How to do a FULL install of Puppy, to an empty HDD (2010)
pfix=ram on hard disc install
After I have installed the distro onto the hard disc, will the pfix=ram option be honoured when I append this to the line in grub? I want Puppy to boot off the hard disc, and then load the whole O/S into RAM.
-
- Posts: 4
- Joined: Mon 21 Dec 2009, 13:10
How to Fully install Puppy to empty HD
Catdude, thanks for this very concise and easy to follow tutorial. I have struggled for a couple of weeks trying to install on a very old Toshiba Satellite 4100XCDT laptop having nuked Win 95 with DBAN HD Wiper. Followed your advice and Puppy is running fast and well. I hope this tutorial stays on this forum and remains easy to find. Top Notch!!
Re: How to Fully install Puppy to empty HD
Hello georgecorkland
Welcome to the kennels.
Thank you for your kind words, and i am glad you found this howto useful.
CatDude
.
Welcome to the kennels.
Thank you for your kind words, and i am glad you found this howto useful.
CatDude
.
- Bronco Billy
- Posts: 122
- Joined: Sun 27 Dec 2009, 05:51
Show Stopper.....
Hi There....
Works a Charm Until Hard Plug Pull then No Boot..... Any Ideas for a Fix? Have a Great day.....
Works a Charm Until Hard Plug Pull then No Boot..... Any Ideas for a Fix? Have a Great day.....
First I wanna thank you for the awesome guide and thank you for Puppy.
I am trying to convert Puppy as a brute terminal for some old PC's, for that I am using this instructions
hxxp://pctsc.ponderworthy.org/downloads/instructions.txt
from the project pc tsc and I can tell you is working like a charm.
My problem is that now I want to do some other things on Puppy and for that I need GCC, I understood that you need an sfs file and also you need to follow the instructions for full HD installation as per the link below
hxxp://www.puppylinux.com/hard-puppy.htm
Sadly after some multiples intents I could not get GCC installed, so I would like to know if someone can help me.
I had done this exactly
or
But the result is the same, nothing when I try gcc [command] on the terminal.
Best regards
I am trying to convert Puppy as a brute terminal for some old PC's, for that I am using this instructions
hxxp://pctsc.ponderworthy.org/downloads/instructions.txt
from the project pc tsc and I can tell you is working like a charm.
My problem is that now I want to do some other things on Puppy and for that I need GCC, I understood that you need an sfs file and also you need to follow the instructions for full HD installation as per the link below
hxxp://www.puppylinux.com/hard-puppy.htm
Sadly after some multiples intents I could not get GCC installed, so I would like to know if someone can help me.
I had done this exactly
Code: Select all
2. Click on the devx_xxx.sfs in a ROX-Filer window to mount it.
3. Open a terminal in the mounted directory.
6. # cp -a --remove-destination ./* /mnt/sda1/
7. # sync
8. Close the terminal.
9. Click on the devx_xxx.sfs file to unmount it
Code: Select all
2. Click on the devx_xxx.sfs in a ROX-Filer window to mount it.
3. Open a terminal in the mounted directory.
6. # cp -a --remove-destination ./* /mnt/home/
7. # sync
8. Close the terminal.
9. Click on the devx_xxx.sfs file to unmount it
Best regards
Thanks!
CatDude, just wanted to thank you for the install tutotial.
Having run Puppy for a while off disk I decided to take the plunge and install to hard disk on an old but function fine Sony Vaio F-480.
Was having trouble getting Puppy to boot until I slowly followed your guide step by step.
Worked first time and I'm blown away with the speed and new life breathed into a box that had virtually slowed to a crawl with Win98.
Can't think of a better way to learn the new world of Linux......
Having run Puppy for a while off disk I decided to take the plunge and install to hard disk on an old but function fine Sony Vaio F-480.
Was having trouble getting Puppy to boot until I slowly followed your guide step by step.
Worked first time and I'm blown away with the speed and new life breathed into a box that had virtually slowed to a crawl with Win98.
Can't think of a better way to learn the new world of Linux......
-
- Posts: 93
- Joined: Sat 04 Oct 2008, 03:24
- Location: arlington texas
I take it you have already done a full install and rebooted.Nehemoth wrote: My problem is that now I want to do some other things on Puppy and for that I need GCC, I understood that you need an sfs file and also you need to follow the instructions for full HD installation as per the link below
hxxp://www.puppylinux.com/hard-puppy.htm
Sadly after some multiples intents I could not get GCC installed, so I would like to know if someone can help me.
Best regards
Download and install the sfs installer pet (link below), run it, it's easier than playing around and off you go (make sure your installing dev EXACTLY matches the version of puppy your running). gcc works!
http://www.murga-linux.com/puppy/viewto ... search_id=
woops wrong link, will fix when found, you want the file "SFS_installer-0.1.pet", it's one of trio's pets.
regards
scsijon
- Insomniacno1
- Posts: 188
- Joined: Fri 24 Jul 2009, 22:43
This is a great guide and is rightfully under sticky, but could someone modify it to show how to install newer version 5.xx.
