Twas taken sooldaolgeezer wrote:Marv, my "bit of effort" remark was meant to add some levity to my report!
Fossapup64-9.0.3 RC
Re: Fossapup64-9.0.1
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
LXDE & LXQt for fossapup64
LXDE & LXQt for fossapup64 ......... provided as ydrv's
Work best if adrv is also present.
LXDE for fossapup64
LXQt for fossapup64
Work best if adrv is also present.
LXDE for fossapup64
LXQt for fossapup64
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 361
- Joined: Fri 27 May 2011, 17:21
- Location: Reading UK
Hello 666philb
I have compiled a kernel, using the kernel-kit, on 901.
It works OK but there are some -Wmissing-prototypes errors from gconf.c when choosing configuration option 2.
This applies to recent kernels and happens with Bionicpup as well.
I assume some part of GTK is missing or needs updating.
I now have Windows 2000 running inside VirtualBox on fossapup64 902. It works surprisingly well. There are two "dumb insolence" issues that had to fight with to get it completely working. I'll explain here in case anyone tries the same thing:
Sound: VirtualBox allows you to choose from ALSA, pulse or OSS for the audio interface to the host. If I choose ALSA there is no audio, but the workaround is to choose pulse and then run: apulse VirtualBox. Then the audio works properly.
Parallel Printer: The manual tells you to connect LPT1 to /dev/lp0 but this doesn't work.
To get it to work I had to compile ppdev.ko and modprobe it to create /dev/parport0 and stop udev from loading lp when something accesses a printer. Then tell VirtualBox to connect LPT1 to /dev/parport0
Now I can print from inside win2k albeit at a leasurely pace.
Many thanks for building FossaPup64, it's doing everything I need. I have already retired my BionicPup64 copies on this box.
I have compiled a kernel, using the kernel-kit, on 901.
It works OK but there are some -Wmissing-prototypes errors from gconf.c when choosing configuration option 2.
This applies to recent kernels and happens with Bionicpup as well.
I assume some part of GTK is missing or needs updating.
I now have Windows 2000 running inside VirtualBox on fossapup64 902. It works surprisingly well. There are two "dumb insolence" issues that had to fight with to get it completely working. I'll explain here in case anyone tries the same thing:
Sound: VirtualBox allows you to choose from ALSA, pulse or OSS for the audio interface to the host. If I choose ALSA there is no audio, but the workaround is to choose pulse and then run: apulse VirtualBox. Then the audio works properly.
Parallel Printer: The manual tells you to connect LPT1 to /dev/lp0 but this doesn't work.
To get it to work I had to compile ppdev.ko and modprobe it to create /dev/parport0 and stop udev from loading lp when something accesses a printer. Then tell VirtualBox to connect LPT1 to /dev/parport0
Now I can print from inside win2k albeit at a leasurely pace.
Many thanks for building FossaPup64, it's doing everything I need. I have already retired my BionicPup64 copies on this box.
peebee wrote:
liblxqt.so.0 is present as a symlink.
LXQt is a no go due to missing dependency liblxqt.so.0. Adding the ydrv overwrites the existing Rox pinboard configuration.LXDE & LXQt for fossapup64 ......... provided as ydrv's
Work best if adrv is also present.
LXDE for fossapup64
LXQt for fossapup64
liblxqt.so.0 is present as a symlink.
I believe zstd is missing from the FossaPup64 build - needed for .zst compressed archives (e.g. as used by ArchLinux).
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I made the mistake of adding the ydrv to check out lxqt after initial boot and creation of a save folder. I performed a clean boot without the save folder and everything appears to be functioning as expected.LXQt is a no go due to missing dependency liblxqt.so.0. Adding the ydrv overwrites the existing Rox pinboard configuration.
liblxqt.so.0 is present as a symlink.
I performed another clean install with LXDE. It works quite well. Thank you.
Very new computer.
Motherboard Vendor: Micro-Star International Co., Ltd.
Product Name: MPG Z390 GAMING PLUS (MS-7B51)
Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz
Core Count: 8
Total RAM: 32106 MB
Graphics card Nvidia GeForce RTX 2060
Only have Ethernet for network connection. No WIFI.
