Slacko 5.7.1 woof-CE testing
SOLVED in r6157
HerrBert is correct, on the r6089 release acpi does not load, and is not assigned a pid.
It appears that in this version, the network is still being configured during the attempt. That process must finish, and according to Slacko5.7 original, acpid loaded, then CUPS.
A few things look out of order in bootsys.init in comparison between original Slacko5.7 and this 5.7.1 version.
The error generates on line 223 in my eeePC (Intel Atom n270), but should be considered as nearby for other CPU's.
Regards
8Geee
It appears that in this version, the network is still being configured during the attempt. That process must finish, and according to Slacko5.7 original, acpid loaded, then CUPS.
A few things look out of order in bootsys.init in comparison between original Slacko5.7 and this 5.7.1 version.
The error generates on line 223 in my eeePC (Intel Atom n270), but should be considered as nearby for other CPU's.
Regards
8Geee
Last edited by 8Geee on Tue 08 May 2018, 04:35, edited 1 time in total.
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
R6127 also working here on eeePC900a.
A look behind the scene of acpi is that it does load and does not b'cast its pid.
I removed FF28 and loaded FF27-configured as a test, and all is well. Video drivers not needed were also removed... just i915 and i965 remain. Adrive removed. Runs well so far as frugal Pupmode-13. (Gdmap = 465Mb, Gpart =420 of 768Mb)
I also note the new Atheros drivers that were patched in kernel (memory leaks). I will have to test the wifi (ath5k patched) ... eth0 (atl_1e) OK.
Regards
8Geee
A look behind the scene of acpi is that it does load and does not b'cast its pid.
I removed FF28 and loaded FF27-configured as a test, and all is well. Video drivers not needed were also removed... just i915 and i965 remain. Adrive removed. Runs well so far as frugal Pupmode-13. (Gdmap = 465Mb, Gpart =420 of 768Mb)
I also note the new Atheros drivers that were patched in kernel (memory leaks). I will have to test the wifi (ath5k patched) ... eth0 (atl_1e) OK.
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
SOLVED in r6157
patched Ath5k driver working.
MESSAGES reports ASPC not working... OS does not support.
Trivial. Besides thats where the leak is.
I wasn't aware of that situation.
ION: D/L'd the foomatic driver pet by rcrsn51 (see previous posts). Loaded OK... things went where they are expected to go.
I will test this soon. I have a backup plan at hand if problems. In short, transferring etc files for a known good install.
============================================================
*** One little glitch here... the eeePC hot_key file not present in this spin. In checking out the wifi, I discovered that the "blue light" does not toggle on/off. A search using pfind did not find any files with 'eeepc'. Other tests indicate the wifi is on or off... but with light always on, well, its a bit disconcerting.
file names from k3.4.82 original slacko5.7
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-laptop.ko
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-wmi.ko
There are other files/directories located in /sys/bus/*
I don't know if these are taken/copied from the .ko files above. ***
============================================================
Regards
8Geee
MESSAGES reports ASPC not working... OS does not support.
Trivial. Besides thats where the leak is.
I wasn't aware of that situation.
ION: D/L'd the foomatic driver pet by rcrsn51 (see previous posts). Loaded OK... things went where they are expected to go.
I will test this soon. I have a backup plan at hand if problems. In short, transferring etc files for a known good install.
============================================================
*** One little glitch here... the eeePC hot_key file not present in this spin. In checking out the wifi, I discovered that the "blue light" does not toggle on/off. A search using pfind did not find any files with 'eeepc'. Other tests indicate the wifi is on or off... but with light always on, well, its a bit disconcerting.
file names from k3.4.82 original slacko5.7
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-laptop.ko
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-wmi.ko
There are other files/directories located in /sys/bus/*
I don't know if these are taken/copied from the .ko files above. ***
============================================================
Regards
8Geee
Last edited by 8Geee on Tue 08 May 2018, 04:34, edited 1 time in total.
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
Firefox Quantum
Hi All,
If you install Mike Walsh's libgtk-3-0_3.4.2_i386_precise.pet, from here, http://murga-linux.com/puppy/viewtopic. ... 764#989764 fredx181's portable-firefox from here http://murga-linux.com/puppy/viewtopic. ... 010#978010 runs.
mikesLr
If you install Mike Walsh's libgtk-3-0_3.4.2_i386_precise.pet, from here, http://murga-linux.com/puppy/viewtopic. ... 764#989764 fredx181's portable-firefox from here http://murga-linux.com/puppy/viewtopic. ... 010#978010 runs.
mikesLr
-
- Posts: 1543
- Joined: Mon 22 Feb 2016, 19:43
Thanks everyone for the support, feedback, and pets.
