LupQ-510s FINALIZED - Lucid Puppy Quickset edition
Tests with two PC
hi shinobar,
Tests ( two PC)
PC I : AMD2 , Asus M2V, DDR2 1 G, (without Nvidia Driver for GeForce 7600)
TEST I PC I: (Live Cd, Frugal install)
bug n°1 CD >... > "X failed to start xorgwizard"
--- a) I did not use xorgwizard but typed "xwin" (querty) > OK the displayed screen is OK
--- b) Country Settings : fr français > Europe-Paris > UTC > fr 'France) > X server :
=> Menu (fr) : OK
=> Icons : us
--- lang_pack-fr => Icons : OK (fr)
bug n°2 UTC is not good, bad time.
................
Pupsave > reboot
bug n°3 : "X failed to start..." => I typed "xwin" in... AZERTY : OK
-----------------------------------------------
TEST II PC I: Full Install (multi boot): All is OK
Without the bugs of the frugal install.
===============================
TEST III PC II : (AMD Athlon, 514 MB, resolution 1024 X 768) :
Frugal install ... pupsave ... reboot...
All is OK, without bugs
Thanks for your work.
Tests ( two PC)
PC I : AMD2 , Asus M2V, DDR2 1 G, (without Nvidia Driver for GeForce 7600)
TEST I PC I: (Live Cd, Frugal install)
bug n°1 CD >... > "X failed to start xorgwizard"
--- a) I did not use xorgwizard but typed "xwin" (querty) > OK the displayed screen is OK
--- b) Country Settings : fr français > Europe-Paris > UTC > fr 'France) > X server :
=> Menu (fr) : OK
=> Icons : us
--- lang_pack-fr => Icons : OK (fr)
bug n°2 UTC is not good, bad time.
................
Pupsave > reboot
bug n°3 : "X failed to start..." => I typed "xwin" in... AZERTY : OK
-----------------------------------------------
TEST II PC I: Full Install (multi boot): All is OK
Without the bugs of the frugal install.
===============================
TEST III PC II : (AMD Athlon, 514 MB, resolution 1024 X 768) :
Frugal install ... pupsave ... reboot...
All is OK, without bugs
Thanks for your work.
- maxpro4u
- Posts: 293
- Joined: Sat 19 Jun 2010, 18:20
- Location: Rittman,Ohio,USA, In dog years,I'm dead
- Contact:
Taskbar will not go to top. Says config corrupt.
003 works but 004 doesn't.
I have the same issue with lupu 508 +510. 508 will go to top but 510 gives error message -config corrupt.
003 works but 004 doesn't.
I have the same issue with lupu 508 +510. 508 will go to top but 510 gives error message -config corrupt.
Dell D610 1.7M w/1024mb
Testing Slacko and a few others
I'm Max Wachtel and I approve this message.
Registered Linux User #393236
Testing Slacko and a few others
I'm Max Wachtel and I approve this message.
Registered Linux User #393236
mtpaint version
lupq-001-004 has mtpaint version 3.31, same as lupu-510.charlie6 wrote:mtpaint version was 3.34.40 in lupq-003
Is there any problem that led to return back to mtpaint version 3.31 ?
(I noticed it worked nice in lupq-003 even after setup locale to french)
Any possibility to upgrade to 3.34.40 in next lupq?
The lang_support-all-1.5 has version 3.34.40, comes from 431JP.
Do you like mtpaint version 3.34.40 on lupq-005?
re: taskbar at top using jwm
I am not sure it depends or not on the version of lupq and/or lupu.maxpro4u wrote:Taskbar will not go to top. Says config corrupt.
anyway, edit /etc/xdg/templates/_root_.jwmrc.
Comment out or delete two '<corner>...' at line 83 and 89.
Code: Select all
<!-- <Corner>white</Corner> -->
<Outline>black</Outline>
</Active>
<Inactive>
<Text>#aaaaaa</Text>
<Title>#fffa71:#ffda51</Title>
<!-- <Corner>#aaaaaa</Corner> -->
And re-run JWM configuration.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: misc fonts
Hi shinobar,
Got a try on misc_fonts.tar.gz
instead (thought it is -cache in place of -chace)
But...
I got exactly the same message as on top of this page
thanks in advance for your time
Cheers, Charlie
Got a try on misc_fonts.tar.gz
So I got:shinobar wrote: ...Extract the attached and find '/usr/share/fonts/misc'. Place the whole directory 'misc' at the corresponding place.
Code: Select all
#pwd
/usr/share/fonts
#ls
default misc
Here I ranAfter that, you may have to run on the virtual terminal:Code: Select all
fc-chace
Code: Select all
fc-cache
Indeed there it is!You can see them by 'Gfontsel' at the Desktop Applets on the menu.