Frugal install of Fossapup64-9.0.2, to external hard drive, formatted ext 3.
Boots normal up to the point of network setup.
Get a bunch of error messages, but it seems to be trying to setup.
(sorry, to many and to quick to read completely).
Computer freezes with a error message about e1000e driver issues.
That is as far as the boot up goes.
Below is the working Ethernet connection, booted in Bionicpup64 8.0
▶—— Network Devices ——◀
Ethernet controller [0200]: Intel Corporation Ethernet Connection (7) I219-V [8086:15bc] (rev 10)
• Kernel Driver: e1000e
• Memory Used: 164.00 KB
• Path: /lib/modules/4.19.23/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
• Driver Version: 3.2.6-k
• Description: Intel(R) PRO/1000 Network Driver
Motherboard Vendor: Micro-Star International Co., Ltd.
Product Name: MPG Z390 GAMING PLUS (MS-7B51)
Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz
Core Count: 8
Total RAM: 32106 MB
Graphics card Nvidia GeForce RTX 2060
Only have Ethernet for network connection. No WIFI.
Frugal install of Fossapup64-9.0.2, to external hard drive, formatted ext 3.
Boots normal up to the point of network setup.
Get a bunch of error messages, but it seems to be trying to setup.
(sorry, to many and to quick to read completely).
Computer freezes with a error message about e1000e driver issues.
That is as far as the boot up goes.
Below is the working Ethernet connection, booted in Bionicpup64 8.0
▶—— Network Devices ——◀
Ethernet controller [0200]: Intel Corporation Ethernet Connection (7) I219-V [8086:15bc] (rev 10)
• Kernel Driver: e1000e
• Memory Used: 164.00 KB
• Path: /lib/modules/4.19.23/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
• Driver Version: 3.2.6-k
• Description: Intel(R) PRO/1000 Network Driver
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 159
- Joined: Sun 01 Mar 2020, 16:17
Testing FossaPup64-9.0.2.
Could not connect to the internet unless I installed my locally available pgprs-s57-6.pet. After installation I could do this posting.
Could not connect to the internet unless I installed my locally available pgprs-s57-6.pet. After installation I could do this posting.
Pup-SysInfo Hardware Report (Summary), Mi 27 Mai 2020
Current Time: 21:53:26
System Uptime: 0d 0h 17m
Load Average: 0.08 0.09 0.08
Processes: 217 total, 3 running
▶—— BASE SYSTEM ——◀
PC Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Motherboard Vendor: ASRock
Product Name: B450 Pro4
BIOS Vendor: American Megatrends Inc.
Version: L3.31
Release Date: 05/31/2019
AMD Ryzen 5 2600X Six-Core Processor
Min/Max Speed: NA/NA MHz
Current Speed of Core 0:4071 MHz, 1:4089 MHz, 2:4081 MHz, 3:4065 MHz, 4:4074 MHz, 5:4033 MHz, 6:4073 MHz, 7:4080 MHz, 8:4083 MHz, 9:4059 MHz, 10:4077 MHz, 11:4011 MHz
Core Count: 6
Thread Count: 12
itlb_multihit:Not affected
l1tf:Not affected
mds:Not affected
meltdown:Not affected
spec_store_bypass:Mitigation: Speculative Store Bypass disabled via prctl and seccomp
swapgs barriers and __user pointer sanitization
spectre_v2:Mitigation: Full AMD retpoline, IBPB: conditional, STIBP: disabled, RSB filling
tsx_async_abort:Not affected
temp1 (radeon) : +50.0 C (high = +NA.0 C, crit = +120.0 C)
temp1 (k10temp) : +44.0 C (high = +NA.0 C, crit = +NA.0 C)
temp2 (k10temp) : +44.0 C (high = +NA.0 C, crit = +NA.0 C)
Personal Storage: RAM Disk
Size Used Free Use%
14G 440M 14G 4%
Memory Allocation:
Total RAM: 16009 MB
Used RAM: 1628 MB
Free RAM: 14381 MB
Buffers: 159 MB
Cached: 891 MB
Total Swap: 11414 MB
Free Swap: 11414 MB
