATTRS{reg_21}=="0xff"
ATTRS{reg_22}=="0xff"
ATTRS{reg_23}=="0x00"
ATTRS{reg_24}=="0x00"
ATTRS{reg_25}=="0x00"
ATTRS{reg_26}=="0x00"
ATTRS{protocol}=="ETPS/2"
Code: Select all
103 [ 36.282] (II) LoadModule: "mouse"
104 [ 36.282] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
105 [ 36.282] (II) Module mouse: vendor="X.Org Foundation"
106 [ 36.282] compiled for 1.13.0, module version = 1.8.1
107 [ 36.282] Module class: X.Org XInput Driver
108 [ 36.282] ABI class: X.Org XInput driver, version 18.0
253 [ 37.181] (II) Using input driver 'mouse' for '<default pointer>'
254 [ 37.181] (**) Option "CorePointer" "on"
255 [ 37.181] (**) <default pointer>: always reports core events
256 [ 37.181] (WW) <default pointer>: No Device specified, looking for one...
257 [ 37.246] (II) <default pointer>: Setting Device option to "/dev/psaux"
258 [ 37.246] (--) <default pointer>: Device: "/dev/psaux"
259 [ 37.246] (==) <default pointer>: Protocol: "Auto"
260 [ 37.246] (**) <default pointer>: always reports core events
261 [ 37.246] (**) Option "Device" "/dev/psaux"
262 [ 37.290] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
263 [ 37.290] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
264 [ 37.290] (**) <default pointer>: Buttons: 9
265 [ 37.290] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
266 [ 37.290] (**) <default pointer>: (accel) keeping acceleration scheme 1
267 [ 37.290] (**) <default pointer>: (accel) acceleration profile 0
268 [ 37.290] (**) <default pointer>: (accel) acceleration factor: 2.000
269 [ 37.290] (**) <default pointer>: (accel) acceleration threshold: 4
270 [ 37.290] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
271 [ 37.581] (II) <default pointer>: ps2EnableDataReporting: succeeded
Code: Select all
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ <default pointer> id=6 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ <default keyboard> id=7 [slave keyboard (3)]
only thing i could suggest Scooby, which isn't much help, is...if it works in a traditional puppy, trying to probe that system to find what's making it 'tick'. and then trying to fit those pieces into archpup to see if it works.Scooby wrote:any suggestions? writing rule for udev concerning touchpad?
stif, ( )stifiling wrote:mav,
if you see an idea you don't think will work....wouldn't it saves time if you'd just, voice your issues with it.......sooner?
i mentioned the * in DISTRO_SPECS 2 days ago.
another example of this was in the last thread, after you got the adrv working, and sim implemented it. you mentioned...2 days later "forget the adrive" and gave your reasons, but it's still like..........why'd u wait so long.
"Well now that you've got it all set up, here's some good reasons why you shouldn't use it."
come on man. that deserves a reply of, "Well after all this hard work, I think I'm going to just use it." The same reply as last time.
ok. didn't know the * idea had gone unnoticed. this reply, from 2 days ago, had me thinking maybe u'd seen it.mavrothal wrote:stif, ( )
I'm kind of busy these days (and certainly can not reply or even see every post).
whatever it was on, if you see a bad idea is being worked on, it would be appreciated if u'd voice the issues with it, 'before' it's finished....instead of 'afterwards'.mavrothal wrote:Regarding the older adrv discussion, was in the context of an app-less iso, if I remember correctly and not on a/ydrv itself.
First off, thanks for feedbackstifiling wrote:
only thing i could suggest Scooby, which isn't much help, is...if it works in a traditional puppy, trying to probe that system to find what's making it 'tick'. and then trying to fit those pieces into archpup to see if it works.
is the two finger scrolling a feature on 'newer' laptops? it's not a feature that i use, so i'm not sure if any of my machines are even able to do it.
Code: Select all
Section "Module"
Load "synaptics"
EndSection