Good evening to everyone,
first of all thanks to 666philb for this new version of Puppy, great job.
Manual install to a usb-2.0 stick.
Code: Select all
root# inxi -Fxx
System: Host: puppypc10861 Kernel: 4.14.71 x86_64 bits: 64 gcc: 7.3.0
Desktop: JWM 2.3.7 dm: N/A Distro: bionicpup64 7.9.5
Machine: Device: laptop System: ASUSTeK product: X555LB v: 1.0
Mobo: ASUSTeK model: X555LB v: 1.0
UEFI [Legacy]: American Megatrends v: X555LB.204 date: 01/13/2015
Battery BAT0: charge: 19.1 Wh 93.6% condition: 20.4/37.3 Wh (55%)
volts: 7.6/7.6
model: ASUSTeK X555-50 serial: N/A status: Discharging
CPU: Dual core Intel Core i7-5500U (-MT-MCP-)
arch: Broadwell rev.4 cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9586
clock speeds: min/max: 500/2401 MHz 1: 1186 MHz 2: 1255 MHz
3: 1177 MHz 4: 1244 MHz
Graphics: Card-1: Intel HD Graphics 5500 bus-ID: 00:02.0 chip-ID: 8086:1616
Card-2: NVIDIA GM108M [GeForce 940M]
bus-ID: 04:00.0 chip-ID: 10de:1347
Display Server: X.Org 1.19.6
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.03hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card-1 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:160c
Card-2 Intel Wildcat Point-LP High Def. Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
Sound: Advanced Linux Sound Architecture v: k4.14.71
Network: Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: eth0 state: down
Card-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
driver: ath9k bus-ID: 03:00.0 chip-ID: 168c:0036
IF: wlan0 state: up
Drives: HDD Total Size: 1015.9GB (1.1% used)
ID-1: /dev/sda model: TOSHIBA_MQ01ABD1 size: 1000.2GB serial: N/A
ID-2: /dev/sdb model: Cruzer_Edge size: 15.7GB serial: N/A
RAID: System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 148 Uptime: 2 min Memory: 647.2/11974.0MB
Init: SysVinit v: N/A runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.191 running in urxvt) inxi: 2.3.56
Installed the following packages from PPM and not only:
- gkrellm-2.3.10
- wbar-2.3.4
- nano-3.1 (compiled on Bionicpup)
- bleachbit-2.0
- gsmartcontrol-1.1.3
- tlp-1.1
- EditSFS-2.1.3 (downloaded from this forum)
- RamdiskV2 (downloaded from this forum)
- redshift_gtk-1.11
the only problem encountered until now, is the "Psync not available" warning if I try to synchronize the time using PupClockset but, obviously, Psync is installed and running fine.
bigpup wrote:
On my laptop computer (HP Chromebook 14) the touchpad is
working.
However, mouse/keyboard wizard>Touchpad
Get message
couldn't find synaptics properties. No synaptics driver loaded
So, I can make no touchpad adjustments.
Some time ago I found the following solution on our forum but I do not remember exactly where. Edit the file /etc/X11/xorg.conf removing the # symbol from the beginning of the following lines:
Section "Module"
# Load "synaptics" #loadsynaptics
and
Section "ServerLayout"
# InputDevice "Synaptics Mouse" "AlwaysCore" #serverlayoutsynaptics
add the following section:
Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "SHMConfig" "on"
EndSection
Restart.
[b]We are waves of the same sea, leaves of the same tree, flowers of the same garden.[/b]