Actual Used RAM: 578 MB Used - (buffers + cached)
Actual Free RAM: 15431 MB Free + (buffers + cached)
Linux Kernel: 5.6.7 (x86_64)
Kernel Version: #1 SMP PREEMPT Sat Apr 25 12:18:24 +08 2020
Build GCC: 9.3.0
Kernel Command Line:
nemesis=off ptimezone=Berlin plang=de_DE.UTF-8 pkeys=de psubdir=PupTest pmedia=atahd pfix=ram
Distro: fossapup64 9.0.2
Window Manager: JWM v2.4.0
Desktop Start: xwin jwm
Development:
Bash: 5.0.16
Geany: 1.36
Gtkdialog: 0.8.4
Perl: 5.30.0
Yad: 0.42.1 (GTK+ 2.24.32)
--
busybox: 1.31.0
dhcpcd: 6.6.2
Glibc: 2.31
OpenSSL: 1.1.1f 31 Mar 2020, built on: Mon Apr 20 11:53:50 2020 UTC
wpa_supplicant: 2.9
Username: root
Language: de_DE.UTF-8
Keyboard: de
Num-Lock: on
Timezone: Europe/Berlin
Firewall: Off (ip_tables not active)
Network Interface: No active interface
Wireless Network: No wireless connection
Boot File System: ext3
Boot Media: atahd
PUPMODE=5
PUPSFS=sda1,ext3,/PupTest/puppy_fossapup64_9.0.2.sfs
PUPSAVE=
▶—— DISPLAY ——◀
Display Specifications:
• Monitor Name: MD30699PU
• Monitor VertRefresh: 60.02 times/s
• Screen Dimensions: 2560x1024 pixels (677x270 millimeters)
• Screen Depth: 24 bits (planes)
Xorg Startup Log (/var/log/Xorg.0.log):
• Xorg Driver in use: radeon
• Loaded Modules: ati dbe dri2 evdev fb fbdevhw glamoregl glx libinput ramdac
• X.Org version: 1.20.8
OpenGL 2D/3D Rendering:
• Direct Rendering: Yes
• Vendor: X.Org
• Renderer: AMD CEDAR (DRM 2.50.0 / 5.6.7, LLVM 9.0.1)
• Version: 3.1 Mesa 20.0.4
VGA controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9]
• Kernel Driver: radeon
• Memory Used by Driver: 1304.00 KB
• Path: /lib/modules/5.6.7/kernel/drivers/gpu/drm/radeon/radeon.ko
• Description: ATI Radeon
• Video RAM: 1024M total, 256M prefetchable
▶—— MULTIMEDIA ——◀
Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller [1022:1457]
• Kernel Driver: snd_hda_intel
• Memory Used: 32.00 KB
• Path: /lib/modules/5.6.7/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller [1022:1457]
• Kernel Driver: snd_hda_intel
• Memory Used: 32.00 KB
• Path: /lib/modules/5.6.7/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver
▶—— NETWORK ——◀
Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
• Kernel Driver: r8169
• Memory Used: 72.00 KB
• Path: /lib/modules/5.6.7/kernel/drivers/net/ethernet/realtek/r8169.ko
• Description: RealTek RTL-8169 Gigabit Ethernet driver
▶—— INPUT DEVICES ——◀
"AT Translated Set 2 keyboard"
"HDA ATI HDMI HDMI/DP,pcm=3"
"HD-Audio Generic Front Headphone"
"HD-Audio Generic Front Mic"
"HD-Audio Generic Line"
"HD-Audio Generic Line Out"
"HD-Audio Generic Rear Mic"
"Logitech Wireless Mouse"
"PC Speaker"
"Power Button"
▶—— PCI DEVICES ——◀
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Root Complex
• VendorID=1022 DeviceID=1450
IOMMU
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh I/O Memory Management Unit
• VendorID=1022 DeviceID=1451
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh PCIe GPP Bridge
• VendorID=1022 DeviceID=1453
• Kernel Driver=pcieport
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh PCIe GPP Bridge
• VendorID=1022 DeviceID=1453
• Kernel Driver=pcieport
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Internal PCIe GPP Bridge 0 to Bus B
• VendorID=1022 DeviceID=1454
• Kernel Driver=pcieport
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-1fh PCIe Dummy Host Bridge
• VendorID=1022 DeviceID=1452
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Internal PCIe GPP Bridge 0 to Bus B
• VendorID=1022 DeviceID=1454
• Kernel Driver=pcieport
SMBus
• Advanced Micro Devices, Inc.
