Hello!!
Does anybody know how to bring it to work under puppy:
ZTE ZXDSL 852
and
Sagem Fast E3T ?
These are 2 modems of polish Neostrada- both make lot of problem to bing it to work in linux.....
MODEM ZTE ZXDSL 852 and Sagem Fast E3T
Okey I found something:
http://sourceforge.net/projects/ubudsl/
It has ueagle-atm- which should work with ZTE
IT is a ubuntu package. Can I convert it to a pet and use in regular puppy(4.1.3 or 4.3.1)?
http://sourceforge.net/projects/ubudsl/
It has ueagle-atm- which should work with ZTE
IT is a ubuntu package. Can I convert it to a pet and use in regular puppy(4.1.3 or 4.3.1)?
- dukenukeme
- Posts: 12
- Joined: Mon 15 Feb 2010, 07:30
- Contact:
hi
for sagem you just need
-firmware files
-libatm 2.50 or higher
-couple of comands
need to know also if you are on PPPoA or PPPoE
here was some topic on concurent distros (if i may )
http://www.slax.org/forum.php?action=vi ... ight=sagem
http://eagle-usb.org/ueagle-atm/non-fre ... 1.1.tar.gz
http://eagle-usb.org/ueagle-atm/non-fre ... 1.0.tar.gz
-unpack it and copy to
/lib/firmware/ueagle-atm
-TODO where is libatm 250 on puppy?
-do as root
-do the broadband conection (pppoe)
for sagem you just need
-firmware files
-libatm 2.50 or higher
-couple of comands
need to know also if you are on PPPoA or PPPoE
here was some topic on concurent distros (if i may )
http://www.slax.org/forum.php?action=vi ... ight=sagem
-get firmware
there is no need for additional compiling in slax 6.0.x (or puppy plz check )
kernel 2.6.24.x (and up) allready has the module ueagle-atm included
what you need is the firmware
for E4
http://eagle-usb.org/ueagle-atm/non-fre ... 1.0.tar.gz
for E3 and older
http://eagle-usb.org/ueagle-atm/non-fre ... 1.1.tar.gz
and contents to be unpacked in /lib/firmware/ueagle-atm
afterwards if you are using pppoe you need
br2364ctl and libatm1 (dont' know exactly where is source for slax/slackware or puppy )
it then goes like this ,for pppoe
where 8.35 are vpi.vciCode: Select all
sudo modprobe ueagle-atm sudo modprobe br2684 sudo br2684ctl -c 0 -b -a 8.35 sudo ifconfig nas0 up
http://eagle-usb.org/ueagle-atm/non-fre ... 1.1.tar.gz
http://eagle-usb.org/ueagle-atm/non-fre ... 1.0.tar.gz
-unpack it and copy to
/lib/firmware/ueagle-atm
-TODO where is libatm 250 on puppy?
-do as root
Code: Select all
rmmod ueagle-atm
modprobe ueagle-atm
modprobe br2684
br2684ctl -c 0 -b -a 8.35
ifconfig nas0 up
Code: Select all
pppoe-setup
pppoe-start
- dukenukeme
- Posts: 12
- Joined: Mon 15 Feb 2010, 07:30
- Contact:
you need to compile a bit
grab from here: linux-atm-2.5.1.tgz (1.3 MB)
http://sourceforge.net/projects/linux-atm/
grab from here :
e46aebe00b8aff2cac57e517336e45d7 devx_431.sfs
561c83156b4dae5da0b6135b53d8c421 pup-431.iso
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... ppy-4.3.1/
set up puppy so that it loads developer environement
unpack linux-atm-2.5.1.tgz and then
have fun!
(note: when you got sagem working ZTE ZXDSL 852 - conexant?
is just couple of firmare files away from working ... )
NOTE2 in case your provider has PPP over ATM connection ,
no need to compile libatm , i think
http://www.slax.org/forum.php?action=vi ... ight=pppoa
note3 for compiling linux-atm-2.5.1
you may need bison and flex plz check output of ./configure
(and for other that is possibly missing , perhaps it is all allready inside devel.sxs )
grab from here: linux-atm-2.5.1.tgz (1.3 MB)
http://sourceforge.net/projects/linux-atm/
grab from here :
e46aebe00b8aff2cac57e517336e45d7 devx_431.sfs
561c83156b4dae5da0b6135b53d8c421 pup-431.iso
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... ppy-4.3.1/
set up puppy so that it loads developer environement
unpack linux-atm-2.5.1.tgz and then
Code: Select all
./configure
make
make install
(note: when you got sagem working ZTE ZXDSL 852 - conexant?
is just couple of firmare files away from working ... )
NOTE2 in case your provider has PPP over ATM connection ,
no need to compile libatm , i think
http://www.slax.org/forum.php?action=vi ... ight=pppoa
note3 for compiling linux-atm-2.5.1
you may need bison and flex plz check output of ./configure
(and for other that is possibly missing , perhaps it is all allready inside devel.sxs )
[i]A man's got to know his limitations[/i]