But...
I got exactly the same message as on top of this page
Code: Select all
.../invalidfont in /findfont.....
Cheers, Charlie
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: mtpaint version
Hi again,
Thanks again!
Cheers, Charlie
Hmmm...For sure I like it ! (thanks Dmitry !) I'm using it quite daily !shinobar wrote:...Do you like mtpaint version 3.34.40 on lupq-005?
Thanks again!
Cheers, Charlie
- maxpro4u
- Posts: 293
- Joined: Sat 19 Jun 2010, 18:20
- Location: Rittman,Ohio,USA, In dog years,I'm dead
- Contact:
Re: re: taskbar at top using jwm
Deleted lines-refresh-re-run-still says config corruptshinobar wrote:I am not sure it depends or not on the version of lupq and/or lupu.maxpro4u wrote:Taskbar will not go to top. Says config corrupt.
anyway, edit /etc/xdg/templates/_root_.jwmrc.
Comment out or delete two '<corner>...' at line 83 and 89.Then, menu > Shutdown > Refresh desktopCode: Select all
<!-- <Corner>white</Corner> --> <Outline>black</Outline> </Active> <Inactive> <Text>#aaaaaa</Text> <Title>#fffa71:#ffda51</Title> <!-- <Corner>#aaaaaa</Corner> -->
And re-run JWM configuration.
I will check config file from 003 and see what is different.
Re: re: taskbar at top using jwm
Does the JWM Configuration Manager leaves /tmp/checklist.temp.*?maxpro4u wrote:Deleted lines-refresh-re-run-still says config corrupt
Or, restart X, and check out the file '/tmp/xerrs.log'.
Or, on the virtual terminal, type:
Code: Select all
jwm -p
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- maxpro4u
- Posts: 293
- Joined: Sat 19 Jun 2010, 18:20
- Location: Rittman,Ohio,USA, In dog years,I'm dead
- Contact:
Re: re: taskbar at top using jwm
here is log fileshinobar wrote:Does the JWM Configuration Manager leaves /tmp/checklist.temp.*?maxpro4u wrote:Deleted lines-refresh-re-run-still says config corrupt
Or, restart X, and check out the file '/tmp/xerrs.log'.
Or, on the virtual terminal, type:Code: Select all
jwm -p
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux puppypc 2.6.33.2 #1 SMP Thu May 27 10:56:32 EST 2010 i686
Kernel command line: PMEDIA=idehd PDEV1=sda5 psubdir=lupq004 pnpbios=off
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@ubuntu.com>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 19 13:50:27 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
(EE) GLX: could not load software renderer
cat: /sys/block/fd0/device/vendor: No such file or directory
cat: /sys/block/fd0/device/model: No such file or directory
/usr/bin/jwm
JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
killall: freememapplet: no process killed
ACPI seems to be supported but not enabled in kernel,
try using acpi=force on next reboot.
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Replacing "NEXTWM="$1"" with "NEXTWM="$1"" (case sensitive) (partial words matched)
Processing: /usr/bin/restartwm
A Total of 1 matches replaced in 1 file searched.
Line: 5 String Found and Replaced
ACPI seems to be supported but not enabled in kernel,
try using acpi=force on next reboot.
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JEXIT="ok"
Generating /root/.icewm/menu...
Generating /root/.jwmrc...
JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
killall: freememapplet: no process killed
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JJWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
Setting up watches.
Watches established.
/usr/local/jwmconfig2/taskbarPlace: line 81: [: too many arguments
EXIT="OK"
[H[2JEXIT="ok"
Update
Updated to lupq-005. Major bugfix: was lost timezone after rebooting PC.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Font issue
Lupq cuts down Dejavu fonts and has only one file, regular sans.charlie6 wrote:using Abiword, bold characters are not bold displayed.
Bold and italic can be displayed on most applications but abiword.
On abiword, Sans bold ok, but Serif bold no.
Abiword can show next patterns of font styles.
Adding font files enables serif bold on abiword. But should we make the main sfs fat only for abiword?. Can it be an additional pet?
Gnumeric can show serif bold with the diet font set on lupq. OpenOffice has no problem because it has its own fonts in the package.
How do you think?
Re: re: taskbar at top using jwm
Try another jwm theme.maxpro4u wrote:JWM: warning: /root/.jwm/jwmrc-theme[8]: invalid tag in Active: Corner
JWM: warning: /root/.jwm/jwmrc-theme[14]: invalid tag in Inactive: Corner
Anyway, the jwmconfig2 is buggy. I can import the improved code from Puppy-431JP(Japanese edition), maybe on next lupq release.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
TEST lupq 005
TEST lupq 005 :
'azerty' and fr_FR (France), (without Nvidia driver GeForce 7600 GT ),AMD AM2
005.iso is good but the live-CD 005 has updated my lupq004 (Full Install) right, directly
and after I get the prompt .