• VendorID=AMD FCH SMBus Controller
• VendorID=1022 DeviceID=790b Rev=59
• Kernel Driver=piix4_smbus
• Kernel Module=i2c_piix4
ISA bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD FCH LPC Bridge
• VendorID=1022 DeviceID=790e Rev=51
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 0
• VendorID=1022 DeviceID=1460
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 1
• VendorID=1022 DeviceID=1461
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 2
• VendorID=1022 DeviceID=1462
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 3
• VendorID=1022 DeviceID=1463
• Kernel Driver=k10temp
• Kernel Module=k10temp
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 4
• VendorID=1022 DeviceID=1464
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 5
• VendorID=1022 DeviceID=1465
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 6
• VendorID=1022 DeviceID=1466
Host bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Data Fabric DeviceID= Device 18h; Function 7
• VendorID=1022 DeviceID=1467
USB controller
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset USB 3.1 XHCI Controller
• VendorID=1022 DeviceID=43d5 Rev=01
• Kernel Driver=xhci_hcd
SATA controller
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset SATA Controller
• VendorID=1022 DeviceID=43c8 Rev=01
• Kernel Driver=ahci
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Bridge
• VendorID=1022 DeviceID=43c6 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
PCI bridge
• Advanced Micro Devices, Inc.
• VendorID=AMD 400 Series Chipset PCIe Port
• VendorID=1022 DeviceID=43c7 Rev=01
• Kernel Driver=pcieport
SATA controller
• ASMedia Technology Inc. ASM1062 Serial ATA Controller
• VendorID=1b21 DeviceID=0612 Rev=02
• Kernel Driver=ahci
Ethernet controller
• Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
• VendorID=10ec DeviceID=8168 Rev=15
• Kernel Driver=r8169
• Kernel Module=r8169
VGA compatible controller
• Advanced Micro Devices, Inc.
• VendorID=AMD/ATI Cedar
• VendorID=Radeon HD 5000/6000/7350/8350 Series
• VendorID=1002 DeviceID=68f9
• Kernel Driver=radeon
• Kernel Module=radeon
Audio device
• Advanced Micro Devices, Inc.
• VendorID=AMD/ATI Cedar HDMI Audio
• VendorID=Radeon HD 5400/6300/7300 Series
• VendorID=1002 DeviceID=aa68
• Kernel Driver=snd_hda_intel
• Kernel Module=snd_hda_intel
Non-Essential Instrumentation
• Advanced Micro Devices, Inc.
• VendorID=AMD Zeppelin/Raven/Raven2 PCIe Dummy Function
• VendorID=1022 DeviceID=145a
Encryption controller
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh Platform Security Processor
• VendorID=1022 DeviceID=1456
• Kernel Driver=ccp
• Kernel Module=ccp
USB controller
• Advanced Micro Devices, Inc.
• VendorID=AMD Zeppelin USB 3.0 Host controller
• VendorID=1022 DeviceID=145f
• Kernel Driver=xhci_hcd
Non-Essential Instrumentation
• Advanced Micro Devices, Inc.
• VendorID=AMD Zeppelin/Renoir PCIe Dummy Function
• VendorID=1022 DeviceID=1455
SATA controller
• Advanced Micro Devices, Inc.
• VendorID=AMD FCH SATA Controller
• VendorID=AHCI mode
• VendorID=1022 DeviceID=7901 Rev=51
• Kernel Driver=ahci
Audio device
• Advanced Micro Devices, Inc.
