X-Slacko Slim 4.4r49 (unique, stable, and flexible)

For talk and support relating specifically to Puppy derivatives
Message
Author
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#961 Post by mistfire »

@kuman I make some tweak, i hope it works
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#962 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Basic cache cleaning. This will trigger the cleaner on the following scenario
+ Upon shutdown if the save session was a save file or in multisession mode
+ When periodic save on flash ran or execute save2flash
+ When the free disk memory was below 10%

This also can be run manually by typing this command

Code: Select all

sudo purga-cache.sh
* Premature starting of ircp-tray is fixed
* More bugfixes

Download: https://drive.google.com/file/d/1e-jojA ... sp=sharing
MD5 Checksum: 7c807f1cdbf85ff3e841c2429e0bee7b
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

Test on Acer C720

#963 Post by Volhout »

Hi mistfire,

Tested on Acer C720 (chromebook).
- no audio
- no touchpad
Would have expected this new kernel to support at least the C720 audio.
Thats why I tested this one... Touchpad is a tricky one...

wifi works (frisbee), keyboard, ext. mouse, battery indicator
booted right to the desktop.
bluetooth not tested.

Looks familiar (not much changed since Xslacko-slim 4.2R37 from the looks).
kuman11
Posts: 248
Joined: Tue 26 Dec 2017, 09:32

#964 Post by kuman11 »

mistfire wrote:New X-Slacko Slim iteration released

Changes:
* Basic cache cleaning. This will trigger the cleaner on the following scenario
+ Upon shutdown if the save session was a save file or in multisession mode
+ When periodic save on flash ran or execute save2flash
+ When the free disk memory was below 10%

This also can be run manually by typing this command

Code: Select all

sudo purga-cache.sh
* Premature starting of ircp-tray is fixed
* More bugfixes

Download: https://drive.google.com/file/d/1e-jojA ... sp=sharing


MD5 Checksum: 7c807f1cdbf85ff3e841c2429e0bee7b
mistfire,
it's the improvement?
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#965 Post by mistfire »

@kuman11 yes it is

@Volhaut may I know the name and model of the sound cards and touchpad? Try to swap kernel file and zdrv file with another from other puppies just rename the zdrv file to zdrv_ xslacko_4.4.sfs

By the way at first X-Slacko Slim was looked unchanged however it was improved under the hood.
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

audio and touchpad on C720

#966 Post by Volhout »

Hi mistfire,

Audio needs pulseaudio, the HW is intel.
Touchpad needs intel synaptic, and uses a Cypress chip.

I haven't spend the effort to solve it (I must be capable to do this myself), using PPM.

And after that make a custom keyboard layout for chromebooks are missing the function keys F1...F12.

Once I have it working, I'll let you know.

Volhout
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#967 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Improved package management and SFS loading regarding file associations
* Improved Wine integration. All installed windows program is now under Wine category. Also it has capable to manage wine menu entries and
its file associations when the program is uninstalled or if wine was uninstalled/unloaded


Download: https://drive.google.com/open?id=1Ff99c ... -fc3etlVhl
MD5 Checksum: 286e5f550c93d9a13386dcb09fb7ae84
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#968 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Improved package management, sfs loading, and startup
* Improved stability
* Some fixes in initrd

Download: https://drive.google.com/open?id=1E04F2 ... kTsUKEvvcY
MD5 Checksum: ce063033be2ce540b7701a3ade695b2b
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#969 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Improvements on package management
* Improved full install on puppy installer
* Improved underdog linux

Download: https://drive.google.com/open?id=1J7Cp7 ... f6yajUd1tR
MD5 Checksum: c597303672885d2220957681b8cf9cd2
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#970 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Linux kernel 4.9.175
* Bugfix in sfs_load

Download: https://drive.google.com/open?id=1WFyvV ... 3YF4GtdBUv
MD5 Checksum: 89bc8a445fccf5c1a68daefd3eeb1ec2
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#971 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Rebuilt using new build system
* Improved bluetooth detection and management
* Improved mtp device detection and management (pupmtp replaced gmtp)
* Improved package management
* Added support for Gentoo precompiled package (*.xpak)
* Reduced efi image file size
* Some builtin packages was updated
* With repack builtin package
* Improved Simple Network Setup user interface

Download: https://drive.google.com/open?id=1HQiFT ... OQYxG9oV70
MD5 Checksum: 96b6519c588d489dfaaa75909ab3b65d
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

R31

#972 Post by Volhout »

hi mistfire,

It is some time ago since I actively played with X-slack slim.
Last one I looked at was R21 I think.

Installed R31 on my EEE-PC X101CH and it runs flawless.
Used frisbee to connect to wifi (sns does not work well on this EEE-PC).
Gnome player works well on this hardware. Playing 720p with video acceleration (not possible on this HW).

