Pwireless2 (Version 1.0)
What you say perhaps makes sense, assuming that Pwireless2 was installed intentionally by the user. However, puplet creators are including it by default in some puplets, so Pwireless2 has to behave nicely when no wireless card is there, and when the user is using the old wizard - the startup script may be intentionally disabled.
When I get a chance, I'll download upup and see what the necessary modifications are to get the startup script to run correctly.
When I get a chance, I'll download upup and see what the necessary modifications are to get the startup script to run correctly.
aarf wrote:is there a reason why pwireless-2-beta-2.9.pet cant see the wireless interface in upup458 or should i ask at upup458 thread? pwireless1 and connect wizard both find the wlan0 interface ok.
same issue and solution for quirky008jemimah wrote:Does the file /usr/local/Pwireless2/interface exist?
If no, try running /etc/init.d/Pwireless2 from the command line and see if there are errors.
- GrumpyWolfe
- Posts: 496
- Joined: Mon 27 Nov 2006, 01:12
- Contact:
up and down connections
Hi jemimah
Hope you can give me some idle what may be going on. I built MyWolfe-011 with only Pwireless2 for internet connections. I relly like using ttuuxx alsaplayer with streamer but with the wifi connections going up and down the alsaplayer keeps losing contact. Now unlike before I had to manually reconnect it does it all for me.
Thanks in advance.
Hope you can give me some idle what may be going on. I built MyWolfe-011 with only Pwireless2 for internet connections. I relly like using ttuuxx alsaplayer with streamer but with the wifi connections going up and down the alsaplayer keeps losing contact. Now unlike before I had to manually reconnect it does it all for me.
Thanks in advance.
Live and Let Live
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
- GrumpyWolfe
- Posts: 496
- Joined: Mon 27 Nov 2006, 01:12
- Contact:
Hi jemimah
I am using driver ATH9K for the Atheros wireless card that is in my Acer Aspire one it has the intel atom n450 processor.
edit
Forgot to mention that this is a build I did with woof using your Pwireless-2 2.9 ver
I am using driver ATH9K for the Atheros wireless card that is in my Acer Aspire one it has the intel atom n450 processor.
edit
Forgot to mention that this is a build I did with woof using your Pwireless-2 2.9 ver
Live and Let Live
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
- GrumpyWolfe
- Posts: 496
- Joined: Mon 27 Nov 2006, 01:12
- Contact:
Thank you for the information. For some reason in MyWolfe-010 I did not seam to have as much problem but when I made MyWolofe-011 I removed net_setup and a lot of other internet connection soft ware and was having this interment connections so was just looking for clues.
Again thanks
Again thanks
Live and Let Live
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
- GrumpyWolfe
- Posts: 496
- Joined: Mon 27 Nov 2006, 01:12
- Contact:
yes I am using the 2.6.31.5 so may have to do some thinking on this or wait until 2.6.33.is stable
Live and Let Live
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Code: Select all
Wireless interface not detected
With network wizard works fine. But I am loosing internet connection like every 30 minutes, so I want to try with pwireless but it doesn't work
Network Wizard is off (profiles disable)
My iwconfig:
Code: Select all
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11b ESSID:"thewarhols"
Mode:Managed Frequency:2.437 GHz Access Point: (deleted)
Bit Rate=11 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:(DELETED)
Link Signal level=-130 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
thank you jemimah it works now
I didn't had to put the pwireless in to startup folder. I went to the etc/init.d directory and click it once and since then it work.
But anoter one question. Can I slow down the starting process of pwireless2? It startup to fast- so it doesn't get the connection and it shows me IP adress failed. so I have to start pwireless manually on every start. I tried to set sleep in the startup folder - but it change only the startup of the trace icon but not pwireless.
Thanks
I didn't had to put the pwireless in to startup folder. I went to the etc/init.d directory and click it once and since then it work.
But anoter one question. Can I slow down the starting process of pwireless2? It startup to fast- so it doesn't get the connection and it shows me IP adress failed. so I have to start pwireless manually on every start. I tried to set sleep in the startup folder - but it change only the startup of the trace icon but not pwireless.
Thanks
- battleshooter
- Posts: 1378
- Joined: Wed 14 May 2008, 05:10
- Location: Australia
Hey Jemimah,
Just wanna say I've got all the laptops in house using Pwireless2 and it's awesome! The autoconnect for me is the best thing about it, and second best thing is probably the one click connect/disconnect. Thanks so much Jemimah.
Wireless settings are pretty boring, just mac filtering with no encryption. I should try and set up some form of encryption though...
Battleshooter
Just wanna say I've got all the laptops in house using Pwireless2 and it's awesome! The autoconnect for me is the best thing about it, and second best thing is probably the one click connect/disconnect. Thanks so much Jemimah.
Wireless settings are pretty boring, just mac filtering with no encryption. I should try and set up some form of encryption though...
Battleshooter
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]
- GrumpyWolfe
- Posts: 496
- Joined: Mon 27 Nov 2006, 01:12
- Contact:
Thanks jemimah
I just wish to second that on the pwireless2 I have is as the only way to connect with my new MyWolfe-012 and like is very much. You di d a great job on it.
I just wish to second that on the pwireless2 I have is as the only way to connect with my new MyWolfe-012 and like is very much. You di d a great job on it.
Live and Let Live
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]
Acer Aspire One N450 1.66GHz
[url=http://sourceforge.net/projects/mywolfe/]MyWolfe at Sourceforge[/url]
[url=http://mywolfe.blogspot.com/]MyWolfe Blog[/url]
[url=http://groups.google.com/group/mywolfe-linux]MyWolfe Groups[/url]