• VendorID=AMD Family 17h Models 00h-0fh HD Audio Controller
• VendorID=1022 DeviceID=1457
• Kernel Driver=snd_hda_intel
• Kernel Module=snd_hda_intel
▶—— PRINTERS ——◀
DefaultPrinter CUPS-PDF
▶—— SCSI DEVICES ——◀
ATA WDC WD10EZEX-60W Rev: 1A01
ATA WDC WD10EZEX-60W Rev: 1A01
MEDIATEK FLASH DISK Rev: 6225
Seagate Expansion Desk Rev: 0911
▶—— SCSI PARTITIONS ——◀
ATA WDC WD10EZEX-60W – sda: 1000GB
ATA WDC WD10EZEX-60W – sdb: 1000GB
Seagate Expansion Desk – sdd: 3001GB
sda1 ext3 234.7G [ATA WDC WD10EZEX-60W]
sdb1 ext3 249.6G [ATA WDC WD10EZEX-60W]
sdd1 ext3 2.72T [Seagate Expansion Desk]
▶—— SCSI PARTITIONS MOUNTED ——◀
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 231G 108G 111G 50% /mnt/sda1
/dev/sdd1 2,7T 2,1T 498G 81% /mnt/sdd1
▶—— USB DEVICES ——◀
VendorID=1d6b ProductID=0002 Rev=05.06
Manufacturer=Linux 5.6.7 xhci-hcd
Product=xHCI Host Controller
Driver=hub
VendorID=046d ProductID=c534 Rev=29.01
Manufacturer=Logitech
Product=USB Receiver
Driver=usbhid
VendorID=0a92 ProductID=1091 Rev=01.21
Manufacturer=ESI
Product=KeyControl 49+
Driver=snd-usb-audio
VendorID=0e8d ProductID=00a5 Rev=03.00
Manufacturer=MediaTek Inc
Product=Product
Driver=cdc_mbim
Driver=option
Driver=usb-storage
VendorID=1d6b ProductID=0003 Rev=05.06
Manufacturer=Linux 5.6.7 xhci-hcd
Product=xHCI Host Controller
Driver=hub
VendorID=0bc2 ProductID=331a Rev=09.11
Manufacturer=Seagate
Product=Expansion Desk
Driver=uas
VendorID=1d6b ProductID=0002 Rev=05.06
Manufacturer=Linux 5.6.7 xhci-hcd
Product=xHCI Host Controller
Driver=hub
VendorID=fc02 ProductID=0101 Rev=02.50
Product=USB MIDI Interface
Driver=snd-usb-audio
VendorID=1d6b ProductID=0003 Rev=05.06
Manufacturer=Linux 5.6.7 xhci-hcd
Product=xHCI Host Controller
Driver=hub
--
Bus 004 Device 001: ID 1d6b:0003
Bus 003 Device 005: ID fc02:0101 USB MIDI Interface
Bus 003 Device 001: ID 1d6b:0002
Bus 002 Device 002: ID 0bc2:331a Seagate Expansion Desk
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 008: ID 0e8d:00a5 MediaTek Inc Product
Bus 001 Device 002: ID 0a92:1091 ESI KeyControl 49+
Bus 001 Device 003: ID 046d:c534 Logitech USB Receiver
Bus 001 Device 001: ID 1d6b:0002
=== END OF SUMMARY REPORT ===
Our Future Is Not Set In Stone
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
-
- Posts: 159
- Joined: Sun 01 Mar 2020, 16:17
Just to mention in addition to my post above.
I think, all programs that are defined by default as default... programs should be in the base .sfs. Without the use of adrv .sfs some of the default... scripts won't work.
I think, all programs that are defined by default as default... programs should be in the base .sfs. Without the use of adrv .sfs some of the default... scripts won't work.
Our Future Is Not Set In Stone
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
-
- Posts: 159
- Joined: Sun 01 Mar 2020, 16:17
Old version of Rox filer installed in FossaPup64?
Not good.
http://murga-linux.com/puppy/viewtopic. ... 15#1059115
Not good.
http://murga-linux.com/puppy/viewtopic. ... 15#1059115
Our Future Is Not Set In Stone
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
hi O.F.I.N.S.I.S.O.F.I.N.S.I.S. wrote:Old version of Rox filer installed in FossaPup64?
Not good.
http://murga-linux.com/puppy/viewtopic. ... 15#1059115
rox filer has been a pain! the new rox filer has a major problem of missing left button clicks which become really noticeable if you use it a lot.
i was going to use https://github.com/jun7/rox-filer which doesn't miss the clicks and has all the improvements but that has a few different issues. i will have another look at the jun7 one.
also do have a link to the pgprs-s57-6.pet?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
-
- Posts: 159
- Joined: Sun 01 Mar 2020, 16:17
Ok, thanks for the info about Rox filer.