Will install some packages, and try some more.
Anything you would like me to focus on..?

Feels good to be back....

Volhout
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#973 Post by mistfire »

@Volhaut as of now try to use bluetooth on your pc especially sending files from X-Slacko Slim also try to connect MTP devices and transfer some files
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

Bluetooth

#974 Post by Volhout »

Hi mistfire,

The X101CH has an Atheros AR9285 wireless/Bluetooth chip.
This is recognized (using lspci)
The ATH9K driver is loaded (kernel modules)
But there is no Bluetooth ("no adapters plugged in").

Any tips how I can debug..?

Regards,

Volhout
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#975 Post by mistfire »

@Volhaut use dmesg command
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

MTP connection

#976 Post by Volhout »

Hi mistfire,

used Samsung A6 phone to test MTP.
Phone is recognized, popup launched for both camera and mtpdevice.
Was able to connect to both after many retries.

Camera:
shows folder "store00001" and nothing in it when opening the folder.

MTPdevice:
Shows 2 folders, Card and Phone
The Card folder showed the usual folder list, including DCIM (photo's).
Opening the DCIM folder showed my 2 folders, one of them the Camera folder.
When opening the camera folder (some 2000 pictures) the system froze.

(on my windows PC it slowly builds the folder content, but puppy showed nothing for several minutes. Then I closed off, did not wait if it would do something in an hour or so, the 2000 pictures are roughly 8 gigabytes of data, so my X101CH with 1G ram would definitely choke sometimes.)

Somethin odd: when unmounting popups where shown that data is still to be written to Camera and also for MTPdevice. Odd, I did not perform any write action. These popups never disappeared or timed out.

The retries:
The Camera sometimes refused to mount, even after repeated tries. The MTPdevice did mount more reliable. On my phone I have to enter my login before it allows access on MTP. It looks like the timeout on puppy is somewhat short for someone my age..

Volhout

About dmesg

Code: Select all

# dmesg | grep -i ath
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf98a0000, irq=17
Volhout
Posts: 547
Joined: Sun 28 Dec 2008, 08:41

MTP device and bluetooth

#977 Post by Volhout »

Hi mistfire,

Spend some more time on the 2 items you requested information about.

Bluetooth: I fear I cannot help you there. I have ubuntu installed in the X101CH netbook, and even ubuntu cannot use bluetooth. looked into this through ubuntu forums, and the way to make it work is replace the wifi module, The AT9285 apperntly comes in 2 configurations, one does not support bluetooth. My other laptop (acer C720) does support bluetooth, but had problems booting on X-slacko-slim, I reported earlier about that.

MTP device: in addition to previous mail, when you can contact the android phone it works quite well. I can browse phone and watch video's, pictures, play music, etc....

The ony problem is in connecting the phone. When pulgging in there are several popups for Camera and MTP device. Like it is trying to connect multiple times, or multiple instances of the same phone.
I choose to "quit" the opoup for the camera, and it did not return.
There was a single quick popup with "MTP device lost, and another popup inviting it to mount again.
After 2 or 3 attempts to mount it finally worked.

Once this is achieved, you can mount and unmount (tried some 10 times or so) and all works correct.

It looks like ther is something fishy in the order of thing that need to happen to mount the MTP device. I cannot substanciate this but it looks as if the popup on the phone that asks to allow access related to an earlier try to mount.And that that status was carried over to the popup that actually was successful.

I am hopeing to describe it correctly.

Now I am going to install the UK keyboard, because currently I am searching for incorrectly labeled keys...;)

Volhout
User avatar
01101001b
Posts: 123
Joined: Thu 09 Mar 2017, 01:20
Location: Buenos Aires, Argentina

Re: X-Slacko Slim 4.4r31 (unique, stable, and flexible)

#978 Post by 01101001b »

mistfire wrote:This puplet is very unique compared to other puplets.
Language Pack/Paquete de idioma/Paquet de langues/Sprachpaket/[...]
https://drive.google.com/open?id=1J9F0E ... 6czNwK9aAp

It's indeed a GREAT pup... but I am unable to set it up in spanish. Tried that link to no avail. I tried langpack_woofce_es-20150315.pet and lang_pack_es-0.4-w5 from repo... and failed miserably (not all of them at once, obviously). What am I missing?

Thx in advance.
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#979 Post by mistfire »

@01101001b what application did you want to set in spanish?
mistfire
Posts: 1411
Joined: Wed 05 Nov 2008, 00:35
Location: PH

#980 Post by mistfire »

New X-Slacko Slim iteration released

Changes:
* Correction on file association
* Sanderdog replaced underdog
* Some improvements on package management

Download: https://drive.google.com/open?id=1hwEH- ... 3h3E2VCEcI
MD5 Checksum: 92a2079ec4c9fa9cb80b8b208b59f6a8
Post Reply