Thanks for the info 8Geee. From what I can tell, the last "kernel config" with eeepc-laptop and eeepc-wmi was 3.14 so I reuploaded an iso built with 3.14 to older folder for testing... would be curious if this one works for your blue light or not.8Geee wrote:*** One little glitch here... the eeePC hot_key file not present in this spin. In checking out the wifi, I discovered that the "blue light" does not toggle on/off. A search using pfind did not find any files with 'eeepc'. Other tests indicate the wifi is on or off... but with light always on, well, its a bit disconcerting.
file names from k3.4.82 original slacko5.7
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-laptop.ko
/lib/modules/3.4.82/kernel/drivers/platform/x86/eeepc-wmi.ko
There are other files/directories located in /sys/bus/*
I don't know if these are taken/copied from the .ko files above. ***
I tried the k3.14.79 last night, late, the blue light remained on. Not sure what this bug is. Boot manager indicated the 'eeepc_laptop' module was loaded, because I could not add it.
'eeepc_wmi' was not loaded, but would not install because there was no object found. This is also true on k3.4.82 (original).
Don't worry too much about this bug, if the actual.ko iss faulty. The other 99% with non-Atom processors need the k3.18.x more than I need a light on/off.
Regards
8Geee
'eeepc_wmi' was not loaded, but would not install because there was no object found. This is also true on k3.4.82 (original).
Don't worry too much about this bug, if the actual.ko iss faulty. The other 99% with non-Atom processors need the k3.18.x more than I need a light on/off.
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
r6157 fixes certain bugs
Good news on the r6157 version (k3.18.108)
1.) Puppy Universal Install now works 'properly' as in the original slacko5.7 No jumping thru hoops. syslinux reports as version 4.03. During boot up there were funny characters in the name, that has gone. Maybe it was a 'special' version?
2.) Wifi light now toggles on/off other FN+f2. Screen bright/dim always worked (FN+f3 or 4).
Noted that I was using the default puppypc(abcde) numeric login. I had been changing this at first boot... that might be a no-no.
Regardds and thanks
8Geee
1.) Puppy Universal Install now works 'properly' as in the original slacko5.7 No jumping thru hoops. syslinux reports as version 4.03. During boot up there were funny characters in the name, that has gone. Maybe it was a 'special' version?
2.) Wifi light now toggles on/off other FN+f2. Screen bright/dim always worked (FN+f3 or 4).
Noted that I was using the default puppypc(abcde) numeric login. I had been changing this at first boot... that might be a no-no.
Regardds and thanks
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
pcmanfm-1.3.0_plus_deps
I put together a package of pets for "pcmanfm-1.3.0_plus_deps-571" as an alternative or additional filemanager.
If interested, look here:
http://www.murga-linux.com/puppy/viewto ... 305#991305
This filemanager is working very well on 5.7.1
bliss,
festus
If interested, look here:
http://www.murga-linux.com/puppy/viewto ... 305#991305
This filemanager is working very well on 5.7.1
bliss,
festus
Pup-Sys Info 2.8
Elsewhere in the forum, there is a new version of Pup-Sys Info (PSI). This 2.8 version checks for meltdown/spectre using the Tab "Mainboard" --> CPU.
Regards
8Geee
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
r6205
r6205 working well on eeePC-900a. Noted ALSA bugs checked, no harm no foul so far. Everything else seems OK.
Regards
8Geee
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
r6229
k3.18.110 working well here. eeePC900a (Atom n270) has no KB issues, still have not tried printer.
*** Noted SSBD issues mitigation in this kernel.***
As a side-note: check browser caches, and set to the same amount as the Level-2 (L2) on-CPU cache. Setting some of these to zero WILL bork FireFox. I will be testing L1 size shortly. The amounts are in Kb, so values of 512, 1024, or 2048, etc. /side
Some additional Meltdown/Spectre included
***Ext2 mem leak patched ***
ALSA: control: fix a redundant-copy issue
several usbip "racing" fixes
several tcp/ipv4 patches
Regards
8Geee
*** Noted SSBD issues mitigation in this kernel.***
As a side-note: check browser caches, and set to the same amount as the Level-2 (L2) on-CPU cache. Setting some of these to zero WILL bork FireFox. I will be testing L1 size shortly. The amounts are in Kb, so values of 512, 1024, or 2048, etc. /side
Some additional Meltdown/Spectre included
***Ext2 mem leak patched ***
ALSA: control: fix a redundant-copy issue
several usbip "racing" fixes
several tcp/ipv4 patches
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
easytag-2.2.6-i686_571
Edit: I made some adjustments in the post below for slacko-5.7.1, having two versions, one for just the stock-gtk2, and one for using gtk+3.
If anyone using Slacko 5.7.1 is interested in getting "easytag-2.2.6" look here:
http://www.murga-linux.com/puppy/viewtopic.php?t=110576
bliss,
festus
If anyone using Slacko 5.7.1 is interested in getting "easytag-2.2.6" look here:
http://www.murga-linux.com/puppy/viewtopic.php?t=110576
bliss,
festus
Last edited by festus on Sun 27 May 2018, 15:08, edited 1 time in total.
