JPilot,SynCE,GnuGP,GPA,LDAP,IMAP,Claws-Mail W/Everything SFS
Posted: Thu 19 Apr 2007, 08:19
I'll have individual pets too, after the squash is tested and no additional changes need to be made to them.
I can't write anymore, feedback welcome.
Instructions:
Copy squash file to where you save session is. Then run 'fixmenus' after loading with a saved session and this squash then restart X to see the menu entries. Enjoy.
Download mobi_214.sfs (~24.7megs)
Download mobi_214.sfs MD5
Do you all want GTKam and GTKPod included also? How about Skype?
*edit, added GTKam, GTKPod AND GpsDRIVE.
Name ideas would be welcome as well. I was thinking MobileDevices_2.14.sfs because of the jpilot and synce.
*edit, went with mobi_214.sfs.
Includes:
Three new wizards under Menu-Setup (works in progress, and not necessarily going under "wizards" just put them there for convenience):
IE Favorite Wizard
Host Wizard
PocketPC Wizard (*read below about 'usepeerdns' or it won't work)
-IE Favorite Wizard was around here in another thread.
-The Host Wizard will download and add/update or remove host entries of advertisers to improve surfing. klhrevolutionist and Mic67 had both mentioned this around here. I looked over the license really well and I think this wizard is ok.
-*The PocketPC Wizard needs password verification and some other fine tuning but it does function ok for testing. If you have a password make sure you get it right. Also make sure you have commented out "usepeerdns" in your /etc/ppp/options file or it will NOT work. Read how to set up Fur after connection, below.
Bluetooth:
bluez-firmware-1.2.pet
bluez-libs-3.9.pet
bluez-utils-3.9.pet
dbus-1.0.2.pet
dbus config was modified to run as 'root' rather than 'messagebususr' (or whatever it was). I DO NOT KNOW if this is a security problem of any kind. Since everything else is running as root, I wouldn't worry too much about it. Unless there are some evil looking people withing 30 feet using bluetooth when you turn yours on or you run a multiuser puppy server of some kind.
Seems to start with either of these:
I have no bluetooth, so don't expect perfect answers but I can try to help people get through it.
GnuPG/GPA:
gnupg-1.4.7.pet
gnupg-2.0.3.pet
gpa-0.7.5.pet
gpgme-1.1.4.pet
libassuan-1.0.1.pet
libgcrypt-1.2.4.pet
libgpg-error-1.5.pet
libksba-1.0.1.pet
pth-2.0.7.pet
J-Pilot (with Bluetooth support compiled [not tested YET]):
jpilot-0.99.9.pet
pilot-link-0.12.2.pet
SynCE
gtk-synce-0.1.pet
FUR-0.4.1.pet
synce-dccm-0.9.1.pet
synce-librapi2-0.9.1.pet (*patched with Fur)
synce-libsynce-0.9.1.pet
synce-rra-0.9.1.pet
synce-serial-0.9.1.pet
You can use Fur like this, after a successful rapi ppp connection:
GTKam
gtkam-0.1.13.pet
libgphoto2-2.2.1.pet
libexif-gtk-0.3.5.pet
gphotofs-0.2.pet
gphoto2-2.2.0.pet
aalib-1.4.0.pet
GTKPod
gtkpod-0.99.4.pet
libgpod-0.3.2.pet
libmp4v2-1.4.1.pet
Claws-Mail
I configured Claws-Mail with all "polite plugins" included by default. By polite, I mean any plugin that does NOT either modify or copy incoming email (att_remover, etc..) and/or make an internet connection by default (rss plugin). btw, at the last minute I noticed compface plugin was left out. DESTDIR must not work on that one. I'll fix that in the final image.
aspell-0.60.5.pet
aspell6-en-6.0-0.pet
claws-mail-2.9.0.pet
compface-1.5.2.pet
db-4.5.20.pet
libetpan-0.49.pet
openldap-2.3.35.pet
PlugIns
attachwarner-0.2.6.pet
att_remover-1.0.5.pet
cachesaver-0.10.4.pet
claws-mail-2.9.0-plugins.pet
fetchinfo-plugin-0.4.18.pet
fontconfig-2.4.2.pet
mailmbox-1.13.pet
newmail-0.0.9.pet
pdf_viewer-0.3.pet
poppler-0.4.2.pet
rssyl-0.12.pet
smime-0.7.pet
synce_plugin-0.7.pet
vcalendar-1.95.pet
I can't write anymore, feedback welcome.