I typed 'xwin' (querty) ... and I get the good screen with 'azerty', Locale (fr_FR) etc...
TimeZone is right.
----------------------------------------------
--- Iron Browser is good, light and displays (with SRWare Iron) an automatic traduction. Very interesting.
--- And Flash (libflashplayer-10.1.82.76 pet ) is running very well with Iron browser
Cheers,
'azerty' and fr_FR (France), (without Nvidia driver GeForce 7600 GT ),AMD AM2
005.iso is good but the live-CD 005 has updated my lupq004 (Full Install) right, directly
and after I get the prompt .
I typed 'xwin' (querty) ... and I get the good screen with 'azerty', Locale (fr_FR) etc...
TimeZone is right.
----------------------------------------------
--- Iron Browser is good, light and displays (with SRWare Iron) an automatic traduction. Very interesting.
--- And Flash (libflashplayer-10.1.82.76 pet ) is running very well with Iron browser
Cheers,
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: Font issue
Hi shinobar,
I agree with you. Better keep sfs tiny.
Thanks having put mtpaint-3.34.40 inside the iso !
Cheers, Charlie
oops! Sorry to not have tried other fonts than Times New roman...!shinobar wrote:...should we make the main sfs fat only for abiword?. Can it be an additional pet?
...How do you think?
I agree with you. Better keep sfs tiny.
Thanks having put mtpaint-3.34.40 inside the iso !
Cheers, Charlie
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: Font issue
double post ...sorry
Type1 fonts
As you know the font set on lupq is dieted.charlie6 wrote:on lupq-003, got this error while opening a .ps file which is readable in pup420.
This the error code I got.
I think it could be a problem of missing installed font, does'nt it?
But intalling the Type1 fonts from that of luci-510 may avoid the problem.
Here is Type1 fonts extracted from quirky-120 and the same as lupu-510.
Will you try it?
It also allows abiword bold serif and roman.
Containing these fonts will enlarge the .iso file 1MB or so...
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Hi Shinobar,
Thanks for lupq-005. It is a better choice for me than lupu 5.1
I have added some patches, which I think will make lupq-005 even better.
Keep up the good work
Olov.
~
Thanks for lupq-005. It is a better choice for me than lupu 5.1
I have added some patches, which I think will make lupq-005 even better.
- freememapplet_tray-2.2-q1.pet
network_tray_ecube-2.4.1.pet
Partview-2.1.pet
.jwmrc-tray
Keep up the good work
Olov.
~
- Attachments
-
- tray.jpg
- (31.49 KiB) Downloaded 512 times
-
- lupq.tar.gz
- (12.59 KiB) Downloaded 438 times
Last edited by ecube on Mon 23 Aug 2010, 02:26, edited 1 time in total.
Partview and etc.
Your partview is much better than Barry's, i think.ecube wrote:
- freememapplet_tray-2.2-q1.pet
network_tray_ecube-2.4.1.pet
Partview-2.1.pet
.jwmrc-tray
Another ones may be of the recent woof, exept network-tray-ecube is a slight different, right?
Next Lucid Puppy 5.1.1 or luci-217, playdays going to follow them, but I have some discussion on the new network-tray and freemem.
As for the jwmconfig2, we have better code on Puppy-431JP(Japanese edition), and i can import it.
Anyway thanks for your contribution.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Network Tray
I personally do not like Bary's new network tray.
Anyway the new trays are now in the recent woof, and becomes the new standard of Puppy and puplets...
- The icon is not familiar. The old icon is common, same as the gtk icon and Windows.
- Too many information on the splash. The old one is simple, more information available with right click.
Anyway the new trays are now in the recent woof, and becomes the new standard of Puppy and puplets...
- Attachments
-
- nettray_woof.png
- Barry's most recent one
- (1.47 KiB) Downloaded 1701 times
-
- nettray_classic.png
- Classic
- (1.02 KiB) Downloaded 1656 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
i agree with you about the free memory applet. the old one was better.
you seem to have an independent idea of where you want things to go, have you considered taking over one of the other distribution pups that are not currently being developed. such as dpup which has a great start but gposil has unfortunately not been back for a while. or spup that barry started, etc? just wondering.
you seem to have an independent idea of where you want things to go, have you considered taking over one of the other distribution pups that are not currently being developed. such as dpup which has a great start but gposil has unfortunately not been back for a while. or spup that barry started, etc? just wondering.