The issue on pgprs in FossaPup appears when it comes to connect.
The output in terminal/window hangs after the first line, so no connection.
The pgprs-s57-6.pet is attached.
The issue on pgprs in FossaPup appears when it comes to connect.
The output in terminal/window hangs after the first line, so no connection.
The pgprs-s57-6.pet is attached.
- Attachments
-
- pgprs-s57-6.pet
- (28.77 KiB) Downloaded 76 times
Our Future Is Not Set In Stone
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
testing
hello Phil
I am using Fossapup about a week now and I am enjoying it a lot.
I just want to report a few thingies that came up and that I've collected during this week:
I like the idea of the big adrv, but... I have it always loaded
because sometimes something small is missing and it turns out to be in the adrv.
I think an example was the Multi Monitor Setup.
Also, there is always a bigger app as well in adrv that I want to use anyway.
I wonder if the recent StackExtra offer from gyro would help here.
I do not always get eth0 internet connection on startup.
Conky is not transparant except for the pristine boot.
(But I do not want it, so I disabled it at Startup.)
The version of psip is 1.41. There is a 1.42 that gives an option to specify the configfile. This version is also needed for BackSeatDriver.
I cannot adjust settings for touchpad (psynclient; synclient works).
On this old laptop the internal mic does not work.
But it's like that with all Puppys, except the one with pulseaudio, dpupbuster from jose.
The (old) help for notecase is lacking. It is difficult to find it nowadays.
I've added it.
This looks to me already RC build.
I have thrown Citrix and Teams at it on an old 2G ram dell laptop and it all works well.
I do have to use pfix=nocopy because Teams is such a memory hogg.
Well done Phil !!
I am using Fossapup about a week now and I am enjoying it a lot.
I just want to report a few thingies that came up and that I've collected during this week:
I like the idea of the big adrv, but... I have it always loaded
because sometimes something small is missing and it turns out to be in the adrv.
I think an example was the Multi Monitor Setup.
Also, there is always a bigger app as well in adrv that I want to use anyway.
I wonder if the recent StackExtra offer from gyro would help here.
I do not always get eth0 internet connection on startup.
Conky is not transparant except for the pristine boot.
(But I do not want it, so I disabled it at Startup.)
The version of psip is 1.41. There is a 1.42 that gives an option to specify the configfile. This version is also needed for BackSeatDriver.
I cannot adjust settings for touchpad (psynclient; synclient works).
On this old laptop the internal mic does not work.
But it's like that with all Puppys, except the one with pulseaudio, dpupbuster from jose.
The (old) help for notecase is lacking. It is difficult to find it nowadays.
I've added it.
This looks to me already RC build.
I have thrown Citrix and Teams at it on an old 2G ram dell laptop and it all works well.
I do have to use pfix=nocopy because Teams is such a memory hogg.
Well done Phil !!
- Attachments
-
- help.ncd.gz
- old help from old notecase
real .gz - (163.36 KiB) Downloaded 73 times
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
@foxpup
I compiled a version of psip-1.42 in FossaPup
pjproject is version 1.16
osxcart version 1.2.0
I included the red phone icon in /usr/share/pixmaps and this is now set as the menu icon.
I included the bell.wav ringtone file in /usr/share/sounds
Uploaded the .pet FOR TESTING purposes
You should be able to install directly over the top of what is in the .iso
http://smokey01.com/OscarTalks/psip-1.4 ... -fossa.pet
@666philb
PPLOG does not work
Installing perl-modules-5.30 from PPM fixes it even though this is reported as "Already Installed".
I compiled a version of psip-1.42 in FossaPup
pjproject is version 1.16
osxcart version 1.2.0
I included the red phone icon in /usr/share/pixmaps and this is now set as the menu icon.
I included the bell.wav ringtone file in /usr/share/sounds
Uploaded the .pet FOR TESTING purposes
You should be able to install directly over the top of what is in the .iso
http://smokey01.com/OscarTalks/psip-1.4 ... -fossa.pet
@666philb
PPLOG does not work
Installing perl-modules-5.30 from PPM fixes it even though this is reported as "Already Installed".