Instructions:
Copy squash file to where you save session is. Then run 'fixmenus' after loading with a saved session and this squash then restart X to see the menu entries. Enjoy.
Download mobi_214.sfs (~24.7megs)
Download mobi_214.sfs MD5
Do you all want GTKam and GTKPod included also? How about Skype?
*edit, added GTKam, GTKPod AND GpsDRIVE.
Name ideas would be welcome as well. I was thinking MobileDevices_2.14.sfs because of the jpilot and synce.
*edit, went with mobi_214.sfs.
Includes:
Three new wizards under Menu-Setup (works in progress, and not necessarily going under "wizards" just put them there for convenience):
IE Favorite Wizard
Host Wizard
PocketPC Wizard (*read below about 'usepeerdns' or it won't work)
-IE Favorite Wizard was around here in another thread.
-The Host Wizard will download and add/update or remove host entries of advertisers to improve surfing. klhrevolutionist and Mic67 had both mentioned this around here. I looked over the license really well and I think this wizard is ok.
-*The PocketPC Wizard needs password verification and some other fine tuning but it does function ok for testing. If you have a password make sure you get it right. Also make sure you have commented out "usepeerdns" in your /etc/ppp/options file or it will NOT work. Read how to set up Fur after connection, below.
Bluetooth:
bluez-firmware-1.2.pet
bluez-libs-3.9.pet
bluez-utils-3.9.pet
dbus-1.0.2.pet
dbus config was modified to run as 'root' rather than 'messagebususr' (or whatever it was). I DO NOT KNOW if this is a security problem of any kind. Since everything else is running as root, I wouldn't worry too much about it. Unless there are some evil looking people withing 30 feet using bluetooth when you turn yours on or you run a multiuser puppy server of some kind.
Seems to start with either of these:
Code: Select all
sh-3.00# dbus-daemon --system
sh-3.00# hcid
sh-3.00#
or:
sh-3.00# dbus-launch --exit-with-session
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-Ri4IJxUbkr,guid=2114154d3e6ee1760e981200462cf51b
DBUS_SESSION_BUS_PID=22649
sh-3.00# hcid
sh-3.00#
GnuPG/GPA:
gnupg-1.4.7.pet
gnupg-2.0.3.pet
gpa-0.7.5.pet
gpgme-1.1.4.pet
libassuan-1.0.1.pet
libgcrypt-1.2.4.pet
libgpg-error-1.5.pet
libksba-1.0.1.pet
pth-2.0.7.pet
J-Pilot (with Bluetooth support compiled [not tested YET]):
jpilot-0.99.9.pet
pilot-link-0.12.2.pet
SynCE
gtk-synce-0.1.pet
FUR-0.4.1.pet
synce-dccm-0.9.1.pet
synce-librapi2-0.9.1.pet (*patched with Fur)
synce-libsynce-0.9.1.pet
synce-rra-0.9.1.pet
synce-serial-0.9.1.pet
You can use Fur like this, after a successful rapi ppp connection:
Code: Select all
mkdir /mnt/ppc
Fur /mnt/ppc
rox /mnt/ppc
Unmount:
fusermount -u /mnt/ppc
gtkam-0.1.13.pet
libgphoto2-2.2.1.pet
libexif-gtk-0.3.5.pet
gphotofs-0.2.pet
gphoto2-2.2.0.pet
aalib-1.4.0.pet
GTKPod
gtkpod-0.99.4.pet
libgpod-0.3.2.pet
libmp4v2-1.4.1.pet
Claws-Mail
I configured Claws-Mail with all "polite plugins" included by default. By polite, I mean any plugin that does NOT either modify or copy incoming email (att_remover, etc..) and/or make an internet connection by default (rss plugin). btw, at the last minute I noticed compface plugin was left out. DESTDIR must not work on that one. I'll fix that in the final image.
aspell-0.60.5.pet
aspell6-en-6.0-0.pet
claws-mail-2.9.0.pet
compface-1.5.2.pet
db-4.5.20.pet
libetpan-0.49.pet
openldap-2.3.35.pet
PlugIns
attachwarner-0.2.6.pet
att_remover-1.0.5.pet
cachesaver-0.10.4.pet
claws-mail-2.9.0-plugins.pet
fetchinfo-plugin-0.4.18.pet
fontconfig-2.4.2.pet
mailmbox-1.13.pet
newmail-0.0.9.pet
pdf_viewer-0.3.pet
poppler-0.4.2.pet
rssyl-0.12.pet
smime-0.7.pet
synce_plugin-0.7.pet
vcalendar-1.95.pet