I'm glad to have found this for my older PC and laptop, both IBM/Lenovo, and a later Dell laptop, all of which liked the original Slacko 5.7 . The PC had Slacko 5.7 32 and ran well, but the FF didn't work well on current sites. I intend HD installs of this latest Slacko to see if those machines can have an extended life.
Is this the current thread for Slacko 5.7.1_r6231 questions?
Thanks so much to Sailor for this distro and to all who posted links for pets, etc.
As an update: Just burned a CD and did a full install in an ext2 partition on a 16G flash drive, am posting from it now. Excellent repository selections in PPM, FF runs very fast, and I'll experiment with packages on this install for now.
One odd thing, though: when I used the CD for the first time, and saved the session to the CD, then went to shut down, it asked for a password to exit the session, in a text dialog. I had to force a shut down with the power button.
Great job, Sailor.
Is this the current thread for Slacko 5.7.1_r6231 questions?
Thanks so much to Sailor for this distro and to all who posted links for pets, etc.
As an update: Just burned a CD and did a full install in an ext2 partition on a 16G flash drive, am posting from it now. Excellent repository selections in PPM, FF runs very fast, and I'll experiment with packages on this install for now.
One odd thing, though: when I used the CD for the first time, and saved the session to the CD, then went to shut down, it asked for a password to exit the session, in a text dialog. I had to force a shut down with the power button.
Great job, Sailor.
Dell optiplex 780, Intel Core 2 Duo CPU E7500 @ 2.93GHz, 4g RAM, w/ATI RV620 LE Radeon HD 3450. Currently running a full install of Slacko 6.3.0 ( 32 bit version).
This is becauuse you selected an ext2 file-system for the save. Its easier (with less breakage) to use ext3. No password needed, but not encrypted. Thats what firewalls are for ;o)One odd thing, though: when I used the CD for the first time, and saved the session to the CD, then went to shut down, it asked for a password to exit the session, in a text dialog. I had to force a shut down with the power button.
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
Yep. On the first hard drive install on a Lenovo desktop, there was no such problem. Just trying to save a file on the CD was the only trouble. The usb stick works well on other machines that will boot from usb. I like this version.
Dell optiplex 780, Intel Core 2 Duo CPU E7500 @ 2.93GHz, 4g RAM, w/ATI RV620 LE Radeon HD 3450. Currently running a full install of Slacko 6.3.0 ( 32 bit version).
Running the r6251 version (K3.18.111). Laundry-list of stuff, quite a bit aimed at SSBD. FF27-configured and openssl 1.0.2o installed for the try-out. Posting from this now. I did have a browser lock-up forcing a hard-shutoff. I'll keep in touch if this continues. I loaded the newest FF27-tweak with reduced caches, and had a few tabs open. In my spin this has not been a problem.
There is one bug in this 111-update as fixed in yet another kernel update. IPv4 uses vti4, and it has an override. That override was mistakenly removed in kernels older than 4.16.
vti4: Don't override MTU passed on link creation via IFLA_MTU
is patched in k3.18.112, and comprises the full update.
This 112-update is 2018-05-30.
I may have bumped into this as mentioned above with browser lock-up (ne: IPv4 tunnel fail).
Regards
8Geee
There is one bug in this 111-update as fixed in yet another kernel update. IPv4 uses vti4, and it has an override. That override was mistakenly removed in kernels older than 4.16.
vti4: Don't override MTU passed on link creation via IFLA_MTU
is patched in k3.18.112, and comprises the full update.
This 112-update is 2018-05-30.
I may have bumped into this as mentioned above with browser lock-up (ne: IPv4 tunnel fail).
Regards
8Geee
Linux user #498913 "Some people need to reimagine their thinking."
"Zuckerberg: a large city inhabited by mentally challenged people."
"Zuckerberg: a large city inhabited by mentally challenged people."
As a user report, on a HD installation to a Lenovo vista machine, after a few uses, shut down now reboots instead of powering off. No significant changes were made, only a customization of FF, installation of xine and thunderbird, and the attendant changes to default email and media player in setup.
Dell optiplex 780, Intel Core 2 Duo CPU E7500 @ 2.93GHz, 4g RAM, w/ATI RV620 LE Radeon HD 3450. Currently running a full install of Slacko 6.3.0 ( 32 bit version).
-
- Posts: 1543
- Joined: Mon 22 Feb 2016, 19:43
It looks like the woof-CE slacko 14.0 was recently updated to "5.8CE". I built an iso for testing for it (to the 5.8CE folder).
Some things I noticed so far in it: many apps have been recompiled for slacko 14.0, including inkscapelite (with the rulers fix), e3 and picpuz were removed and lvm2 was added.
Some things I noticed so far in it: many apps have been recompiled for slacko 14.0, including inkscapelite (with the rulers fix), e3 and picpuz were removed and lvm2 was added.