- Attachments
-
- psip1.42fossa.jpg
- PSIP 1.42 compiled and running in FossaPup
- (70.06 KiB) Downloaded 1067 times
Oscar in England
What a surprise Oscar! Thank you!OscarTalks wrote:@foxpup
I compiled a version of psip-1.42 in FossaPup
I already had a pet for 1.42 from somewhere.
Not for a specific Puppy.
I don't remember where from, maybe from Smokey's repos as well.
I just replace the 1.41 binary with this one.
But it is good to have one especially for fossapup.
The different pets install psip in different ways (how to start it) or locations.
By the way, the binary on its own is like portable, you know.
It works for example in Debian as well, puppyphone on Debian.
full install and quickpet
please hold on to the full install option and quickpet!
I have been running bionicpup64 8.0 since it came.
the full install is by far the fastest option - if you look at ram, run hardinfo test and browser speedtest, its far faster than the frugall install and i prefer it by far.
And of course quickpet is a gem!!! only thing i need is that brave browser is in quickpet, so that could be a wish too. the portable Brave and Opera found elsewhere here on the forum, i think by mike walsh, is faster and more low ram than anything else i tried, and testes bether on browsertest -speedbatle, at least on my HP Pavilion g6 laptop.
kind regards Gnimmelf
I have been running bionicpup64 8.0 since it came.
the full install is by far the fastest option - if you look at ram, run hardinfo test and browser speedtest, its far faster than the frugall install and i prefer it by far.
And of course quickpet is a gem!!! only thing i need is that brave browser is in quickpet, so that could be a wish too. the portable Brave and Opera found elsewhere here on the forum, i think by mike walsh, is faster and more low ram than anything else i tried, and testes bether on browsertest -speedbatle, at least on my HP Pavilion g6 laptop.
kind regards Gnimmelf
PGPRS not working?
You have also reported this in the BionicPup64 thread, to which I responded with a request for further information and assistance in my effort to resolve whatever problem you have with the current, rewritten version of pgprs. That response is here:O.F.I.N.S.I.S. wrote:Testing FossaPup64-9.0.2.
Could not connect to the internet unless I installed my locally available pgprs-s57-6.pet. After installation I could do this posting.
http://www.murga-linux.com/puppy/viewto ... 11#1057594
EDIT: Request for pdiag archive retracted. See my next message.
Richard
Last edited by rerwin on Sat 06 Jun 2020, 20:10, edited 1 time in total.
PGPRS not working?
I noticed this after I posted about running pdiag.O.F.I.N.S.I.S. wrote:The issue on pgprs in FossaPup appears when it comes to connect.
The output in terminal/window hangs after the first line, so no connection.
Instead, please look at
/tmp/.gprs_connect.log
to see what should have displayed in the "terminal" window. That should tell us what went wrong. Note that the log is hidden in /tmp.
I am working to correct the failure to show the log in the window.
Richard
Re: PGPRS not working?
While I have been working on an upgrade to pgprs, I have found that the reason for the truncated connect log display is a regression in the behavior of Xdialog's tailbox widget.I wrote:. . .O.F.I.N.S.I.S. wrote:The issue on pgprs in FossaPup appears when it comes to connect.
The output in terminal/window hangs after the first line, so no connection.
I am working to correct the failure to show the log in the window.
I see this issue in FossaPup64, UpupEF and DpupBuster. The tailbox (and logbox) should update the display whenever its input file gets an addition. The updating should stop only when the file is removed or replaced, which is not the case in pgprs.
I cannot find any reports of this problem, so am clueless.
Anyway, as I mentioned before, the log that should display is /tmp/.gprs_connect.log. That should show why pgprs failed for O.F.I.N.S.I.S.
BTW, the version of Xdialog (2.3.1) appears to be the same as in bionicpup64, in which pgprs displays the log correctly. However, the file size of /usr/bin/Xdialog differs considerably between BionicPup64 (89 K (91096 bytes)) and FossaPup64 (85 K (86800 bytes))! They must have been built differently.
Does anyone have any information about the build of Xdialog for recent Puppies?
Richard