In my case it would be extrememely good if someone could explain how to install 5.xx onto IBM Thinkpad 570 with 192mb ram and 20GB hdd.
You see 5.xx don\t detect the hdd on startup. 4.xx has no probleme at all.
Thanx in advance
With regards
JBJ
In my case it would be extrememely good if someone could explain how to install 5.xx onto IBM Thinkpad 570 with 192mb ram and 20GB hdd.
You see 5.xx don\t detect the hdd on startup. 4.xx has no probleme at all.
Thanx in advance
With regards
JBJ
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
@CatDude
Hello and good day to you,
Well, I am attempting to do a full install of Lupu 520 onto a Toshiba Satellite 1415-S115 - RAM 512MB - Processor Intel Celeron 2.00GHz - 30 Gigs HDD.
Your excellent tutorial has helped me so much in the past. All was going swell until Image Step 29. Then Lupu 520 deviated.
Here is screen shot of message box I see at Step 29. (Install1.png)
Here is a screen shot of a search for *grub* - It appears that both *grub* and *grub4dos* are installed.
Here is a screen shot of a search for *menu.lst*. - Is this the *menu.lst* to change?
Here is a screen shot of /mnt/sda1/boot - There is no *menu.lst* inside the *grub* folder.
Question: How and Where do I find the appropriate *grub* menu.lst in order to change it according to the message box directions?
I understand that I 'might' find the *menu.lst* at what is called the *top* '/' or /boot/menu.lst
I've looked into *sda1* and into *home* files but cannot locate the grub boot menu.lst. And, as the search indicates, there is only one *menu.lst* found.
I took the *ok* option without correcting the *menu.lst* so currently there is no OS installed but the partitioning is done.
The Live CD of Lupu 520 booted up again with no issues. The bios boot order is set to check the CD drive first for an OS.
(And, yes, I understand there is an issue with what drive name is sighted by the grub and that is why the change needs to happen. I just can't find the menu.lst in order to change it.)
Hello and good day to you,
Well, I am attempting to do a full install of Lupu 520 onto a Toshiba Satellite 1415-S115 - RAM 512MB - Processor Intel Celeron 2.00GHz - 30 Gigs HDD.
Your excellent tutorial has helped me so much in the past. All was going swell until Image Step 29. Then Lupu 520 deviated.
Here is screen shot of message box I see at Step 29. (Install1.png)
Here is a screen shot of a search for *grub* - It appears that both *grub* and *grub4dos* are installed.
Here is a screen shot of a search for *menu.lst*. - Is this the *menu.lst* to change?
Here is a screen shot of /mnt/sda1/boot - There is no *menu.lst* inside the *grub* folder.
Question: How and Where do I find the appropriate *grub* menu.lst in order to change it according to the message box directions?
I understand that I 'might' find the *menu.lst* at what is called the *top* '/' or /boot/menu.lst
I've looked into *sda1* and into *home* files but cannot locate the grub boot menu.lst. And, as the search indicates, there is only one *menu.lst* found.
I took the *ok* option without correcting the *menu.lst* so currently there is no OS installed but the partitioning is done.
The Live CD of Lupu 520 booted up again with no issues. The bios boot order is set to check the CD drive first for an OS.
(And, yes, I understand there is an issue with what drive name is sighted by the grub and that is why the change needs to happen. I just can't find the menu.lst in order to change it.)
- Attachments
-
- Search1_for_Grub.png
- (173.97 KiB) Downloaded 396 times
On the earlier versions of Puppy, the Grub install was included
when running the installer. (step 29 +)
For some obscure reason that is no longer the case.
When the puppy is installed now, it is necessary to click Grub in
the menu and install it.
I always use Legacy Grub.
You would type "/dev/sda1" (no quotes) in the box for where the
grub files go, (I use /dev/sda2 if I have Windows on sda1) and then MBR for where grub goes.
when running the installer. (step 29 +)
For some obscure reason that is no longer the case.
When the puppy is installed now, it is necessary to click Grub in
the menu and install it.
I always use Legacy Grub.
You would type "/dev/sda1" (no quotes) in the box for where the
grub files go, (I use /dev/sda2 if I have Windows on sda1) and then MBR for where grub goes.
Last edited by rjbrewer on Sat 30 Jul 2011, 16:06, edited 2 times in total.
Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
That box is right.Sky Aisling wrote:Thank you, rjbrewer
Is this the box to work with?
Also, I was careful *not* to *save* the pup file on each exit while I was experimenting with various Puppys. Should I check to see if by accident a *save* file was made? or does that make any difference in this situation?
If you had made a save file you would remember it; I'm not even
sure if it's possible with the full install.
When you reboot after installing grub, you can find the menu.lst by
either clicking sda1 or clicking rox and going to /boot/grub/menu.lst.
That's where you would change the title for the boot screen or
the amount of pause time when booting.
Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs